kbuild: rust: keep Rust objects out of Clang LTO with inline helpersgrafted

Under `CONFIG_LTO_CLANG` + `CONFIG_RUST_INLINE_HELPERS`, one may hit
`objtool` errors such as:

    vmlinux.o: error: objtool: _R..._3Gsp4boot+0xd6a:
    can't find jump dest instruction at .text._R..._3Gsp4boot+0x1dfd

The reason is that in such builds, the Clang invocation that compiles
the combined Rust plus helpers bitcode emits LLVM bitcode (again) --
the final code generation happens in the linker's LTO step, which the
`-mllvm` trap options passed to Clang do not reach.

This, in turn, means that unreachable traps are missing, and the
impossible paths do not merely fallthrough to the next symbol, but past
the end of their own section, since LTO builds place each function in
its own section.

Thus filter `CC_FLAGS_LTO` out of the Clang invocation, so that it always
emits machine code directly, with the traps in place.

Assisted-by: LLM
Cc: Gary Guo <gary@garyguo.net>
Cc: Boqun Feng <boqun@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 3a2486cc1da5 ("kbuild: rust: provide an option to inline C helpers into Rust")
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260816133233.197500-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

19 files changed, 3720 insertions, 0 deletions

diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
new file mode 100644
index 000000000..c11282a74
--- /dev/null
+++ b/drivers/leds/trigger/Kconfig
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig LEDS_TRIGGERS
+	bool "LED Trigger support"
+	depends on LEDS_CLASS
+	help
+	  This option enables trigger support for the leds class.
+	  These triggers allow kernel events to drive the LEDs and can
+	  be configured via sysfs. If unsure, say Y.
+
+if LEDS_TRIGGERS
+
+config LEDS_TRIGGER_TIMER
+	tristate "LED Timer Trigger"
+	help
+	  This allows LEDs to be controlled by a programmable timer
+	  via sysfs. Some LED hardware can be programmed to start
+	  blinking the LED without any further software interaction.
+	  For more details read Documentation/leds/leds-class.rst.
+
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_ONESHOT
+	tristate "LED One-shot Trigger"
+	help
+	  This allows LEDs to blink in one-shot pulses with parameters
+	  controlled via sysfs.  It's useful to notify the user on
+	  sporadic events, when there are no clear begin and end trap points,
+	  or on dense events, where this blinks the LED at constant rate if
+	  rearmed continuously.
+
+	  It also shows how to use the led_blink_set_oneshot() function.
+
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_DISK
+	bool "LED Disk Trigger"
+	depends on ATA
+	help
+	  This allows LEDs to be controlled by disk activity.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_MTD
+	bool "LED MTD (NAND/NOR) Trigger"
+	depends on MTD
+	help
+	  This allows LEDs to be controlled by MTD activity.
+	  If unsure, say N.
+
+config LEDS_TRIGGER_HEARTBEAT
+	tristate "LED Heartbeat Trigger"
+	help
+	  This allows LEDs to be controlled by a CPU load average.
+	  The flash frequency is a hyperbolic function of the 1-minute
+	  load average.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_BACKLIGHT
+	tristate "LED backlight Trigger"
+	help
+	  This allows LEDs to be controlled as a backlight device: they
+	  turn off and on when the display is blanked and unblanked.
+
+	  If unsure, say N.
+
+config LEDS_TRIGGER_CPU
+	bool "LED CPU Trigger"
+	depends on !PREEMPT_RT
+	help
+	  This allows LEDs to be controlled by active CPUs. This shows
+	  the active CPUs across an array of LEDs so you can see which
+	  CPUs are active on the system at any given moment.
+
+	  If unsure, say N.
+
+config LEDS_TRIGGER_ACTIVITY
+	tristate "LED activity Trigger"
+	help
+	  This allows LEDs to be controlled by an immediate CPU usage.
+	  The flash frequency and duty cycle varies from faint flashes to
+	  intense brightness depending on the instant CPU load.
+	  If unsure, say N.
+
+config LEDS_TRIGGER_GPIO
+	tristate "LED GPIO Trigger"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  This allows LEDs to be controlled by gpio events. It's good
+	  when using gpios as switches and triggering the needed LEDs
+	  from there. Triggers are defined as device properties.
+
+	  If unsure, say N.
+
+config LEDS_TRIGGER_DEFAULT_ON
+	tristate "LED Default ON Trigger"
+	help
+	  This allows LEDs to be initialised in the ON state.
+	  If unsure, say Y.
+
+comment "iptables trigger is under Netfilter config (LED target)"
+	depends on LEDS_TRIGGERS
+
+config LEDS_TRIGGER_TRANSIENT
+	tristate "LED Transient Trigger"
+	help
+	  This allows one time activation of a transient state on
+	  GPIO/PWM based hardware.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_CAMERA
+	tristate "LED Camera Flash/Torch Trigger"
+	help
+	  This allows LEDs to be controlled as a camera flash/torch device.
+	  This enables direct flash/torch on/off by the driver, kernel space.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_PANIC
+	bool "LED Panic Trigger"
+	help
+	  This allows LEDs to be configured to blink on a kernel panic.
+	  Enabling this option will allow to mark certain LEDs as panic indicators,
+	  allowing to blink them on a kernel panic, even if they are set to
+	  a different trigger.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_NETDEV
+	tristate "LED Netdev Trigger"
+	depends on NET
+	help
+	  This allows LEDs to be controlled by network device activity.
+	  If unsure, say Y.
+
+config LEDS_TRIGGER_PATTERN
+	tristate "LED Pattern Trigger"
+	help
+	  This allows LEDs to be controlled by a software or hardware pattern
+	  which is a series of tuples, of brightness and duration (ms).
+	  If unsure, say N
+
+config LEDS_TRIGGER_TTY
+	tristate "LED Trigger for TTY devices"
+	depends on TTY
+	help
+	  This allows LEDs to be controlled by activity on ttys which includes
+	  serial devices like /dev/ttyS0.
+
+	  When build as a module this driver will be called ledtrig-tty.
+
+config LEDS_TRIGGER_INPUT_EVENTS
+	tristate "LED Input events trigger"
+	depends on INPUT
+	help
+	  Turn LEDs on when there is input (/dev/input/event*) activity and turn
+	  them back off again after there has been no activity for 5 seconds.
+
+	  This is primarily intended to control LEDs which are a backlight for
+	  capacitive touch-buttons, such as e.g. the menu / home / back buttons
+	  found on the bottom bezel of many older smartphones and tablets.
+
+	  This can also be used to turn on the keyboard backlight LED on
+	  input events and turn the keyboard backlight off again when idle.
+
+	  When build as a module this driver will be called ledtrig-input-events.
+
+endif # LEDS_TRIGGERS
diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
new file mode 100644
index 000000000..3b3628889
--- /dev/null
+++ b/drivers/leds/trigger/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+obj-$(CONFIG_LEDS_TRIGGER_ONESHOT)	+= ledtrig-oneshot.o
+obj-$(CONFIG_LEDS_TRIGGER_DISK)		+= ledtrig-disk.o
+obj-$(CONFIG_LEDS_TRIGGER_MTD)		+= ledtrig-mtd.o
+obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
+obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
+obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+obj-$(CONFIG_LEDS_TRIGGER_CPU)		+= ledtrig-cpu.o
+obj-$(CONFIG_LEDS_TRIGGER_ACTIVITY)	+= ledtrig-activity.o
+obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT)	+= ledtrig-transient.o
+obj-$(CONFIG_LEDS_TRIGGER_CAMERA)	+= ledtrig-camera.o
+obj-$(CONFIG_LEDS_TRIGGER_PANIC)	+= ledtrig-panic.o
+obj-$(CONFIG_LEDS_TRIGGER_NETDEV)	+= ledtrig-netdev.o
+obj-$(CONFIG_LEDS_TRIGGER_PATTERN)	+= ledtrig-pattern.o
+obj-$(CONFIG_LEDS_TRIGGER_TTY)		+= ledtrig-tty.o
+obj-$(CONFIG_LEDS_TRIGGER_INPUT_EVENTS)	+= ledtrig-input-events.o
diff --git a/drivers/leds/trigger/ledtrig-activity.c b/drivers/leds/trigger/ledtrig-activity.c
new file mode 100644
index 000000000..3674bceda
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-activity.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Activity LED trigger
+ *
+ * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
+ * Partially based on Atsushi Nemoto's ledtrig-heartbeat.c.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/panic_notifier.h>
+#include <linux/reboot.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include "../leds.h"
+
+static int panic_detected;
+
+struct activity_data {
+	struct timer_list timer;
+	struct led_classdev *led_cdev;
+	u64 last_used;
+	u64 last_boot;
+	int time_left;
+	int state;
+	int invert;
+};
+
+static void led_activity_function(struct timer_list *t)
+{
+	struct activity_data *activity_data = timer_container_of(activity_data,
+								 t, timer);
+	struct led_classdev *led_cdev = activity_data->led_cdev;
+	unsigned int target;
+	unsigned int usage;
+	int delay;
+	u64 curr_used;
+	u64 curr_boot;
+	s32 diff_used;
+	s32 diff_boot;
+	int cpus;
+	int i;
+
+	if (test_and_clear_bit(LED_BLINK_BRIGHTNESS_CHANGE, &led_cdev->work_flags))
+		led_cdev->blink_brightness = led_cdev->new_blink_brightness;
+
+	if (unlikely(panic_detected)) {
+		/* full brightness in case of panic */
+		led_set_brightness_nosleep(led_cdev, led_cdev->blink_brightness);
+		return;
+	}
+
+	cpus = 0;
+	curr_used = 0;
+
+	for_each_possible_cpu(i) {
+		struct kernel_cpustat kcpustat;
+
+		kcpustat_cpu_fetch(&kcpustat, i);
+
+		curr_used += kcpustat.cpustat[CPUTIME_USER]
+			  +  kcpustat.cpustat[CPUTIME_NICE]
+			  +  kcpustat.cpustat[CPUTIME_SYSTEM]
+			  +  kcpustat.cpustat[CPUTIME_SOFTIRQ]
+			  +  kcpustat.cpustat[CPUTIME_IRQ];
+		cpus++;
+	}
+
+	/* We come here every 100ms in the worst case, so that's 100M ns of
+	 * cumulated time. By dividing by 2^16, we get the time resolution
+	 * down to 16us, ensuring we won't overflow 32-bit computations below
+	 * even up to 3k CPUs, while keeping divides cheap on smaller systems.
+	 */
+	curr_boot = ktime_get_boottime_ns() * cpus;
+	diff_boot = (curr_boot - activity_data->last_boot) >> 16;
+	diff_used = (curr_used - activity_data->last_used) >> 16;
+	activity_data->last_boot = curr_boot;
+	activity_data->last_used = curr_used;
+
+	if (diff_boot <= 0 || diff_used < 0)
+		usage = 0;
+	else if (diff_used >= diff_boot)
+		usage = 100;
+	else
+		usage = 100 * diff_used / diff_boot;
+
+	/*
+	 * Now we know the total boot_time multiplied by the number of CPUs, and
+	 * the total idle+wait time for all CPUs. We'll compare how they evolved
+	 * since last call. The % of overall CPU usage is :
+	 *
+	 *      1 - delta_idle / delta_boot
+	 *
+	 * What we want is that when the CPU usage is zero, the LED must blink
+	 * slowly with very faint flashes that are detectable but not disturbing
+	 * (typically 10ms every second, or 10ms ON, 990ms OFF). Then we want
+	 * blinking frequency to increase up to the point where the load is
+	 * enough to saturate one core in multi-core systems or 50% in single
+	 * core systems. At this point it should reach 10 Hz with a 10/90 duty
+	 * cycle (10ms ON, 90ms OFF). After this point, the blinking frequency
+	 * remains stable (10 Hz) and only the duty cycle increases to report
+	 * the activity, up to the point where we have 90ms ON, 10ms OFF when
+	 * all cores are saturated. It's important that the LED never stays in
+	 * a steady state so that it's easy to distinguish an idle or saturated
+	 * machine from a hung one.
+	 *
+	 * This gives us :
+	 *   - a target CPU usage of min(50%, 100%/#CPU) for a 10% duty cycle
+	 *     (10ms ON, 90ms OFF)
+	 *   - below target :
+	 *      ON_ms  = 10
+	 *      OFF_ms = 90 + (1 - usage/target) * 900
+	 *   - above target :
+	 *      ON_ms  = 10 + (usage-target)/(100%-target) * 80
+	 *      OFF_ms = 90 - (usage-target)/(100%-target) * 80
+	 *
+	 * In order to keep a good responsiveness, we cap the sleep time to
+	 * 100 ms and keep track of the sleep time left. This allows us to
+	 * quickly change it if needed.
+	 */
+
+	activity_data->time_left -= 100;
+	if (activity_data->time_left <= 0) {
+		activity_data->time_left = 0;
+		activity_data->state = !activity_data->state;
+		led_set_brightness_nosleep(led_cdev,
+			(activity_data->state ^ activity_data->invert) ?
+			led_cdev->blink_brightness : LED_OFF);
+	}
+
+	target = (cpus > 1) ? (100 / cpus) : 50;
+
+	if (usage < target)
+		delay = activity_data->state ?
+			10 :                        /* ON  */
+			990 - 900 * usage / target; /* OFF */
+	else
+		delay = activity_data->state ?
