sched_ext: Maintain an online cid mask in the scheduler arenagrafted

Schedulers on the default cid mapping treat [0, nr_online_cids) as the
online set and restart on hotplug. Schedulers that install their own mapping
with scx_bpf_cid_override() have no way to learn which cids are online: the
count no longer identifies members and the CPU-form cpumask is unusable from
cid programs. This is an obvious hole in the cid API.

Add scx_bpf_online_cmask(), a kernel-maintained cmask in the scheduler's
arena, allocated alongside the per-CPU scratch masks and populated after the
cid mapping is finalized and before ops.init(), for child schedulers too.
The pointer stays valid through ops.exit() with no reference to take. It is
the arena offset as a void pointer, the same form struct_ops arena arguments
arrive in. The verifier types the void return as a scalar for the program's
arena cast.

The mask follows the SCX hotplug notifications: seeded from cpu_active_mask
and updated before ops.cid_online/offline() runs, so it lags cpu_online_mask
only inside a hotplug transition. Updates walk the scheduler list under the
lock that also serializes unlinking. Reads are live, not atomic snapshots.
Root initialization excludes hotplug.

v2: Reworded the getter kerneldoc (Andrea Righi).

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>

36 files changed, 14500 insertions, 0 deletions

diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
new file mode 100644
index 000000000..bacab1f58
--- /dev/null
+++ b/drivers/input/serio/Kconfig
@@ -0,0 +1,299 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Input core configuration
+#
+config SERIO
+	tristate "Serial I/O support"
+	default y
+	help
+	  Say Yes here if you have any input device that uses serial I/O to
+	  communicate with the system. This includes the
+	  		* standard AT keyboard and PS/2 mouse *
+	  as well as serial mice, Sun keyboards, some joysticks and 6dof
+	  devices and more.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called serio.
+
+config ARCH_MIGHT_HAVE_PC_SERIO
+	bool
+	help
+	  Select this config option from the architecture Kconfig if
+	  the architecture might use a PC serio device (i8042) to
+	  communicate with keyboard, mouse, etc.
+
+if SERIO
+
+config SERIO_I8042
+	tristate "i8042 PC Keyboard controller"
+	default y
+	depends on ARCH_MIGHT_HAVE_PC_SERIO
+	help
+	  i8042 is the chip over which the standard AT keyboard and PS/2
+	  mouse are connected to the computer. If you use these devices,
+	  you'll need to say Y here.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called i8042.
+
+config SERIO_SERPORT
+	tristate "Serial port line discipline"
+	default y
+	depends on TTY
+	help
+	  Say Y here if you plan to use an input device (mouse, joystick,
+	  tablet, 6dof) that communicates over the RS232 serial (COM) port.
+
+	  More information is available: <file:Documentation/input/input.rst>
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called serport.
+
+config SERIO_Q40KBD
+	tristate "Q40 keyboard controller"
+	depends on Q40
+
+config SERIO_PARKBD
+	tristate "Parallel port keyboard adapter"
+	depends on PARPORT
+	help
+	  Say Y here if you built a simple parallel port adapter to attach
+	  an additional AT keyboard, XT keyboard or PS/2 mouse.
+
+	  More information is available: <file:Documentation/input/input.rst>
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called parkbd.
+
+config SERIO_RPCKBD
+	tristate "Acorn RiscPC keyboard controller"
+	depends on ARCH_ACORN
+	default y
+	help
+	  Say Y here if you have the Acorn RiscPC and want to use an AT
+	  keyboard connected to its keyboard controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rpckbd.
+
+config SERIO_AMBAKMI
+	tristate "AMBA KMI keyboard controller"
+	depends on ARM_AMBA
+
+config SERIO_SA1111
+	tristate "Intel SA1111 keyboard controller"
+	depends on SA1111
+
+config SERIO_GSCPS2
+	tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
+	depends on GSC
+	default y
+	help
+	  This driver provides support for the PS/2 ports on PA-RISC machines
+	  over which HP PS/2 keyboards and PS/2 mice may be connected.
+	  If you use these devices, you'll need to say Y here.
+
+	  It's safe to enable this driver, so if unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gscps2.
+
+config HP_SDC
+	tristate "HP System Device Controller i8042 Support"
+	depends on (GSC || HP300) && SERIO
+	default y
+	help
+	  This option enables support for the "System Device
+	  Controller", an i8042 carrying microcode to manage a
+	  few miscellaneous devices on some Hewlett Packard systems.
+	  The SDC itself contains a 10ms resolution timer/clock capable
+	  of delivering interrupts on a periodic and one-shot basis.
+	  The SDC may also be connected to a battery-backed real-time
+	  clock, a basic audio waveform generator, and an HP-HIL Master
+	  Link Controller serving up to seven input devices.
+
+	  By itself this option is rather useless, but enabling it will
+	  enable selection of drivers for the abovementioned devices.
+	  It is, however, incompatible with the old, reliable HIL keyboard
+	  driver, and the new HIL driver is experimental, so if you plan
+	  to use a HIL keyboard as your primary keyboard, you may wish
+	  to keep using that driver until the new HIL drivers have had
+	  more testing.
+
+config HIL_MLC
+	tristate "HIL MLC Support (needed for HIL input devices)"
+	depends on HP_SDC
+
+config SERIO_PCIPS2
+	tristate "PCI PS/2 keyboard and PS/2 mouse controller"
+	depends on PCI
+	depends on HAS_IOPORT
+	help
+	  Say Y here if you have a Mobility Docking station with PS/2
+	  keyboard and mice ports.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcips2.
+
+config SERIO_MACEPS2
+	tristate "SGI O2 MACE PS/2 controller"
+	depends on SGI_IP32
+	help
+	  Say Y here if you have SGI O2 workstation and want to use its
+	  PS/2 ports.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called maceps2.
+
+config SERIO_SGI_IOC3
+	tristate "SGI IOC3 PS/2 controller"
+	depends on SGI_MFD_IOC3
+	help
+	  Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card
+	  and you want to attach and use a keyboard, mouse, or both.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ioc3kbd.
+
+config SERIO_LIBPS2
+	tristate "PS/2 driver library"
+	depends on SERIO_I8042 || SERIO_I8042=n
+	help
+	  Say Y here if you are using a driver for device connected
+	  to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called libps2.
+
+config SERIO_RAW
+	tristate "Raw access to serio ports"
+	help
+	  Say Y here if you want to have raw access to serio ports, such as
+	  AUX ports on i8042 keyboard controller. Each serio port that is
+	  bound to this driver will be accessible via a char device with
+	  major 10 and dynamically allocated minor. The driver will try
+	  allocating minor 1 (that historically corresponds to /dev/psaux)
+	  first. To bind this driver to a serio port use sysfs interface:
+
+	      echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called serio_raw.
+
+config SERIO_ALTERA_PS2
+	tristate "Altera UP PS/2 controller"
+	depends on HAS_IOMEM
+	help
+	  Say Y here if you have Altera University Program PS/2 ports.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called altera_ps2.
+
+config SERIO_AMS_DELTA
+	tristate "Amstrad Delta (E3) mailboard support"
+	depends on MACH_AMS_DELTA
+	default y
+	help
+	  Say Y here if you have an E3 and want to use its mailboard,
+	  or any standard AT keyboard connected to the mailboard port.
+
+	  When used for the E3 mailboard, a non-standard key table
+	  must be loaded from userspace, possibly using udev extras
+	  provided keymap helper utility.
+
+	  To compile this driver as a module, choose M here;
+	  the module will be called ams_delta_serio.
+
+config SERIO_PS2MULT
+	tristate "TQC PS/2 multiplexer"
+	help
+	  Say Y here if you have the PS/2 line multiplexer like the one
+	  present on TQC boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ps2mult.
+
+config SERIO_ARC_PS2
+	tristate "ARC PS/2 support"
+	depends on HAS_IOMEM
+	help
+	  Say Y here if you have an ARC FPGA platform with a PS/2
+	  controller in it.
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called arc_ps2.
+
+config SERIO_APBPS2
+	tristate "GRLIB APBPS2 PS/2 keyboard/mouse controller"
+	depends on OF && HAS_IOMEM
+	help
+	  Say Y here if you want support for GRLIB APBPS2 peripherals used
+	  to connect to PS/2 keyboard and/or mouse.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called apbps2.
+
+config SERIO_OLPC_APSP
+	tristate "OLPC AP-SP input support"
+	depends on ARCH_MMP || COMPILE_TEST
+	help
+	  Say Y here if you want support for the keyboard and touchpad included
+	  in the OLPC XO-1.75 and XO-4 laptops.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called olpc_apsp.
+
+config HYPERV_KEYBOARD
+	tristate "Microsoft Synthetic Keyboard driver"
+	depends on HYPERV_VMBUS
+	default HYPERV_VMBUS
+	help
+	  Select this option to enable the Hyper-V Keyboard driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called hyperv_keyboard.
+
+config SERIO_SUN4I_PS2
+	tristate "Allwinner A10 PS/2 controller support"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	help
+	  This selects support for the PS/2 Host Controller on
+	  Allwinner A10.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun4i-ps2.
+
+config SERIO_GPIO_PS2
+	tristate "GPIO PS/2 bit banging driver"
+	depends on GPIOLIB
+	help
+	  Say Y here if you want PS/2 bit banging support via GPIO.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ps2-gpio.
+
+	  If you are unsure, say N.
+
+config USERIO
+	tristate "User space serio port driver support"
+	help
+	  Say Y here if you want to support user level drivers for serio
+	  subsystem accessible under char device 10:240 - /dev/userio. Using
+	  this facility userspace programs can implement serio ports that
+	  will be used by the standard in-kernel serio consumer drivers,
+	  such as psmouse and atkbd.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called userio.
+
+	  If you are unsure, say N.
+
+endif
diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
new file mode 100644
index 000000000..7f5137dc0
--- /dev/null
+++ b/drivers/input/serio/Makefile
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the input core drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_SERIO)		+= serio.o
+obj-$(CONFIG_SERIO_I8042)	+= i8042.o
+obj-$(CONFIG_SERIO_PARKBD)	+= parkbd.o
+obj-$(CONFIG_SERIO_SERPORT)	+= serport.o
+obj-$(CONFIG_SERIO_RPCKBD)	+= rpckbd.o
+obj-$(CONFIG_SERIO_SA1111)	+= sa1111ps2.o
+obj-$(CONFIG_SERIO_AMBAKMI)	+= ambakmi.o
+obj-$(CONFIG_SERIO_Q40KBD)	+= q40kbd.o
+obj-$(CONFIG_SERIO_GSCPS2)	+= gscps2.o
+obj-$(CONFIG_HP_SDC)		+= hp_sdc.o
+obj-$(CONFIG_HIL_MLC)		+= hp_sdc_mlc.o hil_mlc.o
+obj-$(CONFIG_SERIO_PCIPS2)	+= pcips2.o
+obj-$(CONFIG_SERIO_PS2MULT)	+= ps2mult.o
+obj-$(CONFIG_SERIO_MACEPS2)	+= maceps2.o
+obj-$(CONFIG_SERIO_SGI_IOC3)	+= ioc3kbd.o
+obj-$(CONFIG_SERIO_LIBPS2)	+= libps2.o
+obj-$(CONFIG_SERIO_RAW)		+= serio_raw.o
+obj-$(CONFIG_SERIO_AMS_DELTA)	+= ams_delta_serio.o
+obj-$(CONFIG_SERIO_ALTERA_PS2)	+= altera_ps2.o
+obj-$(CONFIG_SERIO_ARC_PS2)	+= arc_ps2.o
+obj-$(CONFIG_SERIO_APBPS2)	+= apbps2.o
+obj-$(CONFIG_SERIO_OLPC_APSP)	+= olpc_apsp.o
+obj-$(CONFIG_HYPERV_KEYBOARD)	+= hyperv-keyboard.o
+obj-$(CONFIG_SERIO_SUN4I_PS2)	+= sun4i-ps2.o
+obj-$(CONFIG_SERIO_GPIO_PS2)	+= ps2-gpio.o
+obj-$(CONFIG_USERIO)		+= userio.o
diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c
new file mode 100644
index 000000000..4bf37db65
--- /dev/null
+++ b/drivers/input/serio/altera_ps2.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Altera University Program PS2 controller driver
+ *
+ * Copyright (C) 2008 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * Based on sa1111ps2.c, which is:
+ * Copyright (C) 2002 Russell King
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#define DRV_NAME "altera_ps2"
+
+struct ps2if {
+	struct serio *io;
+	void __iomem *base;
+};
+
+/*
+ * Read all bytes waiting in the PS2 port.  There should be
+ * at the most one, but we loop for safety.
+ */
+static irqreturn_t altera_ps2_rxint(int irq, void *dev_id)
+{
+	struct ps2if *ps2if = dev_id;
+	unsigned int status;
+	irqreturn_t handled = IRQ_NONE;
+
+	while ((status = readl(ps2if->base)) & 0xffff0000) {
+		serio_interrupt(ps2if->io, status & 0xff, 0);
+		handled = IRQ_HANDLED;
+	}
+
+	return handled;
+}
+
+/*
+ * Write a byte to the PS2 port.
+ */
+static int altera_ps2_write(struct serio *io, unsigned char val)
+{
+	struct ps2if *ps2if = io->port_data;
+
+	writel(val, ps2if->base);
+	return 0;
+}
+
+static int altera_ps2_open(struct serio *io)
+{
+	struct ps2if *ps2if = io->port_data;
+
+	/* clear fifo */
+	while (readl(ps2if->base) & 0xffff0000)
+		/* empty */;
+
+	writel(1, ps2if->base + 4); /* enable rx irq */
+	return 0;
+}
+
+static void altera_ps2_close(struct serio *io)
+{
+	struct ps2if *ps2if = io->port_data;
+
+	writel(0, ps2if->base + 4); /* disable rx irq */
+}
+
+/*
+ * Add one device to this driver.
+ */
+static int altera_ps2_probe(struct platform_device *pdev)
+{
+	struct ps2if *ps2if;
+	struct serio *serio;
+	int error, irq;
+
+	ps2if = devm_kzalloc(&pdev->dev, sizeof(*ps2if), GFP_KERNEL);
+	if (!ps2if)
+		return -ENOMEM;
+
+	ps2if->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(ps2if->base))
+		return PTR_ERR(ps2if->base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	error = devm_request_irq(&pdev->dev, irq, altera_ps2_rxint, 0,
+				 pdev->name, ps2if);
+	if (error) {
+		dev_err(&pdev->dev, "could not request IRQ %d\n", irq);
+		return error;
+	}
+
+	serio = kzalloc_obj(*serio);
+	if (!serio)
+		return -ENOMEM;
+
+	serio->id.type		= SERIO_8042;
+	serio->write		= altera_ps2_write;
+	serio->open		= altera_ps2_open;
+	serio->close		= altera_ps2_close;
+	strscpy(serio->name, dev_name(&pdev->dev), sizeof(serio->name));
+	strscpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+	serio->port_data	= ps2if;
+	serio->dev.parent	= &pdev->dev;
+	ps2if->io		= serio;
+
+	dev_info(&pdev->dev, "base %p, irq %d\n", ps2if->base, irq);
+
+	serio_register_port(ps2if->io);
+	platform_set_drvdata(pdev, ps2if);
+
+	return 0;
+}
+
+/*
+ * Remove one device from this driver.
+ */
+static void altera_ps2_remove(struct platform_device *pdev)
+{
+	struct ps2if *ps2if = platform_get_drvdata(pdev);
+
+	serio_unregister_port(ps2if->io);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id altera_ps2_match[] = {
+	{ .compatible = "ALTR,ps2-1.0", },
+	{ .compatible = "altr,ps2-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altera_ps2_match);
+#endif /* CONFIG_OF */
+
+/*
+ * Our device driver structure
+ */
+static struct platform_driver altera_ps2_driver = {
+	.probe		= altera_ps2_probe,
+	.remove		= altera_ps2_remove,
+	.driver	= {
+		.name	= DRV_NAME,
+		.of_match_table = of_match_ptr(altera_ps2_match),
+	},
+};
+module_platform_driver(altera_ps2_driver);
+
+MODULE_DESCRIPTION("Altera University Program PS2 controller driver");
+MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
new file mode 100644
index 000000000..046b8f388
--- /dev/null
+++ b/drivers/input/serio/ambakmi.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  linux/drivers/input/serio/ambakmi.c
+ *
+ *  Copyright (C) 2000-2003 Deep Blue Solutions Ltd.
+ *  Copyright (C) 2002 Russell King.
+ */
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define KMI_BASE	(kmi->base)
+
+struct amba_kmi_port {
+	struct serio		*io;
+	struct clk		*clk;
+	void __iomem		*base;
+	unsigned int		irq;
+	unsigned int		divisor;
+	unsigned int		open;
+};
+
+static irqreturn_t amba_kmi_int(int irq, void *dev_id)
+{
+	struct amba_kmi_port *kmi = dev_id;
+	unsigned int status = readb(KMIIR);
+	int handled = IRQ_NONE;
+
+	while (status & KMIIR_RXINTR) {
+		serio_interrupt(kmi->io, readb(KMIDATA), 0);
+		status = readb(KMIIR);
+		handled = IRQ_HANDLED;
+	}
+
+	return handled;
+}
+
+static int amba_kmi_write(struct serio *io, unsigned char val)
+{
+	struct amba_kmi_port *kmi = io->port_data;
+	unsigned int timeleft = 10000; /* timeout in 100ms */
+
+	while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && --timeleft)
+		udelay(10);
+
+	if (timeleft)
+		writeb(val, KMIDATA);
+
+	return timeleft ? 0 : SERIO_TIMEOUT;
+}
+
+static int amba_kmi_open(struct serio *io)
+{
+	struct amba_kmi_port *kmi = io->port_data;
+	unsigned int divisor;
+	int ret;
+
+	ret = clk_prepare_enable(kmi->clk);
+	if (ret)
+		goto out;
+
+	divisor = clk_get_rate(kmi->clk) / 8000000 - 1;
+	writeb(divisor, KMICLKDIV);
+	writeb(KMICR_EN, KMICR);
+
+	ret = request_irq(kmi->irq, amba_kmi_int, IRQF_SHARED, "kmi-pl050",
+			  kmi);
+	if (ret) {
+		printk(KERN_ERR "kmi: failed to claim IRQ%d\n", kmi->irq);
+		writeb(0, KMICR);
+		goto clk_disable;
+	}
+
+	writeb(KMICR_EN | KMICR_RXINTREN, KMICR);
+
+	return 0;
+
+ clk_disable:
+	clk_disable_unprepare(kmi->clk);
+ out:
+	return ret;
+}
+
+static void amba_kmi_close(struct serio *io)
+{
+	struct amba_kmi_port *kmi = io->port_data;
+
+	writeb(0, KMICR);
+
+	free_irq(kmi->irq, kmi);
+	clk_disable_unprepare(kmi->clk);
+}
+
+static int amba_kmi_probe(struct amba_device *dev,
+	const struct amba_id *id)
+{
+	struct amba_kmi_port *kmi;
+	struct serio *io;
+	int ret;
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret)
+		return ret;
+
+	kmi = kzalloc_obj(*kmi);
+	io = kzalloc_obj(*io);
+	if (!kmi || !io) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+
+	io->id.type	= SERIO_8042;
+	io->write	= amba_kmi_write;
+	io->open	= amba_kmi_open;
+	io->close	= amba_kmi_close;
+	strscpy(io->name, dev_name(&dev->dev), sizeof(io->name));
+	strscpy(io->phys, dev_name(&dev->dev), sizeof(io->phys));
+	io->port_data	= kmi;
+	io->dev.parent	= &dev->dev;
+
+	kmi->io		= io;
+	kmi->base	= ioremap(dev->res.start, resource_size(&dev->res));
+	if (!kmi->base) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	kmi->clk = clk_get(&dev->dev, "KMIREFCLK");
+	if (IS_ERR(kmi->clk)) {
+		ret = PTR_ERR(kmi->clk);
+		goto unmap;
+	}
+
+	kmi->irq = dev->irq[0];
+	amba_set_drvdata(dev, kmi);
+
+	serio_register_port(kmi->io);
+	return 0;
+
+ unmap:
+	iounmap(kmi->base);
+ out:
+	kfree(kmi);
+	kfree(io);
+	amba_release_regions(dev);
+	return ret;
+}
+
+static void amba_kmi_remove(struct amba_device *dev)
+{
+	struct amba_kmi_port *kmi = amba_get_drvdata(dev);
+
+	serio_unregister_port(kmi->io);
+	clk_put(kmi->clk);
+	iounmap(kmi->base);
+	kfree(kmi);
+	amba_release_regions(dev);
+}
+
+static int amba_kmi_resume(struct device *dev)
+{
+	struct amba_kmi_port *kmi = dev_get_drvdata(dev);
+
+	/* kick the serio layer to rescan this port */
+	serio_reconnect(kmi->io);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(amba_kmi_dev_pm_ops, NULL, amba_kmi_resume);
+
+static const struct amba_id amba_kmi_idtable[] = {
+	{
+		.id	= 0x00041050,
+		.mask	= 0x000fffff,
+	},
+	{ 0, 0 }
+};
+
+MODULE_DEVICE_TABLE(amba, amba_kmi_idtable);
+
+static struct amba_driver ambakmi_driver = {
+	.drv		= {
+		.name	= "kmi-pl050",
+		.pm	= pm_sleep_ptr(&amba_kmi_dev_pm_ops),
+	},
+	.id_table	= amba_kmi_idtable,
+	.probe		= amba_kmi_probe,
+	.remove		= amba_kmi_remove,
+};
+
+module_amba_driver(ambakmi_driver);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("AMBA KMI controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
new file mode 100644
index 000000000..e346bf53e
--- /dev/null
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Amstrad E3 (Delta) keyboard port driver
+ *
+ *  Copyright (c) 2006 Matt Callow
+ *  Copyright (c) 2010 Janusz Krzysztofik
+ *
+ * Thanks to Cliff Lawson for his help
+ *
+ * The Amstrad Delta keyboard (aka mailboard) uses normal PC-AT style serial
+ * transmission.  The keyboard port is formed of two GPIO lines, for clock
+ * and data.  Due to strict timing requirements of the interface,
+ * the serial data stream is read and processed by a FIQ handler.
+ * The resulting words are fetched by this driver from a circular buffer.
+ *
+ * Standard AT keyboard driver (atkbd) is used for handling the keyboard data.
+ * However, when used with the E3 mailboard that producecs non-standard
+ * scancodes, a custom key table must be prepared and loaded from userspace.
+ */
+#include <linux/irq.h>
+#include <linux/platform_data/ams-delta-fiq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#define DRIVER_NAME	"ams-delta-serio"
+
+MODULE_AUTHOR("Matt Callow");
+MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver");
+MODULE_LICENSE("GPL");
+
+struct ams_delta_serio {
+	struct serio *serio;
+	struct regulator *vcc;
+	unsigned int *fiq_buffer;
+};
+
+static int check_data(struct serio *serio, int data)
+{
+	int i, parity = 0;
+
+	/* check valid stop bit */
+	if (!(data & 0x400)) {
+		dev_warn(&serio->dev, "invalid stop bit, data=0x%X\n", data);
+		return SERIO_FRAME;
+	}
+	/* calculate the parity */
+	for (i = 1; i < 10; i++) {
+		if (data & (1 << i))
+			parity++;
+	}
+	/* it should be odd */
+	if (!(parity & 0x01)) {
+		dev_warn(&serio->dev,
+			 "parity check failed, data=0x%X parity=0x%X\n", data,
+			 parity);
+		return SERIO_PARITY;
+	}
+	return 0;
+}
+
+static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
+{
+	struct ams_delta_serio *priv = dev_id;
+	int *circ_buff = &priv->fiq_buffer[FIQ_CIRC_BUFF];
+	int data, dfl;
+	u8 scancode;
+
+	priv->fiq_buffer[FIQ_IRQ_PEND] = 0;
+
+	/*
+	 * Read data from the circular buffer, check it
+	 * and then pass it on the serio
+	 */
+	while (priv->fiq_buffer[FIQ_KEYS_CNT] > 0) {
+
+		data = circ_buff[priv->fiq_buffer[FIQ_HEAD_OFFSET]++];
+		priv->fiq_buffer[FIQ_KEYS_CNT]--;
+		if (priv->fiq_buffer[FIQ_HEAD_OFFSET] ==
+		    priv->fiq_buffer[FIQ_BUF_LEN])
+			priv->fiq_buffer[FIQ_HEAD_OFFSET] = 0;
+
+		dfl = check_data(priv->serio, data);
+		scancode = (u8) (data >> 1) & 0xFF;
+		serio_interrupt(priv->serio, scancode, dfl);
+	}
+	return IRQ_HANDLED;
+}
+
+static int ams_delta_serio_open(struct serio *serio)
+{
+	struct ams_delta_serio *priv = serio->port_data;
+
+	/* enable keyboard */
+	return regulator_enable(priv->vcc);
+}
+
+static void ams_delta_serio_close(struct serio *serio)
+{
+	struct ams_delta_serio *priv = serio->port_data;
+
+	/* disable keyboard */
+	regulator_disable(priv->vcc);
+}
+
+static int ams_delta_serio_init(struct platform_device *pdev)
+{
+	struct ams_delta_serio *priv;
+	struct serio *serio;
+	int irq, err;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->fiq_buffer = pdev->dev.platform_data;
+	if (!priv->fiq_buffer)
+		return -EINVAL;
+
+	priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (IS_ERR(priv->vcc)) {
+		err = PTR_ERR(priv->vcc);
+		dev_err(&pdev->dev, "regulator request failed (%d)\n", err);
+		/*
+		 * When running on a non-dt platform and requested regulator
+		 * is not available, devm_regulator_get() never returns
+		 * -EPROBE_DEFER as it is not able to justify if the regulator
+		 * may still appear later.  On the other hand, the board can
+		 * still set full constriants flag at late_initcall in order
+		 * to instruct devm_regulator_get() to returnn a dummy one
+		 * if sufficient.  Hence, if we get -ENODEV here, let's convert
+		 * it to -EPROBE_DEFER and wait for the board to decide or
+		 * let Deferred Probe infrastructure handle this error.
+		 */
+		if (err == -ENODEV)
+			err = -EPROBE_DEFER;
+		return err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	err = devm_request_irq(&pdev->dev, irq, ams_delta_serio_interrupt,
+			       IRQ_TYPE_EDGE_RISING, DRIVER_NAME, priv);
+	if (err < 0) {
+		dev_err(&pdev->dev, "IRQ request failed (%d)\n", err);
+		return err;
+	}
+
+	serio = kzalloc_obj(*serio);
+	if (!serio)
+		return -ENOMEM;
+
+	priv->serio = serio;
+
+	serio->id.type = SERIO_8042;
+	serio->open = ams_delta_serio_open;
+	serio->close = ams_delta_serio_close;
+	strscpy(serio->name, "AMS DELTA keyboard adapter", sizeof(serio->name));
+	strscpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+	serio->dev.parent = &pdev->dev;
+	serio->port_data = priv;
+
+	serio_register_port(serio);
+
+	platform_set_drvdata(pdev, priv);
+
+	dev_info(&serio->dev, "%s\n", serio->name);
+
+	return 0;
+}
+
+static void ams_delta_serio_exit(struct platform_device *pdev)
+{
+	struct ams_delta_serio *priv = platform_get_drvdata(pdev);
+
+	serio_unregister_port(priv->serio);
+}
+
+static struct platform_driver ams_delta_serio_driver = {
+	.probe	= ams_delta_serio_init,
+	.remove	= ams_delta_serio_exit,
+	.driver	= {
+		.name	= DRIVER_NAME
+	},
+};
+module_platform_driver(ams_delta_serio_driver);
diff --git a/drivers/input/serio/apbps2.c b/drivers/input/serio/apbps2.c
new file mode 100644
index 000000000..5f21acdd4
--- /dev/null
+++ b/drivers/input/serio/apbps2.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Aeroflex Gaisler
+ *
+ * This driver supports the APBPS2 PS/2 core available in the GRLIB
+ * VHDL IP core library.
+ *
+ * Full documentation of the APBPS2 core can be found here:
+ * http://www.gaisler.com/products/grlib/grip.pdf
+ *
+ * See "Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt" for
+ * information on open firmware properties.
