ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 169 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
new file mode 100644
index 000000000..2baeb4f3b
--- /dev/null
+++ b/drivers/input/touchscreen/gunze.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ */
+
+/*
+ * Gunze AHL-51S touchscreen driver for Linux
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Gunze AHL-51S touchscreen driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define	GUNZE_MAX_LENGTH	10
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct gunze {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[GUNZE_MAX_LENGTH];
+	char phys[32];
+};
+
+static void gunze_process_packet(struct gunze *gunze)
+{
+	struct input_dev *dev = gunze->dev;
+
+	if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' ||
+		(gunze->data[0] != 'T' && gunze->data[0] != 'R')) {
+		printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data);
+		return;
+	}
+
+	input_report_abs(dev, ABS_X, simple_strtoul(gunze->data + 1, NULL, 10));
+	input_report_abs(dev, ABS_Y, 1024 - simple_strtoul(gunze->data + 6, NULL, 10));
+	input_report_key(dev, BTN_TOUCH, gunze->data[0] == 'T');
+	input_sync(dev);
+}
+
+static irqreturn_t gunze_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct gunze *gunze = serio_get_drvdata(serio);
+
+	if (data == '\r') {
+		gunze_process_packet(gunze);
+		gunze->idx = 0;
+	} else {
+		if (gunze->idx < GUNZE_MAX_LENGTH)
+			gunze->data[gunze->idx++] = data;
+	}
+	return IRQ_HANDLED;
+}
+
+/*
+ * gunze_disconnect() is the opposite of gunze_connect()
+ */
+
+static void gunze_disconnect(struct serio *serio)
+{
+	struct gunze *gunze = serio_get_drvdata(serio);
+
+	input_get_device(gunze->dev);
+	input_unregister_device(gunze->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(gunze->dev);
+	kfree(gunze);
+}
+
+/*
+ * gunze_connect() is the routine that is called when someone adds a
+ * new serio device that supports Gunze protocol and registers it as
+ * an input device.
+ */
+
+static int gunze_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct gunze *gunze;
+	struct input_dev *input_dev;
+	int err;
+
+	gunze = kzalloc_obj(*gunze);
+	input_dev = input_allocate_device();
+	if (!gunze || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	gunze->serio = serio;
+	gunze->dev = input_dev;
+	scnprintf(gunze->phys, sizeof(serio->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "Gunze AHL-51S TouchScreen";
+	input_dev->phys = gunze->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_GUNZE;
+	input_dev->id.product = 0x0051;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0);
+
+	serio_set_drvdata(serio, gunze);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(gunze->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(gunze);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static const struct serio_device_id gunze_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_GUNZE,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, gunze_serio_ids);
+
+static struct serio_driver gunze_drv = {
+	.driver		= {
+		.name	= "gunze",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= gunze_serio_ids,
+	.interrupt	= gunze_interrupt,
+	.connect	= gunze_connect,
+	.disconnect	= gunze_disconnect,
+};
+
+module_serio_driver(gunze_drv);