Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 256 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/zet6223.c b/drivers/input/touchscreen/zet6223.c
new file mode 100644
index 000000000..a341142f3
--- /dev/null
+++ b/drivers/input/touchscreen/zet6223.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016, Jelle van der Waa <jelle@vdwaa.nl>
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/unaligned.h>
+
+#define ZET6223_MAX_FINGERS		16
+#define ZET6223_MAX_PKT_SIZE		(3 + 4 * ZET6223_MAX_FINGERS)
+
+#define ZET6223_CMD_INFO		0xB2
+#define ZET6223_CMD_INFO_LENGTH		17
+#define ZET6223_VALID_PACKET		0x3c
+
+#define ZET6223_POWER_ON_DELAY_MSEC	30
+
+struct zet6223_ts {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct touchscreen_properties prop;
+	struct regulator_bulk_data supplies[2];
+	u16 max_x;
+	u16 max_y;
+	u8 fingernum;
+};
+
+static int zet6223_start(struct input_dev *dev)
+{
+	struct zet6223_ts *ts = input_get_drvdata(dev);
+
+	enable_irq(ts->client->irq);
+
+	return 0;
+}
+
+static void zet6223_stop(struct input_dev *dev)
+{
+	struct zet6223_ts *ts = input_get_drvdata(dev);
+
+	disable_irq(ts->client->irq);
+}
+
+static irqreturn_t zet6223_irq(int irq, void *dev_id)
+{
+	struct zet6223_ts *ts = dev_id;
+	u16 finger_bits;
+
+	/*
+	 * First 3 bytes are an identifier, two bytes of finger data.
+	 * X, Y data per finger is 4 bytes.
+	 */
+	u8 bufsize = 3 + 4 * ts->fingernum;
+	u8 buf[ZET6223_MAX_PKT_SIZE];
+	int i;
+	int ret;
+	int error;
+
+	ret = i2c_master_recv(ts->client, buf, bufsize);
+	if (ret != bufsize) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err_ratelimited(&ts->client->dev,
+				    "Error reading input data: %d\n", error);
+		return IRQ_HANDLED;
+	}
+
+	if (buf[0] != ZET6223_VALID_PACKET)
+		return IRQ_HANDLED;
+
+	finger_bits = get_unaligned_be16(buf + 1);
+	for (i = 0; i < ts->fingernum; i++) {
+		if (!(finger_bits & BIT(15 - i)))
+			continue;
+
+		input_mt_slot(ts->input, i);
+		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
+		input_event(ts->input, EV_ABS, ABS_MT_POSITION_X,
+				((buf[i + 3] >> 4) << 8) + buf[i + 4]);
+		input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y,
+				((buf[i + 3] & 0xF) << 8) + buf[i + 5]);
+	}
+
+	input_mt_sync_frame(ts->input);
+	input_sync(ts->input);
+
+	return IRQ_HANDLED;
+}
+
+static void zet6223_power_off(void *_ts)
+{
+	struct zet6223_ts *ts = _ts;
+
+	regulator_bulk_disable(ARRAY_SIZE(ts->supplies), ts->supplies);
+}
+
+static int zet6223_power_on(struct zet6223_ts *ts)
+{
+	struct device *dev = &ts->client->dev;
+	int error;
+
+	ts->supplies[0].supply = "vio";
+	ts->supplies[1].supply = "vcc";
+
+	error = devm_regulator_bulk_get(dev, ARRAY_SIZE(ts->supplies),
+					ts->supplies);
+	if (error)
+		return error;
+
+	error = regulator_bulk_enable(ARRAY_SIZE(ts->supplies), ts->supplies);
+	if (error)
+		return error;
+
+	msleep(ZET6223_POWER_ON_DELAY_MSEC);
+
+	error = devm_add_action_or_reset(dev, zet6223_power_off, ts);
+	if (error) {
+		dev_err(dev, "failed to install poweroff action: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int zet6223_query_device(struct zet6223_ts *ts)
+{
+	u8 buf[ZET6223_CMD_INFO_LENGTH];
+	u8 cmd = ZET6223_CMD_INFO;
+	int ret;
+	int error;
+
+	ret = i2c_master_send(ts->client, &cmd, sizeof(cmd));
+	if (ret != sizeof(cmd)) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(&ts->client->dev,
+			"touchpanel info cmd failed: %d\n", error);
+		return error;
+	}
+
+	ret = i2c_master_recv(ts->client, buf, sizeof(buf));
+	if (ret != sizeof(buf)) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(&ts->client->dev,
+			"failed to retrieve touchpanel info: %d\n", error);
+		return error;
+	}
+
+	ts->fingernum = buf[15] & 0x7F;
+	if (ts->fingernum > ZET6223_MAX_FINGERS) {
+		dev_warn(&ts->client->dev,
+			 "touchpanel reports %d fingers, limiting to %d\n",
+			 ts->fingernum, ZET6223_MAX_FINGERS);
+		ts->fingernum = ZET6223_MAX_FINGERS;
+	}
+
+	ts->max_x = get_unaligned_le16(&buf[8]);
+	ts->max_y = get_unaligned_le16(&buf[10]);
+
+	return 0;
+}
+
+static int zet6223_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct zet6223_ts *ts;
+	struct input_dev *input;
+	int error;
+
+	if (!client->irq) {
+		dev_err(dev, "no irq specified\n");
+		return -EINVAL;
+	}
+
+	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->client = client;
+
+	error = zet6223_power_on(ts);
+	if (error)
+		return error;
+
+	error = zet6223_query_device(ts);
+	if (error)
+		return error;
+
+	ts->input = input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input_set_drvdata(input, ts);
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->open = zet6223_start;
+	input->close = zet6223_stop;
+
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, ts->max_x, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ts->max_y, 0, 0);
+
+	touchscreen_parse_properties(input, true, &ts->prop);
+
+	error = input_mt_init_slots(input, ts->fingernum,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error)
+		return error;
+
+	error = devm_request_threaded_irq(dev, client->irq, NULL, zet6223_irq,
+					  IRQF_ONESHOT, client->name, ts);
+	if (error) {
+		dev_err(dev, "failed to request irq %d: %d\n",
+			client->irq, error);
+		return error;
+	}
+
+	zet6223_stop(input);
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct of_device_id zet6223_of_match[] = {
+	{ .compatible = "zeitec,zet6223" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, zet6223_of_match);
+
+static const struct i2c_device_id zet6223_id[] = {
+	{ .name = "zet6223" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, zet6223_id);
+
+static struct i2c_driver zet6223_driver = {
+	.driver = {
+		.name = "zet6223",
+		.of_match_table = zet6223_of_match,
+	},
+	.probe = zet6223_probe,
+	.id_table = zet6223_id
+};
+module_i2c_driver(zet6223_driver);
+
+MODULE_AUTHOR("Jelle van der Waa <jelle@vdwaa.nl>");
+MODULE_DESCRIPTION("ZEITEC zet622x I2C touchscreen driver");
+MODULE_LICENSE("GPL");