+ *
+ * Contributors: Daniel Hellstrom <daniel@gaisler.com>
+ */
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+struct apbps2_regs {
+	u32 __iomem data;	/* 0x00 */
+	u32 __iomem status;	/* 0x04 */
+	u32 __iomem ctrl;	/* 0x08 */
+	u32 __iomem reload;	/* 0x0c */
+};
+
+#define APBPS2_STATUS_DR	(1<<0)
+#define APBPS2_STATUS_PE	(1<<1)
+#define APBPS2_STATUS_FE	(1<<2)
+#define APBPS2_STATUS_KI	(1<<3)
+#define APBPS2_STATUS_RF	(1<<4)
+#define APBPS2_STATUS_TF	(1<<5)
+#define APBPS2_STATUS_TCNT	(0x1f<<22)
+#define APBPS2_STATUS_RCNT	(0x1f<<27)
+
+#define APBPS2_CTRL_RE		(1<<0)
+#define APBPS2_CTRL_TE		(1<<1)
+#define APBPS2_CTRL_RI		(1<<2)
+#define APBPS2_CTRL_TI		(1<<3)
+
+struct apbps2_priv {
+	struct serio		*io;
+	struct apbps2_regs	__iomem *regs;
+};
+
+static int apbps2_idx;
+
+static irqreturn_t apbps2_isr(int irq, void *dev_id)
+{
+	struct apbps2_priv *priv = dev_id;
+	unsigned long status, data, rxflags;
+	irqreturn_t ret = IRQ_NONE;
+
+	while ((status = ioread32be(&priv->regs->status)) & APBPS2_STATUS_DR) {
+		data = ioread32be(&priv->regs->data);
+		rxflags = (status & APBPS2_STATUS_PE) ? SERIO_PARITY : 0;
+		rxflags |= (status & APBPS2_STATUS_FE) ? SERIO_FRAME : 0;
+
+		/* Clear error bits */
+		if (rxflags)
+			iowrite32be(0, &priv->regs->status);
+
+		serio_interrupt(priv->io, data, rxflags);
+
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int apbps2_write(struct serio *io, unsigned char val)
+{
+	struct apbps2_priv *priv = io->port_data;
+	unsigned int tleft = 10000; /* Timeout in 100ms */
+
+	/* Delay until PS/2 controller has room for more chars */
+	while ((ioread32be(&priv->regs->status) & APBPS2_STATUS_TF) && tleft--)
+		udelay(10);
+
+	if ((ioread32be(&priv->regs->status) & APBPS2_STATUS_TF) == 0) {
+		iowrite32be(val, &priv->regs->data);
+
+		iowrite32be(APBPS2_CTRL_RE | APBPS2_CTRL_RI | APBPS2_CTRL_TE,
+				&priv->regs->ctrl);
+		return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int apbps2_open(struct serio *io)
+{
+	struct apbps2_priv *priv = io->port_data;
+	int limit;
+
+	/* Clear error flags */
+	iowrite32be(0, &priv->regs->status);
+
+	/* Clear old data if available (unlikely) */
+	limit = 1024;
+	while ((ioread32be(&priv->regs->status) & APBPS2_STATUS_DR) && --limit)
+		ioread32be(&priv->regs->data);
+
+	/* Enable receiver and its interrupt */
+	iowrite32be(APBPS2_CTRL_RE | APBPS2_CTRL_RI, &priv->regs->ctrl);
+
+	return 0;
+}
+
+static void apbps2_close(struct serio *io)
+{
+	struct apbps2_priv *priv = io->port_data;
+
+	/* Stop interrupts at PS/2 HW level */
+	iowrite32be(0, &priv->regs->ctrl);
+}
+
+/* Initialize one APBPS2 PS/2 core */
+static int apbps2_of_probe(struct platform_device *ofdev)
+{
+	struct apbps2_priv *priv;
+	int irq, err;
+	u32 freq_hz;
+
+	priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&ofdev->dev, "memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	/* Find device address */
+	priv->regs = devm_platform_ioremap_resource(ofdev, 0);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	/* Reset hardware, disable interrupt */
+	iowrite32be(0, &priv->regs->ctrl);
+
+	/* IRQ */
+	irq = platform_get_irq(ofdev, 0);
+	if (irq < 0)
+		return irq;
+
+	err = devm_request_irq(&ofdev->dev, irq, apbps2_isr,
+				IRQF_SHARED, "apbps2", priv);
+	if (err) {
+		dev_err(&ofdev->dev, "request IRQ%d failed\n", irq);
+		return err;
+	}
+
+	/* Get core frequency */
+	if (of_property_read_u32(ofdev->dev.of_node, "freq", &freq_hz)) {
+		dev_err(&ofdev->dev, "unable to get core frequency\n");
+		return -EINVAL;
+	}
+
+	/* Set reload register to core freq in kHz/10 */
+	iowrite32be(freq_hz / 10000, &priv->regs->reload);
+
+	priv->io = kzalloc_obj(*priv->io);
+	if (!priv->io)
+		return -ENOMEM;
+
+	priv->io->id.type = SERIO_8042;
+	priv->io->open = apbps2_open;
+	priv->io->close = apbps2_close;
+	priv->io->write = apbps2_write;
+	priv->io->port_data = priv;
+	strscpy(priv->io->name, "APBPS2 PS/2", sizeof(priv->io->name));
+	snprintf(priv->io->phys, sizeof(priv->io->phys),
+		 "apbps2_%d", apbps2_idx++);
+
+	dev_info(&ofdev->dev, "irq = %d, base = 0x%p\n", irq, priv->regs);
+
+	serio_register_port(priv->io);
+
+	platform_set_drvdata(ofdev, priv);
+
+	return 0;
+}
+
+static void apbps2_of_remove(struct platform_device *of_dev)
+{
+	struct apbps2_priv *priv = platform_get_drvdata(of_dev);
+
+	serio_unregister_port(priv->io);
+}
+
+static const struct of_device_id apbps2_of_match[] = {
+	{ .name = "GAISLER_APBPS2", },
+	{ .name = "01_060", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, apbps2_of_match);
+
+static struct platform_driver apbps2_of_driver = {
+	.driver = {
+		.name = "grlib-apbps2",
+		.of_match_table = apbps2_of_match,
+	},
+	.probe = apbps2_of_probe,
+	.remove = apbps2_of_remove,
+};
+
+module_platform_driver(apbps2_of_driver);
+
+MODULE_AUTHOR("Aeroflex Gaisler AB.");
+MODULE_DESCRIPTION("GRLIB APBPS2 PS/2 serial I/O");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/serio/arc_ps2.c b/drivers/input/serio/arc_ps2.c
new file mode 100644
index 000000000..2eb069a0f
--- /dev/null
+++ b/drivers/input/serio/arc_ps2.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Driver is originally developed by Pavel Sokolov <psokolov@synopsys.com>
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#define ARC_PS2_PORTS                   2
+
+#define ARC_ARC_PS2_ID                  0x0001f609
+
+#define STAT_TIMEOUT                    128
+
+#define PS2_STAT_RX_FRM_ERR             (1)
+#define PS2_STAT_RX_BUF_OVER            (1 << 1)
+#define PS2_STAT_RX_INT_EN              (1 << 2)
+#define PS2_STAT_RX_VAL                 (1 << 3)
+#define PS2_STAT_TX_ISNOT_FUL           (1 << 4)
+#define PS2_STAT_TX_INT_EN              (1 << 5)
+
+struct arc_ps2_port {
+	void __iomem *data_addr;
+	void __iomem *status_addr;
+	struct serio *io;
+};
+
+struct arc_ps2_data {
+	struct arc_ps2_port port[ARC_PS2_PORTS];
+	void __iomem *addr;
+	unsigned int frame_error;
+	unsigned int buf_overflow;
+	unsigned int total_int;
+};
+
+static void arc_ps2_check_rx(struct arc_ps2_data *arc_ps2,
+			     struct arc_ps2_port *port)
+{
+	unsigned int timeout = 1000;
+	unsigned int flag, status;
+	unsigned char data;
+
+	do {
+		status = ioread32(port->status_addr);
+		if (!(status & PS2_STAT_RX_VAL))
+			return;
+
+		data = ioread32(port->data_addr) & 0xff;
+
+		flag = 0;
+		arc_ps2->total_int++;
+		if (status & PS2_STAT_RX_FRM_ERR) {
+			arc_ps2->frame_error++;
+			flag |= SERIO_PARITY;
+		} else if (status & PS2_STAT_RX_BUF_OVER) {
+			arc_ps2->buf_overflow++;
+			flag |= SERIO_FRAME;
+		}
+
+		serio_interrupt(port->io, data, flag);
+	} while (--timeout);
+
+	dev_err(&port->io->dev, "PS/2 hardware stuck\n");
+}
+
+static irqreturn_t arc_ps2_interrupt(int irq, void *dev)
+{
+	struct arc_ps2_data *arc_ps2 = dev;
+	int i;
+
+	for (i = 0; i < ARC_PS2_PORTS; i++)
+		arc_ps2_check_rx(arc_ps2, &arc_ps2->port[i]);
+
+	return IRQ_HANDLED;
+}
+
+static int arc_ps2_write(struct serio *io, unsigned char val)
+{
+	unsigned status;
+	struct arc_ps2_port *port = io->port_data;
+	int timeout = STAT_TIMEOUT;
+
+	do {
+		status = ioread32(port->status_addr);
+		cpu_relax();
+
+		if (status & PS2_STAT_TX_ISNOT_FUL) {
+			iowrite32(val & 0xff, port->data_addr);
+			return 0;
+		}
+
+	} while (--timeout);
+
+	dev_err(&io->dev, "write timeout\n");
+	return -ETIMEDOUT;
+}
+
+static int arc_ps2_open(struct serio *io)
+{
+	struct arc_ps2_port *port = io->port_data;
+
+	iowrite32(PS2_STAT_RX_INT_EN, port->status_addr);
+
+	return 0;
+}
+
+static void arc_ps2_close(struct serio *io)
+{
+	struct arc_ps2_port *port = io->port_data;
+
+	iowrite32(ioread32(port->status_addr) & ~PS2_STAT_RX_INT_EN,
+		  port->status_addr);
+}
+
+static void __iomem *arc_ps2_calc_addr(struct arc_ps2_data *arc_ps2,
+						  int index, bool status)
+{
+	void __iomem *addr;
+
+	addr = arc_ps2->addr + 4 + 4 * index;
+	if (status)
+		addr += ARC_PS2_PORTS * 4;
+
+	return addr;
+}
+
+static void arc_ps2_inhibit_ports(struct arc_ps2_data *arc_ps2)
+{
+	void __iomem *addr;
+	u32 val;
+	int i;
+
+	for (i = 0; i < ARC_PS2_PORTS; i++) {
+		addr = arc_ps2_calc_addr(arc_ps2, i, true);
+		val = ioread32(addr);
+		val &= ~(PS2_STAT_RX_INT_EN | PS2_STAT_TX_INT_EN);
+		iowrite32(val, addr);
+	}
+}
+
+static int arc_ps2_create_port(struct platform_device *pdev,
+					 struct arc_ps2_data *arc_ps2,
+					 int index)
+{
+	struct arc_ps2_port *port = &arc_ps2->port[index];
+	struct serio *io;
+
+	io = kzalloc_obj(*io);
+	if (!io)
+		return -ENOMEM;
+
+	io->id.type = SERIO_8042;
+	io->write = arc_ps2_write;
+	io->open = arc_ps2_open;
+	io->close = arc_ps2_close;
+	snprintf(io->name, sizeof(io->name), "ARC PS/2 port%d", index);
+	snprintf(io->phys, sizeof(io->phys), "arc/serio%d", index);
+	io->port_data = port;
+
+	port->io = io;
+
+	port->data_addr = arc_ps2_calc_addr(arc_ps2, index, false);
+	port->status_addr = arc_ps2_calc_addr(arc_ps2, index, true);
+
+	dev_dbg(&pdev->dev, "port%d is allocated (data = 0x%p, status = 0x%p)\n",
+		index, port->data_addr, port->status_addr);
+
+	serio_register_port(port->io);
+	return 0;
+}
+
+static int arc_ps2_probe(struct platform_device *pdev)
+{
+	struct arc_ps2_data *arc_ps2;
+	int irq;
+	int error, id, i;
+
+	irq = platform_get_irq_byname(pdev, "arc_ps2_irq");
+	if (irq < 0)
+		return -EINVAL;
+
+	arc_ps2 = devm_kzalloc(&pdev->dev, sizeof(*arc_ps2), GFP_KERNEL);
+	if (!arc_ps2) {
+		dev_err(&pdev->dev, "out of memory\n");
+		return -ENOMEM;
+	}
+
+	arc_ps2->addr = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(arc_ps2->addr))
+		return PTR_ERR(arc_ps2->addr);
+
+	dev_info(&pdev->dev, "irq = %d, address = 0x%p, ports = %i\n",
+		 irq, arc_ps2->addr, ARC_PS2_PORTS);
+
+	id = ioread32(arc_ps2->addr);
+	if (id != ARC_ARC_PS2_ID) {
+		dev_err(&pdev->dev, "device id does not match\n");
+		return -ENXIO;
+	}
+
+	arc_ps2_inhibit_ports(arc_ps2);
+
+	error = devm_request_irq(&pdev->dev, irq, arc_ps2_interrupt,
+				 0, "arc_ps2", arc_ps2);
+	if (error) {
+		dev_err(&pdev->dev, "Could not allocate IRQ\n");
+		return error;
+	}
+
+	for (i = 0; i < ARC_PS2_PORTS; i++) {
+		error = arc_ps2_create_port(pdev, arc_ps2, i);
+		if (error) {
+			while (--i >= 0)
+				serio_unregister_port(arc_ps2->port[i].io);
+			return error;
+		}
+	}
+
+	platform_set_drvdata(pdev, arc_ps2);
+
+	return 0;
+}
+
+static void arc_ps2_remove(struct platform_device *pdev)
+{
+	struct arc_ps2_data *arc_ps2 = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < ARC_PS2_PORTS; i++)
+		serio_unregister_port(arc_ps2->port[i].io);
+
+	dev_dbg(&pdev->dev, "interrupt count = %i\n", arc_ps2->total_int);
+	dev_dbg(&pdev->dev, "frame error count = %i\n", arc_ps2->frame_error);
+	dev_dbg(&pdev->dev, "buffer overflow count = %i\n",
+		arc_ps2->buf_overflow);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id arc_ps2_match[] = {
+	{ .compatible = "snps,arc_ps2" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, arc_ps2_match);
+#endif
+
+static struct platform_driver arc_ps2_driver = {
+	.driver	= {
+		.name		= "arc_ps2",
+		.of_match_table	= of_match_ptr(arc_ps2_match),
+	},
+	.probe	= arc_ps2_probe,
+	.remove	= arc_ps2_remove,
+};
+
+module_platform_driver(arc_ps2_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Pavel Sokolov <psokolov@synopsys.com>");
+MODULE_DESCRIPTION("ARC PS/2 Driver");
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
new file mode 100644
index 000000000..bf9b993f5
--- /dev/null
+++ b/drivers/input/serio/gscps2.c
@@ -0,0 +1,480 @@
+/*
+ * drivers/input/serio/gscps2.c
+ *
+ * Copyright (c) 2004-2006 Helge Deller <deller@gmx.de>
+ * Copyright (c) 2002 Laurent Canet <canetl@esiee.fr>
+ * Copyright (c) 2002 Thibaut Varene <varenet@parisc-linux.org>
+ *
+ * Pieces of code based on linux-2.4's hp_mouse.c & hp_keyb.c
+ *	Copyright (c) 1999 Alex deVries <alex@onefishtwo.ca>
+ *	Copyright (c) 1999-2000 Philipp Rumpf <prumpf@tux.org>
+ *	Copyright (c) 2000 Xavier Debacker <debackex@esiee.fr>
+ *	Copyright (c) 2000-2001 Thomas Marteau <marteaut@esiee.fr>
+ *
+ * HP GSC PS/2 port driver, found in PA/RISC Workstations
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * TODO:
+ * - Dino testing (did HP ever shipped a machine on which this port
+ *                 was usable/enabled ?)
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/serio.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/parisc-device.h>
+
+MODULE_AUTHOR("Laurent Canet <canetl@esiee.fr>, Thibaut Varene <varenet@parisc-linux.org>, Helge Deller <deller@gmx.de>");
+MODULE_DESCRIPTION("HP GSC PS2 port driver");
+MODULE_LICENSE("GPL");
+
+#define PFX "gscps2.c: "
+
+/*
+ * Driver constants
+ */
+
+/* various constants */
+#define ENABLE			1
+#define DISABLE			0
+
+#define GSC_DINO_OFFSET		0x0800	/* offset for DINO controller versus LASI one */
+
+/* PS/2 IO port offsets */
+#define GSC_ID			0x00	/* device ID offset (see: GSC_ID_XXX) */
+#define GSC_RESET		0x00	/* reset port offset */
+#define GSC_RCVDATA		0x04	/* receive port offset */
+#define GSC_XMTDATA		0x04	/* transmit port offset */
+#define GSC_CONTROL		0x08	/* see: Control register bits */
+#define GSC_STATUS		0x0C	/* see: Status register bits */
+
+/* Control register bits */
+#define GSC_CTRL_ENBL		0x01	/* enable interface */
+#define GSC_CTRL_LPBXR		0x02	/* loopback operation */
+#define GSC_CTRL_DIAG		0x20	/* directly control clock/data line */
+#define GSC_CTRL_DATDIR		0x40	/* data line direct control */
+#define GSC_CTRL_CLKDIR		0x80	/* clock line direct control */
+
+/* Status register bits */
+#define GSC_STAT_RBNE		0x01	/* Receive Buffer Not Empty */
+#define GSC_STAT_TBNE		0x02	/* Transmit Buffer Not Empty */
+#define GSC_STAT_TERR		0x04	/* Timeout Error */
+#define GSC_STAT_PERR		0x08	/* Parity Error */
+#define GSC_STAT_CMPINTR	0x10	/* Composite Interrupt = irq on any port */
+#define GSC_STAT_DATSHD		0x40	/* Data Line Shadow */
+#define GSC_STAT_CLKSHD		0x80	/* Clock Line Shadow */
+
+/* IDs returned by GSC_ID port register */
+#define GSC_ID_KEYBOARD		0	/* device ID values */
+#define GSC_ID_MOUSE		1
+
+
+static irqreturn_t gscps2_interrupt(int irq, void *dev);
+
+#define BUFFER_SIZE 0x0f
+
+/* GSC PS/2 port device struct */
+struct gscps2port {
+	struct list_head node;
+	struct parisc_device *padev;
+	struct serio *port;
+	spinlock_t lock;
+	char __iomem *addr;
+	u8 act, append; /* position in buffer[] */
+	struct {
+		u8 data;
+		u8 str;
+	} buffer[BUFFER_SIZE+1];
+	int id;
+};
+
+/*
+ * Various HW level routines
+ */
+
+#define gscps2_readb_input(x)		readb((x)+GSC_RCVDATA)
+#define gscps2_readb_control(x)		readb((x)+GSC_CONTROL)
+#define gscps2_readb_status(x)		readb((x)+GSC_STATUS)
+#define gscps2_writeb_control(x, y)	writeb((x), (y)+GSC_CONTROL)
+
+
+/*
+ * wait_TBE() - wait for Transmit Buffer Empty
+ */
+
+static int wait_TBE(char __iomem *addr)
+{
+	int timeout = 25000; /* device is expected to react within 250 msec */
+	while (gscps2_readb_status(addr) & GSC_STAT_TBNE) {
+		if (!--timeout)
+			return 0;	/* This should not happen */
+		udelay(10);
+	}
+	return 1;
+}
+
+
+/*
+ * gscps2_flush() - flush the receive buffer
+ */
+
+static void gscps2_flush(struct gscps2port *ps2port)
+{
+	while (gscps2_readb_status(ps2port->addr) & GSC_STAT_RBNE)
+		gscps2_readb_input(ps2port->addr);
+	ps2port->act = ps2port->append = 0;
+}
+
+/*
+ * gscps2_writeb_output() - write a byte to the port
+ *
+ * returns 1 on success, 0 on error
+ */
+
+static inline int gscps2_writeb_output(struct gscps2port *ps2port, u8 data)
+{
+	char __iomem *addr = ps2port->addr;
+
+	if (!wait_TBE(addr)) {
+		printk(KERN_DEBUG PFX "timeout - could not write byte %#x\n", data);
+		return 0;
+	}
+
+	while (gscps2_readb_status(addr) & GSC_STAT_RBNE)
+		/* wait */;
+
+	scoped_guard(spinlock_irqsave, &ps2port->lock)
+		writeb(data, addr+GSC_XMTDATA);
+
+	/* this is ugly, but due to timing of the port it seems to be necessary. */
+	mdelay(6);
+
+	/* make sure any received data is returned as fast as possible */
+	/* this is important e.g. when we set the LEDs on the keyboard */
+	gscps2_interrupt(0, NULL);
+
+	return 1;
+}
+
+
+/*
+ * gscps2_enable() - enables or disables the port
+ */
+
+static void gscps2_enable(struct gscps2port *ps2port, int enable)
+{
+	u8 data;
+
+	/* now enable/disable the port */
+	scoped_guard(spinlock_irqsave, &ps2port->lock) {
+		gscps2_flush(ps2port);
+		data = gscps2_readb_control(ps2port->addr);
+		if (enable)
+			data |= GSC_CTRL_ENBL;
+		else
+			data &= ~GSC_CTRL_ENBL;
+		gscps2_writeb_control(data, ps2port->addr);
+	}
+
+	wait_TBE(ps2port->addr);
+	gscps2_flush(ps2port);
+}
+
+/*
+ * gscps2_reset() - resets the PS/2 port
+ */
+
+static void gscps2_reset(struct gscps2port *ps2port)
+{
+	/* reset the interface */
+	guard(spinlock_irqsave)(&ps2port->lock);
+	gscps2_flush(ps2port);
+	writeb(0xff, ps2port->addr + GSC_RESET);
+	gscps2_flush(ps2port);
+}
+
+static LIST_HEAD(ps2port_list);
+
+static void gscps2_read_data(struct gscps2port *ps2port)
+{
+	u8 status;
+
+	do {
+		status = gscps2_readb_status(ps2port->addr);
+		if (!(status & GSC_STAT_RBNE))
+			break;
+
+		ps2port->buffer[ps2port->append].str = status;
+		ps2port->buffer[ps2port->append].data =
+				gscps2_readb_input(ps2port->addr);
+		ps2port->append = (ps2port->append + 1) & BUFFER_SIZE;
+	} while (true);
+}
+
+static bool gscps2_report_data(struct gscps2port *ps2port)
+{
+	unsigned int rxflags;
+	u8 data, status;
+
+	while (ps2port->act != ps2port->append) {
+		/*
+		 * Did new data arrived while we read existing data ?
+		 * If yes, exit now and let the new irq handler start
+		 * over again.
+		 */
+		if (gscps2_readb_status(ps2port->addr) & GSC_STAT_CMPINTR)
+			return true;
+
+		status = ps2port->buffer[ps2port->act].str;
+		data   = ps2port->buffer[ps2port->act].data;
+
+		ps2port->act = (ps2port->act + 1) & BUFFER_SIZE;
+		rxflags = ((status & GSC_STAT_TERR) ? SERIO_TIMEOUT : 0 ) |
+			  ((status & GSC_STAT_PERR) ? SERIO_PARITY  : 0 );
+
+		serio_interrupt(ps2port->port, data, rxflags);
+	}
+
+	return false;
+}
+
+/**
+ * gscps2_interrupt() - Interruption service routine
+ * @irq: interrupt number which triggered (unused)
+ * @dev: device pointer (unused)
+ *
+ * This function reads received PS/2 bytes and processes them on
+ * all interfaces.
+ * The problematic part here is, that the keyboard and mouse PS/2 port
+ * share the same interrupt and it's not possible to send data if any
+ * one of them holds input data. To solve this problem we try to receive
+ * the data as fast as possible and handle the reporting to the upper layer
+ * later.
+ */
+
+static irqreturn_t gscps2_interrupt(int irq, void *dev)
+{
+	struct gscps2port *ps2port;
+
+	list_for_each_entry(ps2port, &ps2port_list, node) {
+		guard(spinlock_irqsave)(&ps2port->lock);
+
+		gscps2_read_data(ps2port);
+	} /* list_for_each_entry */
+
+	/* all data was read from the ports - now report the data to upper layer */
+	list_for_each_entry(ps2port, &ps2port_list, node) {
+		if (gscps2_report_data(ps2port)) {
+			/* More data ready - break early to restart interrupt */
+			break;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * gscps2_write() - send a byte out through the aux interface.
+ */
+
+static int gscps2_write(struct serio *port, unsigned char data)
+{
+	struct gscps2port *ps2port = port->port_data;
+
+	if (!gscps2_writeb_output(ps2port, data)) {
+		printk(KERN_DEBUG PFX "sending byte %#x failed.\n", data);
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * gscps2_open() is called when a port is opened by the higher layer.
+ * It resets and enables the port.
+ */
+
+static int gscps2_open(struct serio *port)
+{
+	struct gscps2port *ps2port = port->port_data;
+
+	gscps2_reset(ps2port);
+
+	/* enable it */
+	gscps2_enable(ps2port, ENABLE);
+
+	gscps2_interrupt(0, NULL);
+
+	return 0;
+}
+
+/*
+ * gscps2_close() disables the port
+ */
+
+static void gscps2_close(struct serio *port)
+{
+	struct gscps2port *ps2port = port->port_data;
+	gscps2_enable(ps2port, DISABLE);
+}
+
+/**
+ * gscps2_probe() - Probes PS2 devices
+ * @dev: pointer to parisc_device struct which will be probed
+ *
+ * @return: success/error report
+ */
+
+static int __init gscps2_probe(struct parisc_device *dev)
+{
+	struct gscps2port *ps2port;
+	struct serio *serio;
+	unsigned long hpa = dev->hpa.start;
+	int ret;
+
+	if (!dev->irq)
+		return -ENODEV;
+
+	/* Offset for DINO PS/2. Works with LASI even */
+	if (dev->id.sversion == 0x96)
+		hpa += GSC_DINO_OFFSET;
+
+	ps2port = kzalloc_obj(*ps2port);
+	serio = kzalloc_obj(*serio);
+	if (!ps2port || !serio) {
+		ret = -ENOMEM;
+		goto fail_nomem;
+	}
+
+	dev_set_drvdata(&dev->dev, ps2port);
+
+	ps2port->port = serio;
+	ps2port->padev = dev;
+	ps2port->addr = ioremap(hpa, GSC_STATUS + 4);
+	if (!ps2port->addr) {
+		ret = -ENOMEM;
+		goto fail_nomem;
+	}
+	spin_lock_init(&ps2port->lock);
+
+	gscps2_reset(ps2port);
+	ps2port->id = readb(ps2port->addr + GSC_ID) & 0x0f;
+
+	snprintf(serio->name, sizeof(serio->name), "gsc-ps2-%s",
+		 (ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
+	strscpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
+	serio->id.type		= SERIO_8042;
+	serio->write		= gscps2_write;
+	serio->open		= gscps2_open;
+	serio->close		= gscps2_close;
+	serio->port_data	= ps2port;
+	serio->dev.parent	= &dev->dev;
+
+	ret = -EBUSY;
+	if (request_irq(dev->irq, gscps2_interrupt, IRQF_SHARED, ps2port->port->name, ps2port))
+		goto fail_miserably;
+
+	if (ps2port->id != GSC_ID_KEYBOARD && ps2port->id != GSC_ID_MOUSE) {
+		printk(KERN_WARNING PFX "Unsupported PS/2 port at 0x%08lx (id=%d) ignored\n",
+				hpa, ps2port->id);
+		ret = -ENODEV;
+		goto fail;
+	}
+
+#if 0
+	if (!request_mem_region(hpa, GSC_STATUS + 4, ps2port->port.name))
+		goto fail;
+#endif
+
+	pr_info("serio: %s port at 0x%08lx irq %d @ %s\n",
+		ps2port->port->name,
+		hpa,
+		ps2port->padev->irq,
+		ps2port->port->phys);
+
+	serio_register_port(ps2port->port);
+
+	list_add_tail(&ps2port->node, &ps2port_list);
+
+	return 0;
+
+fail:
+	free_irq(dev->irq, ps2port);
+
+fail_miserably:
+	iounmap(ps2port->addr);
+	release_mem_region(dev->hpa.start, GSC_STATUS + 4);
+
+fail_nomem:
+	kfree(ps2port);
+	kfree(serio);
+	return ret;
+}
+
+/**
+ * gscps2_remove() - Removes PS2 devices
+ * @dev: pointer to parisc_device which shall be removed
+ *
+ * @return: success/error report
+ */
+
+static void __exit gscps2_remove(struct parisc_device *dev)
+{
+	struct gscps2port *ps2port = dev_get_drvdata(&dev->dev);
+
+	serio_unregister_port(ps2port->port);
+	free_irq(dev->irq, ps2port);
+	gscps2_flush(ps2port);
+	list_del(&ps2port->node);
+	iounmap(ps2port->addr);
+#if 0
+	release_mem_region(dev->hpa, GSC_STATUS + 4);
+#endif
+	dev_set_drvdata(&dev->dev, NULL);
+	kfree(ps2port);
+}
+
+
+static const struct parisc_device_id gscps2_device_tbl[] __initconst = {
+	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00084 }, /* LASI PS/2 */
+#ifdef DINO_TESTED
+	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00096 }, /* DINO PS/2 */
+#endif
+	{ 0, }	/* 0 terminated list */
+};
+MODULE_DEVICE_TABLE(parisc, gscps2_device_tbl);
+
+static struct parisc_driver parisc_ps2_driver __refdata = {
+	.name		= "gsc_ps2",
+	.id_table	= gscps2_device_tbl,
+	.probe		= gscps2_probe,
+	.remove		= __exit_p(gscps2_remove),
+};
+
+static int __init gscps2_init(void)
+{
+	register_parisc_driver(&parisc_ps2_driver);
+	return 0;
+}
+
+static void __exit gscps2_exit(void)
+{
+	unregister_parisc_driver(&parisc_ps2_driver);
+}
+
+
+module_init(gscps2_init);
+module_exit(gscps2_exit);
+
diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
new file mode 100644
index 000000000..2680a816c
--- /dev/null
+++ b/drivers/input/serio/hil_mlc.c
@@ -0,0 +1,1026 @@
+/*
+ * HIL MLC state machine and serio interface driver
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ *
+ *
+ *	Driver theory of operation:
+ *
+ *	Some access methods and an ISR is defined by the sub-driver
+ *	(e.g. hp_sdc_mlc.c).  These methods are expected to provide a
+ *	few bits of logic in addition to raw access to the HIL MLC,
+ *	specifically, the ISR, which is entirely registered by the
+ *	sub-driver and invoked directly, must check for record
+ *	termination or packet match, at which point a semaphore must
+ *	be cleared and then the hil_mlcs_tasklet must be scheduled.