+			10 + 80 * (usage - target) / (100 - target) : /* ON  */
+			90 - 80 * (usage - target) / (100 - target);  /* OFF */
+
+
+	if (!activity_data->time_left || delay <= activity_data->time_left)
+		activity_data->time_left = delay;
+
+	delay = min_t(int, activity_data->time_left, 100);
+	mod_timer(&activity_data->timer, jiffies + msecs_to_jiffies(delay));
+}
+
+static ssize_t led_invert_show(struct device *dev,
+                               struct device_attribute *attr, char *buf)
+{
+	struct activity_data *activity_data = led_trigger_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", activity_data->invert);
+}
+
+static ssize_t led_invert_store(struct device *dev,
+                                struct device_attribute *attr,
+                                const char *buf, size_t size)
+{
+	struct activity_data *activity_data = led_trigger_get_drvdata(dev);
+	unsigned long state;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &state);
+	if (ret)
+		return ret;
+
+	activity_data->invert = !!state;
+
+	return size;
+}
+
+static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
+
+static struct attribute *activity_led_attrs[] = {
+	&dev_attr_invert.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(activity_led);
+
+static int activity_activate(struct led_classdev *led_cdev)
+{
+	struct activity_data *activity_data;
+
+	activity_data = kzalloc_obj(*activity_data);
+	if (!activity_data)
+		return -ENOMEM;
+
+	led_set_trigger_data(led_cdev, activity_data);
+
+	activity_data->led_cdev = led_cdev;
+	timer_setup(&activity_data->timer, led_activity_function, 0);
+	if (!led_cdev->blink_brightness)
+		led_cdev->blink_brightness = led_cdev->max_brightness;
+	led_activity_function(&activity_data->timer);
+	set_bit(LED_BLINK_SW, &led_cdev->work_flags);
+
+	return 0;
+}
+
+static void activity_deactivate(struct led_classdev *led_cdev)
+{
+	struct activity_data *activity_data = led_get_trigger_data(led_cdev);
+
+	timer_shutdown_sync(&activity_data->timer);
+	kfree(activity_data);
+	clear_bit(LED_BLINK_SW, &led_cdev->work_flags);
+}
+
+static struct led_trigger activity_led_trigger = {
+	.name       = "activity",
+	.activate   = activity_activate,
+	.deactivate = activity_deactivate,
+	.groups     = activity_led_groups,
+};
+
+static int activity_reboot_notifier(struct notifier_block *nb,
+                                    unsigned long code, void *unused)
+{
+	led_trigger_unregister(&activity_led_trigger);
+	return NOTIFY_DONE;
+}
+
+static int activity_panic_notifier(struct notifier_block *nb,
+                                   unsigned long code, void *unused)
+{
+	panic_detected = 1;
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block activity_reboot_nb = {
+	.notifier_call = activity_reboot_notifier,
+};
+
+static struct notifier_block activity_panic_nb = {
+	.notifier_call = activity_panic_notifier,
+};
+
+static int __init activity_init(void)
+{
+	int rc = led_trigger_register(&activity_led_trigger);
+
+	if (!rc) {
+		atomic_notifier_chain_register(&panic_notifier_list,
+					       &activity_panic_nb);
+		register_reboot_notifier(&activity_reboot_nb);
+	}
+	return rc;
+}
+
+static void __exit activity_exit(void)
+{
+	unregister_reboot_notifier(&activity_reboot_nb);
+	atomic_notifier_chain_unregister(&panic_notifier_list,
+					 &activity_panic_nb);
+	led_trigger_unregister(&activity_led_trigger);
+}
+
+module_init(activity_init);
+module_exit(activity_exit);
+
+MODULE_AUTHOR("Willy Tarreau <w@1wt.eu>");
+MODULE_DESCRIPTION("Activity LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-backlight.c b/drivers/leds/trigger/ledtrig-backlight.c
new file mode 100644
index 000000000..e67bc7c2a
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-backlight.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Backlight emulation LED trigger
+ *
+ * Copyright 2008 (C) Rodolfo Giometti <giometti@linux.it>
+ * Copyright 2008 (C) Eurotech S.p.A. <info@eurotech.it>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+#define BLANK		1
+#define UNBLANK		0
+
+struct bl_trig_notifier {
+	struct led_classdev *led;
+	int brightness;
+	int old_status;
+	unsigned invert;
+
+	struct list_head entry;
+};
+
+static DEFINE_MUTEX(ledtrig_backlight_list_mutex);
+static LIST_HEAD(ledtrig_backlight_list);
+
+static void ledtrig_backlight_notify_blank(struct bl_trig_notifier *n, int new_status)
+{
+	struct led_classdev *led = n->led;
+
+	if (new_status == n->old_status)
+		return;
+
+	if ((n->old_status == UNBLANK) ^ n->invert) {
+		n->brightness = led->brightness;
+		led_set_brightness_nosleep(led, LED_OFF);
+	} else {
+		led_set_brightness_nosleep(led, n->brightness);
+	}
+
+	n->old_status = new_status;
+}
+
+void ledtrig_backlight_blank(bool blank)
+{
+	struct bl_trig_notifier *n;
+	int new_status = blank ? BLANK : UNBLANK;
+
+	guard(mutex)(&ledtrig_backlight_list_mutex);
+
+	list_for_each_entry(n, &ledtrig_backlight_list, entry)
+		ledtrig_backlight_notify_blank(n, new_status);
+}
+EXPORT_SYMBOL(ledtrig_backlight_blank);
+
+static ssize_t bl_trig_invert_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct bl_trig_notifier *n = led_trigger_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", n->invert);
+}
+
+static ssize_t bl_trig_invert_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t num)
+{
+	struct led_classdev *led = led_trigger_get_led(dev);
+	struct bl_trig_notifier *n = led_trigger_get_drvdata(dev);
+	unsigned long invert;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &invert);
+	if (ret < 0)
+		return ret;
+
+	if (invert > 1)
+		return -EINVAL;
+
+	n->invert = invert;
+
+	/* After inverting, we need to update the LED. */
+	if ((n->old_status == BLANK) ^ n->invert)
+		led_set_brightness_nosleep(led, LED_OFF);
+	else
+		led_set_brightness_nosleep(led, n->brightness);
+
+	return num;
+}
+static DEVICE_ATTR(inverted, 0644, bl_trig_invert_show, bl_trig_invert_store);
+
+static struct attribute *bl_trig_attrs[] = {
+	&dev_attr_inverted.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(bl_trig);
+
+static int bl_trig_activate(struct led_classdev *led)
+{
+	struct bl_trig_notifier *n;
+
+	n = kzalloc_obj(struct bl_trig_notifier);
+	if (!n)
+		return -ENOMEM;
+	led_set_trigger_data(led, n);
+
+	n->led = led;
+	n->brightness = led->brightness;
+	n->old_status = UNBLANK;
+
+	guard(mutex)(&ledtrig_backlight_list_mutex);
+	list_add(&n->entry, &ledtrig_backlight_list);
+
+	return 0;
+}
+
+static void bl_trig_deactivate(struct led_classdev *led)
+{
+	struct bl_trig_notifier *n = led_get_trigger_data(led);
+
+	guard(mutex)(&ledtrig_backlight_list_mutex);
+	list_del(&n->entry);
+
+	kfree(n);
+}
+
+static struct led_trigger bl_led_trigger = {
+	.name		= "backlight",
+	.activate	= bl_trig_activate,
+	.deactivate	= bl_trig_deactivate,
+	.groups		= bl_trig_groups,
+};
+module_led_trigger(bl_led_trigger);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("Backlight emulation LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-camera.c b/drivers/leds/trigger/ledtrig-camera.c
new file mode 100644
index 000000000..ab1c41087
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-camera.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Camera Flash and Torch On/Off Trigger
+ *
+ * based on ledtrig-ide-disk.c
+ *
+ * Copyright 2013 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+
+DEFINE_LED_TRIGGER(ledtrig_flash);
+DEFINE_LED_TRIGGER(ledtrig_torch);
+
+void ledtrig_flash_ctrl(bool on)
+{
+	enum led_brightness brt = on ? LED_FULL : LED_OFF;
+
+	led_trigger_event(ledtrig_flash, brt);
+}
+EXPORT_SYMBOL_GPL(ledtrig_flash_ctrl);
+
+void ledtrig_torch_ctrl(bool on)
+{
+	enum led_brightness brt = on ? LED_FULL : LED_OFF;
+
+	led_trigger_event(ledtrig_torch, brt);
+}
+EXPORT_SYMBOL_GPL(ledtrig_torch_ctrl);
+
+static int __init ledtrig_camera_init(void)
+{
+	led_trigger_register_simple("flash", &ledtrig_flash);
+	led_trigger_register_simple("torch", &ledtrig_torch);
+	return 0;
+}
+module_init(ledtrig_camera_init);
+
+static void __exit ledtrig_camera_exit(void)
+{
+	led_trigger_unregister_simple(ledtrig_torch);
+	led_trigger_unregister_simple(ledtrig_flash);
+}
+module_exit(ledtrig_camera_exit);
+
+MODULE_DESCRIPTION("LED Trigger for Camera Flash/Torch Control");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-cpu.c b/drivers/leds/trigger/ledtrig-cpu.c
new file mode 100644
index 000000000..679323c2c
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-cpu.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ledtrig-cpu.c - LED trigger based on CPU activity
+ *
+ * This LED trigger will be registered for first 8 CPUs and named
+ * as cpu0..cpu7. There's additional trigger called cpu that
+ * is on when any CPU is active.
+ *
+ * If you want support for arbitrary number of CPUs, make it one trigger,
+ * with additional sysfs file selecting which CPU to watch.
+ *
+ * It can be bound to any LED just like other triggers using either a
+ * board file or via sysfs interface.
+ *
+ * An API named ledtrig_cpu is exported for any user, who want to add CPU
+ * activity indication in their code.
+ *
+ * Copyright 2011 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright 2011 - 2012 Bryan Wu <bryan.wu@canonical.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/percpu.h>
+#include <linux/syscore_ops.h>
+#include <linux/rwsem.h>
+#include <linux/cpu.h>
+#include "../leds.h"
+
+#define MAX_NAME_LEN	8
+
+struct led_trigger_cpu {
+	bool is_active;
+	char name[MAX_NAME_LEN];
+	struct led_trigger *_trig;
+};
+
+static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig);
+
+static struct led_trigger *trig_cpu_all;
+static atomic_t num_active_cpus = ATOMIC_INIT(0);
+
+/**
+ * ledtrig_cpu - emit a CPU event as a trigger
+ * @ledevt: CPU event to be emitted
+ *
+ * Emit a CPU event on a CPU core, which will trigger a
+ * bound LED to turn on or turn off.
+ */
+void ledtrig_cpu(enum cpu_led_event ledevt)
+{
+	struct led_trigger_cpu *trig = this_cpu_ptr(&cpu_trig);
+	bool is_active = trig->is_active;
+
+	/* Locate the correct CPU LED */
+	switch (ledevt) {
+	case CPU_LED_IDLE_END:
+	case CPU_LED_START:
+		/* Will turn the LED on, max brightness */
+		is_active = true;
+		break;
+
+	case CPU_LED_IDLE_START:
+	case CPU_LED_STOP:
+	case CPU_LED_HALTED:
+		/* Will turn the LED off */
+		is_active = false;
+		break;
+
+	default:
+		/* Will leave the LED as it is */
+		break;
+	}
+
+	if (is_active != trig->is_active) {
+		unsigned int active_cpus;
+		unsigned int total_cpus;
+
+		/* Update trigger state */
+		trig->is_active = is_active;
+		atomic_add(is_active ? 1 : -1, &num_active_cpus);
+		active_cpus = atomic_read(&num_active_cpus);
+		total_cpus = num_present_cpus();
+
+		led_trigger_event(trig->_trig,
+			is_active ? LED_FULL : LED_OFF);
+
+
+		led_trigger_event(trig_cpu_all,
+			DIV_ROUND_UP(LED_FULL * active_cpus, total_cpus));
+
+	}
+}
+EXPORT_SYMBOL(ledtrig_cpu);
+
+static int ledtrig_cpu_syscore_suspend(void *data)
+{
+	ledtrig_cpu(CPU_LED_STOP);
+	return 0;
+}
+
+static void ledtrig_cpu_syscore_resume(void *data)
+{
+	ledtrig_cpu(CPU_LED_START);
+}
+
+static void ledtrig_cpu_syscore_shutdown(void *data)
+{
+	ledtrig_cpu(CPU_LED_HALTED);
+}
+
+static const struct syscore_ops ledtrig_cpu_syscore_ops = {
+	.shutdown	= ledtrig_cpu_syscore_shutdown,
+	.suspend	= ledtrig_cpu_syscore_suspend,
+	.resume		= ledtrig_cpu_syscore_resume,
+};
+
+static struct syscore ledtrig_cpu_syscore = {
+	.ops = &ledtrig_cpu_syscore_ops,
+};
+
+static int ledtrig_online_cpu(unsigned int cpu)
+{
+	ledtrig_cpu(CPU_LED_START);
+	return 0;
+}
+
+static int ledtrig_prepare_down_cpu(unsigned int cpu)
+{
+	ledtrig_cpu(CPU_LED_STOP);
+	return 0;
+}
+
+static int __init ledtrig_cpu_init(void)
+{
+	unsigned int cpu;
+	int ret;
+
+	/* Supports up to 9999 cpu cores */
+	BUILD_BUG_ON(CONFIG_NR_CPUS > 9999);
+
+	/*
+	 * Registering a trigger for all CPUs.
