Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 205 insertions, 0 deletions

diff --git a/drivers/macintosh/ans-lcd.c b/drivers/macintosh/ans-lcd.c
new file mode 100644
index 000000000..fa904b24a
--- /dev/null
+++ b/drivers/macintosh/ans-lcd.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * /dev/lcd driver for Apple Network Servers.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/fcntl.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/of.h>
+
+#include <linux/uaccess.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+
+#include "ans-lcd.h"
+
+#define ANSLCD_ADDR		0xf301c000
+#define ANSLCD_CTRL_IX 0x00
+#define ANSLCD_DATA_IX 0x10
+
+static unsigned long anslcd_short_delay = 80;
+static unsigned long anslcd_long_delay = 3280;
+static volatile unsigned char __iomem *anslcd_ptr;
+static DEFINE_MUTEX(anslcd_mutex);
+
+#undef DEBUG
+
+static void
+anslcd_write_byte_ctrl ( unsigned char c )
+{
+#ifdef DEBUG
+	printk(KERN_DEBUG "LCD: CTRL byte: %02x\n",c);
+#endif
+	out_8(anslcd_ptr + ANSLCD_CTRL_IX, c);
+	switch(c) {
+		case 1:
+		case 2:
+		case 3:
+			udelay(anslcd_long_delay); break;
+		default: udelay(anslcd_short_delay);
+	}
+}
+
+static void
+anslcd_write_byte_data ( unsigned char c )
+{
+	out_8(anslcd_ptr + ANSLCD_DATA_IX, c);
+	udelay(anslcd_short_delay);
+}
+
+static ssize_t
+anslcd_write( struct file * file, const char __user * buf, 
+				size_t count, loff_t *ppos )
+{
+	const char __user *p = buf;
+	int i;
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "LCD: write\n");
+#endif
+
+	if (!access_ok(buf, count))
+		return -EFAULT;
+
+	mutex_lock(&anslcd_mutex);
+	for ( i = *ppos; count > 0; ++i, ++p, --count ) 
+	{
+		char c;
+		__get_user(c, p);
+		anslcd_write_byte_data( c );
+	}
+	mutex_unlock(&anslcd_mutex);
+	*ppos = i;
+	return p - buf;
+}
+
+static long
+anslcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	char ch, __user *temp;
+	long ret = 0;
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "LCD: ioctl(%d,%d)\n",cmd,arg);
+#endif
+
+	mutex_lock(&anslcd_mutex);
+
+	switch ( cmd )
+	{
+	case ANSLCD_CLEAR:
+		anslcd_write_byte_ctrl ( 0x38 );
+		anslcd_write_byte_ctrl ( 0x0f );
+		anslcd_write_byte_ctrl ( 0x06 );
+		anslcd_write_byte_ctrl ( 0x01 );
+		anslcd_write_byte_ctrl ( 0x02 );
+		break;
+	case ANSLCD_SENDCTRL:
+		temp = (char __user *) arg;
+		__get_user(ch, temp);
+		for (; ch; temp++) { /* FIXME: This is ugly, but should work, as a \0 byte is not a valid command code */
+			anslcd_write_byte_ctrl ( ch );
+			__get_user(ch, temp);
+		}
+		break;
+	case ANSLCD_SETSHORTDELAY:
+		if (!capable(CAP_SYS_ADMIN))
+			ret =-EACCES;
+		else
+			anslcd_short_delay=arg;
+		break;
+	case ANSLCD_SETLONGDELAY:
+		if (!capable(CAP_SYS_ADMIN))
+			ret = -EACCES;
+		else
+			anslcd_long_delay=arg;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&anslcd_mutex);
+	return ret;
+}
+
+static int
+anslcd_open( struct inode * inode, struct file * file )
+{
+	return 0;
+}
+
+const struct file_operations anslcd_fops = {
+	.write		= anslcd_write,
+	.unlocked_ioctl	= anslcd_ioctl,
+	.open		= anslcd_open,
+	.llseek		= default_llseek,
+};
+
+static struct miscdevice anslcd_dev = {
+	LCD_MINOR,
+	"anslcd",
+	&anslcd_fops
+};
+
+static const char anslcd_logo[] __initconst =
+				"********************"  /* Line #1 */
+				"*      LINUX!      *"  /* Line #3 */
+				"*    Welcome to    *"  /* Line #2 */
+				"********************"; /* Line #4 */
+
+static int __init
+anslcd_init(void)
+{
+	int a;
+	int retval;
+	struct device_node* node;
+
+	node = of_find_node_by_name(NULL, "lcd");
+	if (!node || !of_node_name_eq(node->parent, "gc")) {
+		of_node_put(node);
+		return -ENODEV;
+	}
+	of_node_put(node);
+
+	anslcd_ptr = ioremap(ANSLCD_ADDR, 0x20);
+	
+	retval = misc_register(&anslcd_dev);
+	if(retval < 0){
+		printk(KERN_INFO "LCD: misc_register failed\n");
+		iounmap(anslcd_ptr);
+		return retval;
+	}
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "LCD: init\n");
+#endif
+
+	mutex_lock(&anslcd_mutex);
+	anslcd_write_byte_ctrl ( 0x38 );
+	anslcd_write_byte_ctrl ( 0x0c );
+	anslcd_write_byte_ctrl ( 0x06 );
+	anslcd_write_byte_ctrl ( 0x01 );
+	anslcd_write_byte_ctrl ( 0x02 );
+	for(a=0;a<80;a++) {
+		anslcd_write_byte_data(anslcd_logo[a]);
+	}
+	mutex_unlock(&anslcd_mutex);
+	return 0;
+}
+
+static void __exit
+anslcd_exit(void)
+{
+	misc_deregister(&anslcd_dev);
+	iounmap(anslcd_ptr);
+}
+
+module_init(anslcd_init);
+module_exit(anslcd_exit);
+MODULE_LICENSE("GPL v2");