+ *
+ *	The hil_mlcs_tasklet processes the state machine for all MLCs
+ *	each time it runs, checking each MLC's progress at the current
+ *	node in the state machine, and moving the MLC to subsequent nodes
+ *	in the state machine when appropriate.  It will reschedule
+ *	itself if output is pending.  (This rescheduling should be replaced
+ *	at some point with a sub-driver-specific mechanism.)
+ *
+ *	A timer task prods the tasklet once per second to prevent
+ *	hangups when attached devices do not return expected data
+ *	and to initiate probes of the loop for new devices.
+ */
+
+#include <linux/hil_mlc.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+
+MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
+MODULE_DESCRIPTION("HIL MLC serio");
+MODULE_LICENSE("Dual BSD/GPL");
+
+EXPORT_SYMBOL(hil_mlc_register);
+EXPORT_SYMBOL(hil_mlc_unregister);
+
+#define PREFIX "HIL MLC: "
+
+static LIST_HEAD(hil_mlcs);
+static DEFINE_RWLOCK(hil_mlcs_lock);
+static struct timer_list	hil_mlcs_kicker;
+static int			hil_mlcs_probe, hil_mlc_stop;
+
+static void hil_mlcs_process(unsigned long unused);
+static DECLARE_TASKLET_DISABLED_OLD(hil_mlcs_tasklet, hil_mlcs_process);
+
+
+/* #define HIL_MLC_DEBUG */
+
+/********************** Device info/instance management **********************/
+
+static void hil_mlc_clear_di_map(hil_mlc *mlc, int val)
+{
+	int j;
+
+	for (j = val; j < 7 ; j++)
+		mlc->di_map[j] = -1;
+}
+
+static void hil_mlc_clear_di_scratch(hil_mlc *mlc)
+{
+	memset(&mlc->di_scratch, 0, sizeof(mlc->di_scratch));
+}
+
+static void hil_mlc_copy_di_scratch(hil_mlc *mlc, int idx)
+{
+	memcpy(&mlc->di[idx], &mlc->di_scratch, sizeof(mlc->di_scratch));
+}
+
+static int hil_mlc_match_di_scratch(hil_mlc *mlc)
+{
+	int idx;
+
+	for (idx = 0; idx < HIL_MLC_DEVMEM; idx++) {
+		int j, found = 0;
+
+		/* In-use slots are not eligible. */
+		for (j = 0; j < 7 ; j++)
+			if (mlc->di_map[j] == idx)
+				found++;
+
+		if (found)
+			continue;
+
+		if (!memcmp(mlc->di + idx, &mlc->di_scratch,
+				sizeof(mlc->di_scratch)))
+			break;
+	}
+	return idx >= HIL_MLC_DEVMEM ? -1 : idx;
+}
+
+static int hil_mlc_find_free_di(hil_mlc *mlc)
+{
+	int idx;
+
+	/* TODO: Pick all-zero slots first, failing that,
+	 * randomize the slot picked among those eligible.
+	 */
+	for (idx = 0; idx < HIL_MLC_DEVMEM; idx++) {
+		int j, found = 0;
+
+		for (j = 0; j < 7 ; j++)
+			if (mlc->di_map[j] == idx)
+				found++;
+
+		if (!found)
+			break;
+	}
+
+	return idx; /* Note: It is guaranteed at least one above will match */
+}
+
+static inline void hil_mlc_clean_serio_map(hil_mlc *mlc)
+{
+	int idx;
+
+	for (idx = 0; idx < HIL_MLC_DEVMEM; idx++) {
+		int j, found = 0;
+
+		for (j = 0; j < 7 ; j++)
+			if (mlc->di_map[j] == idx)
+				found++;
+
+		if (!found)
+			mlc->serio_map[idx].di_revmap = -1;
+	}
+}
+
+static void hil_mlc_send_polls(hil_mlc *mlc)
+{
+	int did, i, cnt;
+	struct serio *serio;
+	struct serio_driver *drv;
+
+	i = cnt = 0;
+	did = (mlc->ipacket[0] & HIL_PKT_ADDR_MASK) >> 8;
+	serio = did ? mlc->serio[mlc->di_map[did - 1]] : NULL;
+	drv = (serio != NULL) ? serio->drv : NULL;
+
+	while (mlc->icount < 15 - i) {
+		hil_packet p;
+
+		p = mlc->ipacket[i];
+		if (did != (p & HIL_PKT_ADDR_MASK) >> 8) {
+			if (drv && drv->interrupt) {
+				drv->interrupt(serio, 0, 0);
+				drv->interrupt(serio, HIL_ERR_INT >> 16, 0);
+				drv->interrupt(serio, HIL_PKT_CMD >> 8,  0);
+				drv->interrupt(serio, HIL_CMD_POL + cnt, 0);
+			}
+
+			did = (p & HIL_PKT_ADDR_MASK) >> 8;
+			serio = did ? mlc->serio[mlc->di_map[did-1]] : NULL;
+			drv = (serio != NULL) ? serio->drv : NULL;
+			cnt = 0;
+		}
+
+		cnt++;
+		i++;
+
+		if (drv && drv->interrupt) {
+			drv->interrupt(serio, (p >> 24), 0);
+			drv->interrupt(serio, (p >> 16) & 0xff, 0);
+			drv->interrupt(serio, (p >> 8) & ~HIL_PKT_ADDR_MASK, 0);
+			drv->interrupt(serio, p & 0xff, 0);
+		}
+	}
+}
+
+/*************************** State engine *********************************/
+
+#define HILSEN_SCHED	0x000100	/* Schedule the tasklet		*/
+#define HILSEN_BREAK	0x000200	/* Wait until next pass		*/
+#define HILSEN_UP	0x000400	/* relative node#, decrement	*/
+#define HILSEN_DOWN	0x000800	/* relative node#, increment	*/
+#define HILSEN_FOLLOW	0x001000	/* use retval as next node#	*/
+
+#define HILSEN_MASK	0x0000ff
+#define HILSEN_START	0
+#define HILSEN_RESTART	1
+#define HILSEN_DHR	9
+#define HILSEN_DHR2	10
+#define HILSEN_IFC	14
+#define HILSEN_HEAL0	16
+#define HILSEN_HEAL	18
+#define HILSEN_ACF      21
+#define HILSEN_ACF2	22
+#define HILSEN_DISC0	25
+#define HILSEN_DISC	27
+#define HILSEN_MATCH	40
+#define HILSEN_OPERATE	41
+#define HILSEN_PROBE	44
+#define HILSEN_DSR	52
+#define HILSEN_REPOLL	55
+#define HILSEN_IFCACF	58
+#define HILSEN_END	60
+
+#define HILSEN_NEXT	(HILSEN_DOWN | 1)
+#define HILSEN_SAME	(HILSEN_DOWN | 0)
+#define HILSEN_LAST	(HILSEN_UP | 1)
+
+#define HILSEN_DOZE	(HILSEN_SAME | HILSEN_SCHED | HILSEN_BREAK)
+#define HILSEN_SLEEP	(HILSEN_SAME | HILSEN_BREAK)
+
+static int hilse_match(hil_mlc *mlc, int unused)
+{
+	int rc;
+
+	rc = hil_mlc_match_di_scratch(mlc);
+	if (rc == -1) {
+		rc = hil_mlc_find_free_di(mlc);
+		if (rc == -1)
+			goto err;
+
+#ifdef HIL_MLC_DEBUG
+		printk(KERN_DEBUG PREFIX "new in slot %i\n", rc);
+#endif
+		hil_mlc_copy_di_scratch(mlc, rc);
+		mlc->di_map[mlc->ddi] = rc;
+		mlc->serio_map[rc].di_revmap = mlc->ddi;
+		hil_mlc_clean_serio_map(mlc);
+		serio_rescan(mlc->serio[rc]);
+		return -1;
+	}
+
+	mlc->di_map[mlc->ddi] = rc;
+#ifdef HIL_MLC_DEBUG
+	printk(KERN_DEBUG PREFIX "same in slot %i\n", rc);
+#endif
+	mlc->serio_map[rc].di_revmap = mlc->ddi;
+	hil_mlc_clean_serio_map(mlc);
+	return 0;
+
+ err:
+	printk(KERN_ERR PREFIX "Residual device slots exhausted, close some serios!\n");
+	return 1;
+}
+
+/* An LCV used to prevent runaway loops, forces 5 second sleep when reset. */
+static int hilse_init_lcv(hil_mlc *mlc, int unused)
+{
+	time64_t now = ktime_get_seconds();
+
+	if (mlc->lcv && (now - mlc->lcv_time) < 5)
+		return -1;
+
+	mlc->lcv_time = now;
+	mlc->lcv = 0;
+
+	return 0;
+}
+
+static int hilse_inc_lcv(hil_mlc *mlc, int lim)
+{
+	return mlc->lcv++ >= lim ? -1 : 0;
+}
+
+#if 0
+static int hilse_set_lcv(hil_mlc *mlc, int val)
+{
+	mlc->lcv = val;
+
+	return 0;
+}
+#endif
+
+/* Management of the discovered device index (zero based, -1 means no devs) */
+static int hilse_set_ddi(hil_mlc *mlc, int val)
+{
+	mlc->ddi = val;
+	hil_mlc_clear_di_map(mlc, val + 1);
+
+	return 0;
+}
+
+static int hilse_dec_ddi(hil_mlc *mlc, int unused)
+{
+	mlc->ddi--;
+	if (mlc->ddi <= -1) {
+		mlc->ddi = -1;
+		hil_mlc_clear_di_map(mlc, 0);
+		return -1;
+	}
+	hil_mlc_clear_di_map(mlc, mlc->ddi + 1);
+
+	return 0;
+}
+
+static int hilse_inc_ddi(hil_mlc *mlc, int unused)
+{
+	BUG_ON(mlc->ddi >= 6);
+	mlc->ddi++;
+
+	return 0;
+}
+
+static int hilse_take_idd(hil_mlc *mlc, int unused)
+{
+	int i;
+
+	/* Help the state engine:
+	 * Is this a real IDD response or just an echo?
+	 *
+	 * Real IDD response does not start with a command.
+	 */
+	if (mlc->ipacket[0] & HIL_PKT_CMD)
+		goto bail;
+
+	/* Should have the command echoed further down. */
+	for (i = 1; i < 16; i++) {
+		if (((mlc->ipacket[i] & HIL_PKT_ADDR_MASK) ==
+		     (mlc->ipacket[0] & HIL_PKT_ADDR_MASK)) &&
+		    (mlc->ipacket[i] & HIL_PKT_CMD) &&
+		    ((mlc->ipacket[i] & HIL_PKT_DATA_MASK) == HIL_CMD_IDD))
+			break;
+	}
+	if (i > 15)
+		goto bail;
+
+	/* And the rest of the packets should still be clear. */
+	while (++i < 16)
+		if (mlc->ipacket[i])
+			break;
+
+	if (i < 16)
+		goto bail;
+
+	for (i = 0; i < 16; i++)
+		mlc->di_scratch.idd[i] =
+			mlc->ipacket[i] & HIL_PKT_DATA_MASK;
+
+	/* Next step is to see if RSC supported */
+	if (mlc->di_scratch.idd[1] & HIL_IDD_HEADER_RSC)
+		return HILSEN_NEXT;
+
+	if (mlc->di_scratch.idd[1] & HIL_IDD_HEADER_EXD)
+		return HILSEN_DOWN | 4;
+
+	return 0;
+
+ bail:
+	mlc->ddi--;
+
+	return -1; /* This should send us off to ACF */
+}
+
+static int hilse_take_rsc(hil_mlc *mlc, int unused)
+{
+	int i;
+
+	for (i = 0; i < 16; i++)
+		mlc->di_scratch.rsc[i] =
+			mlc->ipacket[i] & HIL_PKT_DATA_MASK;
+
+	/* Next step is to see if EXD supported (IDD has already been read) */
+	if (mlc->di_scratch.idd[1] & HIL_IDD_HEADER_EXD)
+		return HILSEN_NEXT;
+
+	return 0;
+}
+
+static int hilse_take_exd(hil_mlc *mlc, int unused)
+{
+	int i;
+
+	for (i = 0; i < 16; i++)
+		mlc->di_scratch.exd[i] =
+			mlc->ipacket[i] & HIL_PKT_DATA_MASK;
+
+	/* Next step is to see if RNM supported. */
+	if (mlc->di_scratch.exd[0] & HIL_EXD_HEADER_RNM)
+		return HILSEN_NEXT;
+
+	return 0;
+}
+
+static int hilse_take_rnm(hil_mlc *mlc, int unused)
+{
+	int i;
+
+	for (i = 0; i < 16; i++)
+		mlc->di_scratch.rnm[i] =
+			mlc->ipacket[i] & HIL_PKT_DATA_MASK;
+
+	printk(KERN_INFO PREFIX "Device name gotten: %16s\n",
+			mlc->di_scratch.rnm);
+
+	return 0;
+}
+
+static int hilse_operate(hil_mlc *mlc, int repoll)
+{
+
+	if (mlc->opercnt == 0)
+		hil_mlcs_probe = 0;
+	mlc->opercnt = 1;
+
+	hil_mlc_send_polls(mlc);
+
+	if (!hil_mlcs_probe)
+		return 0;
+	hil_mlcs_probe = 0;
+	mlc->opercnt = 0;
+	return 1;
+}
+
+#define FUNC(funct, funct_arg, zero_rc, neg_rc, pos_rc) \
+{ HILSE_FUNC,		{ .func = funct }, funct_arg, zero_rc, neg_rc, pos_rc },
+#define OUT(pack) \
+{ HILSE_OUT,		{ .packet = pack }, 0, HILSEN_NEXT, HILSEN_DOZE, 0 },
+#define CTS \
+{ HILSE_CTS,		{ .packet = 0    }, 0, HILSEN_NEXT | HILSEN_SCHED | HILSEN_BREAK, HILSEN_DOZE, 0 },
+#define EXPECT(comp, to, got, got_wrong, timed_out) \
+{ HILSE_EXPECT,		{ .packet = comp }, to, got, got_wrong, timed_out },
+#define EXPECT_LAST(comp, to, got, got_wrong, timed_out) \
+{ HILSE_EXPECT_LAST,	{ .packet = comp }, to, got, got_wrong, timed_out },
+#define EXPECT_DISC(comp, to, got, got_wrong, timed_out) \
+{ HILSE_EXPECT_DISC,	{ .packet = comp }, to, got, got_wrong, timed_out },
+#define IN(to, got, got_error, timed_out) \
+{ HILSE_IN,		{ .packet = 0    }, to, got, got_error, timed_out },
+#define OUT_DISC(pack) \
+{ HILSE_OUT_DISC,	{ .packet = pack }, 0, 0, 0, 0 },
+#define OUT_LAST(pack) \
+{ HILSE_OUT_LAST,	{ .packet = pack }, 0, 0, 0, 0 },
+
+static const struct hilse_node hil_mlc_se[HILSEN_END] = {
+
+	/* 0  HILSEN_START */
+	FUNC(hilse_init_lcv, 0,	HILSEN_NEXT,	HILSEN_SLEEP,	0)
+
+	/* 1  HILSEN_RESTART */
+	FUNC(hilse_inc_lcv, 10,	HILSEN_NEXT,	HILSEN_START,  0)
+	OUT(HIL_CTRL_ONLY)			/* Disable APE */
+	CTS
+
+#define TEST_PACKET(x) \
+(HIL_PKT_CMD | (x << HIL_PKT_ADDR_SHIFT) | x << 4 | x)
+
+	OUT(HIL_DO_ALTER_CTRL | HIL_CTRL_TEST | TEST_PACKET(0x5))
+	EXPECT(HIL_ERR_INT | TEST_PACKET(0x5),
+	       2000,		HILSEN_NEXT,	HILSEN_RESTART,	HILSEN_RESTART)
+	OUT(HIL_DO_ALTER_CTRL | HIL_CTRL_TEST | TEST_PACKET(0xa))
+	EXPECT(HIL_ERR_INT | TEST_PACKET(0xa),
+	       2000,		HILSEN_NEXT,	HILSEN_RESTART,	HILSEN_RESTART)
+	OUT(HIL_CTRL_ONLY | 0)			/* Disable test mode */
+
+	/* 9  HILSEN_DHR */
+	FUNC(hilse_init_lcv, 0,	HILSEN_NEXT,	HILSEN_SLEEP,	0)
+
+	/* 10 HILSEN_DHR2 */
+	FUNC(hilse_inc_lcv, 10,	HILSEN_NEXT,	HILSEN_START,	0)
+	FUNC(hilse_set_ddi, -1,	HILSEN_NEXT,	0,		0)
+	OUT(HIL_PKT_CMD | HIL_CMD_DHR)
+	IN(300000,		HILSEN_DHR2,	HILSEN_DHR2,	HILSEN_NEXT)
+
+	/* 14 HILSEN_IFC */
+	OUT(HIL_PKT_CMD | HIL_CMD_IFC)
+	EXPECT(HIL_PKT_CMD | HIL_CMD_IFC | HIL_ERR_INT,
+	       20000,		HILSEN_DISC,	HILSEN_DHR2,	HILSEN_NEXT )
+
+	/* If devices are there, they weren't in PUP or other loopback mode.
+	 * We're more concerned at this point with restoring operation
+	 * to devices than discovering new ones, so we try to salvage
+	 * the loop configuration by closing off the loop.