+	 */
+	led_trigger_register_simple("cpu", &trig_cpu_all);
+
+	/*
+	 * Registering CPU led trigger for each CPU core here
+	 * ignores CPU hotplug, but after this CPU hotplug works
+	 * fine with this trigger.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
+
+		if (cpu >= 8)
+			continue;
+
+		snprintf(trig->name, MAX_NAME_LEN, "cpu%u", cpu);
+
+		led_trigger_register_simple(trig->name, &trig->_trig);
+	}
+
+	register_syscore(&ledtrig_cpu_syscore);
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "leds/trigger:starting",
+				ledtrig_online_cpu, ledtrig_prepare_down_cpu);
+	if (ret < 0)
+		pr_err("CPU hotplug notifier for ledtrig-cpu could not be registered: %d\n",
+		       ret);
+
+	pr_info("ledtrig-cpu: registered to indicate activity on CPUs\n");
+
+	return 0;
+}
+device_initcall(ledtrig_cpu_init);
diff --git a/drivers/leds/trigger/ledtrig-default-on.c b/drivers/leds/trigger/ledtrig-default-on.c
new file mode 100644
index 000000000..8678e64a5
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-default-on.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED Kernel Default ON Trigger
+ *
+ * Copyright 2008 Nick Forbes <nick.forbes@incepta.com>
+ *
+ * Based on Richard Purdie's ledtrig-timer.c.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+static int defon_trig_activate(struct led_classdev *led_cdev)
+{
+	led_set_brightness_nosleep(led_cdev, led_cdev->max_brightness);
+	return 0;
+}
+
+static struct led_trigger defon_led_trigger = {
+	.name     = "default-on",
+	.activate = defon_trig_activate,
+};
+module_led_trigger(defon_led_trigger);
+
+MODULE_AUTHOR("Nick Forbes <nick.forbes@incepta.com>");
+MODULE_DESCRIPTION("Default-ON LED trigger");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("ledtrig:default-on");
diff --git a/drivers/leds/trigger/ledtrig-disk.c b/drivers/leds/trigger/ledtrig-disk.c
new file mode 100644
index 000000000..e9b87ee94
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-disk.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED Disk Activity Trigger
+ *
+ * Copyright 2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+
+#define BLINK_DELAY 30
+
+DEFINE_LED_TRIGGER(ledtrig_disk);
+DEFINE_LED_TRIGGER(ledtrig_disk_read);
+DEFINE_LED_TRIGGER(ledtrig_disk_write);
+
+void ledtrig_disk_activity(bool write)
+{
+	led_trigger_blink_oneshot(ledtrig_disk, BLINK_DELAY, BLINK_DELAY, 0);
+	if (write)
+		led_trigger_blink_oneshot(ledtrig_disk_write,
+					  BLINK_DELAY, BLINK_DELAY, 0);
+	else
+		led_trigger_blink_oneshot(ledtrig_disk_read,
+					  BLINK_DELAY, BLINK_DELAY, 0);
+}
+EXPORT_SYMBOL(ledtrig_disk_activity);
+
+static int __init ledtrig_disk_init(void)
+{
+	led_trigger_register_simple("disk-activity", &ledtrig_disk);
+	led_trigger_register_simple("disk-read", &ledtrig_disk_read);
+	led_trigger_register_simple("disk-write", &ledtrig_disk_write);
+
+	return 0;
+}
+device_initcall(ledtrig_disk_init);
diff --git a/drivers/leds/trigger/ledtrig-gpio.c b/drivers/leds/trigger/ledtrig-gpio.c
new file mode 100644
index 000000000..3b3e6869e
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-gpio.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ledtrig-gio.c - LED Trigger Based on GPIO events
+ *
+ * Copyright 2009 Felipe Balbi <me@felipebalbi.com>
+ * Copyright 2023 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include "../leds.h"
+
+struct gpio_trig_data {
+	struct led_classdev *led;
+	unsigned desired_brightness;	/* desired brightness when led is on */
+	struct gpio_desc *gpiod;	/* gpio that triggers the led */
+};
+
+static irqreturn_t gpio_trig_irq(int irq, void *_led)
+{
+	struct led_classdev *led = _led;
+	struct gpio_trig_data *gpio_data = led_get_trigger_data(led);
+	int tmp;
+
+	tmp = gpiod_get_value_cansleep(gpio_data->gpiod);
+	if (tmp) {
+		if (gpio_data->desired_brightness)
+			led_set_brightness_nosleep(gpio_data->led,
+					   gpio_data->desired_brightness);
+		else
+			led_set_brightness_nosleep(gpio_data->led, LED_FULL);
+	} else {
+		led_set_brightness_nosleep(gpio_data->led, LED_OFF);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t desired_brightness_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%u\n", gpio_data->desired_brightness);
+}
+
+static ssize_t desired_brightness_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
+	u8 desired_brightness;
+	int ret;
+
+	ret = kstrtou8(buf, 10, &desired_brightness);
+	if (ret)
+		return ret;
+
+	gpio_data->desired_brightness = desired_brightness;
+
+	return n;
+}
+static DEVICE_ATTR_RW(desired_brightness);
+
+static struct attribute *gpio_trig_attrs[] = {
+	&dev_attr_desired_brightness.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(gpio_trig);
+
+static int gpio_trig_activate(struct led_classdev *led)
+{
+	struct gpio_trig_data *gpio_data;
+	struct device *dev = led->dev;
+	int ret;
+
+	gpio_data = kzalloc_obj(*gpio_data);
+	if (!gpio_data)
+		return -ENOMEM;
+
+	/*
+	 * The generic property "trigger-sources" is followed,
+	 * and we hope that this is a GPIO.
+	 */
+	gpio_data->gpiod = gpiod_get_optional(dev, "trigger-sources",
+					      GPIOD_IN | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+	if (IS_ERR(gpio_data->gpiod)) {
+		ret = PTR_ERR(gpio_data->gpiod);
+		kfree(gpio_data);
+		return ret;
+	}
+	if (!gpio_data->gpiod) {
+		dev_err(dev, "no valid GPIO for the trigger\n");
+		kfree(gpio_data);
+		return -EINVAL;
+	}
+
+	gpiod_set_consumer_name(gpio_data->gpiod, "led-trigger");
+
+	gpio_data->led = led;
+	led_set_trigger_data(led, gpio_data);
+
+	ret = request_threaded_irq(gpiod_to_irq(gpio_data->gpiod), NULL, gpio_trig_irq,
+			IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_RISING
+			| IRQF_TRIGGER_FALLING, "ledtrig-gpio", led);
+	if (ret) {
+		dev_err(dev, "request_irq failed with error %d\n", ret);
+		gpiod_put(gpio_data->gpiod);
+		kfree(gpio_data);
+		return ret;
+	}
+
+	/* Finally update the LED to initial status */
+	gpio_trig_irq(0, led);
+
+	return 0;
+}
+
+static void gpio_trig_deactivate(struct led_classdev *led)
+{
+	struct gpio_trig_data *gpio_data = led_get_trigger_data(led);
+
+	free_irq(gpiod_to_irq(gpio_data->gpiod), led);
+	gpiod_put(gpio_data->gpiod);
+	kfree(gpio_data);
+}
+
+static struct led_trigger gpio_led_trigger = {
+	.name		= "gpio",
+	.activate	= gpio_trig_activate,
+	.deactivate	= gpio_trig_deactivate,
+	.groups		= gpio_trig_groups,
+};
+module_led_trigger(gpio_led_trigger);
+
+MODULE_AUTHOR("Felipe Balbi <me@felipebalbi.com>");
+MODULE_DESCRIPTION("GPIO LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-heartbeat.c b/drivers/leds/trigger/ledtrig-heartbeat.c
new file mode 100644
index 000000000..efe0042b3
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-heartbeat.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED Heartbeat Trigger
+ *
+ * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ *
+ * Based on Richard Purdie's ledtrig-timer.c and some arch's
+ * CONFIG_HEARTBEAT code.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/panic_notifier.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
+#include <linux/sched/loadavg.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
+#include "../leds.h"
+
+static int panic_heartbeats;
+
+struct heartbeat_trig_data {
+	struct led_classdev *led_cdev;
+	unsigned int phase;
+	unsigned int period;
+	struct timer_list timer;
+	unsigned int invert;
+};
+
+static void led_heartbeat_function(struct timer_list *t)
+{
+	struct heartbeat_trig_data *heartbeat_data =
+		timer_container_of(heartbeat_data, t, timer);
+	struct led_classdev *led_cdev;
+	unsigned long brightness = LED_OFF;
+	unsigned long delay = 0;
+
+	led_cdev = heartbeat_data->led_cdev;
+
+	if (unlikely(panic_heartbeats)) {
+		led_set_brightness_nosleep(led_cdev, LED_OFF);
+		return;
+	}
+
+	if (test_and_clear_bit(LED_BLINK_BRIGHTNESS_CHANGE, &led_cdev->work_flags))
+		led_cdev->blink_brightness = led_cdev->new_blink_brightness;
+
+	/* acts like an actual heart beat -- ie thump-thump-pause... */
+	switch (heartbeat_data->phase) {
+	case 0:
+		/*
+		 * The hyperbolic function below modifies the
+		 * heartbeat period length in dependency of the
+		 * current (1min) load. It goes through the points
+		 * f(0)=1260, f(1)=860, f(5)=510, f(inf)->300.
+		 */
+		heartbeat_data->period = 300 +
+			(6720 << FSHIFT) / (5 * avenrun[0] + (7 << FSHIFT));
+		heartbeat_data->period =
+			msecs_to_jiffies(heartbeat_data->period);
+		delay = msecs_to_jiffies(70);
+		heartbeat_data->phase++;
+		if (!heartbeat_data->invert)
+			brightness = led_cdev->blink_brightness;
+		break;
+	case 1:
+		delay = heartbeat_data->period / 4 - msecs_to_jiffies(70);
+		heartbeat_data->phase++;
+		if (heartbeat_data->invert)
+			brightness = led_cdev->blink_brightness;
+		break;
+	case 2:
+		delay = msecs_to_jiffies(70);
+		heartbeat_data->phase++;
+		if (!heartbeat_data->invert)
+			brightness = led_cdev->blink_brightness;
+		break;
+	default:
+		delay = heartbeat_data->period - heartbeat_data->period / 4 -
+			msecs_to_jiffies(70);
+		heartbeat_data->phase = 0;
+		if (heartbeat_data->invert)
+			brightness = led_cdev->blink_brightness;
+		break;
+	}
+
+	led_set_brightness_nosleep(led_cdev, brightness);
+	mod_timer(&heartbeat_data->timer, jiffies + delay);
+}
+
+static ssize_t led_invert_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct heartbeat_trig_data *heartbeat_data =
+		led_trigger_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", heartbeat_data->invert);
+}
+
+static ssize_t led_invert_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct heartbeat_trig_data *heartbeat_data =
+		led_trigger_get_drvdata(dev);
+	unsigned long state;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &state);
+	if (ret)
+		return ret;
+
+	heartbeat_data->invert = !!state;
+
+	return size;
+}
+
+static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
+
+static struct attribute *heartbeat_trig_attrs[] = {
+	&dev_attr_invert.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(heartbeat_trig);
+
+static int heartbeat_trig_activate(struct led_classdev *led_cdev)
+{
+	struct heartbeat_trig_data *heartbeat_data;
+
+	heartbeat_data = kzalloc_obj(*heartbeat_data);
+	if (!heartbeat_data)
+		return -ENOMEM;
+
+	led_set_trigger_data(led_cdev, heartbeat_data);
+	heartbeat_data->led_cdev = led_cdev;
+
+	timer_setup(&heartbeat_data->timer, led_heartbeat_function, 0);
+	heartbeat_data->phase = 0;
+	if (!led_cdev->blink_brightness)
+		led_cdev->blink_brightness = led_cdev->max_brightness;
+	led_heartbeat_function(&heartbeat_data->timer);
+	set_bit(LED_BLINK_SW, &led_cdev->work_flags);
+
+	return 0;
+}
+
+static void heartbeat_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct heartbeat_trig_data *heartbeat_data =
+		led_get_trigger_data(led_cdev);
+
+	timer_shutdown_sync(&heartbeat_data->timer);
+	kfree(heartbeat_data);
+	clear_bit(LED_BLINK_SW, &led_cdev->work_flags);
+}
+
+static struct led_trigger heartbeat_led_trigger = {
+	.name     = "heartbeat",
+	.activate = heartbeat_trig_activate,
+	.deactivate = heartbeat_trig_deactivate,
+	.groups = heartbeat_trig_groups,
+};
+
+static int heartbeat_reboot_notifier(struct notifier_block *nb,
+				     unsigned long code, void *unused)
+{
+	led_trigger_unregister(&heartbeat_led_trigger);
+	return NOTIFY_DONE;
+}
+
+static int heartbeat_panic_notifier(struct notifier_block *nb,
+				     unsigned long code, void *unused)
+{
+	panic_heartbeats = 1;
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block heartbeat_reboot_nb = {
+	.notifier_call = heartbeat_reboot_notifier,
+};
+
+static struct notifier_block heartbeat_panic_nb = {
+	.notifier_call = heartbeat_panic_notifier,
+};
+
+static int __init heartbeat_trig_init(void)
+{
+	int rc = led_trigger_register(&heartbeat_led_trigger);
+
+	if (!rc) {
+		atomic_notifier_chain_register(&panic_notifier_list,
+					       &heartbeat_panic_nb);
+		register_reboot_notifier(&heartbeat_reboot_nb);
+	}
+	return rc;
+}
+
+static void __exit heartbeat_trig_exit(void)
+{
+	unregister_reboot_notifier(&heartbeat_reboot_nb);
+	atomic_notifier_chain_unregister(&panic_notifier_list,
+					 &heartbeat_panic_nb);
+	led_trigger_unregister(&heartbeat_led_trigger);
+}
+
+module_init(heartbeat_trig_init);
+module_exit(heartbeat_trig_exit);
+
+MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_DESCRIPTION("Heartbeat LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-input-events.c b/drivers/leds/trigger/ledtrig-input-events.c
new file mode 100644
index 000000000..d057b2a23
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-input-events.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Input Events LED trigger
+ *
+ * Copyright (C) 2024 Hans de Goede <hansg@kernel.org>
+ */
+
+#include <linux/input.h>
+#include <linux/jiffies.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include "../leds.h"
+
+static unsigned long led_off_delay_ms = 5000;
+module_param(led_off_delay_ms, ulong, 0644);
+MODULE_PARM_DESC(led_off_delay_ms,
+	"Specify delay in ms for turning LEDs off after last input event");
+
+static struct input_events_data {
+	struct delayed_work work;
+	spinlock_t lock;
+	/* To avoid repeatedly setting the brightness while there are events */
+	bool led_on;
+	unsigned long led_off_time;
+} input_events_data;
+
+static struct led_trigger *input_events_led_trigger;
+
+static void led_input_events_work(struct work_struct *work)
+{
+	struct input_events_data *data =
+		container_of(work, struct input_events_data, work.work);
+
+	spin_lock_irq(&data->lock);
+
+	/*
+	 * This time_after_eq() check avoids a race where this work starts
+	 * running before a new event pushed led_off_time back.
