Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

1 files changed, 467 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
new file mode 100644
index 000000000..087ece577
--- /dev/null
+++ b/drivers/input/touchscreen/wm9712.c
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wm9712.c  --  Codec driver for Wolfson WM9712 AC97 Codecs.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *                   Russell King <rmk@arm.linux.org.uk>
+ */
+
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/wm97xx.h>
+
+#define TS_NAME			"wm97xx"
+#define WM9712_VERSION		"1.00"
+#define DEFAULT_PRESSURE	0xb0c0
+
+/*
+ * Module parameters
+ */
+
+/*
+ * Set internal pull up for pen detect.
+ *
+ * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive)
+ * i.e. pull up resistance = 64k Ohms / rpu.
+ *
+ * Adjust this value if you are having problems with pen detect not
+ * detecting any down event.
+ */
+static int rpu = 8;
+module_param(rpu, int, 0);
+MODULE_PARM_DESC(rpu, "Set internal pull up resistor for pen detect.");
+
+/*
+ * Set current used for pressure measurement.
+ *
+ * Set pil = 2 to use 400uA
+ *     pil = 1 to use 200uA and
+ *     pil = 0 to disable pressure measurement.
+ *
+ * This is used to increase the range of values returned by the adc
+ * when measureing touchpanel pressure.
+ */
+static int pil;
+module_param(pil, int, 0);
+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
+
+/*
+ * Set threshold for pressure measurement.
+ *
+ * Pen down pressure below threshold is ignored.
+ */
+static int pressure = DEFAULT_PRESSURE & 0xfff;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
+
+/*
+ * Set adc sample delay.
+ *
+ * For accurate touchpanel measurements, some settling time may be
+ * required between the switch matrix applying a voltage across the
+ * touchpanel plate and the ADC sampling the signal.
+ *
+ * This delay can be set by setting delay = n, where n is the array
+ * position of the delay in the array delay_table below.
+ * Long delays > 1ms are supported for completeness, but are not
+ * recommended.
+ */
+static int delay = 3;
+module_param(delay, int, 0);
+MODULE_PARM_DESC(delay, "Set adc sample delay.");
+
+/*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
+ * Set adc mask function.
+ *
+ * Sources of glitch noise, such as signals driving an LCD display, may feed
+ * through to the touch screen plates and affect measurement accuracy. In
+ * order to minimise this, a signal may be applied to the MASK pin to delay or
+ * synchronise the sampling.
+ *
+ * 0 = No delay or sync
+ * 1 = High on pin stops conversions
+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
+ * 3 = Edge triggered, edge on pin starts conversion after delay param
+ */
+static int mask;
+module_param(mask, int, 0);
+MODULE_PARM_DESC(mask, "Set adc mask function.");
+
+/*
+ * Coordinate Polling Enable.
+ *
+ * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together
+ * for every poll.
+ */
+static int coord;
+module_param(coord, int, 0);
+MODULE_PARM_DESC(coord, "Polling coordinate mode");
+
+/*
+ * ADC sample delay times in uS
+ */
+static const int delay_table[] = {
+	21,    /* 1 AC97 Link frames */
+	42,    /* 2 */
+	84,    /* 4 */
+	167,   /* 8 */
+	333,   /* 16 */
+	667,   /* 32 */
+	1000,  /* 48 */
+	1333,  /* 64 */
+	2000,  /* 96 */
+	2667,  /* 128 */
+	3333,  /* 160 */
+	4000,  /* 192 */
+	4667,  /* 224 */
+	5333,  /* 256 */
+	6000,  /* 288 */
+	0      /* No delay, switch matrix always on */
+};
+
+/*
+ * Delay after issuing a POLL command.