+	 */
+
+	/* 16 HILSEN_HEAL0 */
+	FUNC(hilse_dec_ddi, 0,	HILSEN_NEXT,	HILSEN_ACF,	0)
+	FUNC(hilse_inc_ddi, 0,	HILSEN_NEXT,	0,		0)
+
+	/* 18 HILSEN_HEAL */
+	OUT_LAST(HIL_CMD_ELB)
+	EXPECT_LAST(HIL_CMD_ELB | HIL_ERR_INT,
+		    20000,	HILSEN_REPOLL,	HILSEN_DSR,	HILSEN_NEXT)
+	FUNC(hilse_dec_ddi, 0,	HILSEN_HEAL,	HILSEN_NEXT,	0)
+
+	/* 21 HILSEN_ACF */
+	FUNC(hilse_init_lcv, 0,	HILSEN_NEXT,	HILSEN_DOZE,	0)
+
+	/* 22 HILSEN_ACF2 */
+	FUNC(hilse_inc_lcv, 10,	HILSEN_NEXT,	HILSEN_START,	0)
+	OUT(HIL_PKT_CMD | HIL_CMD_ACF | 1)
+	IN(20000,		HILSEN_NEXT,	HILSEN_DSR,	HILSEN_NEXT)
+
+	/* 25 HILSEN_DISC0 */
+	OUT_DISC(HIL_PKT_CMD | HIL_CMD_ELB)
+	EXPECT_DISC(HIL_PKT_CMD | HIL_CMD_ELB | HIL_ERR_INT,
+	       20000,		HILSEN_NEXT,	HILSEN_DSR,	HILSEN_DSR)
+
+	/* Only enter here if response just received */
+	/* 27 HILSEN_DISC */
+	OUT_DISC(HIL_PKT_CMD | HIL_CMD_IDD)
+	EXPECT_DISC(HIL_PKT_CMD | HIL_CMD_IDD | HIL_ERR_INT,
+	       20000,		HILSEN_NEXT,	HILSEN_DSR,	HILSEN_START)
+	FUNC(hilse_inc_ddi,  0,	HILSEN_NEXT,	HILSEN_START,	0)
+	FUNC(hilse_take_idd, 0,	HILSEN_MATCH,	HILSEN_IFCACF,	HILSEN_FOLLOW)
+	OUT_LAST(HIL_PKT_CMD | HIL_CMD_RSC)
+	EXPECT_LAST(HIL_PKT_CMD | HIL_CMD_RSC | HIL_ERR_INT,
+	       30000,		HILSEN_NEXT,	HILSEN_DSR,	HILSEN_DSR)
+	FUNC(hilse_take_rsc, 0,	HILSEN_MATCH,	0,		HILSEN_FOLLOW)
+	OUT_LAST(HIL_PKT_CMD | HIL_CMD_EXD)
+	EXPECT_LAST(HIL_PKT_CMD | HIL_CMD_EXD | HIL_ERR_INT,
+	       30000,		HILSEN_NEXT,	HILSEN_DSR,	HILSEN_DSR)
+	FUNC(hilse_take_exd, 0,	HILSEN_MATCH,	0,		HILSEN_FOLLOW)
+	OUT_LAST(HIL_PKT_CMD | HIL_CMD_RNM)
+	EXPECT_LAST(HIL_PKT_CMD | HIL_CMD_RNM | HIL_ERR_INT,
+	       30000,		HILSEN_NEXT,	HILSEN_DSR,	HILSEN_DSR)
+	FUNC(hilse_take_rnm, 0, HILSEN_MATCH,	0,		0)
+
+	/* 40 HILSEN_MATCH */
+	FUNC(hilse_match, 0,	HILSEN_NEXT,	HILSEN_NEXT,	/* TODO */ 0)
+
+	/* 41 HILSEN_OPERATE */
+	OUT(HIL_PKT_CMD | HIL_CMD_POL)
+	EXPECT(HIL_PKT_CMD | HIL_CMD_POL | HIL_ERR_INT,
+	       20000,		HILSEN_NEXT,	HILSEN_DSR,	HILSEN_NEXT)
+	FUNC(hilse_operate, 0,	HILSEN_OPERATE,	HILSEN_IFC,	HILSEN_NEXT)
+
+	/* 44 HILSEN_PROBE */
+	OUT_LAST(HIL_PKT_CMD | HIL_CMD_EPT)
+	IN(10000,		HILSEN_DISC,	HILSEN_DSR,	HILSEN_NEXT)
+	OUT_DISC(HIL_PKT_CMD | HIL_CMD_ELB)
+	IN(10000,		HILSEN_DISC,	HILSEN_DSR,	HILSEN_NEXT)
+	OUT(HIL_PKT_CMD | HIL_CMD_ACF | 1)
+	IN(10000,		HILSEN_DISC0,	HILSEN_DSR,	HILSEN_NEXT)
+	OUT_LAST(HIL_PKT_CMD | HIL_CMD_ELB)
+	IN(10000,		HILSEN_OPERATE,	HILSEN_DSR,	HILSEN_DSR)
+
+	/* 52 HILSEN_DSR */
+	FUNC(hilse_set_ddi, -1,	HILSEN_NEXT,	0,		0)
+	OUT(HIL_PKT_CMD | HIL_CMD_DSR)
+	IN(20000,		HILSEN_DHR,	HILSEN_DHR,	HILSEN_IFC)
+
+	/* 55 HILSEN_REPOLL */
+	OUT(HIL_PKT_CMD | HIL_CMD_RPL)
+	EXPECT(HIL_PKT_CMD | HIL_CMD_RPL | HIL_ERR_INT,
+	       20000,		HILSEN_NEXT,	HILSEN_DSR,	HILSEN_NEXT)
+	FUNC(hilse_operate, 1,	HILSEN_OPERATE,	HILSEN_IFC,	HILSEN_PROBE)
+
+	/* 58 HILSEN_IFCACF */
+	OUT(HIL_PKT_CMD | HIL_CMD_IFC)
+	EXPECT(HIL_PKT_CMD | HIL_CMD_IFC | HIL_ERR_INT,
+	       20000,		HILSEN_ACF2,	HILSEN_DHR2,	HILSEN_HEAL)
+
+	/* 60 HILSEN_END */
+};
+
+static inline void hilse_setup_input(hil_mlc *mlc, const struct hilse_node *node)
+{
+
+	switch (node->act) {
+	case HILSE_EXPECT_DISC:
+		mlc->imatch = node->object.packet;
+		mlc->imatch |= ((mlc->ddi + 2) << HIL_PKT_ADDR_SHIFT);
+		break;
+	case HILSE_EXPECT_LAST:
+		mlc->imatch = node->object.packet;
+		mlc->imatch |= ((mlc->ddi + 1) << HIL_PKT_ADDR_SHIFT);
+		break;
+	case HILSE_EXPECT:
+		mlc->imatch = node->object.packet;
+		break;
+	case HILSE_IN:
+		mlc->imatch = 0;
+		break;
+	default:
+		BUG();
+	}
+	mlc->istarted = 1;
+	mlc->intimeout = usecs_to_jiffies(node->arg);
+	mlc->instart = jiffies;
+	mlc->icount = 15;
+	memset(mlc->ipacket, 0, 16 * sizeof(hil_packet));
+	BUG_ON(down_trylock(&mlc->isem));
+}
+
+#ifdef HIL_MLC_DEBUG
+static int doze;
+static int seidx; /* For debug */
+#endif
+
+static int hilse_donode(hil_mlc *mlc)
+{
+	const struct hilse_node *node;
+	int nextidx = 0;
+	int sched_long = 0;
+	unsigned long flags;
+
+#ifdef HIL_MLC_DEBUG
+	if (mlc->seidx && mlc->seidx != seidx &&
+	    mlc->seidx != 41 && mlc->seidx != 42 && mlc->seidx != 43) {
+		printk(KERN_DEBUG PREFIX "z%i \n {%i}", doze, mlc->seidx);
+		doze = 0;
+	}
+
+	seidx = mlc->seidx;
+#endif
+	node = hil_mlc_se + mlc->seidx;
+
+	switch (node->act) {
+		int rc;
+		hil_packet pack;
+
+	case HILSE_FUNC:
+		BUG_ON(node->object.func == NULL);
+		rc = node->object.func(mlc, node->arg);
+		nextidx = (rc > 0) ? node->ugly :
+			((rc < 0) ? node->bad : node->good);
+		if (nextidx == HILSEN_FOLLOW)
+			nextidx = rc;
+		break;
+
+	case HILSE_EXPECT_LAST:
+	case HILSE_EXPECT_DISC:
+	case HILSE_EXPECT:
+	case HILSE_IN:
+		/* Already set up from previous HILSE_OUT_* */
+		write_lock_irqsave(&mlc->lock, flags);
+		rc = mlc->in(mlc, node->arg);
+		if (rc == 2)  {
+			nextidx = HILSEN_DOZE;
+			sched_long = 1;
+			write_unlock_irqrestore(&mlc->lock, flags);
+			break;
+		}
+		if (rc == 1)
+			nextidx = node->ugly;
+		else if (rc == 0)
+			nextidx = node->good;
+		else
+			nextidx = node->bad;
+		mlc->istarted = 0;
+		write_unlock_irqrestore(&mlc->lock, flags);
+		break;
+
+	case HILSE_OUT_LAST:
+		write_lock_irqsave(&mlc->lock, flags);
+		pack = node->object.packet;
+		pack |= ((mlc->ddi + 1) << HIL_PKT_ADDR_SHIFT);
+		goto out;
+
+	case HILSE_OUT_DISC:
+		write_lock_irqsave(&mlc->lock, flags);
+		pack = node->object.packet;
+		pack |= ((mlc->ddi + 2) << HIL_PKT_ADDR_SHIFT);
+		goto out;
+
+	case HILSE_OUT:
+		write_lock_irqsave(&mlc->lock, flags);
+		pack = node->object.packet;
+	out:
+		if (!mlc->istarted) {
+			/* Prepare to receive input */
+			if ((node + 1)->act & HILSE_IN)
+				hilse_setup_input(mlc, node + 1);
+		}
+
+		write_unlock_irqrestore(&mlc->lock, flags);
+
+		if (down_trylock(&mlc->osem)) {
+			nextidx = HILSEN_DOZE;
+			break;
+		}
+		up(&mlc->osem);
+
+		write_lock_irqsave(&mlc->lock, flags);
+		if (!mlc->ostarted) {
+			mlc->ostarted = 1;
+			mlc->opacket = pack;
+			rc = mlc->out(mlc);
+			nextidx = HILSEN_DOZE;
+			write_unlock_irqrestore(&mlc->lock, flags);
+			if (rc) {
+				hil_mlc_stop = 1;
+				return 1;
+			}
+			break;
+		}
+		mlc->ostarted = 0;
+		mlc->instart = jiffies;
+		write_unlock_irqrestore(&mlc->lock, flags);
+		nextidx = HILSEN_NEXT;
+		break;
+
+	case HILSE_CTS:
+		write_lock_irqsave(&mlc->lock, flags);
+		rc = mlc->cts(mlc);
+		nextidx = rc ? node->bad : node->good;
+		write_unlock_irqrestore(&mlc->lock, flags);
+		if (rc) {
+			hil_mlc_stop = 1;
+			return 1;
+		}
+		break;
+
+	default:
+		BUG();
+	}
+
+#ifdef HIL_MLC_DEBUG
+	if (nextidx == HILSEN_DOZE)
+		doze++;
+#endif
+
+	while (nextidx & HILSEN_SCHED) {
+		unsigned long now = jiffies;
+
+		if (!sched_long)
+			goto sched;
+
+		if (time_after(now, mlc->instart + mlc->intimeout))
+			 goto sched;
+		mod_timer(&hil_mlcs_kicker, mlc->instart + mlc->intimeout);
+		break;
+	sched:
+		tasklet_schedule(&hil_mlcs_tasklet);
+		break;
+	}
+
+	if (nextidx & HILSEN_DOWN)
+		mlc->seidx += nextidx & HILSEN_MASK;
+	else if (nextidx & HILSEN_UP)
+		mlc->seidx -= nextidx & HILSEN_MASK;
+	else
+		mlc->seidx = nextidx & HILSEN_MASK;
+
+	if (nextidx & HILSEN_BREAK)
+		return 1;
+
+	return 0;
+}
+
+/******************** tasklet context functions **************************/
+static void hil_mlcs_process(unsigned long unused)
+{
+	struct list_head *tmp;
+
+	read_lock(&hil_mlcs_lock);
+	list_for_each(tmp, &hil_mlcs) {
+		struct hil_mlc *mlc = list_entry(tmp, hil_mlc, list);
+		while (hilse_donode(mlc) == 0) {
+#ifdef HIL_MLC_DEBUG
+			if (mlc->seidx != 41 &&
+			    mlc->seidx != 42 &&
+			    mlc->seidx != 43)
+				printk(KERN_DEBUG PREFIX " + ");
+#endif
+		}
+	}
+	read_unlock(&hil_mlcs_lock);
+}
+
+/************************* Keepalive timer task *********************/
+
+static void hil_mlcs_timer(struct timer_list *unused)
+{
+	if (hil_mlc_stop) {
+		/* could not send packet - stop immediately. */
+		pr_warn(PREFIX "HIL seems stuck - Disabling HIL MLC.\n");
+		return;
+	}
+
+	hil_mlcs_probe = 1;
+	tasklet_schedule(&hil_mlcs_tasklet);
+	/* Re-insert the periodic task. */
+	if (!timer_pending(&hil_mlcs_kicker))
+		mod_timer(&hil_mlcs_kicker, jiffies + HZ);
+}
+
+/******************** user/kernel context functions **********************/
+
+static int hil_mlc_serio_write(struct serio *serio, unsigned char c)
+{
+	struct hil_mlc_serio_map *map;
+	struct hil_mlc *mlc;
+	struct serio_driver *drv;
+	uint8_t *idx, *last;
+
+	map = serio->port_data;
+	BUG_ON(map == NULL);
+
+	mlc = map->mlc;
+	BUG_ON(mlc == NULL);
+
+	mlc->serio_opacket[map->didx] |=
+		((hil_packet)c) << (8 * (3 - mlc->serio_oidx[map->didx]));
+
+	if (mlc->serio_oidx[map->didx] >= 3) {
+		/* for now only commands */
+		if (!(mlc->serio_opacket[map->didx] & HIL_PKT_CMD))
+			return -EIO;
+		switch (mlc->serio_opacket[map->didx] & HIL_PKT_DATA_MASK) {
+		case HIL_CMD_IDD:
+			idx = mlc->di[map->didx].idd;
+			goto emu;
+		case HIL_CMD_RSC:
+			idx = mlc->di[map->didx].rsc;
+			goto emu;
+		case HIL_CMD_EXD:
+			idx = mlc->di[map->didx].exd;
+			goto emu;
+		case HIL_CMD_RNM:
+			idx = mlc->di[map->didx].rnm;
+			goto emu;
+		default:
+			break;
+		}
+		mlc->serio_oidx[map->didx] = 0;
+		mlc->serio_opacket[map->didx] = 0;
+	}
+
+	mlc->serio_oidx[map->didx]++;
+	return -EIO;
+ emu:
+	drv = serio->drv;
+	BUG_ON(drv == NULL);
+
+	last = idx + 15;
+	while ((last != idx) && (*last == 0))
+		last--;
+
+	while (idx != last) {
+		drv->interrupt(serio, 0, 0);
+		drv->interrupt(serio, HIL_ERR_INT >> 16, 0);
+		drv->interrupt(serio, 0, 0);
+		drv->interrupt(serio, *idx, 0);
+		idx++;
+	}
+	drv->interrupt(serio, 0, 0);
+	drv->interrupt(serio, HIL_ERR_INT >> 16, 0);
+	drv->interrupt(serio, HIL_PKT_CMD >> 8, 0);
+	drv->interrupt(serio, *idx, 0);
+
+	mlc->serio_oidx[map->didx] = 0;
+	mlc->serio_opacket[map->didx] = 0;
+
+	return 0;
+}
+
+static int hil_mlc_serio_open(struct serio *serio)
+{
+	struct hil_mlc_serio_map *map;
+	struct hil_mlc *mlc;
+
+	if (serio_get_drvdata(serio) != NULL)
+		return -EBUSY;
+
+	map = serio->port_data;
+	BUG_ON(map == NULL);
+
+	mlc = map->mlc;
+	BUG_ON(mlc == NULL);
+
+	return 0;
+}
+
+static void hil_mlc_serio_close(struct serio *serio)
+{
+	struct hil_mlc_serio_map *map;
+	struct hil_mlc *mlc;
+
+	map = serio->port_data;
+	BUG_ON(map == NULL);
+
+	mlc = map->mlc;
+	BUG_ON(mlc == NULL);
+
+	serio_set_drvdata(serio, NULL);
+	serio->drv = NULL;
+	/* TODO wake up interruptable */
+}
+
+static const struct serio_device_id hil_mlc_serio_id = {
+	.type = SERIO_HIL_MLC,
+	.proto = SERIO_HIL,
+	.extra = SERIO_ANY,
+	.id = SERIO_ANY,
+};
+
+int hil_mlc_register(hil_mlc *mlc)
+{
+	int i;
+	unsigned long flags;
+
+	BUG_ON(mlc == NULL);
+
+	mlc->istarted = 0;
+	mlc->ostarted = 0;
+
+	rwlock_init(&mlc->lock);
+	sema_init(&mlc->osem, 1);
+
+	sema_init(&mlc->isem, 1);
+	mlc->icount = -1;
+	mlc->imatch = 0;
+
+	mlc->opercnt = 0;
+
+	sema_init(&(mlc->csem), 0);
+
+	hil_mlc_clear_di_scratch(mlc);
+	hil_mlc_clear_di_map(mlc, 0);
+	for (i = 0; i < HIL_MLC_DEVMEM; i++) {
+		struct serio *mlc_serio;
+		hil_mlc_copy_di_scratch(mlc, i);
+		mlc_serio = kzalloc_obj(*mlc_serio);
+		mlc->serio[i] = mlc_serio;
+		if (!mlc->serio[i]) {
+			for (; i >= 0; i--)
+				kfree(mlc->serio[i]);
+			return -ENOMEM;
+		}
+		snprintf(mlc_serio->name, sizeof(mlc_serio->name)-1, "HIL_SERIO%d", i);
+		snprintf(mlc_serio->phys, sizeof(mlc_serio->phys)-1, "HIL%d", i);
+		mlc_serio->id			= hil_mlc_serio_id;
+		mlc_serio->id.id		= i; /* HIL port no. */
+		mlc_serio->write		= hil_mlc_serio_write;
+		mlc_serio->open			= hil_mlc_serio_open;
+		mlc_serio->close		= hil_mlc_serio_close;
+		mlc_serio->port_data		= &(mlc->serio_map[i]);
+		mlc->serio_map[i].mlc		= mlc;
+		mlc->serio_map[i].didx		= i;
+		mlc->serio_map[i].di_revmap	= -1;
+		mlc->serio_opacket[i]		= 0;
+		mlc->serio_oidx[i]		= 0;
+		serio_register_port(mlc_serio);
+	}
+
+	mlc->tasklet = &hil_mlcs_tasklet;
+
+	write_lock_irqsave(&hil_mlcs_lock, flags);
+	list_add_tail(&mlc->list, &hil_mlcs);
+	mlc->seidx = HILSEN_START;
+	write_unlock_irqrestore(&hil_mlcs_lock, flags);
+
+	tasklet_schedule(&hil_mlcs_tasklet);
+	return 0;
+}
+
+int hil_mlc_unregister(hil_mlc *mlc)
+{
+	struct list_head *tmp;
+	unsigned long flags;
+	int i;
+
+	BUG_ON(mlc == NULL);
+
+	write_lock_irqsave(&hil_mlcs_lock, flags);
+	list_for_each(tmp, &hil_mlcs)
+		if (list_entry(tmp, hil_mlc, list) == mlc)
+			goto found;
+
+	/* not found in list */
+	write_unlock_irqrestore(&hil_mlcs_lock, flags);
+	tasklet_schedule(&hil_mlcs_tasklet);
+	return -ENODEV;
+
+ found:
+	list_del(tmp);
+	write_unlock_irqrestore(&hil_mlcs_lock, flags);
+
+	for (i = 0; i < HIL_MLC_DEVMEM; i++) {
+		serio_unregister_port(mlc->serio[i]);
+		mlc->serio[i] = NULL;
+	}
+
+	tasklet_schedule(&hil_mlcs_tasklet);
+	return 0;
+}
+
+/**************************** Module interface *************************/
+
+static int __init hil_mlc_init(void)
+{
+	timer_setup(&hil_mlcs_kicker, &hil_mlcs_timer, 0);
+	mod_timer(&hil_mlcs_kicker, jiffies + HZ);
+
+	tasklet_enable(&hil_mlcs_tasklet);
+
+	return 0;
+}
+
+static void __exit hil_mlc_exit(void)
+{
+	timer_delete_sync(&hil_mlcs_kicker);
+	tasklet_kill(&hil_mlcs_tasklet);
+}
+
+module_init(hil_mlc_init);
+module_exit(hil_mlc_exit);
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
new file mode 100644
index 000000000..1461ef319
--- /dev/null
+++ b/drivers/input/serio/hp_sdc.c
@@ -0,0 +1,1128 @@
+/*
+ * HP i8042-based System Device Controller driver.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * System Device Controller Microprocessor Firmware Theory of Operation
+ *      for Part Number 1820-4784 Revision B.  Dwg No. A-1820-4784-2
+ * Helge Deller's original hilkbd.c port for PA-RISC.
+ *
+ *
+ * Driver theory of operation:
+ *
+ * hp_sdc_put does all writing to the SDC.  ISR can run on a different
+ * CPU than hp_sdc_put, but only one CPU runs hp_sdc_put at a time
+ * (it cannot really benefit from SMP anyway.)  A tasket fit this perfectly.
+ *
+ * All data coming back from the SDC is sent via interrupt and can be read
+ * fully in the ISR, so there are no latency/throughput problems there.
+ * The problem is with output, due to the slow clock speed of the SDC
+ * compared to the CPU.  This should not be too horrible most of the time,
+ * but if used with HIL devices that support the multibyte transfer command,
+ * keeping outbound throughput flowing at the 6500KBps that the HIL is
+ * capable of is more than can be done at HZ=100.
+ *
+ * Busy polling for IBF clear wastes CPU cycles and bus cycles.  hp_sdc.ibf
+ * is set to 0 when the IBF flag in the status register has cleared.  ISR
+ * may do this, and may also access the parts of queued transactions related
+ * to reading data back from the SDC, but otherwise will not touch the
+ * hp_sdc state. Whenever a register is written hp_sdc.ibf is set to 1.
+ *
+ * The i8042 write index and the values in the 4-byte input buffer
+ * starting at 0x70 are kept track of in hp_sdc.wi, and .r7[], respectively,
+ * to minimize the amount of IO needed to the SDC.  However these values
+ * do not need to be locked since they are only ever accessed by hp_sdc_put.
+ *
+ * A timer task schedules the tasklet once per second just to make
+ * sure it doesn't freeze up and to allow for bad reads to time out.
+ */
+
+#include <linux/hp_sdc.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/time.h>
+#include <linux/semaphore.h>
+#include <linux/slab.h>
+#include <linux/hil.h>
+#include <asm/io.h>
+
+/* Machine-specific abstraction */
+
+#if defined(__hppa__)
+# include <asm/parisc-device.h>
+# define sdc_readb(p)		gsc_readb(p)
+# define sdc_writeb(v,p)	gsc_writeb((v),(p))
+#elif defined(__mc68000__)
+#include <linux/uaccess.h>
+# define sdc_readb(p)		in_8(p)
+# define sdc_writeb(v,p)	out_8((p),(v))
+#else
+# error "HIL is not supported on this platform"
+#endif
+
+#define PREFIX "HP SDC: "
+
+MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
+MODULE_DESCRIPTION("HP i8042-based SDC Driver");
+MODULE_LICENSE("Dual BSD/GPL");
+
+EXPORT_SYMBOL(hp_sdc_request_timer_irq);
+EXPORT_SYMBOL(hp_sdc_request_hil_irq);
+EXPORT_SYMBOL(hp_sdc_request_cooked_irq);
+
+EXPORT_SYMBOL(hp_sdc_release_timer_irq);
+EXPORT_SYMBOL(hp_sdc_release_hil_irq);
+EXPORT_SYMBOL(hp_sdc_release_cooked_irq);
+
+EXPORT_SYMBOL(__hp_sdc_enqueue_transaction);
+EXPORT_SYMBOL(hp_sdc_enqueue_transaction);
+EXPORT_SYMBOL(hp_sdc_dequeue_transaction);
+
+static bool hp_sdc_disabled;
+module_param_named(no_hpsdc, hp_sdc_disabled, bool, 0);
+MODULE_PARM_DESC(no_hpsdc, "Do not enable HP SDC driver.");
+
+static hp_i8042_sdc	hp_sdc;	/* All driver state is kept in here. */
+
+/*************** primitives for use in any context *********************/
+static inline uint8_t hp_sdc_status_in8(void)
+{
+	uint8_t status;
+	unsigned long flags;
+
+	write_lock_irqsave(&hp_sdc.ibf_lock, flags);
+	status = sdc_readb(hp_sdc.status_io);
+	if (!(status & HP_SDC_STATUS_IBF))
+		hp_sdc.ibf = 0;
+	write_unlock_irqrestore(&hp_sdc.ibf_lock, flags);
+
+	return status;
+}
+
+static inline uint8_t hp_sdc_data_in8(void)
+{
+	return sdc_readb(hp_sdc.data_io);
+}
+
+static inline void hp_sdc_status_out8(uint8_t val)
+{
+	unsigned long flags;
+
+	write_lock_irqsave(&hp_sdc.ibf_lock, flags);
+	hp_sdc.ibf = 1;
+	if ((val & 0xf0) == 0xe0)
+		hp_sdc.wi = 0xff;
+	sdc_writeb(val, hp_sdc.status_io);
+	write_unlock_irqrestore(&hp_sdc.ibf_lock, flags);
+}
+
+static inline void hp_sdc_data_out8(uint8_t val)
+{
+	unsigned long flags;
+
+	write_lock_irqsave(&hp_sdc.ibf_lock, flags);
+	hp_sdc.ibf = 1;
+	sdc_writeb(val, hp_sdc.data_io);
+	write_unlock_irqrestore(&hp_sdc.ibf_lock, flags);
+}
+
+/*	Care must be taken to only invoke hp_sdc_spin_ibf when
+ *	absolutely needed, or in rarely invoked subroutines.
+ *	Not only does it waste CPU cycles, it also wastes bus cycles.
+ */
+static inline void hp_sdc_spin_ibf(void)
+{
+	unsigned long flags;
+	rwlock_t *lock;
+
+	lock = &hp_sdc.ibf_lock;
+
+	read_lock_irqsave(lock, flags);
+	if (!hp_sdc.ibf) {
+		read_unlock_irqrestore(lock, flags);
+		return;
+	}
+	read_unlock(lock);
+	write_lock(lock);
+	while (sdc_readb(hp_sdc.status_io) & HP_SDC_STATUS_IBF)
+		{ }
+	hp_sdc.ibf = 0;
+	write_unlock_irqrestore(lock, flags);
+}
+
+
+/************************ Interrupt context functions ************************/
+static void hp_sdc_take(int irq, void *dev_id, uint8_t status, uint8_t data)
+{
+	hp_sdc_transaction *curr;
+
+	read_lock(&hp_sdc.rtq_lock);
+	if (hp_sdc.rcurr < 0) {
+		read_unlock(&hp_sdc.rtq_lock);
+		return;
+	}
+	curr = hp_sdc.tq[hp_sdc.rcurr];
+	read_unlock(&hp_sdc.rtq_lock);
+
+	curr->seq[curr->idx++] = status;
+	curr->seq[curr->idx++] = data;
+	hp_sdc.rqty -= 2;
+	hp_sdc.rtime = ktime_get();
+
+	if (hp_sdc.rqty <= 0) {
+		/* All data has been gathered. */
+		if (curr->seq[curr->actidx] & HP_SDC_ACT_SEMAPHORE)
+			if (curr->act.semaphore)
+				up(curr->act.semaphore);
+
+		if (curr->seq[curr->actidx] & HP_SDC_ACT_CALLBACK)
+			if (curr->act.irqhook)
+				curr->act.irqhook(irq, dev_id, status, data);
+
+		curr->actidx = curr->idx;
+		curr->idx++;
+		/* Return control of this transaction */
+		write_lock(&hp_sdc.rtq_lock);
+		hp_sdc.rcurr = -1;
+		hp_sdc.rqty = 0;
+		write_unlock(&hp_sdc.rtq_lock);
+		tasklet_schedule(&hp_sdc.task);
+	}
+}
+
+static irqreturn_t hp_sdc_isr(int irq, void *dev_id)
+{
+	uint8_t status, data;
+
+	status = hp_sdc_status_in8();
+	/* Read data unconditionally to advance i8042. */
+	data =   hp_sdc_data_in8();
+
+	/* For now we are ignoring these until we get the SDC to behave. */
+	if (((status & 0xf1) == 0x51) && data == 0x82)
+		return IRQ_HANDLED;
+
+	switch (status & HP_SDC_STATUS_IRQMASK) {
+	case 0: /* This case is not documented. */
+		break;
+
+	case HP_SDC_STATUS_USERTIMER:
+	case HP_SDC_STATUS_PERIODIC:
+	case HP_SDC_STATUS_TIMER:
+		read_lock(&hp_sdc.hook_lock);
+		if (hp_sdc.timer != NULL)
+			hp_sdc.timer(irq, dev_id, status, data);
+		read_unlock(&hp_sdc.hook_lock);
+		break;
+
+	case HP_SDC_STATUS_REG:
+		hp_sdc_take(irq, dev_id, status, data);
+		break;
+
+	case HP_SDC_STATUS_HILCMD:
+	case HP_SDC_STATUS_HILDATA:
+		read_lock(&hp_sdc.hook_lock);
+		if (hp_sdc.hil != NULL)
+			hp_sdc.hil(irq, dev_id, status, data);
+		read_unlock(&hp_sdc.hook_lock);
+		break;
+
+	case HP_SDC_STATUS_PUP:
+		read_lock(&hp_sdc.hook_lock);
+		if (hp_sdc.pup != NULL)
+			hp_sdc.pup(irq, dev_id, status, data);
+		else
+			printk(KERN_INFO PREFIX "HP SDC reports successful PUP.\n");
+		read_unlock(&hp_sdc.hook_lock);
+		break;
+
+	default:
+		read_lock(&hp_sdc.hook_lock);
+		if (hp_sdc.cooked != NULL)
+			hp_sdc.cooked(irq, dev_id, status, data);
+		read_unlock(&hp_sdc.hook_lock);
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+
+static irqreturn_t hp_sdc_nmisr(int irq, void *dev_id)
+{
+	int status;
+
+	status = hp_sdc_status_in8();
+	printk(KERN_WARNING PREFIX "NMI !\n");
+
+#if 0
+	if (status & HP_SDC_NMISTATUS_FHS) {
+		read_lock(&hp_sdc.hook_lock);
+		if (hp_sdc.timer != NULL)
+			hp_sdc.timer(irq, dev_id, status, 0);
+		read_unlock(&hp_sdc.hook_lock);
+	} else {
+		/* TODO: pass this on to the HIL handler, or do SAK here? */
+		printk(KERN_WARNING PREFIX "HIL NMI\n");
+	}
+#endif
+
+	return IRQ_HANDLED;
+}
+
+
+/***************** Kernel (tasklet) context functions ****************/
+
+unsigned long hp_sdc_put(void);
+
+static void hp_sdc_tasklet(unsigned long foo)
+{
+	write_lock_irq(&hp_sdc.rtq_lock);
+
+	if (hp_sdc.rcurr >= 0) {
+		ktime_t now = ktime_get();
+
+		if (ktime_after(now, ktime_add_us(hp_sdc.rtime,
+						  HP_SDC_MAX_REG_DELAY))) {
+			hp_sdc_transaction *curr;
+			uint8_t tmp;
+
+			curr = hp_sdc.tq[hp_sdc.rcurr];
+			/* If this turns out to be a normal failure mode
+			 * we'll need to figure out a way to communicate
+			 * it back to the application. and be less verbose.
+			 */
+			printk(KERN_WARNING PREFIX "read timeout (%lldus)!\n",
+			       ktime_us_delta(now, hp_sdc.rtime));
+			curr->idx += hp_sdc.rqty;
+			hp_sdc.rqty = 0;
+			tmp = curr->seq[curr->actidx];
+			curr->seq[curr->actidx] |= HP_SDC_ACT_DEAD;
+			if (tmp & HP_SDC_ACT_SEMAPHORE)
+				if (curr->act.semaphore)
+					up(curr->act.semaphore);
+
+			if (tmp & HP_SDC_ACT_CALLBACK) {
+				/* Note this means that irqhooks may be called
+				 * in tasklet/bh context.