+	 */
+	if (time_after_eq(jiffies, data->led_off_time)) {
+		led_trigger_event(input_events_led_trigger, LED_OFF);
+		data->led_on = false;
+	}
+
+	spin_unlock_irq(&data->lock);
+}
+
+static void input_events_event(struct input_handle *handle, unsigned int type,
+			       unsigned int code, int val)
+{
+	struct input_events_data *data = &input_events_data;
+	unsigned long led_off_delay = msecs_to_jiffies(led_off_delay_ms);
+	unsigned long flags;
+
+	spin_lock_irqsave(&data->lock, flags);
+
+	if (!data->led_on) {
+		led_trigger_event(input_events_led_trigger, LED_FULL);
+		data->led_on = true;
+	}
+	data->led_off_time = jiffies + led_off_delay;
+
+	spin_unlock_irqrestore(&data->lock, flags);
+
+	mod_delayed_work(system_percpu_wq, &data->work, led_off_delay);
+}
+
+static int input_events_connect(struct input_handler *handler, struct input_dev *dev,
+				const struct input_device_id *id)
+{
+	struct input_handle *handle;
+	int ret;
+
+	handle = kzalloc_obj(*handle);
+	if (!handle)
+		return -ENOMEM;
+
+	handle->dev = dev;
+	handle->handler = handler;
+	handle->name = KBUILD_MODNAME;
+
+	ret = input_register_handle(handle);
+	if (ret)
+		goto err_free_handle;
+
+	ret = input_open_device(handle);
+	if (ret)
+		goto err_unregister_handle;
+
+	return 0;
+
+err_unregister_handle:
+	input_unregister_handle(handle);
+err_free_handle:
+	kfree(handle);
+	return ret;
+}
+
+static void input_events_disconnect(struct input_handle *handle)
+{
+	input_close_device(handle);
+	input_unregister_handle(handle);
+	kfree(handle);
+}
+
+static const struct input_device_id input_events_ids[] = {
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT,
+		.evbit = { BIT_MASK(EV_REL) },
+	},
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT,
+		.evbit = { BIT_MASK(EV_ABS) },
+	},
+	{ }
+};
+
+static struct input_handler input_events_handler = {
+	.name = KBUILD_MODNAME,
+	.event = input_events_event,
+	.connect = input_events_connect,
+	.disconnect = input_events_disconnect,
+	.id_table = input_events_ids,
+};
+
+static int __init input_events_init(void)
+{
+	int ret;
+
+	INIT_DELAYED_WORK(&input_events_data.work, led_input_events_work);
+	spin_lock_init(&input_events_data.lock);
+
+	led_trigger_register_simple("input-events", &input_events_led_trigger);
+
+	ret = input_register_handler(&input_events_handler);
+	if (ret) {
+		led_trigger_unregister_simple(input_events_led_trigger);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit input_events_exit(void)
+{
+	input_unregister_handler(&input_events_handler);
+	cancel_delayed_work_sync(&input_events_data.work);
+	led_trigger_unregister_simple(input_events_led_trigger);
+}
+
+module_init(input_events_init);
+module_exit(input_events_exit);
+
+MODULE_AUTHOR("Hans de Goede <hansg@kernel.org>");
+MODULE_DESCRIPTION("Input Events LED trigger");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("ledtrig:input-events");
diff --git a/drivers/leds/trigger/ledtrig-mtd.c b/drivers/leds/trigger/ledtrig-mtd.c
new file mode 100644
index 000000000..bbe6876a2
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-mtd.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED MTD trigger
+ *
+ * Copyright 2016 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
+ *
+ * Based on LED IDE-Disk Activity Trigger
+ *
+ * Copyright 2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+
+#define BLINK_DELAY 30
+
+DEFINE_LED_TRIGGER(ledtrig_mtd);
+DEFINE_LED_TRIGGER(ledtrig_nand);
+
+void ledtrig_mtd_activity(void)
+{
+	led_trigger_blink_oneshot(ledtrig_mtd, BLINK_DELAY, BLINK_DELAY, 0);
+	led_trigger_blink_oneshot(ledtrig_nand, BLINK_DELAY, BLINK_DELAY, 0);
+}
+EXPORT_SYMBOL(ledtrig_mtd_activity);
+
+static int __init ledtrig_mtd_init(void)
+{
+	led_trigger_register_simple("mtd", &ledtrig_mtd);
+	led_trigger_register_simple("nand-disk", &ledtrig_nand);
+
+	return 0;
+}
+device_initcall(ledtrig_mtd_init);
diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
new file mode 100644
index 000000000..64c078e99
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -0,0 +1,770 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright 2017 Ben Whitten <ben.whitten@gmail.com>
+// Copyright 2007 Oliver Jowett <oliver@opencloud.com>
+//
+// LED Kernel Netdev Trigger
+//
+// Toggles the LED to reflect the link and traffic state of a named net device
+//
+// Derived from ledtrig-timer.c which is:
+//  Copyright 2005-2006 Openedhand Ltd.
+//  Author: Richard Purdie <rpurdie@openedhand.com>
+
+#include <linux/atomic.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/linkmode.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/mutex.h>
+#include <linux/phy.h>
+#include <linux/rtnetlink.h>
+#include <linux/timer.h>
+#include <net/netdev_lock.h>
+#include "../leds.h"
+
+#define NETDEV_LED_DEFAULT_INTERVAL	50
+
+/*
+ * Configurable sysfs attributes:
+ *
+ * device_name - network device name to monitor
+ * interval - duration of LED blink, in milliseconds
+ * link -  LED's normal state reflects whether the link is up
+ *         (has carrier) or not
+ * tx -  LED blinks on transmitted data
+ * rx -  LED blinks on receive data
+ * tx_err -  LED blinks on transmit error
+ * rx_err -  LED blinks on receive error
+ *
+ * Note: If the user selects a mode that is not supported by hw, default
+ * behavior is to fall back to software control of the LED. However not every
+ * hw supports software control. LED callbacks brightness_set() and
+ * brightness_set_blocking() are NULL in this case. hw_control_is_supported()
+ * should use available means supported by hw to inform the user that selected
+ * mode isn't supported by hw. This could be switching off the LED or any
+ * hw blink mode. If software control fallback isn't possible, we return
+ * -EOPNOTSUPP to the user, but still store the selected mode. This is needed
+ * in case an intermediate unsupported mode is necessary to switch from one
+ * supported mode to another.
+ */
+
+struct led_netdev_data {
+	struct mutex lock;
+
+	struct delayed_work work;
+	struct notifier_block notifier;
+
+	struct led_classdev *led_cdev;
+	struct net_device *net_dev;
+
+	char device_name[IFNAMSIZ];
+	atomic_t interval;
+	unsigned int last_activity;
+
+	unsigned long mode;
+	int link_speed;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported_link_modes);
+	u8 duplex;
+
+	bool carrier_link_up;
+	bool hw_control;
+};
+
+static const struct attribute_group netdev_trig_link_speed_attrs_group;
+
+static void set_baseline_state(struct led_netdev_data *trigger_data)
+{
+	int current_brightness;
+	struct led_classdev *led_cdev = trigger_data->led_cdev;
+
+	/* Already validated, hw control is possible with the requested mode */
+	if (trigger_data->hw_control) {
+		led_cdev->hw_control_set(led_cdev, trigger_data->mode);
+
+		return;
+	}
+
+	current_brightness = led_cdev->brightness;
+	if (current_brightness)
+		led_cdev->blink_brightness = current_brightness;
+	if (!led_cdev->blink_brightness)
+		led_cdev->blink_brightness = led_cdev->max_brightness;
+
+	if (!trigger_data->carrier_link_up) {
+		led_set_brightness(led_cdev, LED_OFF);
+	} else {
+		bool blink_on = false;
+
+		if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode))
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_10)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_100)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_1000)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_2500)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_5000)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) &&
+		    trigger_data->link_speed == SPEED_10000)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) &&
+		    trigger_data->duplex == DUPLEX_HALF)
+			blink_on = true;
+
+		if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode) &&
+		    trigger_data->duplex == DUPLEX_FULL)
+			blink_on = true;
+
+		if (blink_on)
+			led_set_brightness(led_cdev,
+					   led_cdev->blink_brightness);
+		else
+			led_set_brightness(led_cdev, LED_OFF);
+
+		/* If we are looking for RX/TX start periodically
+		 * checking stats
+		 */
+		if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ||
+		    test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ||
+		    test_bit(TRIGGER_NETDEV_TX_ERR, &trigger_data->mode) ||
+		    test_bit(TRIGGER_NETDEV_RX_ERR, &trigger_data->mode))
+			schedule_delayed_work(&trigger_data->work, 0);
+	}
+}
+
+static bool supports_hw_control(struct led_classdev *led_cdev)
+{
+	if (!led_cdev->hw_control_get || !led_cdev->hw_control_set ||
+	    !led_cdev->hw_control_is_supported)
+		return false;
+
+	return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name);
+}
+
+/*
+ * Validate the configured netdev is the same as the one associated with
+ * the LED driver in hw control.
+ */
+static bool validate_net_dev(struct led_classdev *led_cdev,
+			     struct net_device *net_dev)
+{
+	struct device *dev = led_cdev->hw_control_get_device(led_cdev);
+	struct net_device *ndev;
+
+	if (!dev)
+		return false;
+
+	ndev = to_net_dev(dev);
+
+	return ndev == net_dev;
+}
+
+static bool can_hw_control(struct led_netdev_data *trigger_data)
+{
+	unsigned long default_interval = msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL);
+	unsigned int interval = atomic_read(&trigger_data->interval);
+	struct led_classdev *led_cdev = trigger_data->led_cdev;
+	int ret;
+
+	if (!supports_hw_control(led_cdev))
+		return false;
+
+	/*
+	 * Interval must be set to the default
+	 * value. Any different value is rejected if in hw
+	 * control.
+	 */
+	if (interval != default_interval)
+		return false;
+
+	/*
+	 * net_dev must be set with hw control, otherwise no
+	 * blinking can be happening and there is nothing to
+	 * offloaded. Additionally, for hw control to be
+	 * valid, the configured netdev must be the same as
+	 * netdev associated to the LED.
+	 */
+	if (!validate_net_dev(led_cdev, trigger_data->net_dev))
+		return false;
+
+	/* Check if the requested mode is supported */
+	ret = led_cdev->hw_control_is_supported(led_cdev, trigger_data->mode);
+	/* Fall back to software blinking if not supported */
+	if (ret == -EOPNOTSUPP)
+		return false;
+	if (ret) {
+		dev_warn(led_cdev->dev,
+			 "Current mode check failed with error %d\n", ret);
+		return false;
+	}
+
+	return true;
+}
+
+static void get_device_state(struct led_netdev_data *trigger_data)
+{
+	struct ethtool_link_ksettings cmd;
+
+	trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
+
+	if (netif_get_link_ksettings(trigger_data->net_dev, &cmd))
+		return;
+
+	if (trigger_data->carrier_link_up) {
+		trigger_data->link_speed = cmd.base.speed;
+		trigger_data->duplex = cmd.base.duplex;
+	}
+
+	/*
+	 * Have a local copy of the link speed supported to avoid rtnl lock every time
+	 * modes are refreshed on any change event
+	 */
+	linkmode_copy(trigger_data->supported_link_modes, cmd.link_modes.supported);
+}
+
+static ssize_t device_name_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+	ssize_t len;
+
+	mutex_lock(&trigger_data->lock);
+	len = sprintf(buf, "%s\n", trigger_data->device_name);
+	mutex_unlock(&trigger_data->lock);
+
+	return len;
+}
+
+static int set_device_name(struct led_netdev_data *trigger_data,
+			   const char *name, size_t size)
+{
+	struct net_device *new_dev = NULL;
+	char device_name[IFNAMSIZ];
+
+	if (size >= IFNAMSIZ)
+		return -EINVAL;
+
+	cancel_delayed_work_sync(&trigger_data->work);
+
+	memcpy(device_name, name, size);
+	device_name[size] = 0;
+	if (size > 0 && device_name[size - 1] == '\n')
+		device_name[size - 1] = 0;
+
+	/*
+	 * Lock order: rtnl_lock -> netdev instance lock -> trigger_data lock.