+ *
+ * The delay is 3 AC97 link frames + the touchpanel settling delay
+ */
+static inline void poll_delay(int d)
+{
+	udelay(3 * AC97_LINK_FRAME + delay_table[d]);
+}
+
+/*
+ * set up the physical settings of the WM9712
+ */
+static void wm9712_phy_init(struct wm97xx *wm)
+{
+	u16 dig1 = 0;
+	u16 dig2 = WM97XX_RPR | WM9712_RPU(1);
+
+	/* WM9712 rpu */
+	if (rpu) {
+		dig2 &= 0xffc0;
+		dig2 |= WM9712_RPU(rpu);
+		dev_dbg(wm->dev, "setting pen detect pull-up to %d Ohms\n",
+			64000 / rpu);
+	}
+
+	/* WM9712 five wire */
+	if (five_wire) {
+		dig2 |= WM9712_45W;
+		dev_dbg(wm->dev, "setting 5-wire touchscreen mode.\n");
+
+		if (pil) {
+			dev_warn(wm->dev, "pressure measurement is not "
+				 "supported in 5-wire mode\n");
+			pil = 0;
+		}
+	}
+
+	/* touchpanel pressure current*/
+	if (pil == 2) {
+		dig2 |= WM9712_PIL;
+		dev_dbg(wm->dev,
+			"setting pressure measurement current to 400uA.\n");
+	} else if (pil)
+		dev_dbg(wm->dev,
+			"setting pressure measurement current to 200uA.\n");
+	if (!pil)
+		pressure = 0;
+
+	/* polling mode sample settling delay */
+	if (delay < 0 || delay > 15) {
+		dev_dbg(wm->dev, "supplied delay out of range.\n");
+		delay = 4;
+	}
+	dig1 &= 0xff0f;
+	dig1 |= WM97XX_DELAY(delay);
+	dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.\n",
+		delay_table[delay]);
+
+	/* mask */
+	dig2 |= ((mask & 0x3) << 6);
+	if (mask) {
+		u16 reg;
+		/* Set GPIO4 as Mask Pin*/
+		reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
+		wm97xx_reg_write(wm, AC97_MISC_AFE, reg | WM97XX_GPIO_4);
+		reg = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+		wm97xx_reg_write(wm, AC97_GPIO_CFG, reg | WM97XX_GPIO_4);
+	}
+
+	/* wait - coord mode */
+	if (coord)
+		dig2 |= WM9712_WAIT;
+
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
+}
+
+static void wm9712_dig_enable(struct wm97xx *wm, int enable)
+{
+	u16 dig2 = wm->dig[2];
+
+	if (enable) {
+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
+				 dig2 | WM97XX_PRP_DET_DIG);
+		wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
+	} else
+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
+				 dig2 & ~WM97XX_PRP_DET_DIG);
+}
+
+static void wm9712_aux_prepare(struct wm97xx *wm)
+{
+	memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG);
+}
+
+static void wm9712_dig_restore(struct wm97xx *wm)
+{
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]);
+}
+
+static inline int is_pden(struct wm97xx *wm)
+{
+	return wm->dig[2] & WM9712_PDEN;
+}
+
+/*
+ * Read a sample from the WM9712 adc in polling mode.
+ */
+static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
+{
+	int timeout = 5 * delay;
+	bool wants_pen = adcsel & WM97XX_PEN_DOWN;
+
+	if (wants_pen && !wm->pen_probably_down) {
+		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+		if (!(data & WM97XX_PEN_DOWN))
+			return RC_PENUP;
+		wm->pen_probably_down = 1;
+	}
+
+	/* set up digitiser */
+	if (wm->mach_ops && wm->mach_ops->pre_sample)
+		wm->mach_ops->pre_sample(adcsel);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK)
+				| WM97XX_POLL | WM97XX_DELAY(delay));
+
+	/* wait 3 AC97 time slots + delay for conversion */
+	poll_delay(delay);
+
+	/* wait for POLL to go low */
+	while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL)
+	       && timeout) {
+		udelay(AC97_LINK_FRAME);
+		timeout--;
+	}
+
+	if (timeout <= 0) {
+		/* If PDEN is set, we can get a timeout when pen goes up */
+		if (is_pden(wm))
+			wm->pen_probably_down = 0;
+		else
+			dev_dbg(wm->dev, "adc sample timeout\n");
+		return RC_PENUP;
+	}
+
+	*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	if (wm->mach_ops && wm->mach_ops->post_sample)
+		wm->mach_ops->post_sample(adcsel);
+
+	/* check we have correct sample */
+	if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) {
+		dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x\n",
+			adcsel & WM97XX_ADCSEL_MASK,
+			*sample & WM97XX_ADCSEL_MASK);
+		return RC_AGAIN;
+	}
+
+	if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) {
+		/* Sometimes it reads a wrong value the first time. */
+		*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+		if (!(*sample & WM97XX_PEN_DOWN)) {
+			wm->pen_probably_down = 0;
+			return RC_PENUP;
+		}
+	}
+
+	return RC_VALID;
+}
+
+/*
+ * Read a coord from the WM9712 adc in polling mode.