+				 */
+				if (curr->act.irqhook)
+					curr->act.irqhook(0, NULL, 0, 0);
+			}
+
+			curr->actidx = curr->idx;
+			curr->idx++;
+			hp_sdc.rcurr = -1;
+		}
+	}
+	write_unlock_irq(&hp_sdc.rtq_lock);
+	hp_sdc_put();
+}
+
+unsigned long hp_sdc_put(void)
+{
+	hp_sdc_transaction *curr;
+	uint8_t act;
+	int idx, curridx;
+
+	int limit = 0;
+
+	write_lock(&hp_sdc.lock);
+
+	/* If i8042 buffers are full, we cannot do anything that
+	   requires output, so we skip to the administrativa. */
+	if (hp_sdc.ibf) {
+		hp_sdc_status_in8();
+		if (hp_sdc.ibf)
+			goto finish;
+	}
+
+ anew:
+	/* See if we are in the middle of a sequence. */
+	if (hp_sdc.wcurr < 0)
+		hp_sdc.wcurr = 0;
+	read_lock_irq(&hp_sdc.rtq_lock);
+	if (hp_sdc.rcurr == hp_sdc.wcurr)
+		hp_sdc.wcurr++;
+	read_unlock_irq(&hp_sdc.rtq_lock);
+	if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+		hp_sdc.wcurr = 0;
+	curridx = hp_sdc.wcurr;
+
+	if (hp_sdc.tq[curridx] != NULL)
+		goto start;
+
+	while (++curridx != hp_sdc.wcurr) {
+		if (curridx >= HP_SDC_QUEUE_LEN) {
+			curridx = -1; /* Wrap to top */
+			continue;
+		}
+		read_lock_irq(&hp_sdc.rtq_lock);
+		if (hp_sdc.rcurr == curridx) {
+			read_unlock_irq(&hp_sdc.rtq_lock);
+			continue;
+		}
+		read_unlock_irq(&hp_sdc.rtq_lock);
+		if (hp_sdc.tq[curridx] != NULL)
+			break; /* Found one. */
+	}
+	if (curridx == hp_sdc.wcurr) { /* There's nothing queued to do. */
+		curridx = -1;
+	}
+	hp_sdc.wcurr = curridx;
+
+ start:
+
+	/* Check to see if the interrupt mask needs to be set. */
+	if (hp_sdc.set_im) {
+		hp_sdc_status_out8(hp_sdc.im | HP_SDC_CMD_SET_IM);
+		hp_sdc.set_im = 0;
+		goto finish;
+	}
+
+	if (hp_sdc.wcurr == -1)
+		goto done;
+
+	curr = hp_sdc.tq[curridx];
+	idx = curr->actidx;
+
+	if (curr->actidx >= curr->endidx) {
+		hp_sdc.tq[curridx] = NULL;
+		/* Interleave outbound data between the transactions. */
+		hp_sdc.wcurr++;
+		if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+			hp_sdc.wcurr = 0;
+		goto finish;
+	}
+
+	act = curr->seq[idx];
+	idx++;
+
+	if (curr->idx >= curr->endidx) {
+		if (act & HP_SDC_ACT_DEALLOC)
+			kfree(curr);
+		hp_sdc.tq[curridx] = NULL;
+		/* Interleave outbound data between the transactions. */
+		hp_sdc.wcurr++;
+		if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+			hp_sdc.wcurr = 0;
+		goto finish;
+	}
+
+	while (act & HP_SDC_ACT_PRECMD) {
+		if (curr->idx != idx) {
+			idx++;
+			act &= ~HP_SDC_ACT_PRECMD;
+			break;
+		}
+		hp_sdc_status_out8(curr->seq[idx]);
+		curr->idx++;
+		/* act finished? */
+		if ((act & HP_SDC_ACT_DURING) == HP_SDC_ACT_PRECMD)
+			goto actdone;
+		/* skip quantity field if data-out sequence follows. */
+		if (act & HP_SDC_ACT_DATAOUT)
+			curr->idx++;
+		goto finish;
+	}
+	if (act & HP_SDC_ACT_DATAOUT) {
+		int qty;
+
+		qty = curr->seq[idx];
+		idx++;
+		if (curr->idx - idx < qty) {
+			hp_sdc_data_out8(curr->seq[curr->idx]);
+			curr->idx++;
+			/* act finished? */
+			if (curr->idx - idx >= qty &&
+			    (act & HP_SDC_ACT_DURING) == HP_SDC_ACT_DATAOUT)
+				goto actdone;
+			goto finish;
+		}
+		idx += qty;
+		act &= ~HP_SDC_ACT_DATAOUT;
+	} else
+	    while (act & HP_SDC_ACT_DATAREG) {
+		int mask;
+		uint8_t w7[4];
+
+		mask = curr->seq[idx];
+		if (idx != curr->idx) {
+			idx++;
+			idx += !!(mask & 1);
+			idx += !!(mask & 2);
+			idx += !!(mask & 4);
+			idx += !!(mask & 8);
+			act &= ~HP_SDC_ACT_DATAREG;
+			break;
+		}
+
+		w7[0] = (mask & 1) ? curr->seq[++idx] : hp_sdc.r7[0];
+		w7[1] = (mask & 2) ? curr->seq[++idx] : hp_sdc.r7[1];
+		w7[2] = (mask & 4) ? curr->seq[++idx] : hp_sdc.r7[2];
+		w7[3] = (mask & 8) ? curr->seq[++idx] : hp_sdc.r7[3];
+
+		if (hp_sdc.wi > 0x73 || hp_sdc.wi < 0x70 ||
+		    w7[hp_sdc.wi - 0x70] == hp_sdc.r7[hp_sdc.wi - 0x70]) {
+			int i = 0;
+
+			/* Need to point the write index register */
+			while (i < 4 && w7[i] == hp_sdc.r7[i])
+				i++;
+
+			if (i < 4) {
+				hp_sdc_status_out8(HP_SDC_CMD_SET_D0 + i);
+				hp_sdc.wi = 0x70 + i;
+				goto finish;
+			}
+
+			idx++;
+			if ((act & HP_SDC_ACT_DURING) == HP_SDC_ACT_DATAREG)
+				goto actdone;
+
+			curr->idx = idx;
+			act &= ~HP_SDC_ACT_DATAREG;
+			break;
+		}
+
+		hp_sdc_data_out8(w7[hp_sdc.wi - 0x70]);
+		hp_sdc.r7[hp_sdc.wi - 0x70] = w7[hp_sdc.wi - 0x70];
+		hp_sdc.wi++; /* write index register autoincrements */
+		{
+			int i = 0;
+
+			while ((i < 4) && w7[i] == hp_sdc.r7[i])
+				i++;
+			if (i >= 4) {
+				curr->idx = idx + 1;
+				if ((act & HP_SDC_ACT_DURING) ==
+				    HP_SDC_ACT_DATAREG)
+					goto actdone;
+			}
+		}
+		goto finish;
+	}
+	/* We don't go any further in the command if there is a pending read,
+	   because we don't want interleaved results. */
+	read_lock_irq(&hp_sdc.rtq_lock);
+	if (hp_sdc.rcurr >= 0) {
+		read_unlock_irq(&hp_sdc.rtq_lock);
+		goto finish;
+	}
+	read_unlock_irq(&hp_sdc.rtq_lock);
+
+
+	if (act & HP_SDC_ACT_POSTCMD) {
+		uint8_t postcmd;
+
+		/* curr->idx should == idx at this point. */
+		postcmd = curr->seq[idx];
+		curr->idx++;
+		if (act & HP_SDC_ACT_DATAIN) {
+
+			/* Start a new read */
+			hp_sdc.rqty = curr->seq[curr->idx];
+			hp_sdc.rtime = ktime_get();
+			curr->idx++;
+			/* Still need to lock here in case of spurious irq. */
+			write_lock_irq(&hp_sdc.rtq_lock);
+			hp_sdc.rcurr = curridx;
+			write_unlock_irq(&hp_sdc.rtq_lock);
+			hp_sdc_status_out8(postcmd);
+			goto finish;
+		}
+		hp_sdc_status_out8(postcmd);
+		goto actdone;
+	}
+
+ actdone:
+	if (act & HP_SDC_ACT_SEMAPHORE)
+		up(curr->act.semaphore);
+	else if (act & HP_SDC_ACT_CALLBACK)
+		curr->act.irqhook(0,NULL,0,0);
+
+	if (curr->idx >= curr->endidx) { /* This transaction is over. */
+		if (act & HP_SDC_ACT_DEALLOC)
+			kfree(curr);
+		hp_sdc.tq[curridx] = NULL;
+	} else {
+		curr->actidx = idx + 1;
+		curr->idx = idx + 2;
+	}
+	/* Interleave outbound data between the transactions. */
+	hp_sdc.wcurr++;
+	if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+		hp_sdc.wcurr = 0;
+
+ finish:
+	/* If by some quirk IBF has cleared and our ISR has run to
+	   see that that has happened, do it all again. */
+	if (!hp_sdc.ibf && limit++ < 20)
+		goto anew;
+
+ done:
+	if (hp_sdc.wcurr >= 0)
+		tasklet_schedule(&hp_sdc.task);
+	write_unlock(&hp_sdc.lock);
+
+	return 0;
+}
+
+/******* Functions called in either user or kernel context ****/
+int __hp_sdc_enqueue_transaction(hp_sdc_transaction *this)
+{
+	int i;
+
+	if (this == NULL) {
+		BUG();
+		return -EINVAL;
+	}
+
+	/* Can't have same transaction on queue twice */
+	for (i = 0; i < HP_SDC_QUEUE_LEN; i++)
+		if (hp_sdc.tq[i] == this)
+			goto fail;
+
+	this->actidx = 0;
+	this->idx = 1;
+
+	/* Search for empty slot */
+	for (i = 0; i < HP_SDC_QUEUE_LEN; i++)
+		if (hp_sdc.tq[i] == NULL) {
+			hp_sdc.tq[i] = this;
+			tasklet_schedule(&hp_sdc.task);
+			return 0;
+		}
+
+	printk(KERN_WARNING PREFIX "No free slot to add transaction.\n");
+	return -EBUSY;
+
+ fail:
+	printk(KERN_WARNING PREFIX "Transaction add failed: transaction already queued?\n");
+	return -EINVAL;
+}
+
+int hp_sdc_enqueue_transaction(hp_sdc_transaction *this) {
+	unsigned long flags;
+	int ret;
+
+	write_lock_irqsave(&hp_sdc.lock, flags);
+	ret = __hp_sdc_enqueue_transaction(this);
+	write_unlock_irqrestore(&hp_sdc.lock,flags);
+
+	return ret;
+}
+
+int hp_sdc_dequeue_transaction(hp_sdc_transaction *this)
+{
+	unsigned long flags;
+	int i;
+
+	write_lock_irqsave(&hp_sdc.lock, flags);
+
+	/* TODO: don't remove it if it's not done. */
+
+	for (i = 0; i < HP_SDC_QUEUE_LEN; i++)
+		if (hp_sdc.tq[i] == this)
+			hp_sdc.tq[i] = NULL;
+
+	write_unlock_irqrestore(&hp_sdc.lock, flags);
+	return 0;
+}
+
+
+
+/********************** User context functions **************************/
+int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback)
+{
+	if (callback == NULL || hp_sdc.dev == NULL)
+		return -EINVAL;
+
+	write_lock_irq(&hp_sdc.hook_lock);
+	if (hp_sdc.timer != NULL) {
+		write_unlock_irq(&hp_sdc.hook_lock);
+		return -EBUSY;
+	}
+
+	hp_sdc.timer = callback;
+	/* Enable interrupts from the timers */
+	hp_sdc.im &= ~HP_SDC_IM_FH;
+        hp_sdc.im &= ~HP_SDC_IM_PT;
+	hp_sdc.im &= ~HP_SDC_IM_TIMERS;
+	hp_sdc.set_im = 1;
+	write_unlock_irq(&hp_sdc.hook_lock);
+
+	tasklet_schedule(&hp_sdc.task);
+
+	return 0;
+}
+
+int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback)
+{
+	if (callback == NULL || hp_sdc.dev == NULL)
+		return -EINVAL;
+
+	write_lock_irq(&hp_sdc.hook_lock);
+	if (hp_sdc.hil != NULL) {
+		write_unlock_irq(&hp_sdc.hook_lock);
+		return -EBUSY;
+	}
+
+	hp_sdc.hil = callback;
+	hp_sdc.im &= ~(HP_SDC_IM_HIL | HP_SDC_IM_RESET);
+	hp_sdc.set_im = 1;
+	write_unlock_irq(&hp_sdc.hook_lock);
+
+	tasklet_schedule(&hp_sdc.task);
+
+	return 0;
+}
+
+int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback)
+{
+	if (callback == NULL || hp_sdc.dev == NULL)
+		return -EINVAL;
+
+	write_lock_irq(&hp_sdc.hook_lock);
+	if (hp_sdc.cooked != NULL) {
+		write_unlock_irq(&hp_sdc.hook_lock);
+		return -EBUSY;
+	}
+
+	/* Enable interrupts from the HIL MLC */
+	hp_sdc.cooked = callback;
+	hp_sdc.im &= ~(HP_SDC_IM_HIL | HP_SDC_IM_RESET);
+	hp_sdc.set_im = 1;
+	write_unlock_irq(&hp_sdc.hook_lock);
+
+	tasklet_schedule(&hp_sdc.task);
+
+	return 0;
+}
+
+int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback)
+{
+	write_lock_irq(&hp_sdc.hook_lock);
+	if ((callback != hp_sdc.timer) ||
+	    (hp_sdc.timer == NULL)) {
+		write_unlock_irq(&hp_sdc.hook_lock);
+		return -EINVAL;
+	}
+
+	/* Disable interrupts from the timers */
+	hp_sdc.timer = NULL;
+	hp_sdc.im |= HP_SDC_IM_TIMERS;
+	hp_sdc.im |= HP_SDC_IM_FH;
+	hp_sdc.im |= HP_SDC_IM_PT;
+	hp_sdc.set_im = 1;
+	write_unlock_irq(&hp_sdc.hook_lock);
+	tasklet_schedule(&hp_sdc.task);
+
+	return 0;
+}
+
+int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback)
+{
+	write_lock_irq(&hp_sdc.hook_lock);
+	if ((callback != hp_sdc.hil) ||
+	    (hp_sdc.hil == NULL)) {
+		write_unlock_irq(&hp_sdc.hook_lock);
+		return -EINVAL;
+	}
+
+	hp_sdc.hil = NULL;
+	/* Disable interrupts from HIL only if there is no cooked driver. */
+	if(hp_sdc.cooked == NULL) {
+		hp_sdc.im |= (HP_SDC_IM_HIL | HP_SDC_IM_RESET);
+		hp_sdc.set_im = 1;
+	}
+	write_unlock_irq(&hp_sdc.hook_lock);
+	tasklet_schedule(&hp_sdc.task);
+
+	return 0;
+}
+
+int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback)
+{
+	write_lock_irq(&hp_sdc.hook_lock);
+	if ((callback != hp_sdc.cooked) ||
+	    (hp_sdc.cooked == NULL)) {
+		write_unlock_irq(&hp_sdc.hook_lock);
+		return -EINVAL;
+	}
+
+	hp_sdc.cooked = NULL;
+	/* Disable interrupts from HIL only if there is no raw HIL driver. */
+	if(hp_sdc.hil == NULL) {
+		hp_sdc.im |= (HP_SDC_IM_HIL | HP_SDC_IM_RESET);
+		hp_sdc.set_im = 1;
+	}
+	write_unlock_irq(&hp_sdc.hook_lock);
+	tasklet_schedule(&hp_sdc.task);
+
+	return 0;
+}
+
+/************************* Keepalive timer task *********************/
+
+static void hp_sdc_kicker(struct timer_list *unused)
+{
+	tasklet_schedule(&hp_sdc.task);
+	/* Re-insert the periodic task. */
+	mod_timer(&hp_sdc.kicker, jiffies + HZ);
+}
+
+/************************** Module Initialization ***************************/
+
+#if defined(__hppa__)
+
+static const struct parisc_device_id hp_sdc_tbl[] __initconst = {
+	{
+		.hw_type =	HPHW_FIO,
+		.hversion_rev =	HVERSION_REV_ANY_ID,
+		.hversion =	HVERSION_ANY_ID,
+		.sversion =	0x73,
+	 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl);
+
+static int __init hp_sdc_init_hppa(struct parisc_device *d);
+static struct delayed_work moduleloader_work;
+
+static struct parisc_driver hp_sdc_driver __refdata = {
+	.name =		"hp_sdc",
+	.id_table =	hp_sdc_tbl,
+	.probe =	hp_sdc_init_hppa,
+};
+
+#endif /* __hppa__ */
+
+static int __init hp_sdc_init(void)
+{
+	char *errstr;
+	hp_sdc_transaction t_sync;
+	uint8_t ts_sync[6];
+	struct semaphore s_sync;
+
+	rwlock_init(&hp_sdc.lock);
+	rwlock_init(&hp_sdc.ibf_lock);
+	rwlock_init(&hp_sdc.rtq_lock);
+	rwlock_init(&hp_sdc.hook_lock);
+
+	hp_sdc.timer		= NULL;
+	hp_sdc.hil		= NULL;
+	hp_sdc.pup		= NULL;
+	hp_sdc.cooked		= NULL;
+	hp_sdc.im		= HP_SDC_IM_MASK;  /* Mask maskable irqs */
+	hp_sdc.set_im		= 1;
+	hp_sdc.wi		= 0xff;
+	hp_sdc.r7[0]		= 0xff;
+	hp_sdc.r7[1]		= 0xff;
+	hp_sdc.r7[2]		= 0xff;
+	hp_sdc.r7[3]		= 0xff;
+	hp_sdc.ibf		= 1;
+
+	memset(&hp_sdc.tq, 0, sizeof(hp_sdc.tq));
+
+	hp_sdc.wcurr		= -1;
+        hp_sdc.rcurr		= -1;
+	hp_sdc.rqty		= 0;
+
+	hp_sdc.dev_err = -ENODEV;
+
+	errstr = "IO not found for";
+	if (!hp_sdc.base_io)
+		goto err0;
+
+	errstr = "IRQ not found for";
+	if (!hp_sdc.irq)
+		goto err0;
+
+	hp_sdc.dev_err = -EBUSY;
+
+#if defined(__hppa__)
+	errstr = "IO not available for";
+        if (request_region(hp_sdc.data_io, 2, hp_sdc_driver.name))
+		goto err0;
+#endif
+
+	errstr = "IRQ not available for";
+	if (request_irq(hp_sdc.irq, &hp_sdc_isr, IRQF_SHARED,
+			"HP SDC", &hp_sdc))
+		goto err1;
+
+	errstr = "NMI not available for";
+	if (request_irq(hp_sdc.nmi, &hp_sdc_nmisr, IRQF_SHARED,
+			"HP SDC NMI", &hp_sdc))
+		goto err2;
+
+	pr_info(PREFIX "HP SDC at 0x%08lx, IRQ %d (NMI IRQ %d)\n",
+	       hp_sdc.base_io, hp_sdc.irq, hp_sdc.nmi);
+
+	hp_sdc_status_in8();
+	hp_sdc_data_in8();
+
+	tasklet_init(&hp_sdc.task, hp_sdc_tasklet, 0);
+
+	/* Sync the output buffer registers, thus scheduling hp_sdc_tasklet. */
+	t_sync.actidx	= 0;
+	t_sync.idx	= 1;
+	t_sync.endidx	= 6;
+	t_sync.seq	= ts_sync;
+	ts_sync[0]	= HP_SDC_ACT_DATAREG | HP_SDC_ACT_SEMAPHORE;
+	ts_sync[1]	= 0x0f;
+	ts_sync[2] = ts_sync[3]	= ts_sync[4] = ts_sync[5] = 0;
+	t_sync.act.semaphore = &s_sync;
+	sema_init(&s_sync, 0);
+	hp_sdc_enqueue_transaction(&t_sync);
+	down(&s_sync); /* Wait for t_sync to complete */
+
+	/* Create the keepalive task */
+	timer_setup(&hp_sdc.kicker, hp_sdc_kicker, 0);
+	hp_sdc.kicker.expires = jiffies + HZ;
+	add_timer(&hp_sdc.kicker);
+
+	hp_sdc.dev_err = 0;
+	return 0;
+ err2:
+	free_irq(hp_sdc.irq, &hp_sdc);
+ err1:
+	release_region(hp_sdc.data_io, 2);
+ err0:
+	printk(KERN_WARNING PREFIX ": %s SDC IO=0x%p IRQ=0x%x NMI=0x%x\n",
+		errstr, (void *)hp_sdc.base_io, hp_sdc.irq, hp_sdc.nmi);
+	hp_sdc.dev = NULL;
+
+	return hp_sdc.dev_err;
+}
+
+#if defined(__hppa__)
+
+static void request_module_delayed(struct work_struct *work)
+{
+	request_module("hp_sdc_mlc");
+}
+
+static int __init hp_sdc_init_hppa(struct parisc_device *d)
+{
+	int ret;
+
+	if (!d)
+		return 1;
+	if (hp_sdc.dev != NULL)
+		return 1;	/* We only expect one SDC */
+
+	hp_sdc.dev		= d;
+	hp_sdc.irq		= d->irq;
+	hp_sdc.nmi		= d->aux_irq;
+	hp_sdc.base_io		= d->hpa.start;
+	hp_sdc.data_io		= d->hpa.start + 0x800;
+	hp_sdc.status_io	= d->hpa.start + 0x801;
+
+	INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
+
+	ret = hp_sdc_init();
+	/* after successful initialization give SDC some time to settle
+	 * and then load the hp_sdc_mlc upper layer driver */
+	if (!ret)
+		schedule_delayed_work(&moduleloader_work,
+			msecs_to_jiffies(2000));
+
+	return ret;
+}
+
+#endif /* __hppa__ */
+
+static void hp_sdc_exit(void)
+{
+	/* do nothing if we don't have a SDC */
+	if (!hp_sdc.dev)
+		return;
+
+	write_lock_irq(&hp_sdc.lock);
+
+	/* Turn off all maskable "sub-function" irq's. */
+	hp_sdc_spin_ibf();
+	sdc_writeb(HP_SDC_CMD_SET_IM | HP_SDC_IM_MASK, hp_sdc.status_io);
+
+	/* Wait until we know this has been processed by the i8042 */
+	hp_sdc_spin_ibf();
+
+	free_irq(hp_sdc.nmi, &hp_sdc);
+	free_irq(hp_sdc.irq, &hp_sdc);
+	write_unlock_irq(&hp_sdc.lock);
+
+	timer_delete_sync(&hp_sdc.kicker);
+
+	tasklet_kill(&hp_sdc.task);
+
+#if defined(__hppa__)
+	cancel_delayed_work_sync(&moduleloader_work);
+	if (unregister_parisc_driver(&hp_sdc_driver))
+		printk(KERN_WARNING PREFIX "Error unregistering HP SDC");
+#endif
+}
+
+static int __init hp_sdc_register(void)
+{
+	hp_sdc_transaction tq_init;
+	uint8_t tq_init_seq[5];
+	struct semaphore tq_init_sem;
+#if defined(__mc68000__)
+	unsigned char i;
+#endif
+
+	if (hp_sdc_disabled) {
+		printk(KERN_WARNING PREFIX "HP SDC driver disabled by no_hpsdc=1.\n");
+		return -ENODEV;
+	}
+
+	hp_sdc.dev = NULL;
+	hp_sdc.dev_err = 0;
+#if defined(__hppa__)
+	if (register_parisc_driver(&hp_sdc_driver)) {
+		printk(KERN_WARNING PREFIX "Error registering SDC with system bus tree.\n");
+		return -ENODEV;
+	}
+#elif defined(__mc68000__)
+	if (!MACH_IS_HP300)
+	    return -ENODEV;
+
+	hp_sdc.irq	 = 1;
+	hp_sdc.nmi	 = 7;
+	hp_sdc.base_io	 = (unsigned long) 0xf0428000;
+	hp_sdc.data_io	 = (unsigned long) hp_sdc.base_io + 1;
+	hp_sdc.status_io = (unsigned long) hp_sdc.base_io + 3;
+	if (!copy_from_kernel_nofault(&i, (unsigned char *)hp_sdc.data_io, 1))
+		hp_sdc.dev = (void *)1;
+	hp_sdc.dev_err   = hp_sdc_init();
+#endif
+	if (hp_sdc.dev == NULL) {
+		printk(KERN_WARNING PREFIX "No SDC found.\n");
+		return hp_sdc.dev_err;
+	}
+
+	sema_init(&tq_init_sem, 0);
+
+	tq_init.actidx		= 0;
+	tq_init.idx		= 1;
+	tq_init.endidx		= 5;
+	tq_init.seq		= tq_init_seq;
+	tq_init.act.semaphore	= &tq_init_sem;
+
+	tq_init_seq[0] =
+		HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN | HP_SDC_ACT_SEMAPHORE;
+	tq_init_seq[1] = HP_SDC_CMD_READ_KCC;
+	tq_init_seq[2] = 1;
+	tq_init_seq[3] = 0;
+	tq_init_seq[4] = 0;
+
+	hp_sdc_enqueue_transaction(&tq_init);
+
+	down(&tq_init_sem);
+	up(&tq_init_sem);
+
+	if ((tq_init_seq[0] & HP_SDC_ACT_DEAD) == HP_SDC_ACT_DEAD) {
+		printk(KERN_WARNING PREFIX "Error reading config byte.\n");
+		hp_sdc_exit();
+		return -ENODEV;
+	}
+	hp_sdc.r11 = tq_init_seq[4];
+	if (hp_sdc.r11 & HP_SDC_CFG_NEW) {
+		const char *str;
+		printk(KERN_INFO PREFIX "New style SDC\n");
+		tq_init_seq[1] = HP_SDC_CMD_READ_XTD;
+		tq_init.actidx		= 0;
+		tq_init.idx		= 1;
+		down(&tq_init_sem);
+		hp_sdc_enqueue_transaction(&tq_init);
+		down(&tq_init_sem);
+		up(&tq_init_sem);
+		if ((tq_init_seq[0] & HP_SDC_ACT_DEAD) == HP_SDC_ACT_DEAD) {
+			printk(KERN_WARNING PREFIX "Error reading extended config byte.\n");
+			return -ENODEV;
+		}
+		hp_sdc.r7e = tq_init_seq[4];
+		HP_SDC_XTD_REV_STRINGS(hp_sdc.r7e & HP_SDC_XTD_REV, str)
+		printk(KERN_INFO PREFIX "Revision: %s\n", str);
+		if (hp_sdc.r7e & HP_SDC_XTD_BEEPER)
+			printk(KERN_INFO PREFIX "TI SN76494 beeper present\n");
+		if (hp_sdc.r7e & HP_SDC_XTD_BBRTC)
+			printk(KERN_INFO PREFIX "OKI MSM-58321 BBRTC present\n");
+		printk(KERN_INFO PREFIX "Spunking the self test register to force PUP "
+		       "on next firmware reset.\n");
+		tq_init_seq[0] = HP_SDC_ACT_PRECMD |
+			HP_SDC_ACT_DATAOUT | HP_SDC_ACT_SEMAPHORE;
+		tq_init_seq[1] = HP_SDC_CMD_SET_STR;
+		tq_init_seq[2] = 1;
+		tq_init_seq[3] = 0;
+		tq_init.actidx		= 0;
+		tq_init.idx		= 1;
+		tq_init.endidx		= 4;
+		down(&tq_init_sem);
+		hp_sdc_enqueue_transaction(&tq_init);
+		down(&tq_init_sem);
+		up(&tq_init_sem);
+	} else
+		printk(KERN_INFO PREFIX "Old style SDC (1820-%s).\n",
+		       (hp_sdc.r11 & HP_SDC_CFG_REV) ? "3300" : "2564/3087");
+
+        return 0;
+}
+
+module_init(hp_sdc_register);
+module_exit(hp_sdc_exit);
+
+/* Timing notes:  These measurements taken on my 64MHz 7100-LC (715/64)
+ *                                              cycles cycles-adj    time
+ * between two consecutive mfctl(16)'s:              4        n/a    63ns
+ * hp_sdc_spin_ibf when idle:                      119        115   1.7us
+ * gsc_writeb status register:                      83         79   1.2us
+ * IBF to clear after sending SET_IM:             6204       6006    93us
+ * IBF to clear after sending LOAD_RT:            4467       4352    68us
+ * IBF to clear after sending two LOAD_RTs:      18974      18859   295us
+ * READ_T1, read status/data, IRQ, call handler: 35564        n/a   556us
+ * cmd to ~IBF READ_T1 2nd time right after:   5158403        n/a    81ms
+ * between IRQ received and ~IBF for above:    2578877        n/a    40ms
+ *
+ * Performance stats after a run of this module configuring HIL and
+ * receiving a few mouse events:
+ *
+ * status in8  282508 cycles 7128 calls
+ * status out8   8404 cycles  341 calls
+ * data out8     1734 cycles   78 calls
+ * isr         174324 cycles  617 calls (includes take)
+ * take          1241 cycles    2 calls
+ * put        1411504 cycles 6937 calls
+ * task       1655209 cycles 6937 calls (includes put)
+ *
+ */
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
new file mode 100644
index 000000000..3e85e9039
--- /dev/null
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -0,0 +1,355 @@
+/*
+ * Access to HP-HIL MLC through HP System Device Controller.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ * System Device Controller Microprocessor Firmware Theory of Operation
+ *      for Part Number 1820-4784 Revision B.  Dwg No. A-1820-4784-2
+ *
+ */
+
+#include <linux/hil_mlc.h>
+#include <linux/hp_sdc.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/semaphore.h>
+
+#define PREFIX "HP SDC MLC: "
+
+static hil_mlc hp_sdc_mlc;
+
+MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
+MODULE_DESCRIPTION("Glue for onboard HIL MLC in HP-PARISC machines");
+MODULE_LICENSE("Dual BSD/GPL");
+
+static struct hp_sdc_mlc_priv_s {
+	int emtestmode;
+	hp_sdc_transaction trans;
+	u8 tseq[16];
+	int got5x;
+} hp_sdc_mlc_priv;
+
+/************************* Interrupt context ******************************/
+static void hp_sdc_mlc_isr (int irq, void *dev_id,
+			    uint8_t status, uint8_t data)
+{
+	int idx;
+	hil_mlc *mlc = &hp_sdc_mlc;
+
+	write_lock(&mlc->lock);
+	if (mlc->icount < 0) {
+		printk(KERN_WARNING PREFIX "HIL Overflow!\n");
+		up(&mlc->isem);
+		goto out;
+	}
+	idx = 15 - mlc->icount;
+	if ((status & HP_SDC_STATUS_IRQMASK) == HP_SDC_STATUS_HILDATA) {
+		mlc->ipacket[idx] |= data | HIL_ERR_INT;
+		mlc->icount--;
+		if (hp_sdc_mlc_priv.got5x || !idx)
+			goto check;
+		if ((mlc->ipacket[idx - 1] & HIL_PKT_ADDR_MASK) !=
+		    (mlc->ipacket[idx] & HIL_PKT_ADDR_MASK)) {
+			mlc->ipacket[idx] &= ~HIL_PKT_ADDR_MASK;
+			mlc->ipacket[idx] |= (mlc->ipacket[idx - 1]
+						& HIL_PKT_ADDR_MASK);
+		}
+		goto check;
+	}
+	/* We know status is 5X */
+	if (data & HP_SDC_HIL_ISERR)
+		goto err;
+	mlc->ipacket[idx] =
+		(data & HP_SDC_HIL_R1MASK) << HIL_PKT_ADDR_SHIFT;
+	hp_sdc_mlc_priv.got5x = 1;
+	goto out;
+
+ check:
+	hp_sdc_mlc_priv.got5x = 0;
+	if (mlc->imatch == 0)
+		goto done;
+	if ((mlc->imatch == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL))
+	    && (mlc->ipacket[idx] == (mlc->imatch | idx)))
+		goto done;
+	if (mlc->ipacket[idx] == mlc->imatch)
+		goto done;
+	goto out;
+
+ err:
+	printk(KERN_DEBUG PREFIX "err code %x\n", data);
+
+	switch (data) {
+	case HP_SDC_HIL_RC_DONE:
+		printk(KERN_WARNING PREFIX "Bastard SDC reconfigured loop!\n");
+		break;
+
+	case HP_SDC_HIL_ERR:
+		mlc->ipacket[idx] |= HIL_ERR_INT | HIL_ERR_PERR |
+					HIL_ERR_FERR | HIL_ERR_FOF;
+		break;
+
+	case HP_SDC_HIL_TO:
+		mlc->ipacket[idx] |= HIL_ERR_INT | HIL_ERR_LERR;
+		break;
+
+	case HP_SDC_HIL_RC:
+		printk(KERN_WARNING PREFIX "Bastard SDC decided to reconfigure loop!\n");
+		break;
+
+	default:
+		printk(KERN_WARNING PREFIX "Unknown HIL Error status (%x)!\n", data);
+		break;
+	}
+
+	/* No more data will be coming due to an error. */
+ done:
+	tasklet_schedule(mlc->tasklet);
+	up(&mlc->isem);
+ out:
+	write_unlock(&mlc->lock);
+}
+
+
+/******************** Tasklet or userspace context functions ****************/
+
+static int hp_sdc_mlc_in(hil_mlc *mlc, suseconds_t timeout)
+{
+	struct hp_sdc_mlc_priv_s *priv;
+	int rc = 2;
+
+	priv = mlc->priv;
+
+	/* Try to down the semaphore */
+	if (down_trylock(&mlc->isem)) {
+		if (priv->emtestmode) {
+			mlc->ipacket[0] =
+				HIL_ERR_INT | (mlc->opacket &
+					       (HIL_PKT_CMD |
+						HIL_PKT_ADDR_MASK |
+						HIL_PKT_DATA_MASK));
+			mlc->icount = 14;
+			/* printk(KERN_DEBUG PREFIX ">[%x]\n", mlc->ipacket[0]); */
+			goto wasup;
+		}
+		if (time_after(jiffies, mlc->instart + mlc->intimeout)) {
+			/*	printk("!%i %i",
+				tv.tv_usec - mlc->instart.tv_usec,
+				mlc->intimeout);
+			 */
+			rc = 1;
+			up(&mlc->isem);
+		}
+		goto done;
+	}
+ wasup:
+	up(&mlc->isem);
+	rc = 0;
+ done:
+	return rc;
+}
+
+static int hp_sdc_mlc_cts(hil_mlc *mlc)
+{
+	struct hp_sdc_mlc_priv_s *priv;
+
+	priv = mlc->priv;
+
+	/* Try to down the semaphores -- they should be up. */
+	BUG_ON(down_trylock(&mlc->isem));
+	BUG_ON(down_trylock(&mlc->osem));
+
+	up(&mlc->isem);
+	up(&mlc->osem);
+
+	if (down_trylock(&mlc->csem)) {
+		if (priv->trans.act.semaphore != &mlc->csem)
+			goto poll;
+		else
+			goto busy;
+	}
+
+	if (!(priv->tseq[4] & HP_SDC_USE_LOOP))
+		goto done;
+
+ poll:
+	priv->trans.act.semaphore = &mlc->csem;
+	priv->trans.actidx = 0;
+	priv->trans.idx = 1;
+	priv->trans.endidx = 5;
+	priv->tseq[0] =
+		HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN | HP_SDC_ACT_SEMAPHORE;
+	priv->tseq[1] = HP_SDC_CMD_READ_USE;
+	priv->tseq[2] = 1;
+	priv->tseq[3] = 0;
+	priv->tseq[4] = 0;
+	return __hp_sdc_enqueue_transaction(&priv->trans);
+ busy:
+	return 1;
+ done:
+	priv->trans.act.semaphore = &mlc->osem;
+	up(&mlc->csem);
+	return 0;
+}
+
+static int hp_sdc_mlc_out(hil_mlc *mlc)
+{
+	struct hp_sdc_mlc_priv_s *priv;
+
+	priv = mlc->priv;
+
+	/* Try to down the semaphore -- it should be up. */
+	BUG_ON(down_trylock(&mlc->osem));
+
+	if (mlc->opacket & HIL_DO_ALTER_CTRL)
+		goto do_control;
+
+ do_data:
+	if (priv->emtestmode) {
+		up(&mlc->osem);
+		return 0;
+	}
+	/* Shouldn't be sending commands when loop may be busy */
+	BUG_ON(down_trylock(&mlc->csem));
+	up(&mlc->csem);
+
+	priv->trans.actidx = 0;
+	priv->trans.idx = 1;
+	priv->trans.act.semaphore = &mlc->osem;
+	priv->trans.endidx = 6;
+	priv->tseq[0] =
+		HP_SDC_ACT_DATAREG | HP_SDC_ACT_POSTCMD | HP_SDC_ACT_SEMAPHORE;
+	priv->tseq[1] = 0x7;
+	priv->tseq[2] =
+		(mlc->opacket &
+		 (HIL_PKT_ADDR_MASK | HIL_PKT_CMD))
+		   >> HIL_PKT_ADDR_SHIFT;
+	priv->tseq[3] =
+		(mlc->opacket & HIL_PKT_DATA_MASK)
+		  >> HIL_PKT_DATA_SHIFT;
+	priv->tseq[4] = 0;  /* No timeout */
+	if (priv->tseq[3] == HIL_CMD_DHR)
+		priv->tseq[4] = 1;
+	priv->tseq[5] = HP_SDC_CMD_DO_HIL;
+	goto enqueue;
+
+ do_control:
+	priv->emtestmode = mlc->opacket & HIL_CTRL_TEST;
+
+	/* we cannot emulate this, it should not be used. */
+	BUG_ON((mlc->opacket & (HIL_CTRL_APE | HIL_CTRL_IPF)) == HIL_CTRL_APE);
+
+	if ((mlc->opacket & HIL_CTRL_ONLY) == HIL_CTRL_ONLY)
+		goto control_only;
+
+	/* Should not send command/data after engaging APE */
+	BUG_ON(mlc->opacket & HIL_CTRL_APE);
+
+	/* Disengaging APE this way would not be valid either since
+	 * the loop must be allowed to idle.
