drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 156 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/ipaq-micro-ts.c b/drivers/input/touchscreen/ipaq-micro-ts.c
new file mode 100644
index 000000000..243e6465d
--- /dev/null
+++ b/drivers/input/touchscreen/ipaq-micro-ts.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * h3600 atmel micro companion support, touchscreen subdevice
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Dmitry Artamonow <mad_soft@inbox.ru>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <asm/byteorder.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mfd/ipaq-micro.h>
+
+struct touchscreen_data {
+	struct input_dev *input;
+	struct ipaq_micro *micro;
+};
+
+static void micro_ts_receive(void *data, int len, unsigned char *msg)
+{
+	struct touchscreen_data *ts = data;
+
+	if (len == 4) {
+		input_report_abs(ts->input, ABS_X,
+				 be16_to_cpup((__be16 *) &msg[2]));
+		input_report_abs(ts->input, ABS_Y,
+				 be16_to_cpup((__be16 *) &msg[0]));
+		input_report_key(ts->input, BTN_TOUCH, 1);
+		input_sync(ts->input);
+	} else if (len == 0) {
+		input_report_abs(ts->input, ABS_X, 0);
+		input_report_abs(ts->input, ABS_Y, 0);
+		input_report_key(ts->input, BTN_TOUCH, 0);
+		input_sync(ts->input);
+	}
+}
+
+static void micro_ts_toggle_receive(struct touchscreen_data *ts, bool enable)
+{
+	struct ipaq_micro *micro = ts->micro;
+
+	guard(spinlock_irq)(&micro->lock);
+
+	if (enable) {
+		micro->ts = micro_ts_receive;
+		micro->ts_data = ts;
+	} else {
+		micro->ts = NULL;
+		micro->ts_data = NULL;
+	}
+}
+
+static int micro_ts_open(struct input_dev *input)
+{
+	struct touchscreen_data *ts = input_get_drvdata(input);
+
+	micro_ts_toggle_receive(ts, true);
+
+	return 0;
+}
+
+static void micro_ts_close(struct input_dev *input)
+{
+	struct touchscreen_data *ts = input_get_drvdata(input);
+
+	micro_ts_toggle_receive(ts, false);
+}
+
+static int micro_ts_probe(struct platform_device *pdev)
+{
+	struct ipaq_micro *micro = dev_get_drvdata(pdev->dev.parent);
+	struct touchscreen_data *ts;
+	int error;
+
+	ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->micro = micro;
+
+	ts->input = devm_input_allocate_device(&pdev->dev);
+	if (!ts->input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	ts->input->name = "ipaq micro ts";
+	ts->input->open = micro_ts_open;
+	ts->input->close = micro_ts_close;
+
+	input_set_drvdata(ts->input, ts);
+
+	input_set_capability(ts->input, EV_KEY, BTN_TOUCH);
+	input_set_capability(ts->input, EV_ABS, ABS_X);
+	input_set_capability(ts->input, EV_ABS, ABS_Y);
+	input_set_abs_params(ts->input, ABS_X, 0, 1023, 0, 0);
+	input_set_abs_params(ts->input, ABS_Y, 0, 1023, 0, 0);
+
+	error = input_register_device(ts->input);
+	if (error) {
+		dev_err(&pdev->dev, "error registering touch input\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, ts);
+
+	dev_info(&pdev->dev, "iPAQ micro touchscreen\n");
+
+	return 0;
+}
+
+static int micro_ts_suspend(struct device *dev)
+{
+	struct touchscreen_data *ts = dev_get_drvdata(dev);
+
+	micro_ts_toggle_receive(ts, false);
+
+	return 0;
+}
+
+static int micro_ts_resume(struct device *dev)
+{
+	struct touchscreen_data *ts = dev_get_drvdata(dev);
+	struct input_dev *input = ts->input;
+
+	guard(mutex)(&input->mutex);
+
+	if (input_device_enabled(input))
+		micro_ts_toggle_receive(ts, true);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(micro_ts_dev_pm_ops,
+				micro_ts_suspend, micro_ts_resume);
+
+static struct platform_driver micro_ts_device_driver = {
+	.driver	= {
+		.name	= "ipaq-micro-ts",
+		.pm	= pm_sleep_ptr(&micro_ts_dev_pm_ops),
+	},
+	.probe	= micro_ts_probe,
+};
+module_platform_driver(micro_ts_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro touchscreen");
+MODULE_ALIAS("platform:ipaq-micro-ts");