Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 66 insertions, 0 deletions

diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
new file mode 100644
index 000000000..712edcb3e
--- /dev/null
+++ b/drivers/macintosh/Makefile
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Macintosh-specific device drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_PPC_PMAC)		+= macio_asic.o macio_sysfs.o
+
+obj-$(CONFIG_PMAC_MEDIABAY)	+= mediabay.o
+obj-$(CONFIG_MAC_EMUMOUSEBTN)	+= mac_hid.o
+obj-$(CONFIG_INPUT_ADBHID)	+= adbhid.o
+obj-$(CONFIG_ANSLCD)		+= ans-lcd.o
+
+obj-$(CONFIG_ADB_PMU)		+= via-pmu.o
+obj-$(CONFIG_ADB_PMU_EVENT)	+= via-pmu-event.o
+obj-$(CONFIG_ADB_PMU_LED)	+= via-pmu-led.o
+obj-$(CONFIG_PMAC_BACKLIGHT)	+= via-pmu-backlight.o
+obj-$(CONFIG_ADB_CUDA)		+= via-cuda.o
+obj-$(CONFIG_PMAC_APM_EMU)	+= apm_emu.o
+obj-$(CONFIG_PMAC_SMU)		+= smu.o
+
+obj-$(CONFIG_ADB)		+= adb.o
+obj-$(CONFIG_ADB_MACII)		+= via-macii.o
+obj-$(CONFIG_ADB_IOP)		+= adb-iop.o
+obj-$(CONFIG_ADB_MACIO)		+= macio-adb.o
+
+obj-$(CONFIG_THERM_WINDTUNNEL)	+= therm_windtunnel.o
+obj-$(CONFIG_THERM_ADT746X)	+= therm_adt746x.o
+obj-$(CONFIG_WINDFARM)	        += windfarm_core.o
+obj-$(CONFIG_WINDFARM_PM72)     += windfarm_fcu_controls.o \
+				   windfarm_ad7417_sensor.o \
+				   windfarm_lm75_sensor.o \
+				   windfarm_max6690_sensor.o \
+				   windfarm_pid.o \
+				   windfarm_cpufreq_clamp.o \
+				   windfarm_pm72.o
+obj-$(CONFIG_WINDFARM_RM31)     += windfarm_fcu_controls.o \
+				   windfarm_ad7417_sensor.o \
+				   windfarm_lm75_sensor.o \
+				   windfarm_lm87_sensor.o \
+				   windfarm_max6690_sensor.o \
+				   windfarm_pid.o \
+				   windfarm_cpufreq_clamp.o \
+				   windfarm_rm31.o
+obj-$(CONFIG_WINDFARM_PM81)     += windfarm_smu_controls.o \
+				   windfarm_smu_sensors.o \
+				   windfarm_lm75_sensor.o windfarm_pid.o \
+				   windfarm_cpufreq_clamp.o windfarm_pm81.o
+obj-$(CONFIG_WINDFARM_PM91)     += windfarm_smu_controls.o \
+				   windfarm_smu_sensors.o \
+				   windfarm_lm75_sensor.o windfarm_pid.o \
+				   windfarm_cpufreq_clamp.o windfarm_pm91.o
+obj-$(CONFIG_WINDFARM_PM112)	+= windfarm_pm112.o windfarm_smu_sat.o \
+				   windfarm_smu_controls.o \
+				   windfarm_smu_sensors.o \
+				   windfarm_max6690_sensor.o \
+				   windfarm_lm75_sensor.o windfarm_pid.o
+obj-$(CONFIG_WINDFARM_PM121)	+= windfarm_pm121.o windfarm_smu_sat.o \
+				   windfarm_smu_controls.o \
+				   windfarm_smu_sensors.o \
+				   windfarm_max6690_sensor.o \
+				   windfarm_lm75_sensor.o windfarm_pid.o
+obj-$(CONFIG_PMAC_RACKMETER)	+= rack-meter.o
+
+obj-$(CONFIG_SENSORS_AMS)	+= ams/