+	 *
+	 * So, it works out that we really never actually send control
+	 * and data when using SDC, we just send the data.
+	 */
+	goto do_data;
+
+ control_only:
+	priv->trans.actidx = 0;
+	priv->trans.idx = 1;
+	priv->trans.act.semaphore = &mlc->osem;
+	priv->trans.endidx = 4;
+	priv->tseq[0] =
+	  HP_SDC_ACT_PRECMD | HP_SDC_ACT_DATAOUT | HP_SDC_ACT_SEMAPHORE;
+	priv->tseq[1] = HP_SDC_CMD_SET_LPC;
+	priv->tseq[2] = 1;
+	/* priv->tseq[3] = (mlc->ddc + 1) | HP_SDC_LPS_ACSUCC; */
+	priv->tseq[3] = 0;
+	if (mlc->opacket & HIL_CTRL_APE) {
+		priv->tseq[3] |= HP_SDC_LPC_APE_IPF;
+		BUG_ON(down_trylock(&mlc->csem));
+	}
+ enqueue:
+	return hp_sdc_enqueue_transaction(&priv->trans);
+}
+
+static int __init hp_sdc_mlc_init(void)
+{
+	hil_mlc *mlc = &hp_sdc_mlc;
+	int err;
+
+#ifdef __mc68000__
+	if (!MACH_IS_HP300)
+		return -ENODEV;
+#endif
+
+	printk(KERN_INFO PREFIX "Registering the System Domain Controller's HIL MLC.\n");
+
+	hp_sdc_mlc_priv.emtestmode = 0;
+	hp_sdc_mlc_priv.trans.seq = hp_sdc_mlc_priv.tseq;
+	hp_sdc_mlc_priv.trans.act.semaphore = &mlc->osem;
+	hp_sdc_mlc_priv.got5x = 0;
+
+	mlc->cts = &hp_sdc_mlc_cts;
+	mlc->in	= &hp_sdc_mlc_in;
+	mlc->out = &hp_sdc_mlc_out;
+	mlc->priv = &hp_sdc_mlc_priv;
+
+	err = hil_mlc_register(mlc);
+	if (err) {
+		printk(KERN_WARNING PREFIX "Failed to register MLC structure with hil_mlc\n");
+		return err;
+	}
+
+	if (hp_sdc_request_hil_irq(&hp_sdc_mlc_isr)) {
+		printk(KERN_WARNING PREFIX "Request for raw HIL ISR hook denied\n");
+		if (hil_mlc_unregister(mlc))
+			printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
+				"This is bad.  Could cause an oops.\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static void __exit hp_sdc_mlc_exit(void)
+{
+	hil_mlc *mlc = &hp_sdc_mlc;
+
+	if (hp_sdc_release_hil_irq(&hp_sdc_mlc_isr))
+		printk(KERN_ERR PREFIX "Failed to release the raw HIL ISR hook.\n"
+			"This is bad.  Could cause an oops.\n");
+
+	if (hil_mlc_unregister(mlc))
+		printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
+			"This is bad.  Could cause an oops.\n");
+}
+
+module_init(hp_sdc_mlc_init);
+module_exit(hp_sdc_mlc_exit);
diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c
new file mode 100644
index 000000000..13434b933
--- /dev/null
+++ b/drivers/input/serio/hyperv-keyboard.c
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (c) 2013, Microsoft Corporation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/completion.h>
+#include <linux/hyperv.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+
+/*
+ * Current version 1.0
+ *
+ */
+#define SYNTH_KBD_VERSION_MAJOR 1
+#define SYNTH_KBD_VERSION_MINOR	0
+#define SYNTH_KBD_VERSION		(SYNTH_KBD_VERSION_MINOR | \
+					 (SYNTH_KBD_VERSION_MAJOR << 16))
+
+
+/*
+ * Message types in the synthetic input protocol
+ */
+enum synth_kbd_msg_type {
+	SYNTH_KBD_PROTOCOL_REQUEST = 1,
+	SYNTH_KBD_PROTOCOL_RESPONSE = 2,
+	SYNTH_KBD_EVENT = 3,
+	SYNTH_KBD_LED_INDICATORS = 4,
+};
+
+/*
+ * Basic message structures.
+ */
+struct synth_kbd_msg_hdr {
+	__le32 type;
+};
+
+struct synth_kbd_msg {
+	struct synth_kbd_msg_hdr header;
+	char data[]; /* Enclosed message */
+};
+
+union synth_kbd_version {
+	__le32 version;
+};
+
+/*
+ * Protocol messages
+ */
+struct synth_kbd_protocol_request {
+	struct synth_kbd_msg_hdr header;
+	union synth_kbd_version version_requested;
+};
+
+#define PROTOCOL_ACCEPTED	BIT(0)
+struct synth_kbd_protocol_response {
+	struct synth_kbd_msg_hdr header;
+	__le32 proto_status;
+};
+
+#define IS_UNICODE	BIT(0)
+#define IS_BREAK	BIT(1)
+#define IS_E0		BIT(2)
+#define IS_E1		BIT(3)
+struct synth_kbd_keystroke {
+	struct synth_kbd_msg_hdr header;
+	__le16 make_code;
+	__le16 reserved0;
+	__le32 info; /* Additional information */
+};
+
+
+#define HK_MAXIMUM_MESSAGE_SIZE 256
+
+#define KBD_VSC_SEND_RING_BUFFER_SIZE	VMBUS_RING_SIZE(36 * 1024)
+#define KBD_VSC_RECV_RING_BUFFER_SIZE	VMBUS_RING_SIZE(36 * 1024)
+
+#define XTKBD_EMUL0     0xe0
+#define XTKBD_EMUL1     0xe1
+#define XTKBD_RELEASE   0x80
+
+
+/*
+ * Represents a keyboard device
+ */
+struct hv_kbd_dev {
+	struct hv_device *hv_dev;
+	struct serio *hv_serio;
+	struct synth_kbd_protocol_request protocol_req;
+	struct synth_kbd_protocol_response protocol_resp;
+	/* Synchronize the request/response if needed */
+	struct completion wait_event;
+	spinlock_t lock; /* protects 'started' field */
+	bool started;
+};
+
+static void hv_kbd_on_receive(struct hv_device *hv_dev,
+			      struct synth_kbd_msg *msg, u32 msg_length)
+{
+	struct hv_kbd_dev *kbd_dev = hv_get_drvdata(hv_dev);
+	struct synth_kbd_keystroke *ks_msg;
+	u32 msg_type = __le32_to_cpu(msg->header.type);
+	u32 info;
+	u16 scan_code;
+
+	switch (msg_type) {
+	case SYNTH_KBD_PROTOCOL_RESPONSE:
+		/*
+		 * Validate the information provided by the host.
+		 * If the host is giving us a bogus packet,
+		 * drop the packet (hoping the problem
+		 * goes away).
+		 */
+		if (msg_length < sizeof(struct synth_kbd_protocol_response)) {
+			dev_err(&hv_dev->device,
+				"Illegal protocol response packet (len: %d)\n",
+				msg_length);
+			break;
+		}
+
+		memcpy(&kbd_dev->protocol_resp, msg,
+			sizeof(struct synth_kbd_protocol_response));
+		complete(&kbd_dev->wait_event);
+		break;
+
+	case SYNTH_KBD_EVENT:
+		/*
+		 * Validate the information provided by the host.
+		 * If the host is giving us a bogus packet,
+		 * drop the packet (hoping the problem
+		 * goes away).
+		 */
+		if (msg_length < sizeof(struct  synth_kbd_keystroke)) {
+			dev_err(&hv_dev->device,
+				"Illegal keyboard event packet (len: %d)\n",
+				msg_length);
+			break;
+		}
+
+		ks_msg = (struct synth_kbd_keystroke *)msg;
+		info = __le32_to_cpu(ks_msg->info);
+
+		/*
+		 * Inject the information through the serio interrupt.
+		 */
+		scoped_guard(spinlock_irqsave, &kbd_dev->lock) {
+			if (kbd_dev->started) {
+				if (info & IS_E0)
+					serio_interrupt(kbd_dev->hv_serio,
+							XTKBD_EMUL0, 0);
+				if (info & IS_E1)
+					serio_interrupt(kbd_dev->hv_serio,
+							XTKBD_EMUL1, 0);
+				scan_code = __le16_to_cpu(ks_msg->make_code);
+				if (info & IS_BREAK)
+					scan_code |= XTKBD_RELEASE;
+
+				serio_interrupt(kbd_dev->hv_serio,
+						scan_code, 0);
+			}
+		}
+
+		/*
+		 * Only trigger a wakeup on key down, otherwise
+		 * "echo freeze > /sys/power/state" can't really enter the
+		 * state because the Enter-UP can trigger a wakeup at once.
+		 */
+		if (!(info & IS_BREAK))
+			pm_wakeup_hard_event(&hv_dev->device);
+
+		break;
+
+	default:
+		dev_err(&hv_dev->device,
+			"unhandled message type %d\n", msg_type);
+	}
+}
+
+static void hv_kbd_handle_received_packet(struct hv_device *hv_dev,
+					  struct vmpacket_descriptor *desc,
+					  u32 bytes_recvd,
+					  u64 req_id)
+{
+	struct synth_kbd_msg *msg;
+	u32 msg_sz;
+
+	switch (desc->type) {
+	case VM_PKT_COMP:
+		break;
+
+	case VM_PKT_DATA_INBAND:
+		/*
+		 * We have a packet that has "inband" data. The API used
+		 * for retrieving the packet guarantees that the complete
+		 * packet is read. So, minimally, we should be able to
+		 * parse the payload header safely (assuming that the host
+		 * can be trusted.  Trusting the host seems to be a
+		 * reasonable assumption because in a virtualized
+		 * environment there is not whole lot you can do if you
+		 * don't trust the host.
+		 *
+		 * Nonetheless, let us validate if the host can be trusted
+		 * (in a trivial way).  The interesting aspect of this
+		 * validation is how do you recover if we discover that the
+		 * host is not to be trusted? Simply dropping the packet, I
+		 * don't think is an appropriate recovery.  In the interest
+		 * of failing fast, it may be better to crash the guest.
+		 * For now, I will just drop the packet!
+		 */
+
+		msg_sz = bytes_recvd - (desc->offset8 << 3);
+		if (msg_sz <= sizeof(struct synth_kbd_msg_hdr)) {
+			/*
+			 * Drop the packet and hope
+			 * the problem magically goes away.
+			 */
+			dev_err(&hv_dev->device,
+				"Illegal packet (type: %d, tid: %llx, size: %d)\n",
+				desc->type, req_id, msg_sz);
+			break;
+		}
+
+		msg = (void *)desc + (desc->offset8 << 3);
+		hv_kbd_on_receive(hv_dev, msg, msg_sz);
+		break;
+
+	default:
+		dev_err(&hv_dev->device,
+			"unhandled packet type %d, tid %llx len %d\n",
+			desc->type, req_id, bytes_recvd);
+		break;
+	}
+}
+
+static void hv_kbd_on_channel_callback(void *context)
+{
+	struct vmpacket_descriptor *desc;
+	struct hv_device *hv_dev = context;
+	u32 bytes_recvd;
+	u64 req_id;
+
+	foreach_vmbus_pkt(desc, hv_dev->channel) {
+		bytes_recvd = desc->len8 * 8;
+		req_id = desc->trans_id;
+
+		hv_kbd_handle_received_packet(hv_dev, desc, bytes_recvd,
+					      req_id);
+	}
+}
+
+static int hv_kbd_connect_to_vsp(struct hv_device *hv_dev)
+{
+	struct hv_kbd_dev *kbd_dev = hv_get_drvdata(hv_dev);
+	struct synth_kbd_protocol_request *request;
+	struct synth_kbd_protocol_response *response;
+	u32 proto_status;
+	int error;
+
+	reinit_completion(&kbd_dev->wait_event);
+
+	request = &kbd_dev->protocol_req;
+	memset(request, 0, sizeof(struct synth_kbd_protocol_request));
+	request->header.type = __cpu_to_le32(SYNTH_KBD_PROTOCOL_REQUEST);
+	request->version_requested.version = __cpu_to_le32(SYNTH_KBD_VERSION);
+
+	error = vmbus_sendpacket(hv_dev->channel, request,
+				 sizeof(struct synth_kbd_protocol_request),
+				 (unsigned long)request,
+				 VM_PKT_DATA_INBAND,
+				 VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+	if (error)
+		return error;
+
+	if (!wait_for_completion_timeout(&kbd_dev->wait_event, 10 * HZ))
+		return -ETIMEDOUT;
+
+	response = &kbd_dev->protocol_resp;
+	proto_status = __le32_to_cpu(response->proto_status);
+	if (!(proto_status & PROTOCOL_ACCEPTED)) {
+		dev_err(&hv_dev->device,
+			"synth_kbd protocol request failed (version %d)\n",
+		        SYNTH_KBD_VERSION);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int hv_kbd_start(struct serio *serio)
+{
+	struct hv_kbd_dev *kbd_dev = serio->port_data;
+
+	guard(spinlock_irqsave)(&kbd_dev->lock);
+
+	kbd_dev->started = true;
+
+	return 0;
+}
+
+static void hv_kbd_stop(struct serio *serio)
+{
+	struct hv_kbd_dev *kbd_dev = serio->port_data;
+
+	guard(spinlock_irqsave)(&kbd_dev->lock);
+
+	kbd_dev->started = false;
+}
+
+static int hv_kbd_probe(struct hv_device *hv_dev,
+			const struct hv_vmbus_device_id *dev_id)
+{
+	struct hv_kbd_dev *kbd_dev;
+	struct serio *hv_serio;
+	int error;
+
+	kbd_dev = kzalloc_obj(*kbd_dev);
+	hv_serio = kzalloc_obj(*hv_serio);
+	if (!kbd_dev || !hv_serio) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	kbd_dev->hv_dev = hv_dev;
+	kbd_dev->hv_serio = hv_serio;
+	spin_lock_init(&kbd_dev->lock);
+	init_completion(&kbd_dev->wait_event);
+	hv_set_drvdata(hv_dev, kbd_dev);
+
+	hv_serio->dev.parent  = &hv_dev->device;
+	hv_serio->id.type = SERIO_8042_XL;
+	hv_serio->port_data = kbd_dev;
+	strscpy(hv_serio->name, dev_name(&hv_dev->device),
+		sizeof(hv_serio->name));
+	strscpy(hv_serio->phys, dev_name(&hv_dev->device),
+		sizeof(hv_serio->phys));
+
+	hv_serio->start = hv_kbd_start;
+	hv_serio->stop = hv_kbd_stop;
+
+	error = vmbus_open(hv_dev->channel,
+			   KBD_VSC_SEND_RING_BUFFER_SIZE,
+			   KBD_VSC_RECV_RING_BUFFER_SIZE,
+			   NULL, 0,
+			   hv_kbd_on_channel_callback,
+			   hv_dev);
+	if (error)
+		goto err_free_mem;
+
+	error = hv_kbd_connect_to_vsp(hv_dev);
+	if (error)
+		goto err_close_vmbus;
+
+	serio_register_port(kbd_dev->hv_serio);
+
+	device_init_wakeup(&hv_dev->device, true);
+
+	return 0;
+
+err_close_vmbus:
+	vmbus_close(hv_dev->channel);
+err_free_mem:
+	kfree(hv_serio);
+	kfree(kbd_dev);
+	return error;
+}
+
+static void hv_kbd_remove(struct hv_device *hv_dev)
+{
+	struct hv_kbd_dev *kbd_dev = hv_get_drvdata(hv_dev);
+
+	serio_unregister_port(kbd_dev->hv_serio);
+	vmbus_close(hv_dev->channel);
+	kfree(kbd_dev);
+
+	hv_set_drvdata(hv_dev, NULL);
+}
+
+static int hv_kbd_suspend(struct hv_device *hv_dev)
+{
+	vmbus_close(hv_dev->channel);
+
+	return 0;
+}
+
+static int hv_kbd_resume(struct hv_device *hv_dev)
+{
+	int ret;
+
+	ret = vmbus_open(hv_dev->channel,
+			 KBD_VSC_SEND_RING_BUFFER_SIZE,
+			 KBD_VSC_RECV_RING_BUFFER_SIZE,
+			 NULL, 0,
+			 hv_kbd_on_channel_callback,
+			 hv_dev);
+	if (ret == 0)
+		ret = hv_kbd_connect_to_vsp(hv_dev);
+
+	return ret;
+}
+
+static const struct hv_vmbus_device_id id_table[] = {
+	/* Keyboard guid */
+	{ HV_KBD_GUID, },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(vmbus, id_table);
+
+static struct  hv_driver hv_kbd_drv = {
+	.name = KBUILD_MODNAME,
+	.id_table = id_table,
+	.probe = hv_kbd_probe,
+	.remove = hv_kbd_remove,
+	.suspend = hv_kbd_suspend,
+	.resume = hv_kbd_resume,
+	.driver = {
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+static int __init hv_kbd_init(void)
+{
+	return vmbus_driver_register(&hv_kbd_drv);
+}
+
+static void __exit hv_kbd_exit(void)
+{
+	vmbus_driver_unregister(&hv_kbd_drv);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Microsoft Hyper-V Synthetic Keyboard Driver");
+
+module_init(hv_kbd_init);
+module_exit(hv_kbd_exit);
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
new file mode 100644
index 000000000..412f82d7a
--- /dev/null
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -0,0 +1,1855 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _I8042_ACPIPNPIO_H
+#define _I8042_ACPIPNPIO_H
+
+#include <linux/acpi.h>
+
+#ifdef CONFIG_X86
+#include <asm/x86_init.h>
+#endif
+
+/*
+ * Names.
+ */
+
+#define I8042_KBD_PHYS_DESC "isa0060/serio0"
+#define I8042_AUX_PHYS_DESC "isa0060/serio1"
+#define I8042_MUX_PHYS_DESC "isa0060/serio%d"
+
+/*
+ * IRQs.
+ */
+
+#if defined(__ia64__)
+# define I8042_MAP_IRQ(x)	isa_irq_to_vector((x))
+#else
+# define I8042_MAP_IRQ(x)	(x)
+#endif
+
+#define I8042_KBD_IRQ	i8042_kbd_irq
+#define I8042_AUX_IRQ	i8042_aux_irq
+
+static int i8042_kbd_irq;
+static int i8042_aux_irq;
+
+/*
+ * Register numbers.
+ */
+
+#define I8042_COMMAND_REG	i8042_command_reg
+#define I8042_STATUS_REG	i8042_command_reg
+#define I8042_DATA_REG		i8042_data_reg
+
+static int i8042_command_reg = 0x64;
+static int i8042_data_reg = 0x60;
+
+
+static inline int i8042_read_data(void)
+{
+	return inb(I8042_DATA_REG);
+}
+
+static inline int i8042_read_status(void)
+{
+	return inb(I8042_STATUS_REG);
+}
+
+static inline void i8042_write_data(int val)
+{
+	outb(val, I8042_DATA_REG);
+}
+
+static inline void i8042_write_command(int val)
+{
+	outb(val, I8042_COMMAND_REG);
+}
+
+#ifdef CONFIG_X86
+
+#include <linux/dmi.h>
+
+#define SERIO_QUIRK_NOKBD		BIT(0)
+#define SERIO_QUIRK_NOAUX		BIT(1)
+#define SERIO_QUIRK_NOMUX		BIT(2)
+#define SERIO_QUIRK_FORCEMUX		BIT(3)
+#define SERIO_QUIRK_UNLOCK		BIT(4)
+#define SERIO_QUIRK_PROBE_DEFER		BIT(5)
+#define SERIO_QUIRK_RESET_ALWAYS	BIT(6)
+#define SERIO_QUIRK_RESET_NEVER		BIT(7)
+#define SERIO_QUIRK_DIRECT		BIT(8)
+#define SERIO_QUIRK_DUMBKBD		BIT(9)
+#define SERIO_QUIRK_NOLOOP		BIT(10)
+#define SERIO_QUIRK_NOTIMEOUT		BIT(11)
+#define SERIO_QUIRK_KBDRESET		BIT(12)
+#define SERIO_QUIRK_DRITEK		BIT(13)
+#define SERIO_QUIRK_NOPNP		BIT(14)
+#define SERIO_QUIRK_FORCENORESTORE	BIT(15)
+
+/* Quirk table for different mainboards. Options similar or identical to i8042
+ * module parameters.
+ * ORDERING IS IMPORTANT! The first match will be apllied and the rest ignored.
+ * This allows entries to overwrite vendor wide quirks on a per device basis.
+ * Where this is irrelevant, entries are sorted case sensitive by DMI_SYS_VENDOR
+ * and/or DMI_BOARD_VENDOR to make it easier to avoid duplicate entries.
+ */
+static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X750LN"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Asus X450LCP */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_NEVER)
+	},
+	{
+		/*
+		 * ASUS Zenbook UX425QA_UM425QA
+		 * Some Zenbooks report "Zenbook" with a lowercase b.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Zenbook UX425QA_UM425QA"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_PROBE_DEFER | SERIO_QUIRK_RESET_NEVER)
+	},
+	{
+		/* ASUS ZenBook UX425UA/QA */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX425"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_PROBE_DEFER | SERIO_QUIRK_RESET_NEVER)
+	},
+	{
+		/* ASUS ZenBook UM325UA/QA */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_PROBE_DEFER | SERIO_QUIRK_RESET_NEVER)
+	},
+	/*
+	 * On some Asus laptops, just running self tests cause problems.
