kbuild: rust: keep Rust objects out of Clang LTO with inline helpersgrafted

Under `CONFIG_LTO_CLANG` + `CONFIG_RUST_INLINE_HELPERS`, one may hit
`objtool` errors such as:

    vmlinux.o: error: objtool: _R..._3Gsp4boot+0xd6a:
    can't find jump dest instruction at .text._R..._3Gsp4boot+0x1dfd

The reason is that in such builds, the Clang invocation that compiles
the combined Rust plus helpers bitcode emits LLVM bitcode (again) --
the final code generation happens in the linker's LTO step, which the
`-mllvm` trap options passed to Clang do not reach.

This, in turn, means that unreachable traps are missing, and the
impossible paths do not merely fallthrough to the next symbol, but past
the end of their own section, since LTO builds place each function in
its own section.

Thus filter `CC_FLAGS_LTO` out of the Clang invocation, so that it always
emits machine code directly, with the traps in place.

Assisted-by: LLM
Cc: Gary Guo <gary@garyguo.net>
Cc: Boqun Feng <boqun@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 3a2486cc1da5 ("kbuild: rust: provide an option to inline C helpers into Rust")
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260816133233.197500-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

1 files changed, 169 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
new file mode 100644
index 000000000..2baeb4f3b
--- /dev/null
+++ b/drivers/input/touchscreen/gunze.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ */
+
+/*
+ * Gunze AHL-51S touchscreen driver for Linux
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Gunze AHL-51S touchscreen driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define	GUNZE_MAX_LENGTH	10
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct gunze {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[GUNZE_MAX_LENGTH];
+	char phys[32];
+};
+
+static void gunze_process_packet(struct gunze *gunze)
+{
+	struct input_dev *dev = gunze->dev;
+
+	if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' ||
+		(gunze->data[0] != 'T' && gunze->data[0] != 'R')) {
+		printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data);
+		return;
+	}
+
+	input_report_abs(dev, ABS_X, simple_strtoul(gunze->data + 1, NULL, 10));
+	input_report_abs(dev, ABS_Y, 1024 - simple_strtoul(gunze->data + 6, NULL, 10));
+	input_report_key(dev, BTN_TOUCH, gunze->data[0] == 'T');
+	input_sync(dev);
+}
+
+static irqreturn_t gunze_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct gunze *gunze = serio_get_drvdata(serio);
+
+	if (data == '\r') {
+		gunze_process_packet(gunze);
+		gunze->idx = 0;
+	} else {
+		if (gunze->idx < GUNZE_MAX_LENGTH)
+			gunze->data[gunze->idx++] = data;
+	}
+	return IRQ_HANDLED;
+}
+
+/*
+ * gunze_disconnect() is the opposite of gunze_connect()
+ */
+
+static void gunze_disconnect(struct serio *serio)
+{
+	struct gunze *gunze = serio_get_drvdata(serio);
+
+	input_get_device(gunze->dev);
+	input_unregister_device(gunze->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(gunze->dev);
+	kfree(gunze);
+}
+
+/*
+ * gunze_connect() is the routine that is called when someone adds a
+ * new serio device that supports Gunze protocol and registers it as
+ * an input device.
+ */
+
+static int gunze_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct gunze *gunze;
+	struct input_dev *input_dev;
+	int err;
+
+	gunze = kzalloc_obj(*gunze);
+	input_dev = input_allocate_device();
+	if (!gunze || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	gunze->serio = serio;
+	gunze->dev = input_dev;
+	scnprintf(gunze->phys, sizeof(serio->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "Gunze AHL-51S TouchScreen";
+	input_dev->phys = gunze->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_GUNZE;
+	input_dev->id.product = 0x0051;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0);
+
+	serio_set_drvdata(serio, gunze);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(gunze->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(gunze);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static const struct serio_device_id gunze_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_GUNZE,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, gunze_serio_ids);
+
+static struct serio_driver gunze_drv = {
+	.driver		= {
+		.name	= "gunze",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= gunze_serio_ids,
+	.interrupt	= gunze_interrupt,
+	.connect	= gunze_connect,
+	.disconnect	= gunze_disconnect,
+};
+
+module_serio_driver(gunze_drv);