drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 204 insertions, 0 deletions

diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c
new file mode 100644
index 000000000..6ce70c8e2
--- /dev/null
+++ b/drivers/input/tablet/kbtab.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/unaligned.h>
+
+/*
+ * Pressure-threshold modules param code from Alex Perry <alex.perry@ieee.org>
+ */
+
+MODULE_AUTHOR("Josh Myer <josh@joshisanerd.com>");
+MODULE_DESCRIPTION("USB KB Gear JamStudio Tablet driver");
+MODULE_LICENSE("GPL");
+
+#define USB_VENDOR_ID_KBGEAR	0x084e
+
+static int kb_pressure_click = 0x10;
+module_param(kb_pressure_click, int, 0);
+MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks");
+
+struct kbtab {
+	unsigned char *data;
+	dma_addr_t data_dma;
+	struct input_dev *dev;
+	struct usb_interface *intf;
+	struct urb *irq;
+	char phys[32];
+};
+
+static void kbtab_irq(struct urb *urb)
+{
+	struct kbtab *kbtab = urb->context;
+	unsigned char *data = kbtab->data;
+	struct input_dev *dev = kbtab->dev;
+	int pressure;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&kbtab->intf->dev,
+			"%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
+		return;
+	default:
+		dev_dbg(&kbtab->intf->dev,
+			"%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
+		goto exit;
+	}
+
+
+	input_report_key(dev, BTN_TOOL_PEN, 1);
+
+	input_report_abs(dev, ABS_X, get_unaligned_le16(&data[1]));
+	input_report_abs(dev, ABS_Y, get_unaligned_le16(&data[3]));
+
+	/*input_report_key(dev, BTN_TOUCH , data[0] & 0x01);*/
+	input_report_key(dev, BTN_RIGHT, data[0] & 0x02);
+
+	pressure = data[5];
+	if (kb_pressure_click == -1)
+		input_report_abs(dev, ABS_PRESSURE, pressure);
+	else
+		input_report_key(dev, BTN_LEFT, pressure > kb_pressure_click ? 1 : 0);
+
+	input_sync(dev);
+
+ exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(&kbtab->intf->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
+}
+
+static const struct usb_device_id kbtab_ids[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_KBGEAR, 0x1001), .driver_info = 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, kbtab_ids);
+
+static int kbtab_open(struct input_dev *dev)
+{
+	struct kbtab *kbtab = input_get_drvdata(dev);
+	struct usb_device *udev = interface_to_usbdev(kbtab->intf);
+
+	kbtab->irq->dev = udev;
+	if (usb_submit_urb(kbtab->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void kbtab_close(struct input_dev *dev)
+{
+	struct kbtab *kbtab = input_get_drvdata(dev);
+
+	usb_kill_urb(kbtab->irq);
+}
+
+static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct kbtab *kbtab;
+	struct input_dev *input_dev;
+	int error = -ENOMEM;
+
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+	if (!usb_endpoint_is_int_in(endpoint))
+		return -ENODEV;
+
+	kbtab = kzalloc_obj(*kbtab);
+	input_dev = input_allocate_device();
+	if (!kbtab || !input_dev)
+		goto fail1;
+
+	kbtab->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &kbtab->data_dma);
+	if (!kbtab->data)
+		goto fail1;
+
+	kbtab->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!kbtab->irq)
+		goto fail2;
+
+	kbtab->intf = intf;
+	kbtab->dev = input_dev;
+
+	usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys));
+	strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys));
+
+	input_dev->name = "KB Gear Tablet";
+	input_dev->phys = kbtab->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, kbtab);
+
+	input_dev->open = kbtab_open;
+	input_dev->close = kbtab_close;
+
+	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_LEFT)] |=
+		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
+	input_dev->keybit[BIT_WORD(BTN_DIGI)] |=
+		BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
+
+	usb_fill_int_urb(kbtab->irq, dev,
+			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+			 kbtab->data, 8,
+			 kbtab_irq, kbtab, endpoint->bInterval);
+	kbtab->irq->transfer_dma = kbtab->data_dma;
+	kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	error = input_register_device(kbtab->dev);
+	if (error)
+		goto fail3;
+
+	usb_set_intfdata(intf, kbtab);
+
+	return 0;
+
+ fail3:	usb_free_urb(kbtab->irq);
+ fail2:	usb_free_coherent(dev, 8, kbtab->data, kbtab->data_dma);
+ fail1:	input_free_device(input_dev);
+	kfree(kbtab);
+	return error;
+}
+
+static void kbtab_disconnect(struct usb_interface *intf)
+{
+	struct kbtab *kbtab = usb_get_intfdata(intf);
+	struct usb_device *udev = interface_to_usbdev(intf);
+
+	usb_set_intfdata(intf, NULL);
+
+	input_unregister_device(kbtab->dev);
+	usb_free_urb(kbtab->irq);
+	usb_free_coherent(udev, 8, kbtab->data, kbtab->data_dma);
+	kfree(kbtab);
+}
+
+static struct usb_driver kbtab_driver = {
+	.name =		"kbtab",
+	.probe =	kbtab_probe,
+	.disconnect =	kbtab_disconnect,
+	.id_table =	kbtab_ids,
+};
+
+module_usb_driver(kbtab_driver);