+	 */
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_NEVER)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "31"), /* Convertible Notebook */
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_NEVER)
+	},
+	{
+		/* ASUS P65UP5 - AUX LOOP command does not raise AUX IRQ */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "P/I-P65UP5"),
+			DMI_MATCH(DMI_BOARD_VERSION, "REV 2.X"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* ASUS G1S */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."),
+			DMI_MATCH(DMI_BOARD_NAME, "G1S"),
+			DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Acer Aspire 5710 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Acer Aspire 7738 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7738"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Acer Aspire 5536 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/*
+		 * Acer Aspire 5738z
+		 * Touchpad stops working in mux mode when dis- + re-enabled
+		 * with the touchpad enable/disable toggle hotkey
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Acer Aspire One 150 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* Acer Aspire One 532h */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AO532h"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A114-31"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A314-31"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A315-31"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-132"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-332"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-432"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate Spin B118-RN"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	/*
+	 * Some Wistron based laptops need us to explicitly enable the 'Dritek
+	 * keyboard extension' to make their extra keys start generating scancodes.
+	 * Originally, this was just confined to older laptops, but a few Acer laptops
+	 * have turned up in 2007 that also need this again.
+	 */
+	{
+		/* Acer Aspire 5100 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		/* Acer Aspire 5610 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		/* Acer Aspire 5630 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5630"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		/* Acer Aspire 5650 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5650"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		/* Acer Aspire 5680 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5680"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		/* Acer Aspire 5720 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		/* Acer Aspire 9110 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		/* Acer TravelMate 660 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		/* Acer TravelMate 2490 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		/* Acer TravelMate 4280 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
+	},
+	{
+		/* Acer TravelMate P459-G2-M */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate P459-G2-M"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Amoi M636/A737 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ByteSpeed LLC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ByteSpeed Laptop C15B"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Compal HEL80I */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "8500"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "DL760"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Advent 4211 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* Dell Embedded Box PC 3000 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Embedded Box PC 3000"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Dell XPS M1530 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Dell Vostro 1510 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Dell Vostro V13 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_NOTIMEOUT)
+	},
+	{
+		/* Dell Vostro 1320 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1320"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* Dell Vostro 1520 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1520"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* Dell Vostro 1720 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* Entroware Proteus */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Entroware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Proteus"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "EL07R4"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS)
+	},
+	/*
+	 * Some Fujitsu notebooks are having trouble with touchpads if
+	 * active multiplexing mode is activated. Luckily they don't have
+	 * external PS/2 ports so we can safely disable it.
+	 * ... apparently some Toshibas don't like MUX mode either and
+	 * die horrible death on reboot.
+	 */
+	{
+		/* Fujitsu Lifebook P7010/P7010D */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P7010"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu Lifebook P5020D */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P Series"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu Lifebook S2000 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S Series"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu Lifebook S6230 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu Lifebook T725 laptop */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T725"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_NOTIMEOUT)
+	},
+	{
+		/* Fujitsu Lifebook U745 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U745"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu T70H */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu A544 laptop */
+		/* https://bugzilla.redhat.com/show_bug.cgi?id=1111138 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK A544"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOTIMEOUT)
+	},
+	{
+		/* Fujitsu AH544 laptop */
+		/* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK AH544"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOTIMEOUT)
+	},
+	{
+		/* Fujitsu U574 laptop */
+		/* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOTIMEOUT)
+	},
+	{
+		/* Fujitsu UH554 laptop */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK UH544"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOTIMEOUT)
+	},
+	{
+		/* Fujitsu Lifebook P7010 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "0000000000"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu-Siemens Lifebook T3010 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu-Siemens Lifebook E4010 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E4010"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu-Siemens Amilo Pro 2010 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu-Siemens Amilo Pro 2030 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu Lifebook A574/H */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "FMVA0501PZ"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu Lifebook E756 */
+		/* https://bugzilla.suse.com/show_bug.cgi?id=1229056 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E756"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Fujitsu Lifebook E5411 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU CLIENT COMPUTING LIMITED"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E5411"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
+	{
+		/* Fujitsu Lifebook U728 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U728"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
+	{
+		/* Gigabyte M912 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "M912"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "01"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Gigabyte Spring Peak - defines wrong chassis type */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Gigabyte T1005 - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Gigabyte T1005M/P - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	/*
+	 * Some laptops need keyboard reset before probing for the trackpad to get
+	 * it detected, initialised & finally work.
+	 */
+	{
+		/* Gigabyte P35 v2 - Elantech touchpad */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P35V2"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_KBDRESET)
+	},
+		{
+		/* Aorus branded Gigabyte X3 Plus - Elantech touchpad */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X3"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_KBDRESET)
+	},
+	{
+		/* Gigabyte P34 - Elantech touchpad */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P34"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_KBDRESET)
+	},
+	{
+		/* Gigabyte P57 - Elantech touchpad */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "P57"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_KBDRESET)
+	},
+	{
+		/* Gericom Bellagio */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Gericom"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N34AS6"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Gigabyte M1022M netbook */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co.,Ltd."),
+			DMI_MATCH(DMI_BOARD_NAME, "M1022E"),
+			DMI_MATCH(DMI_BOARD_VERSION, "1.02"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Rev 1"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/*
+		 * HP Pavilion DV4017EA -
+		 * errors on MUX ports are reported without raising AUXDATA
+		 * causing "spurious NAK" messages.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EA032EA#ABF)"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/*
+		 * HP Pavilion ZT1000 -
+		 * like DV4017EA does not raise AUXERR for errors on MUX ports.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Notebook PC"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook ZT1000"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/*
+		 * HP Pavilion DV4270ca -
+		 * like DV4017EA does not raise AUXERR for errors on MUX ports.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EH476UA#ABL)"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Newer HP Pavilion dv4 models */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_NOTIMEOUT)
+	},
+	{
+		/* IBM 2656 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Avatar AVIU-145A6 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Intel MBO Desktop D845PESV */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "D845PESV"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOPNP)
+	},
+	{
+		/*
+		 * Intel NUC D54250WYK - does not have i8042 controller but
+		 * declares PS/2 devices in DSDT.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "D54250WYK"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOPNP)
+	},
+	{
+		/* Lenovo 3000 n100 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Lenovo XiaoXin Air 12 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "80UN"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Lenovo LaVie Z */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Lenovo Ideapad U455 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20046"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* Lenovo ThinkPad L460 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L460"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* Lenovo ThinkPad Twist S230u */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* LG Electronics X110 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
+			DMI_MATCH(DMI_BOARD_NAME, "X110"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* Medion Akoya Mini E1210 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E1210"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* Medion Akoya E1222 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E122X"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	{
+		/* MSI Wind U-100 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOPNP)
+	},
+	{
+		/*
+		 * No data is coming from the touchscreen unless KBC
+		 * is in legacy mode.
+		 */
+		/* Panasonic CF-29 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Medion Akoya E7225 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Medion"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Akoya E7225"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Microsoft Virtual Machine */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "VS2005R2"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Medion MAM 2070 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MAM 2070"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "5a"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* TUXEDO BU1406 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N24_25BU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* OQO Model 01 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "00"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "PEGATRON CORPORATION"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "C15B"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Acer Aspire 5 A515 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "PK"),
+			DMI_MATCH(DMI_BOARD_NAME, "Grumpy_PK"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOPNP)
+	},
+	{
+		/* ULI EV4873 - AUX LOOP does not work properly */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ULI"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EV4873"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "5a"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/*
+		 * Arima-Rioworks HDAMB -
+		 * AUX LOOP command does not raise AUX IRQ
+		 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "RIOWORKS"),
+			DMI_MATCH(DMI_BOARD_NAME, "HDAMB"),
+			DMI_MATCH(DMI_BOARD_VERSION, "Rev E"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	{
+		/* Sharp Actius MM20 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PC-MM20 Series"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/*
+		 * Sony Vaio FZ-240E -
+		 * reset and GET ID commands issued via KBD port are
+		 * sometimes being delivered to AUX3.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/*
+		 * Most (all?) VAIOs do not have external PS/2 ports nor
+		 * they implement active multiplexing properly, and
+		 * MUX discovery usually messes up keyboard/touchpad.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "VAIO"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/* Sony Vaio FS-115b */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FS115B"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		/*
+		 * Sony Vaio VGN-CS series require MUX or the touch sensor
+		 * buttons will disturb touchpad operation
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-CS"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCEMUX)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE C850D"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	/*
+	 * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+	 * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+	 * none of them have an external PS/2 port so this can safely be set for
+	 * all of them. These two are based on a Clevo design, but have the
+	 * board_name changed.
+	 */
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+			DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+			DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		/* Mivvy M310 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N10"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
+	},
+	/*
+	 * Some laptops need keyboard reset before probing for the trackpad to get
+	 * it detected, initialised & finally work.
+	 */
+	{
+		/* Schenker XMG C504 - Elantech touchpad */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "XMG"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "C504"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_KBDRESET)
+	},
+	{
+		/* Blue FB5601 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "blue"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "FB5601"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "M606"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
+	},
+	/*
+	 * Some TongFang barebones have touchpad and/or keyboard issues after
+	 * suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of
+	 * them have an external PS/2 port so this can safely be set for all of
+	 * them.
+	 * TongFang barebones come with board_vendor and/or system_vendor set to
+	 * a different value for each individual reseller. The only somewhat
+	 * universal way to identify them is by board_name.
+	 */
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "GM6XGxX"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "GMxXGxx"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "GMxXGxX"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "GMxHGxx"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "XxHP4NAx"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "XxKK4NAx_XxSP4NAx"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X5KK45xS_X5SP45xS"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X6KK45xU_X6SP45xU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "WUJIE Series-X5SP4NAG"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+	},
+	/*
+	 * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+	 * after suspend fixable with the forcenorestore quirk.
+	 * Clevo barebones come with board_vendor and/or system_vendor set to
+	 * either the very generic string "Notebook" and/or a different value
+	 * for each individual reseller. The only somewhat universal way to
+	 * identify them is by board_name.
+	 */
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "N150CU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NHxxRZQ"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	/*
+	 * At least one modern Clevo barebone has the touchpad connected both
+	 * via PS/2 and i2c interface. This causes a race condition between the
+	 * psmouse and i2c-hid driver. Since the full capability of the touchpad
+	 * is available via the i2c interface and the device has no external
+	 * PS/2 port, it is safe to just ignore all ps2 mouses here to avoid
+	 * this issue. The known affected device is the
+	 * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+	 * the two different dmi strings below. NS50MU is not a typo!
+	 */
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX |
+					SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX |
+					SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NS5x_7xPU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "P640RE"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		/*
+		 * This is only a partial board_name and might be followed by
+		 * another letter or number. DMI_MATCH however does do partial
+		 * matching.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "P65xH"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		/* Clevo P650RS, 650RP6, Sager NP8152-S, and others */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		/*
+		 * This is only a partial board_name and might be followed by
+		 * another letter or number. DMI_MATCH however does do partial
+		 * matching.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "P65_P67H"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		/*
+		 * This is only a partial board_name and might be followed by
+		 * another letter or number. DMI_MATCH however does do partial
+		 * matching.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RP"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		/*
+		 * This is only a partial board_name and might be followed by
+		 * another letter or number. DMI_MATCH however does do partial
+		 * matching.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RS"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		/*
+		 * This is only a partial board_name and might be followed by
+		 * another letter or number. DMI_MATCH however does do partial
+		 * matching.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "P67xRP"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PB51RF"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PB71RD"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PC70DR"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PCX0DX"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PCX0DX_GN20"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	/* See comment on TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU above */
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PD5x_7xPNP_PNR_PNN_PNT"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		/*
+		 * The Ayaneo Kun is a handheld device where some the buttons
+		 * are handled by an AT keyboard. The keyboard is usually
+		 * detected as raw, but sometimes, usually after a cold boot,
+		 * it is detected as translated. Make sure that the keyboard
+		 * is always in raw mode.
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AYANEO"),
+			DMI_MATCH(DMI_BOARD_NAME, "KUN"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DIRECT)
+	},
+	{ }
+};
+
+#ifdef CONFIG_PNP
+static const struct dmi_system_id i8042_dmi_laptop_table[] __initconst = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */
+		},
+	},
+	{ }
+};
+#endif
+
+#endif /* CONFIG_X86 */
+
+#ifdef CONFIG_PNP
+#include <linux/pnp.h>
+
+static bool i8042_pnp_kbd_registered;
+static unsigned int i8042_pnp_kbd_devices;
+static bool i8042_pnp_aux_registered;
+static unsigned int i8042_pnp_aux_devices;
+
+static int i8042_pnp_command_reg;
+static int i8042_pnp_data_reg;
+static int i8042_pnp_kbd_irq;
+static int i8042_pnp_aux_irq;
+
+static char i8042_pnp_kbd_name[32];
+static char i8042_pnp_aux_name[32];
+
+static void i8042_pnp_id_to_string(struct pnp_id *id, char *dst, int dst_size)
+{
+	strscpy(dst, "PNP:", dst_size);
+
+	while (id) {
+		strlcat(dst, " ", dst_size);
+		strlcat(dst, id->id, dst_size);
+		id = id->next;
+	}
+}
+
+static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *did)
+{
+	if (pnp_port_valid(dev, 0) && pnp_port_len(dev, 0) == 1)
+		i8042_pnp_data_reg = pnp_port_start(dev,0);
+
+	if (pnp_port_valid(dev, 1) && pnp_port_len(dev, 1) == 1)
+		i8042_pnp_command_reg = pnp_port_start(dev, 1);
+
+	if (pnp_irq_valid(dev,0))
+		i8042_pnp_kbd_irq = pnp_irq(dev, 0);
+
+	strscpy(i8042_pnp_kbd_name, did->id, sizeof(i8042_pnp_kbd_name));
+	if (strlen(pnp_dev_name(dev))) {
+		strlcat(i8042_pnp_kbd_name, ":", sizeof(i8042_pnp_kbd_name));
+		strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
+	}
+	i8042_pnp_id_to_string(dev->id, i8042_kbd_firmware_id,
+			       sizeof(i8042_kbd_firmware_id));
+	i8042_kbd_fwnode = dev_fwnode(&dev->dev);
+
+	/* Keyboard ports are always supposed to be wakeup-enabled */
+	device_set_wakeup_enable(&dev->dev, true);
+
+	i8042_pnp_kbd_devices++;
+	return 0;
+}
+
+static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id *did)
+{
+	if (pnp_port_valid(dev, 0) && pnp_port_len(dev, 0) == 1)
+		i8042_pnp_data_reg = pnp_port_start(dev,0);
+
+	if (pnp_port_valid(dev, 1) && pnp_port_len(dev, 1) == 1)
+		i8042_pnp_command_reg = pnp_port_start(dev, 1);
+
+	if (pnp_irq_valid(dev, 0))
+		i8042_pnp_aux_irq = pnp_irq(dev, 0);
+
+	strscpy(i8042_pnp_aux_name, did->id, sizeof(i8042_pnp_aux_name));
+	if (strlen(pnp_dev_name(dev))) {
+		strlcat(i8042_pnp_aux_name, ":", sizeof(i8042_pnp_aux_name));
+		strlcat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name));
+	}
+	i8042_pnp_id_to_string(dev->id, i8042_aux_firmware_id,
+			       sizeof(i8042_aux_firmware_id));
+
+	i8042_pnp_aux_devices++;
+	return 0;
+}
+
+static const struct pnp_device_id pnp_kbd_devids[] = {
+	{ .id = "PNP0300" },
+	{ .id = "PNP0301" },
+	{ .id = "PNP0302" },
+	{ .id = "PNP0303" },
+	{ .id = "PNP0304" },
+	{ .id = "PNP0305" },
+	{ .id = "PNP0306" },
+	{ .id = "PNP0309" },
+	{ .id = "PNP030a" },
+	{ .id = "PNP030b" },
+	{ .id = "PNP0320" },
+	{ .id = "PNP0343" },
+	{ .id = "PNP0344" },
+	{ .id = "PNP0345" },
+	{ .id = "CPQA0D7" },
+	{ }
+};
+MODULE_DEVICE_TABLE(pnp, pnp_kbd_devids);
+
+static struct pnp_driver i8042_pnp_kbd_driver = {
+	.name           = "i8042 kbd",
+	.id_table       = pnp_kbd_devids,
+	.probe          = i8042_pnp_kbd_probe,
+	.driver         = {
+		.probe_type = PROBE_FORCE_SYNCHRONOUS,
+		.suppress_bind_attrs = true,
+	},
+};
+
+static const struct pnp_device_id pnp_aux_devids[] = {
+	{ .id = "AUI0200" },
+	{ .id = "FJC6000" },
+	{ .id = "FJC6001" },
+	{ .id = "PNP0f03" },
+	{ .id = "PNP0f0b" },
+	{ .id = "PNP0f0e" },
+	{ .id = "PNP0f12" },
+	{ .id = "PNP0f13" },
+	{ .id = "PNP0f19" },
+	{ .id = "PNP0f1c" },
+	{ .id = "SYN0801" },
+	{ },
+};
+MODULE_DEVICE_TABLE(pnp, pnp_aux_devids);
+
+static struct pnp_driver i8042_pnp_aux_driver = {
+	.name           = "i8042 aux",
+	.id_table       = pnp_aux_devids,
+	.probe          = i8042_pnp_aux_probe,
+	.driver         = {
+		.probe_type = PROBE_FORCE_SYNCHRONOUS,
+		.suppress_bind_attrs = true,
+	},
+};
+
+static void i8042_pnp_exit(void)
+{
+	if (i8042_pnp_kbd_registered) {
+		i8042_pnp_kbd_registered = false;
+		pnp_unregister_driver(&i8042_pnp_kbd_driver);
+	}
+
+	if (i8042_pnp_aux_registered) {
+		i8042_pnp_aux_registered = false;
+		pnp_unregister_driver(&i8042_pnp_aux_driver);
+	}
+}
+
+static int __init i8042_pnp_init(void)
+{
+	char kbd_irq_str[4] = { 0 }, aux_irq_str[4] = { 0 };
+	bool pnp_data_busted = false;
+	int err;
+
+	if (i8042_nopnp) {
+		pr_info("PNP detection disabled\n");
+		return 0;
+	}
+
+	err = pnp_register_driver(&i8042_pnp_kbd_driver);
+	if (!err)
+		i8042_pnp_kbd_registered = true;
+
+	err = pnp_register_driver(&i8042_pnp_aux_driver);
+	if (!err)
+		i8042_pnp_aux_registered = true;
+
+	if (!i8042_pnp_kbd_devices && !i8042_pnp_aux_devices) {
+		i8042_pnp_exit();
+#if defined(__ia64__)
+		return -ENODEV;
+#else
+		pr_info("PNP: No PS/2 controller found.\n");
+#if defined(__loongarch__)
+		if (acpi_disabled == 0)
+			return -ENODEV;
+#else
+		if (x86_platform.legacy.i8042 !=
+				X86_LEGACY_I8042_EXPECTED_PRESENT)
+			return -ENODEV;
+#endif
+		pr_info("Probing ports directly.\n");
+		return 0;
+#endif
+	}
+
+	if (i8042_pnp_kbd_devices)
+		snprintf(kbd_irq_str, sizeof(kbd_irq_str),
+			"%d", i8042_pnp_kbd_irq);
+	if (i8042_pnp_aux_devices)
+		snprintf(aux_irq_str, sizeof(aux_irq_str),
+			"%d", i8042_pnp_aux_irq);
+
+	pr_info("PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n",
+		i8042_pnp_kbd_name, (i8042_pnp_kbd_devices && i8042_pnp_aux_devices) ? "," : "",
+		i8042_pnp_aux_name,
+		i8042_pnp_data_reg, i8042_pnp_command_reg,
+		kbd_irq_str, (i8042_pnp_kbd_devices && i8042_pnp_aux_devices) ? "," : "",
+		aux_irq_str);
+
+#if defined(__ia64__)
+	if (!i8042_pnp_kbd_devices)
+		i8042_nokbd = true;
+	if (!i8042_pnp_aux_devices)
+		i8042_noaux = true;
+#endif
+
+	if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) &&
+	      i8042_pnp_data_reg != i8042_data_reg) ||
+	    !i8042_pnp_data_reg) {
+		pr_warn("PNP: PS/2 controller has invalid data port %#x; using default %#x\n",
+			i8042_pnp_data_reg, i8042_data_reg);
+		i8042_pnp_data_reg = i8042_data_reg;
+		pnp_data_busted = true;
+	}
+
+	if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) &&
+	      i8042_pnp_command_reg != i8042_command_reg) ||
+	    !i8042_pnp_command_reg) {
+		pr_warn("PNP: PS/2 controller has invalid command port %#x; using default %#x\n",
+			i8042_pnp_command_reg, i8042_command_reg);
+		i8042_pnp_command_reg = i8042_command_reg;
+		pnp_data_busted = true;
+	}
+
+	if (!i8042_nokbd && !i8042_pnp_kbd_irq) {
+		pr_warn("PNP: PS/2 controller doesn't have KBD irq; using default %d\n",
+			i8042_kbd_irq);
+		i8042_pnp_kbd_irq = i8042_kbd_irq;
+		pnp_data_busted = true;
+	}
+
+	if (!i8042_noaux && !i8042_pnp_aux_irq) {
+		if (!pnp_data_busted && i8042_pnp_kbd_irq) {
+			pr_warn("PNP: PS/2 appears to have AUX port disabled, "
+				"if this is incorrect please boot with i8042.nopnp\n");
+			i8042_noaux = true;
+		} else {
+			pr_warn("PNP: PS/2 controller doesn't have AUX irq; using default %d\n",
+				i8042_aux_irq);
+			i8042_pnp_aux_irq = i8042_aux_irq;
+		}
+	}
+
+	i8042_data_reg = i8042_pnp_data_reg;
+	i8042_command_reg = i8042_pnp_command_reg;
+	i8042_kbd_irq = i8042_pnp_kbd_irq;
+	i8042_aux_irq = i8042_pnp_aux_irq;
+
+#ifdef CONFIG_X86
+	i8042_bypass_aux_irq_test = !pnp_data_busted &&
+				    dmi_check_system(i8042_dmi_laptop_table);
+#endif
+
+	return 0;
+}
+
+#else  /* !CONFIG_PNP */
+static inline int i8042_pnp_init(void) { return 0; }
+static inline void i8042_pnp_exit(void) { }
+#endif /* CONFIG_PNP */
+
+
+#ifdef CONFIG_X86
+static void __init i8042_check_quirks(void)
+{
+	const struct dmi_system_id *device_quirk_info;
+	uintptr_t quirks;
+
+	device_quirk_info = dmi_first_match(i8042_dmi_quirk_table);
+	if (!device_quirk_info)
+		return;
+
+	quirks = (uintptr_t)device_quirk_info->driver_data;
+
+	if (quirks & SERIO_QUIRK_NOKBD)
+		i8042_nokbd = true;
+	if (quirks & SERIO_QUIRK_NOAUX)
+		i8042_noaux = true;
+	if (quirks & SERIO_QUIRK_NOMUX)
+		i8042_nomux = true;
+	if (quirks & SERIO_QUIRK_FORCEMUX)
+		i8042_nomux = false;
+	if (quirks & SERIO_QUIRK_UNLOCK)
+		i8042_unlock = true;
+	if (quirks & SERIO_QUIRK_PROBE_DEFER)
+		i8042_probe_defer = true;
+	/* Honor module parameter when value is not default */
+	if (i8042_reset == I8042_RESET_DEFAULT) {
+		if (quirks & SERIO_QUIRK_RESET_ALWAYS)
+			i8042_reset = I8042_RESET_ALWAYS;
+		if (quirks & SERIO_QUIRK_RESET_NEVER)
+			i8042_reset = I8042_RESET_NEVER;
+	}
+	if (quirks & SERIO_QUIRK_DIRECT)
+		i8042_direct = true;
+	if (quirks & SERIO_QUIRK_DUMBKBD)
+		i8042_dumbkbd = true;
+	if (quirks & SERIO_QUIRK_NOLOOP)
+		i8042_noloop = true;
+	if (quirks & SERIO_QUIRK_NOTIMEOUT)
+		i8042_notimeout = true;
+	if (quirks & SERIO_QUIRK_KBDRESET)
+		i8042_kbdreset = true;
+	if (quirks & SERIO_QUIRK_DRITEK)
+		i8042_dritek = true;
+#ifdef CONFIG_PNP
+	if (quirks & SERIO_QUIRK_NOPNP)
+		i8042_nopnp = true;
+#endif
+	if (quirks & SERIO_QUIRK_FORCENORESTORE)
+		i8042_forcenorestore = true;
+}
+#else
+static inline void i8042_check_quirks(void) {}
+#endif
+
+static int __init i8042_platform_init(void)
+{
+	int retval;
+
+#ifdef CONFIG_X86
+	u8 a20_on = 0xdf;
+	/* Just return if platform does not have i8042 controller */
+	if (x86_platform.legacy.i8042 == X86_LEGACY_I8042_PLATFORM_ABSENT)
+		return -ENODEV;
+#endif
+
+/*
+ * On ix86 platforms touching the i8042 data register region can do really
+ * bad things. Because of this the region is always reserved on ix86 boxes.
+ *
+ *	if (!request_region(I8042_DATA_REG, 16, "i8042"))
+ *		return -EBUSY;
+ */
+
+	i8042_kbd_irq = I8042_MAP_IRQ(1);
+	i8042_aux_irq = I8042_MAP_IRQ(12);
+
+#if defined(__ia64__)
+	i8042_reset = I8042_RESET_ALWAYS;
+#endif
+
+	i8042_check_quirks();
+
+	pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+		i8042_nokbd ? " nokbd" : "",
+		i8042_noaux ? " noaux" : "",
+		i8042_nomux ? " nomux" : "",
+		i8042_unlock ? " unlock" : "",
+		i8042_probe_defer ? "probe_defer" : "",
+		i8042_reset == I8042_RESET_DEFAULT ?
+			"" : i8042_reset == I8042_RESET_ALWAYS ?
+				" reset_always" : " reset_never",
+		i8042_direct ? " direct" : "",
+		i8042_dumbkbd ? " dumbkbd" : "",
+		i8042_noloop ? " noloop" : "",
+		i8042_notimeout ? " notimeout" : "",
+		i8042_kbdreset ? " kbdreset" : "",
+#ifdef CONFIG_X86
+		i8042_dritek ? " dritek" : "",
+#else
+		"",
+#endif
+#ifdef CONFIG_PNP
+		i8042_nopnp ? " nopnp" : "",
+#else
+		"",
+#endif
+		i8042_forcenorestore ? " forcenorestore" : "");
+
+	retval = i8042_pnp_init();
+	if (retval)
+		return retval;
+
+#ifdef CONFIG_X86
+	/*
+	 * A20 was already enabled during early kernel init. But some buggy
+	 * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
+	 * resume from S3. So we do it here and hope that nothing breaks.
+	 */
+	i8042_command(&a20_on, 0x10d1);
+	i8042_command(NULL, 0x00ff);	/* Null command for SMM firmware */
+#endif /* CONFIG_X86 */
+
+	return retval;
+}
+
+static inline void i8042_platform_exit(void)
+{
+	i8042_pnp_exit();
+}
+
+#endif /* _I8042_ACPIPNPIO_H */
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
new file mode 100644
index 000000000..a8f4b2d70
--- /dev/null
+++ b/drivers/input/serio/i8042-io.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _I8042_IO_H
+#define _I8042_IO_H
+
+
+/*
+ * Names.
+ */
+
+#define I8042_KBD_PHYS_DESC "isa0060/serio0"
+#define I8042_AUX_PHYS_DESC "isa0060/serio1"
+#define I8042_MUX_PHYS_DESC "isa0060/serio%d"
+
+/*
+ * IRQs.
+ */
+
+#if defined(__arm__)
+/* defined in include/asm-arm/arch-xxx/irqs.h */
+#include <asm/irq.h>
+#elif defined(CONFIG_PPC)
+extern int of_i8042_kbd_irq;
+extern int of_i8042_aux_irq;
+# define I8042_KBD_IRQ  of_i8042_kbd_irq
+# define I8042_AUX_IRQ  of_i8042_aux_irq
+#else
+# define I8042_KBD_IRQ	1
+# define I8042_AUX_IRQ	12
+#endif
+
+
+/*
+ * Register numbers.