+	 */
+	rtnl_lock();
+	if (device_name[0]) {
+		new_dev = dev_get_by_name(&init_net, device_name);
+		if (new_dev)
+			netdev_lock_ops(new_dev);
+	}
+	mutex_lock(&trigger_data->lock);
+
+	dev_put(trigger_data->net_dev);
+	trigger_data->net_dev = new_dev;
+	strscpy(trigger_data->device_name, device_name);
+
+	trigger_data->carrier_link_up = false;
+	trigger_data->link_speed = SPEED_UNKNOWN;
+	trigger_data->duplex = DUPLEX_UNKNOWN;
+	if (trigger_data->net_dev)
+		get_device_state(trigger_data);
+
+	trigger_data->last_activity = 0;
+
+	/* Skip if we're called from netdev_trig_activate() and hw_control is true */
+	if (!trigger_data->hw_control || led_get_trigger_data(trigger_data->led_cdev))
+		set_baseline_state(trigger_data);
+
+	mutex_unlock(&trigger_data->lock);
+	if (new_dev)
+		netdev_unlock_ops(new_dev);
+	rtnl_unlock();
+
+	return 0;
+}
+
+static ssize_t device_name_store(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t size)
+{
+	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+	int ret;
+
+	ret = set_device_name(trigger_data, buf, size);
+
+	if (ret < 0)
+		return ret;
+
+	/* Refresh link_speed visibility */
+	sysfs_update_group(&dev->kobj, &netdev_trig_link_speed_attrs_group);
+
+	return size;
+}
+
+static DEVICE_ATTR_RW(device_name);
+
+static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
+				    enum led_trigger_netdev_modes attr)
+{
+	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+	int bit;
+
+	switch (attr) {
+	case TRIGGER_NETDEV_LINK:
+	case TRIGGER_NETDEV_LINK_10:
+	case TRIGGER_NETDEV_LINK_100:
+	case TRIGGER_NETDEV_LINK_1000:
+	case TRIGGER_NETDEV_LINK_2500:
+	case TRIGGER_NETDEV_LINK_5000:
+	case TRIGGER_NETDEV_LINK_10000:
+	case TRIGGER_NETDEV_HALF_DUPLEX:
+	case TRIGGER_NETDEV_FULL_DUPLEX:
+	case TRIGGER_NETDEV_TX:
+	case TRIGGER_NETDEV_RX:
+	case TRIGGER_NETDEV_TX_ERR:
+	case TRIGGER_NETDEV_RX_ERR:
+		bit = attr;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return sprintf(buf, "%u\n", test_bit(bit, &trigger_data->mode));
+}
+
+static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
+				     size_t size, enum led_trigger_netdev_modes attr)
+{
+	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+	struct led_classdev *led_cdev = trigger_data->led_cdev;
+	unsigned long state, mode = trigger_data->mode;
+	int ret;
+	int bit;
+
+	ret = kstrtoul(buf, 0, &state);
+	if (ret)
+		return ret;
+
+	switch (attr) {
+	case TRIGGER_NETDEV_LINK:
+	case TRIGGER_NETDEV_LINK_10:
+	case TRIGGER_NETDEV_LINK_100:
+	case TRIGGER_NETDEV_LINK_1000:
+	case TRIGGER_NETDEV_LINK_2500:
+	case TRIGGER_NETDEV_LINK_5000:
+	case TRIGGER_NETDEV_LINK_10000:
+	case TRIGGER_NETDEV_HALF_DUPLEX:
+	case TRIGGER_NETDEV_FULL_DUPLEX:
+	case TRIGGER_NETDEV_TX:
+	case TRIGGER_NETDEV_RX:
+	case TRIGGER_NETDEV_TX_ERR:
+	case TRIGGER_NETDEV_RX_ERR:
+		bit = attr;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (state)
+		set_bit(bit, &mode);
+	else
+		clear_bit(bit, &mode);
+
+	if (test_bit(TRIGGER_NETDEV_LINK, &mode) &&
+	    (test_bit(TRIGGER_NETDEV_LINK_10, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_100, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_1000, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_2500, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_5000, &mode) ||
+	     test_bit(TRIGGER_NETDEV_LINK_10000, &mode)))
+		return -EINVAL;
+
+	cancel_delayed_work_sync(&trigger_data->work);
+
+	trigger_data->mode = mode;
+	trigger_data->hw_control = can_hw_control(trigger_data);
+
+	if (!led_cdev->brightness_set && !led_cdev->brightness_set_blocking &&
+	    !trigger_data->hw_control)
+		return -EOPNOTSUPP;
+
+	set_baseline_state(trigger_data);
+
+	return size;
+}
+
+#define DEFINE_NETDEV_TRIGGER(trigger_name, trigger) \
+	static ssize_t trigger_name##_show(struct device *dev, \
+		struct device_attribute *attr, char *buf) \
+	{ \
+		return netdev_led_attr_show(dev, buf, trigger); \
+	} \
+	static ssize_t trigger_name##_store(struct device *dev, \
+		struct device_attribute *attr, const char *buf, size_t size) \
+	{ \
+		return netdev_led_attr_store(dev, buf, size, trigger); \
+	} \
+	static DEVICE_ATTR_RW(trigger_name)
+
+DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
+DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
+DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
+DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
+DEFINE_NETDEV_TRIGGER(link_2500, TRIGGER_NETDEV_LINK_2500);
+DEFINE_NETDEV_TRIGGER(link_5000, TRIGGER_NETDEV_LINK_5000);
+DEFINE_NETDEV_TRIGGER(link_10000, TRIGGER_NETDEV_LINK_10000);
+DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
+DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
+DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
+DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
+DEFINE_NETDEV_TRIGGER(tx_err, TRIGGER_NETDEV_TX_ERR);
+DEFINE_NETDEV_TRIGGER(rx_err, TRIGGER_NETDEV_RX_ERR);
+
+static ssize_t interval_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n",
+		       jiffies_to_msecs(atomic_read(&trigger_data->interval)));
+}
+
+static ssize_t interval_store(struct device *dev,
+			      struct device_attribute *attr, const char *buf,
+			      size_t size)
+{
+	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+	unsigned long value;
+	int ret;
+
+	if (trigger_data->hw_control)
+		return -EINVAL;
+
+	ret = kstrtoul(buf, 0, &value);
+	if (ret)
+		return ret;
+
+	/* impose some basic bounds on the timer interval */
+	if (value >= 5 && value <= 10000) {
+		cancel_delayed_work_sync(&trigger_data->work);
+
+		atomic_set(&trigger_data->interval, msecs_to_jiffies(value));
+		set_baseline_state(trigger_data);	/* resets timer */
+	}
+
+	return size;
+}
+
+static DEVICE_ATTR_RW(interval);
+
+static ssize_t offloaded_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", trigger_data->hw_control);
+}
+
+static DEVICE_ATTR_RO(offloaded);
+
+#define CHECK_LINK_MODE_ATTR(link_speed) \
+	do { \
+		if (attr == &dev_attr_link_##link_speed.attr && \
+		    link_ksettings.base.speed == SPEED_##link_speed) \
+			return attr->mode; \
+	} while (0)
+
+static umode_t netdev_trig_link_speed_visible(struct kobject *kobj,
+					      struct attribute *attr, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct led_netdev_data *trigger_data;
+	unsigned long *supported_link_modes;
+	u32 mode;
+
+	trigger_data = led_trigger_get_drvdata(dev);
+	supported_link_modes = trigger_data->supported_link_modes;
+
+	/*
+	 * Search in the supported link mode mask a matching supported mode.
+	 * Stop at the first matching entry as we care only to check if a particular
+	 * speed is supported and not the kind.
+	 */
+	for_each_set_bit(mode, supported_link_modes, __ETHTOOL_LINK_MODE_MASK_NBITS) {
+		struct ethtool_link_ksettings link_ksettings;
+
+		ethtool_params_from_link_mode(&link_ksettings, mode);
+
+		CHECK_LINK_MODE_ATTR(10);
+		CHECK_LINK_MODE_ATTR(100);
+		CHECK_LINK_MODE_ATTR(1000);
+		CHECK_LINK_MODE_ATTR(2500);
+		CHECK_LINK_MODE_ATTR(5000);
+		CHECK_LINK_MODE_ATTR(10000);
+	}
+
+	return 0;
+}
+
+static struct attribute *netdev_trig_link_speed_attrs[] = {
+	&dev_attr_link_10.attr,
+	&dev_attr_link_100.attr,
+	&dev_attr_link_1000.attr,
+	&dev_attr_link_2500.attr,
+	&dev_attr_link_5000.attr,
+	&dev_attr_link_10000.attr,
+	NULL
+};
+
+static const struct attribute_group netdev_trig_link_speed_attrs_group = {
+	.attrs = netdev_trig_link_speed_attrs,
+	.is_visible = netdev_trig_link_speed_visible,
+};
+
+static struct attribute *netdev_trig_attrs[] = {
+	&dev_attr_device_name.attr,
+	&dev_attr_link.attr,
+	&dev_attr_full_duplex.attr,
+	&dev_attr_half_duplex.attr,
+	&dev_attr_rx.attr,
+	&dev_attr_tx.attr,
+	&dev_attr_rx_err.attr,
+	&dev_attr_tx_err.attr,
+	&dev_attr_interval.attr,
+	&dev_attr_offloaded.attr,
+	NULL
+};
+
+static const struct attribute_group netdev_trig_attrs_group = {
+	.attrs = netdev_trig_attrs,
+};
+
+static const struct attribute_group *netdev_trig_groups[] = {
+	&netdev_trig_attrs_group,
+	&netdev_trig_link_speed_attrs_group,
+	NULL,
+};
+
+static int netdev_trig_notify(struct notifier_block *nb,
+			      unsigned long evt, void *dv)
+{
+	struct net_device *dev =
+		netdev_notifier_info_to_dev((struct netdev_notifier_info *)dv);
+	struct led_netdev_data *trigger_data =
+		container_of(nb, struct led_netdev_data, notifier);
+	struct led_classdev *led_cdev = trigger_data->led_cdev;
+
+	if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE
+	    && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER
+	    && evt != NETDEV_CHANGENAME)
+		return NOTIFY_DONE;
+
+	if (!(dev == trigger_data->net_dev ||
+	      (evt == NETDEV_CHANGENAME && !strcmp(dev->name, trigger_data->device_name)) ||
+	      (evt == NETDEV_REGISTER && !strcmp(dev->name, trigger_data->device_name))))
+		return NOTIFY_DONE;
+
+	cancel_delayed_work_sync(&trigger_data->work);
+
+	mutex_lock(&trigger_data->lock);
+
+	trigger_data->carrier_link_up = false;
+	trigger_data->link_speed = SPEED_UNKNOWN;
+	trigger_data->duplex = DUPLEX_UNKNOWN;
+	switch (evt) {
+	case NETDEV_CHANGENAME:
+	case NETDEV_REGISTER:
+		dev_put(trigger_data->net_dev);
+		dev_hold(dev);
+		trigger_data->net_dev = dev;
+		if (evt == NETDEV_CHANGENAME)
+			get_device_state(trigger_data);
+		break;
+	case NETDEV_UNREGISTER:
+		dev_put(trigger_data->net_dev);
+		trigger_data->net_dev = NULL;
+		break;
+	case NETDEV_UP:
+		trigger_data->hw_control = can_hw_control(trigger_data);
+		fallthrough;
+	case NETDEV_CHANGE:
+		get_device_state(trigger_data);
+		/* Refresh link_speed visibility */
+		if (evt == NETDEV_CHANGE)
+			sysfs_update_group(&led_cdev->dev->kobj,
+					   &netdev_trig_link_speed_attrs_group);
+		break;
+	}
+
+	set_baseline_state(trigger_data);
+
+	mutex_unlock(&trigger_data->lock);
+
+	return NOTIFY_DONE;
+}
+
+/* here's the real work! */
+static void netdev_trig_work(struct work_struct *work)
+{
+	struct led_netdev_data *trigger_data =
+		container_of(work, struct led_netdev_data, work.work);
+	struct rtnl_link_stats64 *dev_stats;
+	unsigned int new_activity;
+	struct rtnl_link_stats64 temp;
+	unsigned long interval;
+	int invert;
+
+	/* If we dont have a device, insure we are off */
+	if (!trigger_data->net_dev) {
+		led_set_brightness(trigger_data->led_cdev, LED_OFF);
+		return;
+	}
+
+	/* If we are not looking for RX/TX then return  */
+	if (!test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) &&
+	    !test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) &&
+	    !test_bit(TRIGGER_NETDEV_TX_ERR, &trigger_data->mode) &&
+	    !test_bit(TRIGGER_NETDEV_RX_ERR, &trigger_data->mode))
+		return;
+
+	dev_stats = dev_get_stats(trigger_data->net_dev, &temp);
+	new_activity =
+	    (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ?
+		dev_stats->tx_packets : 0) +
+	    (test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ?
+		dev_stats->rx_packets : 0) +
+	    (test_bit(TRIGGER_NETDEV_TX_ERR, &trigger_data->mode) ?
+		dev_stats->tx_errors : 0) +
+	    (test_bit(TRIGGER_NETDEV_RX_ERR, &trigger_data->mode) ?
+		dev_stats->rx_errors : 0);
+
+	if (trigger_data->last_activity != new_activity) {
+		led_stop_software_blink(trigger_data->led_cdev);
+
+		invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) ||
+			 test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode);
+		interval = jiffies_to_msecs(
+				atomic_read(&trigger_data->interval));
+		/* base state is ON (link present) */
+		led_blink_set_oneshot(trigger_data->led_cdev,
+				      &interval,
+				      &interval,
+				      invert);
+		trigger_data->last_activity = new_activity;
+	}
+
+	schedule_delayed_work(&trigger_data->work,
+			(atomic_read(&trigger_data->interval)*2));
+}
+
+static int netdev_trig_activate(struct led_classdev *led_cdev)
+{
+	struct led_netdev_data *trigger_data;
+	unsigned long mode = 0;
+	struct device *dev;
+	int rc;
+
+	trigger_data = kzalloc_obj(struct led_netdev_data);
+	if (!trigger_data)
+		return -ENOMEM;
+
+	mutex_init(&trigger_data->lock);
+
+	trigger_data->notifier.notifier_call = netdev_trig_notify;
+	trigger_data->notifier.priority = 10;
+
+	INIT_DELAYED_WORK(&trigger_data->work, netdev_trig_work);
+
+	trigger_data->led_cdev = led_cdev;
+	trigger_data->net_dev = NULL;
+	trigger_data->device_name[0] = 0;
+
+	trigger_data->mode = 0;
+	atomic_set(&trigger_data->interval, msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL));
+	trigger_data->last_activity = 0;
+
+	/* Check if hw control is active by default on the LED.
+	 * Init already enabled mode in hw control.
