drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 254 insertions, 0 deletions

diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
new file mode 100644
index 000000000..ba79dff21
--- /dev/null
+++ b/drivers/input/tablet/acecad.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 2001-2005 Edouard TISSERANT   <edouard.tisserant@wanadoo.fr>
+ *  Copyright (c) 2004-2005 Stephane VOLTZ      <svoltz@numericable.fr>
+ *
+ *  USB Acecad "Acecad Flair" tablet support
+ *
+ *  Changelog:
+ *      v3.2 - Added sysfs support
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+
+MODULE_AUTHOR("Edouard TISSERANT <edouard.tisserant@wanadoo.fr>");
+MODULE_DESCRIPTION("USB Acecad Flair tablet driver");
+MODULE_LICENSE("GPL");
+
+#define USB_VENDOR_ID_ACECAD	0x0460
+#define USB_DEVICE_ID_FLAIR	0x0004
+#define USB_DEVICE_ID_302	0x0008
+
+struct usb_acecad {
+	char name[128];
+	char phys[64];
+	struct usb_interface *intf;
+	struct input_dev *input;
+	struct urb *irq;
+
+	unsigned char *data;
+	dma_addr_t data_dma;
+};
+
+static void usb_acecad_irq(struct urb *urb)
+{
+	struct usb_acecad *acecad = urb->context;
+	unsigned char *data = acecad->data;
+	struct input_dev *dev = acecad->input;
+	struct usb_interface *intf = acecad->intf;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	int prox, status;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
+		return;
+	default:
+		dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
+		goto resubmit;
+	}
+
+	prox = (data[0] & 0x04) >> 2;
+	input_report_key(dev, BTN_TOOL_PEN, prox);
+
+	if (prox) {
+		int x = data[1] | (data[2] << 8);
+		int y = data[3] | (data[4] << 8);
+		/* Pressure should compute the same way for flair and 302 */
+		int pressure = data[5] | (data[6] << 8);
+		int touch = data[0] & 0x01;
+		int stylus = (data[0] & 0x10) >> 4;
+		int stylus2 = (data[0] & 0x20) >> 5;
+		input_report_abs(dev, ABS_X, x);
+		input_report_abs(dev, ABS_Y, y);
+		input_report_abs(dev, ABS_PRESSURE, pressure);
+		input_report_key(dev, BTN_TOUCH, touch);
+		input_report_key(dev, BTN_STYLUS, stylus);
+		input_report_key(dev, BTN_STYLUS2, stylus2);
+	}
+
+	/* event termination */
+	input_sync(dev);
+
+resubmit:
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status)
+		dev_err(&intf->dev,
+			"can't resubmit intr, %s-%s/input0, status %d\n",
+			udev->bus->bus_name,
+			udev->devpath, status);
+}
+
+static int usb_acecad_open(struct input_dev *dev)
+{
+	struct usb_acecad *acecad = input_get_drvdata(dev);
+
+	acecad->irq->dev = interface_to_usbdev(acecad->intf);
+	if (usb_submit_urb(acecad->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void usb_acecad_close(struct input_dev *dev)
+{
+	struct usb_acecad *acecad = input_get_drvdata(dev);
+
+	usb_kill_urb(acecad->irq);
+}
+
+static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_host_interface *interface = intf->cur_altsetting;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_acecad *acecad;
+	struct input_dev *input_dev;
+	int pipe, maxp;
+	int err;
+
+	if (interface->desc.bNumEndpoints != 1)
+		return -ENODEV;
+
+	endpoint = &interface->endpoint[0].desc;
+
+	if (!usb_endpoint_is_int_in(endpoint))
+		return -ENODEV;
+
+	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(dev, pipe);
+
+	acecad = kzalloc_obj(*acecad);
+	input_dev = input_allocate_device();
+	if (!acecad || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	acecad->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &acecad->data_dma);
+	if (!acecad->data) {
+		err= -ENOMEM;
+		goto fail1;
+	}
+
+	acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!acecad->irq) {
+		err = -ENOMEM;
+		goto fail2;
+	}
+
+	acecad->intf = intf;
+	acecad->input = input_dev;
+
+	if (dev->manufacturer)
+		strscpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
+
+	if (dev->product) {
+		if (dev->manufacturer)
+			strlcat(acecad->name, " ", sizeof(acecad->name));
+		strlcat(acecad->name, dev->product, sizeof(acecad->name));
+	}
+
+	usb_make_path(dev, acecad->phys, sizeof(acecad->phys));
+	strlcat(acecad->phys, "/input0", sizeof(acecad->phys));
+
+	input_dev->name = acecad->name;
+	input_dev->phys = acecad->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, acecad);
+
+	input_dev->open = usb_acecad_open;
+	input_dev->close = usb_acecad_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_TOOL_PEN) |
+		BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS) |
+		BIT_MASK(BTN_STYLUS2);
+
+	switch (id->driver_info) {
+	case 0:
+		input_set_abs_params(input_dev, ABS_X, 0, 5000, 4, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, 3750, 4, 0);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 512, 0, 0);
+		if (!strlen(acecad->name))
+			snprintf(acecad->name, sizeof(acecad->name),
+				"USB Acecad Flair Tablet %04x:%04x",
+				le16_to_cpu(dev->descriptor.idVendor),
+				le16_to_cpu(dev->descriptor.idProduct));
+		break;
+
+	case 1:
+		input_set_abs_params(input_dev, ABS_X, 0, 53000, 4, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, 2250, 4, 0);
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1024, 0, 0);
+		if (!strlen(acecad->name))
+			snprintf(acecad->name, sizeof(acecad->name),
+				"USB Acecad 302 Tablet %04x:%04x",
+				le16_to_cpu(dev->descriptor.idVendor),
+				le16_to_cpu(dev->descriptor.idProduct));
+		break;
+	}
+
+	usb_fill_int_urb(acecad->irq, dev, pipe,
+			acecad->data, maxp > 8 ? 8 : maxp,
+			usb_acecad_irq, acecad, endpoint->bInterval);
+	acecad->irq->transfer_dma = acecad->data_dma;
+	acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	err = input_register_device(acecad->input);
+	if (err)
+		goto fail3;
+
+	usb_set_intfdata(intf, acecad);
+
+	return 0;
+
+ fail3:	usb_free_urb(acecad->irq);
+ fail2:	usb_free_coherent(dev, 8, acecad->data, acecad->data_dma);
+ fail1: input_free_device(input_dev);
+	kfree(acecad);
+	return err;
+}
+
+static void usb_acecad_disconnect(struct usb_interface *intf)
+{
+	struct usb_acecad *acecad = usb_get_intfdata(intf);
+	struct usb_device *udev = interface_to_usbdev(intf);
+
+	usb_set_intfdata(intf, NULL);
+
+	input_unregister_device(acecad->input);
+	usb_free_urb(acecad->irq);
+	usb_free_coherent(udev, 8, acecad->data, acecad->data_dma);
+	kfree(acecad);
+}
+
+static const struct usb_device_id usb_acecad_id_table[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
+	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302),	 .driver_info = 1 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
+
+static struct usb_driver usb_acecad_driver = {
+	.name =		"usb_acecad",
+	.probe =	usb_acecad_probe,
+	.disconnect =	usb_acecad_disconnect,
+	.id_table =	usb_acecad_id_table,
+};
+
+module_usb_driver(usb_acecad_driver);