drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 137 insertions, 0 deletions

diff --git a/drivers/leds/leds-syscon.c b/drivers/leds/leds-syscon.c
new file mode 100644
index 000000000..d633ad519
--- /dev/null
+++ b/drivers/leds/leds-syscon.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Generic Syscon LEDs Driver
+ *
+ * Copyright (c) 2014, Linaro Limited
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/leds.h>
+
+/**
+ * struct syscon_led - state container for syscon based LEDs
+ * @cdev: LED class device for this LED
+ * @map: regmap to access the syscon device backing this LED
+ * @offset: the offset into the syscon regmap for the LED register
+ * @mask: the bit in the register corresponding to the LED
+ * @state: current state of the LED
+ */
+struct syscon_led {
+	struct led_classdev cdev;
+	struct regmap *map;
+	u32 offset;
+	u32 mask;
+	bool state;
+};
+
+static void syscon_led_set(struct led_classdev *led_cdev,
+	enum led_brightness value)
+{
+	struct syscon_led *sled =
+		container_of(led_cdev, struct syscon_led, cdev);
+	u32 val;
+	int ret;
+
+	if (value == LED_OFF) {
+		val = 0;
+		sled->state = false;
+	} else {
+		val = sled->mask;
+		sled->state = true;
+	}
+
+	ret = regmap_update_bits(sled->map, sled->offset, sled->mask, val);
+	if (ret < 0)
+		dev_err(sled->cdev.dev, "error updating LED status\n");
+}
+
+static int syscon_led_probe(struct platform_device *pdev)
+{
+	struct led_init_data init_data = {};
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev_of_node(dev);
+	struct device *parent;
+	struct regmap *map;
+	struct syscon_led *sled;
+	enum led_default_state state;
+	u32 value;
+	int ret;
+
+	parent = dev->parent;
+	if (!parent) {
+		dev_err(dev, "no parent for syscon LED\n");
+		return -ENODEV;
+	}
+	map = syscon_node_to_regmap(dev_of_node(parent));
+	if (IS_ERR(map)) {
+		dev_err(dev, "no regmap for syscon LED parent\n");
+		return PTR_ERR(map);
+	}
+
+	sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
+	if (!sled)
+		return -ENOMEM;
+
+	sled->map = map;
+
+	if (of_property_read_u32(np, "reg", &sled->offset) &&
+	    of_property_read_u32(np, "offset", &sled->offset))
+		return -EINVAL;
+	if (of_property_read_u32(np, "mask", &sled->mask))
+		return -EINVAL;
+
+	init_data.fwnode = of_fwnode_handle(np);
+
+	state = led_init_default_state_get(init_data.fwnode);
+	switch (state) {
+	case LEDS_DEFSTATE_ON:
+		ret = regmap_update_bits(map, sled->offset, sled->mask, sled->mask);
+		if (ret < 0)
+			return ret;
+		sled->state = true;
+		break;
+	case LEDS_DEFSTATE_KEEP:
+		ret = regmap_read(map, sled->offset, &value);
+		if (ret < 0)
+			return ret;
+		sled->state = !!(value & sled->mask);
+		break;
+	default:
+		ret = regmap_update_bits(map, sled->offset, sled->mask, 0);
+		if (ret < 0)
+			return ret;
+		sled->state = false;
+	}
+	sled->cdev.brightness_set = syscon_led_set;
+
+	ret = devm_led_classdev_register_ext(dev, &sled->cdev, &init_data);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, sled);
+	dev_info(dev, "registered LED %s\n", sled->cdev.name);
+
+	return 0;
+}
+
+static const struct of_device_id of_syscon_leds_match[] = {
+	{ .compatible = "register-bit-led", },
+	{},
+};
+
+static struct platform_driver syscon_led_driver = {
+	.probe		= syscon_led_probe,
+	.driver		= {
+		.name	= "leds-syscon",
+		.of_match_table = of_syscon_leds_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(syscon_led_driver);