+	 */
+	if (supports_hw_control(led_cdev)) {
+		dev = led_cdev->hw_control_get_device(led_cdev);
+		if (dev) {
+			const char *name = dev_name(dev);
+
+			trigger_data->hw_control = true;
+			set_device_name(trigger_data, name, strlen(name));
+
+			rc = led_cdev->hw_control_get(led_cdev, &mode);
+			if (!rc)
+				trigger_data->mode = mode;
+		}
+	}
+
+	led_set_trigger_data(led_cdev, trigger_data);
+
+	rc = register_netdevice_notifier(&trigger_data->notifier);
+	if (rc)
+		kfree(trigger_data);
+
+	return rc;
+}
+
+static void netdev_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct led_netdev_data *trigger_data = led_get_trigger_data(led_cdev);
+
+	unregister_netdevice_notifier(&trigger_data->notifier);
+
+	cancel_delayed_work_sync(&trigger_data->work);
+
+	dev_put(trigger_data->net_dev);
+
+	kfree(trigger_data);
+}
+
+static struct led_trigger netdev_led_trigger = {
+	.name = "netdev",
+	.activate = netdev_trig_activate,
+	.deactivate = netdev_trig_deactivate,
+	.groups = netdev_trig_groups,
+};
+
+module_led_trigger(netdev_led_trigger);
+
+MODULE_AUTHOR("Ben Whitten <ben.whitten@gmail.com>");
+MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
+MODULE_DESCRIPTION("Netdev LED trigger");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("ledtrig:netdev");
diff --git a/drivers/leds/trigger/ledtrig-oneshot.c b/drivers/leds/trigger/ledtrig-oneshot.c
new file mode 100644
index 000000000..9068e3bb0
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-oneshot.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * One-shot LED Trigger
+ *
+ * Copyright 2012, Fabio Baltieri <fabio.baltieri@gmail.com>
+ *
+ * Based on ledtrig-timer.c by Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+#define DEFAULT_DELAY 100
+
+struct oneshot_trig_data {
+	unsigned int invert;
+};
+
+static ssize_t led_shot(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+	struct oneshot_trig_data *oneshot_data = led_trigger_get_drvdata(dev);
+
+	led_blink_set_oneshot(led_cdev,
+			&led_cdev->blink_delay_on, &led_cdev->blink_delay_off,
+			oneshot_data->invert);
+
+	/* content is ignored */
+	return size;
+}
+static ssize_t led_invert_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct oneshot_trig_data *oneshot_data = led_trigger_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", oneshot_data->invert);
+}
+
+static ssize_t led_invert_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+	struct oneshot_trig_data *oneshot_data = led_trigger_get_drvdata(dev);
+	unsigned long state;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &state);
+	if (ret)
+		return ret;
+
+	oneshot_data->invert = !!state;
+
+	if (oneshot_data->invert)
+		led_set_brightness_nosleep(led_cdev, LED_FULL);
+	else
+		led_set_brightness_nosleep(led_cdev, LED_OFF);
+
+	return size;
+}
+
+static ssize_t led_delay_on_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+
+	return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
+}
+
+static ssize_t led_delay_on_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+	unsigned long state;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &state);
+	if (ret)
+		return ret;
+
+	led_cdev->blink_delay_on = state;
+
+	return size;
+}
+
+static ssize_t led_delay_off_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+
+	return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
+}
+
+static ssize_t led_delay_off_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+	unsigned long state;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &state);
+	if (ret)
+		return ret;
+
+	led_cdev->blink_delay_off = state;
+
+	return size;
+}
+
+static DEVICE_ATTR(delay_on, 0644, led_delay_on_show, led_delay_on_store);
+static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store);
+static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
+static DEVICE_ATTR(shot, 0200, NULL, led_shot);
+
+static struct attribute *oneshot_trig_attrs[] = {
+	&dev_attr_delay_on.attr,
+	&dev_attr_delay_off.attr,
+	&dev_attr_invert.attr,
+	&dev_attr_shot.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(oneshot_trig);
+
+static void pattern_init(struct led_classdev *led_cdev)
+{
+	u32 *pattern;
+	unsigned int size = 0;
+
+	pattern = led_get_default_pattern(led_cdev, &size);
+	if (!pattern)
+		goto out_default;
+
+	if (size != 2) {
+		dev_warn(led_cdev->dev,
+			 "Expected 2 but got %u values for delays pattern\n",
+			 size);
+		goto out_default;
+	}
+
+	led_cdev->blink_delay_on = pattern[0];
+	led_cdev->blink_delay_off = pattern[1];
+	kfree(pattern);
+
+	return;
+
+out_default:
+	kfree(pattern);
+	led_cdev->blink_delay_on = DEFAULT_DELAY;
+	led_cdev->blink_delay_off = DEFAULT_DELAY;
+}
+
+static int oneshot_trig_activate(struct led_classdev *led_cdev)
+{
+	struct oneshot_trig_data *oneshot_data;
+
+	oneshot_data = kzalloc_obj(*oneshot_data);
+	if (!oneshot_data)
+		return -ENOMEM;
+
+	led_set_trigger_data(led_cdev, oneshot_data);
+
+	if (led_cdev->flags & LED_INIT_DEFAULT_TRIGGER) {
+		pattern_init(led_cdev);
+		/*
+		 * Mark as initialized even on pattern_init() error because
+		 * any consecutive call to it would produce the same error.
+		 */
+		led_cdev->flags &= ~LED_INIT_DEFAULT_TRIGGER;
+	}
+
+	return 0;
+}
+
+static void oneshot_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct oneshot_trig_data *oneshot_data = led_get_trigger_data(led_cdev);
+
+	kfree(oneshot_data);
+
+	/* Stop blinking */
+	led_set_brightness(led_cdev, LED_OFF);
+}
+
+static struct led_trigger oneshot_led_trigger = {
+	.name     = "oneshot",
+	.activate = oneshot_trig_activate,
+	.deactivate = oneshot_trig_deactivate,
+	.groups = oneshot_trig_groups,
+};
+module_led_trigger(oneshot_led_trigger);
+
+MODULE_AUTHOR("Fabio Baltieri <fabio.baltieri@gmail.com>");
+MODULE_DESCRIPTION("One-shot LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-panic.c b/drivers/leds/trigger/ledtrig-panic.c
new file mode 100644
index 000000000..1d49c1078
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-panic.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Kernel Panic LED Trigger
+ *
+ * Copyright 2016 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/notifier.h>
+#include <linux/panic_notifier.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+static struct led_trigger *trigger;
+
+/*
+ * This is called in a special context by the atomic panic
+ * notifier. This means the trigger can be changed without
+ * worrying about locking.
+ */
+static void led_trigger_set_panic(struct led_classdev *led_cdev)
+{
+	if (led_cdev->trigger)
+		list_del(&led_cdev->trig_list);
+	list_add_tail(&led_cdev->trig_list, &trigger->led_cdevs);
+
+	/* Avoid the delayed blink path */
+	led_cdev->blink_delay_on = 0;
+	led_cdev->blink_delay_off = 0;
+
+	led_cdev->trigger = trigger;
+}
+
+static int led_trigger_panic_notifier(struct notifier_block *nb,
+				      unsigned long code, void *unused)
+{
+	struct led_classdev *led_cdev;
+
+	list_for_each_entry(led_cdev, &leds_list, node)
+		if (led_cdev->flags & LED_PANIC_INDICATOR)
+			led_trigger_set_panic(led_cdev);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block led_trigger_panic_nb = {
+	.notifier_call = led_trigger_panic_notifier,
+};
+
+static long led_panic_blink(int state)
+{
+	led_trigger_event(trigger, state ? LED_FULL : LED_OFF);
+	return 0;
+}
+
+static int __init ledtrig_panic_init(void)
+{
+	led_trigger_register_simple("panic", &trigger);
+	if (!trigger)
+		return -ENOMEM;
+
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &led_trigger_panic_nb);
+
+	panic_blink = led_panic_blink;
+	return 0;
+}
+device_initcall(ledtrig_panic_init);
diff --git a/drivers/leds/trigger/ledtrig-pattern.c b/drivers/leds/trigger/ledtrig-pattern.c
new file mode 100644
index 000000000..8f9cbe54e
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-pattern.c
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * LED pattern trigger
+ *
+ * Idea discussed with Pavel Machek. Raphael Teysseyre implemented
+ * the first version, Baolin Wang simplified and improved the approach.
+ */
+
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/hrtimer.h>
+
+#define MAX_PATTERNS		1024
+/*
+ * When doing gradual dimming, the led brightness will be updated
+ * every 50 milliseconds.
+ */
+#define UPDATE_INTERVAL		50
+
+enum pattern_type {
+	PATTERN_TYPE_SW, /* Use standard timer for software pattern */
+	PATTERN_TYPE_HR, /* Use hrtimer for software pattern */
+	PATTERN_TYPE_HW, /* Hardware pattern */
+};
+
+struct pattern_trig_data {
+	struct led_classdev *led_cdev;
+	struct led_pattern patterns[MAX_PATTERNS];
+	struct led_pattern *curr;
+	struct led_pattern *next;
+	struct mutex lock;
+	u32 npatterns;
+	int repeat;
+	int last_repeat;
+	int delta_t;
+	bool is_indefinite;
+	enum pattern_type type;
+	struct timer_list timer;
+	struct hrtimer hrtimer;
+};
+
+static void pattern_trig_update_patterns(struct pattern_trig_data *data)
+{
+	data->curr = data->next;
+	if (!data->is_indefinite && data->curr == data->patterns)
+		data->repeat--;
+
+	if (data->next == data->patterns + data->npatterns - 1)
+		data->next = data->patterns;
+	else
+		data->next++;
+
+	data->delta_t = 0;
+}
+
+static int pattern_trig_compute_brightness(struct pattern_trig_data *data)
+{
+	int step_brightness;
+
+	/*
+	 * If current tuple's duration is less than the dimming interval,
+	 * we should treat it as a step change of brightness instead of
+	 * doing gradual dimming.
+	 */
+	if (data->delta_t == 0 || data->curr->delta_t < UPDATE_INTERVAL)
+		return data->curr->brightness;
+
+	step_brightness = abs(data->next->brightness - data->curr->brightness);
+	step_brightness = data->delta_t * step_brightness / data->curr->delta_t;
+
+	if (data->next->brightness > data->curr->brightness)
+		return data->curr->brightness + step_brightness;
+	else
+		return data->curr->brightness - step_brightness;
+}
+
+static void pattern_trig_timer_start(struct pattern_trig_data *data)
+{
+	if (data->type == PATTERN_TYPE_HR) {
+		hrtimer_start(&data->hrtimer, ns_to_ktime(0), HRTIMER_MODE_REL);
+	} else {
+		data->timer.expires = jiffies;
+		add_timer(&data->timer);
+	}
+}
+
+static void pattern_trig_timer_cancel(struct pattern_trig_data *data)
+{
+	if (data->type == PATTERN_TYPE_HR)
+		hrtimer_cancel(&data->hrtimer);
+	else
+		timer_delete_sync(&data->timer);
+}
+
+static void pattern_trig_timer_restart(struct pattern_trig_data *data,
+				       unsigned long interval)
+{
+	if (data->type == PATTERN_TYPE_HR)
+		hrtimer_forward_now(&data->hrtimer, ms_to_ktime(interval));
+	else
+		mod_timer(&data->timer, jiffies + msecs_to_jiffies(interval));
+}
+
+static void pattern_trig_timer_common_function(struct pattern_trig_data *data)
+{
+	for (;;) {
+		if (!data->is_indefinite && !data->repeat)
+			break;
+
+		if (data->curr->brightness == data->next->brightness) {
+			/* Step change of brightness */
+			led_set_brightness(data->led_cdev,
+					   data->curr->brightness);
+			pattern_trig_timer_restart(data, data->curr->delta_t);
+			if (!data->next->delta_t) {
+				/* Skip the tuple with zero duration */
+				pattern_trig_update_patterns(data);
+			}
+			/* Select next tuple */
+			pattern_trig_update_patterns(data);
+		} else {
+			/* Gradual dimming */
+
+			/*
+			 * If the accumulation time is larger than current
+			 * tuple's duration, we should go next one and re-check
+			 * if we repeated done.