+ */
+static int wm9712_poll_coord(struct wm97xx *wm, struct wm97xx_data *data)
+{
+	int timeout = 5 * delay;
+
+	if (!wm->pen_probably_down) {
+		u16 data_rd = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+		if (!(data_rd & WM97XX_PEN_DOWN))
+			return RC_PENUP;
+		wm->pen_probably_down = 1;
+	}
+
+	/* set up digitiser */
+	if (wm->mach_ops && wm->mach_ops->pre_sample)
+		wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
+
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
+		WM97XX_COO | WM97XX_POLL | WM97XX_DELAY(delay));
+
+	/* wait 3 AC97 time slots + delay for conversion and read x */
+	poll_delay(delay);
+	data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	/* wait for POLL to go low */
+	while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL)
+	       && timeout) {
+		udelay(AC97_LINK_FRAME);
+		timeout--;
+	}
+
+	if (timeout <= 0) {
+		/* If PDEN is set, we can get a timeout when pen goes up */
+		if (is_pden(wm))
+			wm->pen_probably_down = 0;
+		else
+			dev_dbg(wm->dev, "adc sample timeout\n");
+		return RC_PENUP;
+	}
+
+	/* read back y data */
+	data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	if (pil)
+		data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	else
+		data->p = DEFAULT_PRESSURE;
+
+	if (wm->mach_ops && wm->mach_ops->post_sample)
+		wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
+
+	/* check we have correct sample */
+	if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y))
+		goto err;
+	if (pil && !(data->p & WM97XX_ADCSEL_PRES))
+		goto err;
+
+	if (!(data->x & WM97XX_PEN_DOWN) || !(data->y & WM97XX_PEN_DOWN)) {
+		wm->pen_probably_down = 0;
+		return RC_PENUP;
+	}
+	return RC_VALID;
+err:
+	return 0;
+}
+
+/*
+ * Sample the WM9712 touchscreen in polling mode
+ */
+static int wm9712_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
+{
+	int rc;
+
+	if (coord) {
+		rc = wm9712_poll_coord(wm, data);
+		if (rc != RC_VALID)
+			return rc;
+	} else {
+		rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN,
+					&data->x);
+		if (rc != RC_VALID)
+			return rc;
+
+		rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN,
+					&data->y);
+		if (rc != RC_VALID)
+			return rc;
+
+		if (pil && !five_wire) {
+			rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN,
+						&data->p);
+			if (rc != RC_VALID)
+				return rc;
+		} else
+			data->p = DEFAULT_PRESSURE;
+	}
+	return RC_VALID;
+}
+
+/*
+ * Enable WM9712 continuous mode, i.e. touch data is streamed across
+ * an AC97 slot
+ */
+static int wm9712_acc_enable(struct wm97xx *wm, int enable)
+{
+	u16 dig1, dig2;
+	int ret = 0;
+
+	dig1 = wm->dig[1];
+	dig2 = wm->dig[2];
+
+	if (enable) {
+		/* continuous mode */
+		if (wm->mach_ops->acc_startup) {
+			ret = wm->mach_ops->acc_startup(wm);
+			if (ret < 0)
+				return ret;
+		}
+		dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK |
+			WM97XX_DELAY_MASK | WM97XX_SLT_MASK);
+		dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN |
+			WM97XX_DELAY(delay) |
+			WM97XX_SLT(wm->acc_slot) |
+			WM97XX_RATE(wm->acc_rate);
+		if (pil)
+			dig1 |= WM97XX_ADCSEL_PRES;
+		dig2 |= WM9712_PDEN;
+	} else {
+		dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN);
+		dig2 &= ~WM9712_PDEN;
+		if (wm->mach_ops->acc_shutdown)
+			wm->mach_ops->acc_shutdown(wm);
+	}
+
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
+
+	return 0;
+}
+
+struct wm97xx_codec_drv wm9712_codec = {
+	.id = WM9712_ID2,
+	.name = "wm9712",
+	.poll_sample = wm9712_poll_sample,
+	.poll_touch = wm9712_poll_touch,
+	.acc_enable = wm9712_acc_enable,
+	.phy_init = wm9712_phy_init,
+	.dig_enable = wm9712_dig_enable,
+	.dig_restore = wm9712_dig_restore,
+	.aux_prepare = wm9712_aux_prepare,
+};
+EXPORT_SYMBOL_GPL(wm9712_codec);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
+MODULE_DESCRIPTION("WM9712 Touch Screen Driver");
+MODULE_LICENSE("GPL");