Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 185 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/dynapro.c b/drivers/input/touchscreen/dynapro.c
new file mode 100644
index 000000000..943ba8c2f
--- /dev/null
+++ b/drivers/input/touchscreen/dynapro.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Dynapro serial touchscreen driver
+ *
+ * Copyright (c) 2009 Tias Guns
+ * Based on the inexio driver (c) Vojtech Pavlik and Dan Streetman and
+ * Richard Lemon
+ */
+
+
+/*
+ * 2009/09/19 Tias Guns <tias@ulyssis.org>
+ *   Copied inexio.c and edited for Dynapro protocol (from retired Xorg module)
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Dynapro serial touchscreen driver"
+
+MODULE_AUTHOR("Tias Guns <tias@ulyssis.org>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define DYNAPRO_FORMAT_TOUCH_BIT 0x40
+#define DYNAPRO_FORMAT_LENGTH 3
+#define DYNAPRO_RESPONSE_BEGIN_BYTE 0x80
+
+#define DYNAPRO_MIN_XC 0
+#define DYNAPRO_MAX_XC 0x3ff
+#define DYNAPRO_MIN_YC 0
+#define DYNAPRO_MAX_YC 0x3ff
+
+#define DYNAPRO_GET_XC(data) (data[1] | ((data[0] & 0x38) << 4))
+#define DYNAPRO_GET_YC(data) (data[2] | ((data[0] & 0x07) << 7))
+#define DYNAPRO_GET_TOUCHED(data) (DYNAPRO_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct dynapro {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[DYNAPRO_FORMAT_LENGTH];
+	char phys[32];
+};
+
+static void dynapro_process_data(struct dynapro *pdynapro)
+{
+	struct input_dev *dev = pdynapro->dev;
+
+	if (DYNAPRO_FORMAT_LENGTH == ++pdynapro->idx) {
+		input_report_abs(dev, ABS_X, DYNAPRO_GET_XC(pdynapro->data));
+		input_report_abs(dev, ABS_Y, DYNAPRO_GET_YC(pdynapro->data));
+		input_report_key(dev, BTN_TOUCH,
+				 DYNAPRO_GET_TOUCHED(pdynapro->data));
+		input_sync(dev);
+
+		pdynapro->idx = 0;
+	}
+}
+
+static irqreturn_t dynapro_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct dynapro *pdynapro = serio_get_drvdata(serio);
+
+	pdynapro->data[pdynapro->idx] = data;
+
+	if (DYNAPRO_RESPONSE_BEGIN_BYTE & pdynapro->data[0])
+		dynapro_process_data(pdynapro);
+	else
+		dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+			pdynapro->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+static void dynapro_disconnect(struct serio *serio)
+{
+	struct dynapro *pdynapro = serio_get_drvdata(serio);
+
+	input_get_device(pdynapro->dev);
+	input_unregister_device(pdynapro->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(pdynapro->dev);
+	kfree(pdynapro);
+}
+
+/*
+ * dynapro_connect() is the routine that is called when someone adds a
+ * new serio device that supports dynapro protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int dynapro_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct dynapro *pdynapro;
+	struct input_dev *input_dev;
+	int err;
+
+	pdynapro = kzalloc_obj(*pdynapro);
+	input_dev = input_allocate_device();
+	if (!pdynapro || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	pdynapro->serio = serio;
+	pdynapro->dev = input_dev;
+	scnprintf(pdynapro->phys, sizeof(pdynapro->phys),
+		  "%s/input0", serio->phys);
+
+	input_dev->name = "Dynapro Serial TouchScreen";
+	input_dev->phys = pdynapro->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_DYNAPRO;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(pdynapro->dev, ABS_X,
+			     DYNAPRO_MIN_XC, DYNAPRO_MAX_XC, 0, 0);
+	input_set_abs_params(pdynapro->dev, ABS_Y,
+			     DYNAPRO_MIN_YC, DYNAPRO_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, pdynapro);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(pdynapro->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(pdynapro);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static const struct serio_device_id dynapro_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_DYNAPRO,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, dynapro_serio_ids);
+
+static struct serio_driver dynapro_drv = {
+	.driver		= {
+		.name	= "dynapro",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= dynapro_serio_ids,
+	.interrupt	= dynapro_interrupt,
+	.connect	= dynapro_connect,
+	.disconnect	= dynapro_disconnect,
+};
+
+module_serio_driver(dynapro_drv);