+			 */
+			if (data->delta_t > data->curr->delta_t) {
+				pattern_trig_update_patterns(data);
+				continue;
+			}
+
+			led_set_brightness(data->led_cdev,
+					   pattern_trig_compute_brightness(data));
+			pattern_trig_timer_restart(data, UPDATE_INTERVAL);
+
+			/* Accumulate the gradual dimming time */
+			data->delta_t += UPDATE_INTERVAL;
+		}
+
+		break;
+	}
+}
+
+static void pattern_trig_timer_function(struct timer_list *t)
+{
+	struct pattern_trig_data *data = timer_container_of(data, t, timer);
+
+	return pattern_trig_timer_common_function(data);
+}
+
+static enum hrtimer_restart pattern_trig_hrtimer_function(struct hrtimer *t)
+{
+	struct pattern_trig_data *data =
+		container_of(t, struct pattern_trig_data, hrtimer);
+
+	pattern_trig_timer_common_function(data);
+	if (!data->is_indefinite && !data->repeat)
+		return HRTIMER_NORESTART;
+
+	return HRTIMER_RESTART;
+}
+
+static int pattern_trig_start_pattern(struct led_classdev *led_cdev)
+{
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+
+	if (!data->npatterns)
+		return 0;
+
+	if (data->type == PATTERN_TYPE_HW) {
+		return led_cdev->pattern_set(led_cdev, data->patterns,
+					     data->npatterns, data->repeat);
+	}
+
+	/* At least 2 tuples for software pattern. */
+	if (data->npatterns < 2)
+		return -EINVAL;
+
+	data->delta_t = 0;
+	data->curr = data->patterns;
+	data->next = data->patterns + 1;
+	pattern_trig_timer_start(data);
+
+	return 0;
+}
+
+static ssize_t repeat_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+	int repeat;
+
+	mutex_lock(&data->lock);
+
+	repeat = data->last_repeat;
+
+	mutex_unlock(&data->lock);
+
+	return sysfs_emit(buf, "%d\n", repeat);
+}
+
+static ssize_t repeat_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+	int err, res;
+
+	err = kstrtos32(buf, 10, &res);
+	if (err)
+		return err;
+
+	/* Number 0 and negative numbers except -1 are invalid. */
+	if (res < -1 || res == 0)
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	pattern_trig_timer_cancel(data);
+
+	if (data->type == PATTERN_TYPE_HW)
+		led_cdev->pattern_clear(led_cdev);
+
+	data->last_repeat = data->repeat = res;
+	/* -1 means repeat indefinitely */
+	if (data->repeat == -1)
+		data->is_indefinite = true;
+	else
+		data->is_indefinite = false;
+
+	err = pattern_trig_start_pattern(led_cdev);
+
+	mutex_unlock(&data->lock);
+	return err < 0 ? err : count;
+}
+
+static DEVICE_ATTR_RW(repeat);
+
+static ssize_t pattern_trig_show_patterns(struct pattern_trig_data *data,
+					  char *buf, enum pattern_type type)
+{
+	ssize_t count = 0;
+	int i;
+
+	mutex_lock(&data->lock);
+
+	if (!data->npatterns || data->type != type)
+		goto out;
+
+	for (i = 0; i < data->npatterns; i++) {
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "%d %u ",
+				   data->patterns[i].brightness,
+				   data->patterns[i].delta_t);
+	}
+
+	buf[count - 1] = '\n';
+
+out:
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static int pattern_trig_store_patterns_string(struct pattern_trig_data *data,
+					      const char *buf, size_t count)
+{
+	int ccount, cr, offset = 0;
+
+	while (offset < count - 1 && data->npatterns < MAX_PATTERNS) {
+		cr = 0;
+		ccount = sscanf(buf + offset, "%u %u %n",
+				&data->patterns[data->npatterns].brightness,
+				&data->patterns[data->npatterns].delta_t, &cr);
+
+		if (ccount != 2 ||
+		    data->patterns[data->npatterns].brightness > data->led_cdev->max_brightness) {
+			data->npatterns = 0;
+			return -EINVAL;
+		}
+
+		offset += cr;
+		data->npatterns++;
+	}
+
+	return 0;
+}
+
+static int pattern_trig_store_patterns_int(struct pattern_trig_data *data,
+					   const u32 *buf, size_t count)
+{
+	unsigned int i;
+
+	for (i = 0; i < count; i += 2) {
+		data->patterns[data->npatterns].brightness = buf[i];
+		data->patterns[data->npatterns].delta_t = buf[i + 1];
+		data->npatterns++;
+	}
+
+	return 0;
+}
+
+static ssize_t pattern_trig_store_patterns(struct led_classdev *led_cdev,
+					   const char *buf, const u32 *buf_int,
+					   size_t count, enum pattern_type type)
+{
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+	int err = 0;
+
+	mutex_lock(&data->lock);
+
+	pattern_trig_timer_cancel(data);
+
+	if (data->type == PATTERN_TYPE_HW)
+		led_cdev->pattern_clear(led_cdev);
+
+	data->type = type;
+	data->npatterns = 0;
+
+	if (buf)
+		err = pattern_trig_store_patterns_string(data, buf, count);
+	else
+		err = pattern_trig_store_patterns_int(data, buf_int, count);
+	if (err)
+		goto out;
+
+	err = pattern_trig_start_pattern(led_cdev);
+	if (err)
+		data->npatterns = 0;
+
+out:
+	mutex_unlock(&data->lock);
+	return err < 0 ? err : count;
+}
+
+static ssize_t pattern_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+
+	return pattern_trig_show_patterns(data, buf, PATTERN_TYPE_SW);
+}
+
+static ssize_t pattern_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return pattern_trig_store_patterns(led_cdev, buf, NULL, count,
+					   PATTERN_TYPE_SW);
+}
+
+static DEVICE_ATTR_RW(pattern);
+
+static ssize_t hw_pattern_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+
+	return pattern_trig_show_patterns(data, buf, PATTERN_TYPE_HW);
+}
+
+static ssize_t hw_pattern_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return pattern_trig_store_patterns(led_cdev, buf, NULL, count,
+					   PATTERN_TYPE_HW);
+}
+
+static DEVICE_ATTR_RW(hw_pattern);
+
+static ssize_t hr_pattern_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+
+	return pattern_trig_show_patterns(data, buf, PATTERN_TYPE_HR);
+}
+
+static ssize_t hr_pattern_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return pattern_trig_store_patterns(led_cdev, buf, NULL, count,
+					   PATTERN_TYPE_HR);
+}
+
+static DEVICE_ATTR_RW(hr_pattern);
+
+static umode_t pattern_trig_attrs_mode(struct kobject *kobj,
+				       struct attribute *attr, int index)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	if (attr == &dev_attr_repeat.attr || attr == &dev_attr_pattern.attr)
+		return attr->mode;
+	else if (attr == &dev_attr_hr_pattern.attr)
+		return attr->mode;
+	else if (attr == &dev_attr_hw_pattern.attr && led_cdev->pattern_set)
+		return attr->mode;
+
+	return 0;
+}
+
+static struct attribute *pattern_trig_attrs[] = {
+	&dev_attr_pattern.attr,
+	&dev_attr_hw_pattern.attr,
+	&dev_attr_hr_pattern.attr,
+	&dev_attr_repeat.attr,
+	NULL
+};
+
+static const struct attribute_group pattern_trig_group = {
+	.attrs = pattern_trig_attrs,
+	.is_visible = pattern_trig_attrs_mode,
+};
+
+static const struct attribute_group *pattern_trig_groups[] = {
+	&pattern_trig_group,
+	NULL,
+};
+
+static void pattern_init(struct led_classdev *led_cdev)
+{
+	unsigned int size = 0;
+	u32 *pattern;
+	int err;
+
+	pattern = led_get_default_pattern(led_cdev, &size);
+	if (!pattern)
+		return;
+
+	if (size % 2) {
+		dev_warn(led_cdev->dev, "Expected pattern of tuples\n");
+		goto out;
+	}
+
+	err = pattern_trig_store_patterns(led_cdev, NULL, pattern, size,
+					  PATTERN_TYPE_SW);
+	if (err < 0)
+		dev_warn(led_cdev->dev,
+			 "Pattern initialization failed with error %d\n", err);
+
+out:
+	kfree(pattern);
+}
+
+static int pattern_trig_activate(struct led_classdev *led_cdev)
+{
+	struct pattern_trig_data *data;
+
+	data = kzalloc_obj(*data);
+	if (!data)
+		return -ENOMEM;
+
+	if (!!led_cdev->pattern_set ^ !!led_cdev->pattern_clear) {
+		dev_warn(led_cdev->dev,
+			 "Hardware pattern ops validation failed\n");
+		led_cdev->pattern_set = NULL;
+		led_cdev->pattern_clear = NULL;
+	}
+
+	data->type = PATTERN_TYPE_SW;
+	data->is_indefinite = true;
+	data->last_repeat = -1;
+	mutex_init(&data->lock);
+	data->led_cdev = led_cdev;
+	led_set_trigger_data(led_cdev, data);
+	timer_setup(&data->timer, pattern_trig_timer_function, 0);
+	hrtimer_setup(&data->hrtimer, pattern_trig_hrtimer_function, CLOCK_MONOTONIC,
+		      HRTIMER_MODE_REL);
+	led_cdev->activated = true;
+
+	if (led_cdev->flags & LED_INIT_DEFAULT_TRIGGER) {
+		pattern_init(led_cdev);
+		/*
+		 * Mark as initialized even on pattern_init() error because
+		 * any consecutive call to it would produce the same error.
+		 */
+		led_cdev->flags &= ~LED_INIT_DEFAULT_TRIGGER;
+	}
+
+	return 0;
+}
+
+static void pattern_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct pattern_trig_data *data = led_cdev->trigger_data;
+
+	if (!led_cdev->activated)
+		return;
+
+	if (led_cdev->pattern_clear)
+		led_cdev->pattern_clear(led_cdev);
+
+	timer_shutdown_sync(&data->timer);
+	hrtimer_cancel(&data->hrtimer);
+
+	led_set_brightness(led_cdev, LED_OFF);
+	kfree(data);
+	led_cdev->activated = false;
+}
+
+static struct led_trigger pattern_led_trigger = {
+	.name = "pattern",
+	.activate = pattern_trig_activate,
+	.deactivate = pattern_trig_deactivate,
+	.groups = pattern_trig_groups,
+};
+
+static int __init pattern_trig_init(void)
+{
+	return led_trigger_register(&pattern_led_trigger);
+}
+
+static void __exit pattern_trig_exit(void)
+{
+	led_trigger_unregister(&pattern_led_trigger);
+}
+
+module_init(pattern_trig_init);
+module_exit(pattern_trig_exit);
+
+MODULE_AUTHOR("Raphael Teysseyre <rteysseyre@gmail.com>");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@linaro.org>");
+MODULE_DESCRIPTION("LED Pattern trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-timer.c b/drivers/leds/trigger/ledtrig-timer.c
new file mode 100644
index 000000000..1d213c999
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-timer.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LED Kernel Timer Trigger
+ *
+ * Copyright 2005-2006 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+static ssize_t led_delay_on_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+
+	return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
+}
+
+static ssize_t led_delay_on_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+	unsigned long state;
+	ssize_t ret;
+
+	ret = kstrtoul(buf, 10, &state);
+	if (ret)
+		return ret;
+
+	led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off);
+	led_cdev->blink_delay_on = state;
+
+	return size;
+}
+
+static ssize_t led_delay_off_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+
+	return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
+}
+
+static ssize_t led_delay_off_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+	unsigned long state;
+	ssize_t ret;
+
+	ret = kstrtoul(buf, 10, &state);
+	if (ret)
+		return ret;
+
+	led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state);
+	led_cdev->blink_delay_off = state;
+
+	return size;
+}
+
+static DEVICE_ATTR(delay_on, 0644, led_delay_on_show, led_delay_on_store);
+static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store);
+
+static struct attribute *timer_trig_attrs[] = {
+	&dev_attr_delay_on.attr,
+	&dev_attr_delay_off.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(timer_trig);
+
+static void pattern_init(struct led_classdev *led_cdev)
+{
+	u32 *pattern;
+	unsigned int size = 0;
+
+	pattern = led_get_default_pattern(led_cdev, &size);
+	if (!pattern)
+		return;
+
+	if (size != 2) {
+		dev_warn(led_cdev->dev,
+			 "Expected 2 but got %u values for delays pattern\n",
+			 size);
+		goto out;
+	}
+
+	led_cdev->blink_delay_on = pattern[0];
+	led_cdev->blink_delay_off = pattern[1];
+	/* led_blink_set() called by caller */
+
+out:
+	kfree(pattern);
+}
+
+static int timer_trig_activate(struct led_classdev *led_cdev)
+{
+	if (led_cdev->flags & LED_INIT_DEFAULT_TRIGGER) {
+		pattern_init(led_cdev);
+		/*
+		 * Mark as initialized even on pattern_init() error because
+		 * any consecutive call to it would produce the same error.
+		 */
+		led_cdev->flags &= ~LED_INIT_DEFAULT_TRIGGER;
+	}
+
+	led_blink_set(led_cdev, &led_cdev->blink_delay_on,
+		      &led_cdev->blink_delay_off);
+
+	return 0;
+}
+
+static void timer_trig_deactivate(struct led_classdev *led_cdev)
+{
+	/* Stop blinking */
+	led_set_brightness(led_cdev, LED_OFF);
+}
+
+static struct led_trigger timer_led_trigger = {
+	.name     = "timer",
+	.activate = timer_trig_activate,
+	.deactivate = timer_trig_deactivate,
+	.groups = timer_trig_groups,
+};
+module_led_trigger(timer_led_trigger);
+
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("Timer LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-transient.c b/drivers/leds/trigger/ledtrig-transient.c
new file mode 100644
index 000000000..8d928bb2a
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-transient.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// LED Kernel Transient Trigger
+//
+// Transient trigger allows one shot timer activation. Please refer to
+// Documentation/leds/ledtrig-transient.rst for details
+// Copyright (C) 2012 Shuah Khan <shuahkhan@gmail.com>
+//
+// Based on Richard Purdie's ledtrig-timer.c and Atsushi Nemoto's
+// ledtrig-heartbeat.c
+// Design and use-case input from Jonas Bonn <jonas@southpole.se> and
+// Neil Brown <neilb@suse.de>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+struct transient_trig_data {
+	int activate;
+	int state;
+	int restore_state;
+	unsigned long duration;
+	struct timer_list timer;
+	struct led_classdev *led_cdev;
+};
+
+static void transient_timer_function(struct timer_list *t)
+{
+	struct transient_trig_data *transient_data =
+		timer_container_of(transient_data, t, timer);
+	struct led_classdev *led_cdev = transient_data->led_cdev;
+
+	transient_data->activate = 0;
+	led_set_brightness_nosleep(led_cdev, transient_data->restore_state);
+}
+
+static ssize_t transient_activate_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct transient_trig_data *transient_data =
+		led_trigger_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", transient_data->activate);
+}
+
+static ssize_t transient_activate_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = led_trigger_get_led(dev);
+	struct transient_trig_data *transient_data =
+		led_trigger_get_drvdata(dev);
+	unsigned long state;
+	ssize_t ret;
+
+	ret = kstrtoul(buf, 10, &state);
+	if (ret)
+		return ret;
+
+	if (state != 1 && state != 0)
+		return -EINVAL;
+
+	/* cancel the running timer */
+	if (state == 0 && transient_data->activate == 1) {
+		timer_delete(&transient_data->timer);
+		transient_data->activate = state;
+		led_set_brightness_nosleep(led_cdev,
+					transient_data->restore_state);
+		return size;
+	}
+
+	/* start timer if there is no active timer */
+	if (state == 1 && transient_data->activate == 0 &&
+	    transient_data->duration != 0) {
+		transient_data->activate = state;
+		led_set_brightness_nosleep(led_cdev, transient_data->state);
+		transient_data->restore_state =
+		    (transient_data->state == LED_FULL) ? LED_OFF : LED_FULL;
+		mod_timer(&transient_data->timer,
+			  jiffies + msecs_to_jiffies(transient_data->duration));
+	}
+
+	/* state == 0 && transient_data->activate == 0
+		timer is not active - just return */
+	/* state == 1 && transient_data->activate == 1
+		timer is already active - just return */
+
+	return size;
+}
+
+static ssize_t transient_duration_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct transient_trig_data *transient_data = led_trigger_get_drvdata(dev);
+
+	return sprintf(buf, "%lu\n", transient_data->duration);
+}
+
+static ssize_t transient_duration_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct transient_trig_data *transient_data =
+		led_trigger_get_drvdata(dev);
+	unsigned long state;
+	ssize_t ret;
+
+	ret = kstrtoul(buf, 10, &state);
+	if (ret)
+		return ret;
+
+	transient_data->duration = state;
+	return size;
+}
+
+static ssize_t transient_state_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct transient_trig_data *transient_data =
+		led_trigger_get_drvdata(dev);
+	int state;
+
+	state = (transient_data->state == LED_FULL) ? 1 : 0;
+	return sprintf(buf, "%d\n", state);
+}
+
+static ssize_t transient_state_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct transient_trig_data *transient_data =
+		led_trigger_get_drvdata(dev);
+	unsigned long state;
+	ssize_t ret;
+
+	ret = kstrtoul(buf, 10, &state);
+	if (ret)
+		return ret;
+
+	if (state != 1 && state != 0)
+		return -EINVAL;
+
+	transient_data->state = (state == 1) ? LED_FULL : LED_OFF;
+	return size;
+}
+
+static DEVICE_ATTR(activate, 0644, transient_activate_show,
+		   transient_activate_store);
+static DEVICE_ATTR(duration, 0644, transient_duration_show,
+		   transient_duration_store);
+static DEVICE_ATTR(state, 0644, transient_state_show, transient_state_store);
+
+static struct attribute *transient_trig_attrs[] = {
+	&dev_attr_activate.attr,
+	&dev_attr_duration.attr,
+	&dev_attr_state.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(transient_trig);
+
+static int transient_trig_activate(struct led_classdev *led_cdev)
+{
+	struct transient_trig_data *tdata;
+
+	tdata = kzalloc_obj(struct transient_trig_data);
+	if (!tdata)
+		return -ENOMEM;
+
+	led_set_trigger_data(led_cdev, tdata);
+	tdata->led_cdev = led_cdev;
+
+	timer_setup(&tdata->timer, transient_timer_function, 0);
+
+	return 0;
+}
+
+static void transient_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct transient_trig_data *transient_data = led_get_trigger_data(led_cdev);
+
+	timer_shutdown_sync(&transient_data->timer);
+	led_set_brightness_nosleep(led_cdev, transient_data->restore_state);
+	kfree(transient_data);
+}
+
+static struct led_trigger transient_trigger = {
+	.name     = "transient",
+	.activate = transient_trig_activate,
+	.deactivate = transient_trig_deactivate,
+	.groups = transient_trig_groups,
+};
+module_led_trigger(transient_trigger);
+
+MODULE_AUTHOR("Shuah Khan <shuahkhan@gmail.com>");
+MODULE_DESCRIPTION("Transient LED trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/trigger/ledtrig-tty.c b/drivers/leds/trigger/ledtrig-tty.c
new file mode 100644
index 000000000..372557114
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-tty.c
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <uapi/linux/serial.h>
+
+#define LEDTRIG_TTY_INTERVAL	50
+
+struct ledtrig_tty_data {
+	struct led_classdev *led_cdev;
+	struct delayed_work dwork;
+	struct completion sysfs;
+	const char *ttyname;
+	struct tty_struct *tty;
+	int rx, tx;
+	bool mode_rx;
+	bool mode_tx;
+	bool mode_cts;
+	bool mode_dsr;
+	bool mode_dcd;
+	bool mode_rng;
+};
+
+/* Indicates which state the LED should now display */
+enum led_trigger_tty_state {
+	TTY_LED_BLINK,
+	TTY_LED_ENABLE,
+	TTY_LED_DISABLE,
+};
+
+enum led_trigger_tty_modes {
+	TRIGGER_TTY_RX = 0,
+	TRIGGER_TTY_TX,
+	TRIGGER_TTY_CTS,
+	TRIGGER_TTY_DSR,
+	TRIGGER_TTY_DCD,
+	TRIGGER_TTY_RNG,
+};
+
+static int ledtrig_tty_wait_for_completion(struct device *dev)
+{
+	struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
+	int ret;
+
+	ret = wait_for_completion_timeout(&trigger_data->sysfs,
+					  msecs_to_jiffies(LEDTRIG_TTY_INTERVAL * 20));
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	return ret;
+}
+
+static ssize_t ttyname_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
+	ssize_t len = 0;
+	int completion;
+
+	reinit_completion(&trigger_data->sysfs);
+	completion = ledtrig_tty_wait_for_completion(dev);
+	if (completion < 0)
+		return completion;
+
+	if (trigger_data->ttyname)
+		len = sprintf(buf, "%s\n", trigger_data->ttyname);
+
+	return len;
+}
+
+static ssize_t ttyname_store(struct device *dev,
+			     struct device_attribute *attr, const char *buf,
+			     size_t size)
+{
+	struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
+	char *ttyname;
+	ssize_t ret = size;
+	int completion;
+
+	if (size > 0 && buf[size - 1] == '\n')
+		size -= 1;
+
+	if (size) {
+		ttyname = kmemdup_nul(buf, size, GFP_KERNEL);
+		if (!ttyname)
+			return -ENOMEM;
+	} else {
+		ttyname = NULL;
+	}
+
+	reinit_completion(&trigger_data->sysfs);
+	completion = ledtrig_tty_wait_for_completion(dev);
+	if (completion < 0)
+		return completion;
+
+	kfree(trigger_data->ttyname);
+	tty_kref_put(trigger_data->tty);
+	trigger_data->tty = NULL;
+
+	trigger_data->ttyname = ttyname;
+
+	return ret;
+}
+static DEVICE_ATTR_RW(ttyname);
+
+static ssize_t ledtrig_tty_attr_show(struct device *dev, char *buf,
+				     enum led_trigger_tty_modes attr)
+{
+	struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
+	bool state;
+
+	switch (attr) {
+	case TRIGGER_TTY_RX:
+		state = trigger_data->mode_rx;
+		break;
+	case TRIGGER_TTY_TX:
+		state = trigger_data->mode_tx;
+		break;
+	case TRIGGER_TTY_CTS:
+		state = trigger_data->mode_cts;
+		break;
+	case TRIGGER_TTY_DSR:
+		state = trigger_data->mode_dsr;
+		break;
+	case TRIGGER_TTY_DCD:
+		state = trigger_data->mode_dcd;
+		break;
+	case TRIGGER_TTY_RNG:
+		state = trigger_data->mode_rng;
+		break;
+	}
+
+	return sysfs_emit(buf, "%u\n", state);
+}
+
+static ssize_t ledtrig_tty_attr_store(struct device *dev, const char *buf,
+				      size_t size, enum led_trigger_tty_modes attr)
+{
+	struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
+	bool state;
+	int ret;
+
+	ret = kstrtobool(buf, &state);
+	if (ret)
+		return ret;
+
+	switch (attr) {
+	case TRIGGER_TTY_RX:
+		trigger_data->mode_rx = state;
+		break;
+	case TRIGGER_TTY_TX:
+		trigger_data->mode_tx = state;
+		break;
+	case TRIGGER_TTY_CTS:
+		trigger_data->mode_cts = state;
+		break;
+	case TRIGGER_TTY_DSR:
+		trigger_data->mode_dsr = state;
+		break;
+	case TRIGGER_TTY_DCD:
+		trigger_data->mode_dcd = state;
+		break;
+	case TRIGGER_TTY_RNG:
+		trigger_data->mode_rng = state;
+		break;
+	}
+
+	return size;
+}
+
+#define DEFINE_TTY_TRIGGER(trigger_name, trigger) \
+	static ssize_t trigger_name##_show(struct device *dev, \
+		struct device_attribute *attr, char *buf) \
+	{ \
+		return ledtrig_tty_attr_show(dev, buf, trigger); \
+	} \
+	static ssize_t trigger_name##_store(struct device *dev, \
+		struct device_attribute *attr, const char *buf, size_t size) \
+	{ \
+		return ledtrig_tty_attr_store(dev, buf, size, trigger); \
+	} \
+	static DEVICE_ATTR_RW(trigger_name)
+
+DEFINE_TTY_TRIGGER(rx, TRIGGER_TTY_RX);
+DEFINE_TTY_TRIGGER(tx, TRIGGER_TTY_TX);
+DEFINE_TTY_TRIGGER(cts, TRIGGER_TTY_CTS);
+DEFINE_TTY_TRIGGER(dsr, TRIGGER_TTY_DSR);
+DEFINE_TTY_TRIGGER(dcd, TRIGGER_TTY_DCD);
+DEFINE_TTY_TRIGGER(rng, TRIGGER_TTY_RNG);
+
+static void ledtrig_tty_work(struct work_struct *work)
+{
+	struct ledtrig_tty_data *trigger_data =
+		container_of(work, struct ledtrig_tty_data, dwork.work);
+	enum led_trigger_tty_state state = TTY_LED_DISABLE;
+	unsigned long interval = LEDTRIG_TTY_INTERVAL;
+	bool invert = false;
+	int status;
+	int ret;
+
+	if (!trigger_data->ttyname)
+		goto out;
+
+	/* try to get the tty corresponding to $ttyname */
+	if (!trigger_data->tty) {
+		dev_t devno;
+		struct tty_struct *tty;
+		int ret;
+
+		ret = tty_dev_name_to_number(trigger_data->ttyname, &devno);
+		if (ret < 0)
+			/*
+			 * A device with this name might appear later, so keep
+			 * retrying.
+			 */
+			goto out;
+
+		tty = tty_kopen_shared(devno);
+		if (IS_ERR_OR_NULL(tty))
+			/* What to do? retry or abort */
+			goto out;
+
+		trigger_data->tty = tty;
+	}
+
+	status = tty_get_tiocm(trigger_data->tty);
+	if (status > 0) {
+		if (trigger_data->mode_cts) {
+			if (status & TIOCM_CTS)
+				state = TTY_LED_ENABLE;
+		}
+
+		if (trigger_data->mode_dsr) {
+			if (status & TIOCM_DSR)
+				state = TTY_LED_ENABLE;
+		}
+
+		if (trigger_data->mode_dcd) {
+			if (status & TIOCM_CAR)
+				state = TTY_LED_ENABLE;
+		}
+
+		if (trigger_data->mode_rng) {
+			if (status & TIOCM_RNG)
+				state = TTY_LED_ENABLE;
+		}
+	}
+
+	/*
+	 * The evaluation of rx/tx must be done after the evaluation
+	 * of TIOCM_*, because rx/tx has priority.
+	 */
+	if (trigger_data->mode_rx || trigger_data->mode_tx) {
+		struct serial_icounter_struct icount;
+
+		ret = tty_get_icount(trigger_data->tty, &icount);
+		if (ret)
+			goto out;
+
+		if (trigger_data->mode_tx && (icount.tx != trigger_data->tx)) {
+			trigger_data->tx = icount.tx;
+			invert = state == TTY_LED_ENABLE;
+			state = TTY_LED_BLINK;
+		}
+
+		if (trigger_data->mode_rx && (icount.rx != trigger_data->rx)) {
+			trigger_data->rx = icount.rx;
+			invert = state == TTY_LED_ENABLE;
+			state = TTY_LED_BLINK;
+		}
+	}
+
+out:
+	switch (state) {
+	case TTY_LED_BLINK:
+		led_blink_set_oneshot(trigger_data->led_cdev, &interval,
+				&interval, invert);
+		break;
+	case TTY_LED_ENABLE:
+		led_set_brightness(trigger_data->led_cdev,
+				trigger_data->led_cdev->blink_brightness);
+		break;
+	case TTY_LED_DISABLE:
+		fallthrough;
+	default:
+		led_set_brightness(trigger_data->led_cdev, LED_OFF);
+		break;
+	}
+
+	complete_all(&trigger_data->sysfs);
+	schedule_delayed_work(&trigger_data->dwork,
+			      msecs_to_jiffies(LEDTRIG_TTY_INTERVAL * 2));
+}
+
+static struct attribute *ledtrig_tty_attrs[] = {
+	&dev_attr_ttyname.attr,
+	&dev_attr_rx.attr,
+	&dev_attr_tx.attr,
+	&dev_attr_cts.attr,
+	&dev_attr_dsr.attr,
+	&dev_attr_dcd.attr,
+	&dev_attr_rng.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(ledtrig_tty);
+
+static int ledtrig_tty_activate(struct led_classdev *led_cdev)
+{
+	struct ledtrig_tty_data *trigger_data;
+
+	trigger_data = kzalloc_obj(*trigger_data);
+	if (!trigger_data)
+		return -ENOMEM;
+
+	/* Enable default rx/tx mode */
+	trigger_data->mode_rx = true;
+	trigger_data->mode_tx = true;
+
+	led_set_trigger_data(led_cdev, trigger_data);
+
+	INIT_DELAYED_WORK(&trigger_data->dwork, ledtrig_tty_work);
+	trigger_data->led_cdev = led_cdev;
+	init_completion(&trigger_data->sysfs);
+
+	schedule_delayed_work(&trigger_data->dwork, 0);
+
+	return 0;
+}
+
+static void ledtrig_tty_deactivate(struct led_classdev *led_cdev)
+{
+	struct ledtrig_tty_data *trigger_data = led_get_trigger_data(led_cdev);
+
+	cancel_delayed_work_sync(&trigger_data->dwork);
+
+	kfree(trigger_data->ttyname);
+	tty_kref_put(trigger_data->tty);
+	trigger_data->tty = NULL;
+
+	kfree(trigger_data);
+}
+
+static struct led_trigger ledtrig_tty = {
+	.name = "tty",
+	.activate = ledtrig_tty_activate,
+	.deactivate = ledtrig_tty_deactivate,
+	.groups = ledtrig_tty_groups,
+};
+module_led_trigger(ledtrig_tty);
+
+MODULE_AUTHOR("Uwe Kleine-König <u.kleine-koenig@pengutronix.de>");
+MODULE_DESCRIPTION("UART LED trigger");
+MODULE_LICENSE("GPL v2");