+ */
+
+#define I8042_COMMAND_REG	0x64
+#define I8042_STATUS_REG	0x64
+#define I8042_DATA_REG		0x60
+
+static inline int i8042_read_data(void)
+{
+	return inb(I8042_DATA_REG);
+}
+
+static inline int i8042_read_status(void)
+{
+	return inb(I8042_STATUS_REG);
+}
+
+static inline void i8042_write_data(int val)
+{
+	outb(val, I8042_DATA_REG);
+}
+
+static inline void i8042_write_command(int val)
+{
+	outb(val, I8042_COMMAND_REG);
+}
+
+static inline int i8042_platform_init(void)
+{
+/*
+ * On some platforms touching the i8042 data register region can do really
+ * bad things. Because of this the region is always reserved on such boxes.
+ */
+#if defined(CONFIG_PPC)
+	if (check_legacy_ioport(I8042_DATA_REG))
+		return -ENODEV;
+#endif
+#if !defined(__sh__) && !defined(__alpha__)
+	if (!request_region(I8042_DATA_REG, 16, "i8042"))
+		return -EBUSY;
+#endif
+
+	i8042_reset = I8042_RESET_ALWAYS;
+	return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+#if !defined(__sh__) && !defined(__alpha__)
+	release_region(I8042_DATA_REG, 16);
+#endif
+}
+
+#endif /* _I8042_IO_H */
diff --git a/drivers/input/serio/i8042-ip22io.h b/drivers/input/serio/i8042-ip22io.h
new file mode 100644
index 000000000..6c7efa017
--- /dev/null
+++ b/drivers/input/serio/i8042-ip22io.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _I8042_IP22_H
+#define _I8042_IP22_H
+
+#include <asm/sgi/ioc.h>
+#include <asm/sgi/ip22.h>
+
+
+/*
+ * Names.
+ */
+
+#define I8042_KBD_PHYS_DESC "hpc3ps2/serio0"
+#define I8042_AUX_PHYS_DESC "hpc3ps2/serio1"
+#define I8042_MUX_PHYS_DESC "hpc3ps2/serio%d"
+
+/*
+ * IRQs.
+ */
+
+#define I8042_KBD_IRQ SGI_KEYBD_IRQ
+#define I8042_AUX_IRQ SGI_KEYBD_IRQ
+
+/*
+ * Register numbers.
+ */
+
+#define I8042_COMMAND_REG	((unsigned long)&sgioc->kbdmouse.command)
+#define I8042_STATUS_REG	((unsigned long)&sgioc->kbdmouse.command)
+#define I8042_DATA_REG		((unsigned long)&sgioc->kbdmouse.data)
+
+static inline int i8042_read_data(void)
+{
+	return sgioc->kbdmouse.data;
+}
+
+static inline int i8042_read_status(void)
+{
+	return sgioc->kbdmouse.command;
+}
+
+static inline void i8042_write_data(int val)
+{
+	sgioc->kbdmouse.data = val;
+}
+
+static inline void i8042_write_command(int val)
+{
+	sgioc->kbdmouse.command = val;
+}
+
+static inline int i8042_platform_init(void)
+{
+#if 0
+	/* XXX sgi_kh is a virtual address */
+	if (!request_mem_region(sgi_kh, sizeof(struct hpc_keyb), "i8042"))
+		return -EBUSY;
+#endif
+
+	i8042_reset = I8042_RESET_ALWAYS;
+
+	return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+#if 0
+	release_mem_region(JAZZ_KEYBOARD_ADDRESS, sizeof(struct hpc_keyb));
+#endif
+}
+
+#endif /* _I8042_IP22_H */
diff --git a/drivers/input/serio/i8042-jazzio.h b/drivers/input/serio/i8042-jazzio.h
new file mode 100644
index 000000000..4c2a96f91
--- /dev/null
+++ b/drivers/input/serio/i8042-jazzio.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _I8042_JAZZ_H
+#define _I8042_JAZZ_H
+
+#include <asm/jazz.h>
+
+
+/*
+ * Names.
+ */
+
+#define I8042_KBD_PHYS_DESC "R4030/serio0"
+#define I8042_AUX_PHYS_DESC "R4030/serio1"
+#define I8042_MUX_PHYS_DESC "R4030/serio%d"
+
+/*
+ * IRQs.
+ */
+
+#define I8042_KBD_IRQ JAZZ_KEYBOARD_IRQ
+#define I8042_AUX_IRQ JAZZ_MOUSE_IRQ
+
+#define I8042_COMMAND_REG	((unsigned long)&jazz_kh->command)
+#define I8042_STATUS_REG	((unsigned long)&jazz_kh->command)
+#define I8042_DATA_REG		((unsigned long)&jazz_kh->data)
+
+static inline int i8042_read_data(void)
+{
+	return jazz_kh->data;
+}
+
+static inline int i8042_read_status(void)
+{
+	return jazz_kh->command;
+}
+
+static inline void i8042_write_data(int val)
+{
+	jazz_kh->data = val;
+}
+
+static inline void i8042_write_command(int val)
+{
+	jazz_kh->command = val;
+}
+
+static inline int i8042_platform_init(void)
+{
+#if 0
+	/* XXX JAZZ_KEYBOARD_ADDRESS is a virtual address */
+	if (!request_mem_region(JAZZ_KEYBOARD_ADDRESS, 2, "i8042"))
+		return -EBUSY;
+#endif
+
+	return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+#if 0
+	release_mem_region(JAZZ_KEYBOARD_ADDRESS, 2);
+#endif
+}
+
+#endif /* _I8042_JAZZ_H */
diff --git a/drivers/input/serio/i8042-snirm.h b/drivers/input/serio/i8042-snirm.h
new file mode 100644
index 000000000..4b7136704
--- /dev/null
+++ b/drivers/input/serio/i8042-snirm.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _I8042_SNIRM_H
+#define _I8042_SNIRM_H
+
+#include <asm/sni.h>
+
+
+/*
+ * Names.
+ */
+
+#define I8042_KBD_PHYS_DESC "onboard/serio0"
+#define I8042_AUX_PHYS_DESC "onboard/serio1"
+#define I8042_MUX_PHYS_DESC "onboard/serio%d"
+
+/*
+ * IRQs.
+ */
+static int i8042_kbd_irq;
+static int i8042_aux_irq;
+#define I8042_KBD_IRQ i8042_kbd_irq
+#define I8042_AUX_IRQ i8042_aux_irq
+
+static void __iomem *kbd_iobase;
+
+#define I8042_COMMAND_REG	(kbd_iobase + 0x64UL)
+#define I8042_DATA_REG		(kbd_iobase + 0x60UL)
+
+static inline int i8042_read_data(void)
+{
+	return readb(kbd_iobase + 0x60UL);
+}
+
+static inline int i8042_read_status(void)
+{
+	return readb(kbd_iobase + 0x64UL);
+}
+
+static inline void i8042_write_data(int val)
+{
+	writeb(val, kbd_iobase + 0x60UL);
+}
+
+static inline void i8042_write_command(int val)
+{
+	writeb(val, kbd_iobase + 0x64UL);
+}
+static inline int i8042_platform_init(void)
+{
+	/* RM200 is strange ... */
+	if (sni_brd_type == SNI_BRD_RM200) {
+		kbd_iobase = ioremap(0x16000000, 4);
+		i8042_kbd_irq = 33;
+		i8042_aux_irq = 44;
+	} else {
+		kbd_iobase = ioremap(0x14000000, 4);
+		i8042_kbd_irq = 1;
+		i8042_aux_irq = 12;
+	}
+	if (!kbd_iobase)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+
+}
+
+#endif /* _I8042_SNIRM_H */
diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
new file mode 100644
index 000000000..0f97158fd
--- /dev/null
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _I8042_SPARCIO_H
+#define _I8042_SPARCIO_H
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/oplib.h>
+#include <asm/prom.h>
+
+static int i8042_kbd_irq = -1;
+static int i8042_aux_irq = -1;
+#define I8042_KBD_IRQ i8042_kbd_irq
+#define I8042_AUX_IRQ i8042_aux_irq
+
+#define I8042_KBD_PHYS_DESC "sparcps2/serio0"
+#define I8042_AUX_PHYS_DESC "sparcps2/serio1"
+#define I8042_MUX_PHYS_DESC "sparcps2/serio%d"
+
+static void __iomem *kbd_iobase;
+
+#define I8042_COMMAND_REG	(kbd_iobase + 0x64UL)
+#define I8042_DATA_REG		(kbd_iobase + 0x60UL)
+
+static inline int i8042_read_data(void)
+{
+	return readb(kbd_iobase + 0x60UL);
+}
+
+static inline int i8042_read_status(void)
+{
+	return readb(kbd_iobase + 0x64UL);
+}
+
+static inline void i8042_write_data(int val)
+{
+	writeb(val, kbd_iobase + 0x60UL);
+}
+
+static inline void i8042_write_command(int val)
+{
+	writeb(val, kbd_iobase + 0x64UL);
+}
+
+#ifdef CONFIG_PCI
+
+static struct resource *kbd_res;
+
+#define OBP_PS2KBD_NAME1	"kb_ps2"
+#define OBP_PS2KBD_NAME2	"keyboard"
+#define OBP_PS2MS_NAME1		"kdmouse"
+#define OBP_PS2MS_NAME2		"mouse"
+
+static int sparc_i8042_probe(struct platform_device *op)
+{
+	struct device_node *dp;
+
+	for_each_child_of_node(op->dev.of_node, dp) {
+		if (of_node_name_eq(dp, OBP_PS2KBD_NAME1) ||
+		    of_node_name_eq(dp, OBP_PS2KBD_NAME2)) {
+			struct platform_device *kbd = of_find_device_by_node(dp);
+			unsigned int irq = kbd->archdata.irqs[0];
+			if (irq == 0xffffffff)
+				irq = op->archdata.irqs[0];
+			i8042_kbd_irq = irq;
+			kbd_iobase = of_ioremap(&kbd->resource[0],
+						0, 8, "kbd");
+			kbd_res = &kbd->resource[0];
+		} else if (of_node_name_eq(dp, OBP_PS2MS_NAME1) ||
+			   of_node_name_eq(dp, OBP_PS2MS_NAME2)) {
+			struct platform_device *ms = of_find_device_by_node(dp);
+			unsigned int irq = ms->archdata.irqs[0];
+			if (irq == 0xffffffff)
+				irq = op->archdata.irqs[0];
+			i8042_aux_irq = irq;
+		}
+	}
+
+	return 0;
+}
+
+static void sparc_i8042_remove(struct platform_device *op)
+{
+	of_iounmap(kbd_res, kbd_iobase, 8);
+}
+
+static const struct of_device_id sparc_i8042_match[] = {
+	{
+		.name = "8042",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, sparc_i8042_match);
+
+static struct platform_driver sparc_i8042_driver = {
+	.driver = {
+		.name = "i8042",
+		.of_match_table = sparc_i8042_match,
+	},
+	.probe		= sparc_i8042_probe,
+	.remove		= sparc_i8042_remove,
+};
+
+static bool i8042_is_mr_coffee(void)
+{
+	struct device_node *root __free(device_node) = of_find_node_by_path("/");
+	const char *name = of_get_property(root, "name", NULL);
+
+	return name && !strcmp(name, "SUNW,JavaStation-1");
+}
+
+static int __init i8042_platform_init(void)
+{
+	if (i8042_is_mr_coffee()) {
+		/* Hardcoded values for MrCoffee.  */
+		i8042_kbd_irq = i8042_aux_irq = 13 | 0x20;
+		kbd_iobase = ioremap(0x71300060, 8);
+		if (!kbd_iobase)
+			return -ENODEV;
+	} else {
+		int err = platform_driver_register(&sparc_i8042_driver);
+		if (err)
+			return err;
+
+		if (i8042_kbd_irq == -1 ||
+		    i8042_aux_irq == -1) {
+			if (kbd_iobase) {
+				of_iounmap(kbd_res, kbd_iobase, 8);
+				kbd_iobase = (void __iomem *) NULL;
+			}
+			return -ENODEV;
+		}
+	}
+
+	i8042_reset = I8042_RESET_ALWAYS;
+
+	return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+	if (!i8042_is_mr_coffee())
+		platform_driver_unregister(&sparc_i8042_driver);
+}
+
+#else /* !CONFIG_PCI */
+static int __init i8042_platform_init(void)
+{
+	return -ENODEV;
+}
+
+static inline void i8042_platform_exit(void)
+{
+}
+#endif /* !CONFIG_PCI */
+
+#endif /* _I8042_SPARCIO_H */
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
new file mode 100644
index 000000000..8bcce11cb
--- /dev/null
+++ b/drivers/input/serio/i8042.c
@@ -0,0 +1,1664 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  i8042 keyboard and mouse controller driver for Linux
+ *
+ *  Copyright (c) 1999-2004 Vojtech Pavlik
+ */
+
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/err.h>
+#include <linux/rcupdate.h>
+#include <linux/platform_device.h>
+#include <linux/i8042.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/property.h>
+
+#include <asm/io.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
+MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver");
+MODULE_LICENSE("GPL");
+
+static bool i8042_nokbd;
+module_param_named(nokbd, i8042_nokbd, bool, 0);
+MODULE_PARM_DESC(nokbd, "Do not probe or use KBD port.");
+
+static bool i8042_noaux;
+module_param_named(noaux, i8042_noaux, bool, 0);
+MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port.");
+
+static bool i8042_nomux;
+module_param_named(nomux, i8042_nomux, bool, 0);
+MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing controller is present.");
+
+static bool i8042_unlock;
+module_param_named(unlock, i8042_unlock, bool, 0);
+MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
+
+static bool i8042_probe_defer;
+module_param_named(probe_defer, i8042_probe_defer, bool, 0);
+MODULE_PARM_DESC(probe_defer, "Allow deferred probing.");
+
+enum i8042_controller_reset_mode {
+	I8042_RESET_NEVER,
+	I8042_RESET_ALWAYS,
+	I8042_RESET_ON_S2RAM,
+#define I8042_RESET_DEFAULT	I8042_RESET_ON_S2RAM
+};
+static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT;
+static int i8042_set_reset(const char *val, const struct kernel_param *kp)
+{
+	enum i8042_controller_reset_mode *arg = kp->arg;
+	int error;
+	bool reset;
+
+	if (val) {
+		error = kstrtobool(val, &reset);
+		if (error)
+			return error;
+	} else {
+		reset = true;
+	}
+
+	*arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER;
+	return 0;
+}
+
+static const struct kernel_param_ops param_ops_reset_param = {
+	.flags = KERNEL_PARAM_OPS_FL_NOARG,
+	.set = i8042_set_reset,
+};
+#define param_check_reset_param(name, p)	\
+	__param_check(name, p, enum i8042_controller_reset_mode)
+module_param_named(reset, i8042_reset, reset_param, 0);
+MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both");
+
+static bool i8042_direct;
+module_param_named(direct, i8042_direct, bool, 0);
+MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode.");
+
+static bool i8042_dumbkbd;
+module_param_named(dumbkbd, i8042_dumbkbd, bool, 0);
+MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard");
+
+static bool i8042_noloop;
+module_param_named(noloop, i8042_noloop, bool, 0);
+MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port");
+
+static bool i8042_notimeout;
+module_param_named(notimeout, i8042_notimeout, bool, 0);
+MODULE_PARM_DESC(notimeout, "Ignore timeouts signalled by i8042");
+
+static bool i8042_kbdreset;
+module_param_named(kbdreset, i8042_kbdreset, bool, 0);
+MODULE_PARM_DESC(kbdreset, "Reset device connected to KBD port");
+
+#ifdef CONFIG_X86
+static bool i8042_dritek;
+module_param_named(dritek, i8042_dritek, bool, 0);
+MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension");
+#endif
+
+#ifdef CONFIG_PNP
+static bool i8042_nopnp;
+module_param_named(nopnp, i8042_nopnp, bool, 0);
+MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
+#endif
+
+static bool i8042_forcenorestore;
+module_param_named(forcenorestore, i8042_forcenorestore, bool, 0);
+MODULE_PARM_DESC(forcenorestore, "Force no restore on s3 resume, copying s2idle behaviour");
+
+#define DEBUG
+#ifdef DEBUG
+static bool i8042_debug;
+module_param_named(debug, i8042_debug, bool, 0600);
+MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off");
+
+static bool i8042_unmask_kbd_data;
+module_param_named(unmask_kbd_data, i8042_unmask_kbd_data, bool, 0600);
+MODULE_PARM_DESC(unmask_kbd_data, "Unconditional enable (may reveal sensitive data) of normally sanitize-filtered kbd data traffic debug log [pre-condition: i8042.debug=1 enabled]");
+#endif
+
+static bool i8042_present;
+static bool i8042_bypass_aux_irq_test;
+static char i8042_kbd_firmware_id[128];
+static char i8042_aux_firmware_id[128];
+static struct fwnode_handle *i8042_kbd_fwnode;
+
+#include "i8042.h"
+
+/*
+ * i8042_lock protects serialization between i8042_command and
+ * the interrupt handler.
+ */
+static DEFINE_SPINLOCK(i8042_lock);
+
+/*
+ * Writers to AUX and KBD ports as well as users issuing i8042_command
+ * directly should acquire i8042_mutex (by means of calling
+ * i8042_lock_chip() and i8042_unlock_chip() helpers) to ensure that
+ * they do not disturb each other (unfortunately in many i8042
+ * implementations write to one of the ports will immediately abort
+ * command that is being processed by another port).
+ */
+static DEFINE_MUTEX(i8042_mutex);
+
+struct i8042_port {
+	struct serio *serio;
+	int irq;
+	bool exists;
+	bool driver_bound;
+	signed char mux;
+};
+
+#define I8042_KBD_PORT_NO	0
+#define I8042_AUX_PORT_NO	1
+#define I8042_MUX_PORT_NO	2
+#define I8042_NUM_PORTS		(I8042_NUM_MUX_PORTS + 2)
+
+static struct i8042_port i8042_ports[I8042_NUM_PORTS];
+
+static unsigned char i8042_initial_ctr;
+static unsigned char i8042_ctr;
+static bool i8042_mux_present;
+static bool i8042_kbd_irq_registered;
+static bool i8042_aux_irq_registered;
+static unsigned char i8042_suppress_kbd_ack;
+static struct platform_device *i8042_platform_device;
+static struct notifier_block i8042_kbd_bind_notifier_block;
+
+static bool i8042_handle_data(int irq);
+static i8042_filter_t i8042_platform_filter;
+static void *i8042_platform_filter_context;
+
+void i8042_lock_chip(void)
+{
+	mutex_lock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_lock_chip);
+
+void i8042_unlock_chip(void)
+{
+	mutex_unlock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_unlock_chip);
+
+int i8042_install_filter(i8042_filter_t filter, void *context)
+{
+	guard(spinlock_irqsave)(&i8042_lock);
+
+	if (i8042_platform_filter)
+		return -EBUSY;
+
+	i8042_platform_filter = filter;
+	i8042_platform_filter_context = context;
+	return 0;
+}
+EXPORT_SYMBOL(i8042_install_filter);
+
+int i8042_remove_filter(i8042_filter_t filter)
+{
+	guard(spinlock_irqsave)(&i8042_lock);
+
+	if (i8042_platform_filter != filter)
+		return -EINVAL;
+
+	i8042_platform_filter = NULL;
+	i8042_platform_filter_context = NULL;
+	return 0;
+}
+EXPORT_SYMBOL(i8042_remove_filter);
+
+/*
+ * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
+ * be ready for reading values from it / writing values to it.
+ * Called always with i8042_lock held.
+ */
+
+static int i8042_wait_read(void)
+{
+	int i = 0;
+
+	while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) {
+		udelay(50);
+		i++;
+	}
+	return -(i == I8042_CTL_TIMEOUT);
+}
+
+static int i8042_wait_write(void)
+{
+	int i = 0;
+
+	while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) {
+		udelay(50);
+		i++;
+	}
+	return -(i == I8042_CTL_TIMEOUT);
+}
+
+/*
+ * i8042_flush() flushes all data that may be in the keyboard and mouse buffers
+ * of the i8042 down the toilet.
+ */
+
+static int i8042_flush(void)
+{
+	unsigned char data, str;
+	int count = 0;
+
+	guard(spinlock_irqsave)(&i8042_lock);
+
+	while ((str = i8042_read_status()) & I8042_STR_OBF) {
+		if (count++ >= I8042_BUFFER_SIZE)
+			return -EIO;
+
+		udelay(50);
+		data = i8042_read_data();
+		dbg("%02x <- i8042 (flush, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+	}
+
+	return 0;
+}
+
+/*
+ * i8042_command() executes a command on the i8042. It also sends the input
+ * parameter(s) of the commands to it, and receives the output value(s). The
+ * parameters are to be stored in the param array, and the output is placed
+ * into the same array. The number of the parameters and output values is
+ * encoded in bits 8-11 of the command number.
+ */
+
+static int __i8042_command(unsigned char *param, int command)
+{
+	int i, error;
+
+	if (i8042_noloop && command == I8042_CMD_AUX_LOOP)
+		return -1;
+
+	error = i8042_wait_write();
+	if (error)
+		return error;
+
+	dbg("%02x -> i8042 (command)\n", command & 0xff);
+	i8042_write_command(command & 0xff);
+
+	for (i = 0; i < ((command >> 12) & 0xf); i++) {
+		error = i8042_wait_write();
+		if (error) {
+			dbg("     -- i8042 (wait write timeout)\n");
+			return error;
+		}
+		dbg("%02x -> i8042 (parameter)\n", param[i]);
+		i8042_write_data(param[i]);
+	}
+
+	for (i = 0; i < ((command >> 8) & 0xf); i++) {
+		error = i8042_wait_read();
+		if (error) {
+			dbg("     -- i8042 (wait read timeout)\n");
+			return error;
+		}
+
+		if (command == I8042_CMD_AUX_LOOP &&
+		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
+			dbg("     -- i8042 (auxerr)\n");
+			return -1;
+		}
+
+		param[i] = i8042_read_data();
+		dbg("%02x <- i8042 (return)\n", param[i]);
+	}
+
+	return 0;
+}
+
+int i8042_command(unsigned char *param, int command)
+{
+	if (!i8042_present)
+		return -1;
+
+	guard(spinlock_irqsave)(&i8042_lock);
+
+	return __i8042_command(param, command);
+}
+EXPORT_SYMBOL(i8042_command);
+
+/*
+ * i8042_kbd_write() sends a byte out through the keyboard interface.
+ */
+
+static int i8042_kbd_write(struct serio *port, unsigned char c)
+{
+	int error;
+
+	guard(spinlock_irqsave)(&i8042_lock);
+
+	error = i8042_wait_write();
+	if (error)
+		return error;
+
+	dbg("%02x -> i8042 (kbd-data)\n", c);
+	i8042_write_data(c);
+
+	return 0;
+}
+
+/*
+ * i8042_aux_write() sends a byte out through the aux interface.
+ */
+
+static int i8042_aux_write(struct serio *serio, unsigned char c)
+{
+	struct i8042_port *port = serio->port_data;
+
+	return i8042_command(&c, port->mux == -1 ?
+					I8042_CMD_AUX_SEND :
+					I8042_CMD_MUX_SEND + port->mux);
+}
+
+
+/*
+ * i8042_port_close attempts to clear AUX or KBD port state by disabling
+ * and then re-enabling it.
+ */
+
+static void i8042_port_close(struct serio *serio)
+{
+	int irq_bit;
+	int disable_bit;
+	const char *port_name;
+
+	if (serio == i8042_ports[I8042_AUX_PORT_NO].serio) {
+		irq_bit = I8042_CTR_AUXINT;
+		disable_bit = I8042_CTR_AUXDIS;
+		port_name = "AUX";
+	} else {
+		irq_bit = I8042_CTR_KBDINT;
+		disable_bit = I8042_CTR_KBDDIS;
+		port_name = "KBD";
+	}
+
+	i8042_ctr &= ~irq_bit;
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		pr_warn("Can't write CTR while closing %s port\n", port_name);
+
+	udelay(50);
+
+	i8042_ctr &= ~disable_bit;
+	i8042_ctr |= irq_bit;
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		pr_err("Can't reactivate %s port\n", port_name);
+
+	/*
+	 * See if there is any data appeared while we were messing with
+	 * port state.
+	 */
+	i8042_handle_data(0);
+}
+
+/*
+ * i8042_start() is called by serio core when port is about to finish
+ * registering. It will mark port as existing so i8042_interrupt can
+ * start sending data through it.
+ */
+static int i8042_start(struct serio *serio)
+{
+	struct i8042_port *port = serio->port_data;
+
+	device_set_wakeup_capable(&serio->dev, true);
+
+	/*
+	 * On platforms using suspend-to-idle, allow the keyboard to
+	 * wake up the system from sleep by enabling keyboard wakeups
+	 * by default.  This is consistent with keyboard wakeup
+	 * behavior on many platforms using suspend-to-RAM (ACPI S3)
+	 * by default.
+	 */
+	if (pm_suspend_default_s2idle() &&
+	    serio == i8042_ports[I8042_KBD_PORT_NO].serio) {
+		device_set_wakeup_enable(&serio->dev, true);
+	}
+
+	guard(spinlock_irq)(&i8042_lock);
+	port->exists = true;
+
+	return 0;
+}
+
+/*
+ * i8042_stop() marks serio port as non-existing so i8042_interrupt
+ * will not try to send data to the port that is about to go away.
+ * The function is called by serio core as part of unregister procedure.
+ */
+static void i8042_stop(struct serio *serio)
+{
+	struct i8042_port *port = serio->port_data;
+
+	scoped_guard(spinlock_irq, &i8042_lock) {
+		port->exists = false;
+		port->serio = NULL;
+	}
+
+	/*
+	 * We need to make sure that interrupt handler finishes using
+	 * our serio port before we return from this function.
+	 * We synchronize with both AUX and KBD IRQs because there is
+	 * a (very unlikely) chance that AUX IRQ is raised for KBD port
+	 * and vice versa.
+	 */
+	synchronize_irq(I8042_AUX_IRQ);
+	synchronize_irq(I8042_KBD_IRQ);
+}
+
+/*
+ * i8042_filter() filters out unwanted bytes from the input data stream.
+ * It is called from i8042_interrupt and thus is running with interrupts
+ * off and i8042_lock held.
+ */
+static bool i8042_filter(unsigned char data, unsigned char str,
+			 struct serio *serio)
+{
+	if (unlikely(i8042_suppress_kbd_ack)) {
+		if ((~str & I8042_STR_AUXDATA) &&
+		    (data == 0xfa || data == 0xfe)) {
+			i8042_suppress_kbd_ack--;
+			dbg("Extra keyboard ACK - filtered out\n");
+			return true;
+		}
+	}
+
+	if (!i8042_platform_filter)
+		return false;
+
+	if (i8042_platform_filter(data, str, serio, i8042_platform_filter_context)) {
+		dbg("Filtered out by platform filter\n");
+		return true;
+	}
+
+	return false;
+}
+
+/*
+ * i8042_handle_mux() handles case when data is coming from one of
+ * the multiplexed ports. It would be simple if not for quirks with
+ * handling errors:
+ *
+ * When MUXERR condition is signalled the data register can only contain
+ * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
+ * it is not always the case. Some KBCs also report 0xfc when there is
+ * nothing connected to the port while others sometimes get confused which
+ * port the data came from and signal error leaving the data intact. They
+ * _do not_ revert to legacy mode (actually I've never seen KBC reverting
+ * to legacy mode yet, when we see one we'll add proper handling).
+ * Anyway, we process 0xfc, 0xfd, 0xfe and 0xff as timeouts, and for the
+ * rest assume that the data came from the same serio last byte
+ * was transmitted (if transmission happened not too long ago).
+ */
+static int i8042_handle_mux(u8 str, u8 *data, unsigned int *dfl)
+{
+	static unsigned long last_transmit;
+	static unsigned long last_port;
+	unsigned int mux_port;
+
+	mux_port = (str >> 6) & 3;
+	*dfl = 0;
+
+	if (str & I8042_STR_MUXERR) {
+		dbg("MUX error, status is %02x, data is %02x\n",
+		    str, *data);
+
+		switch (*data) {
+		default:
+			if (time_before(jiffies, last_transmit + HZ/10)) {
+				mux_port = last_port;
+				break;
+			}
+			fallthrough;	/* report timeout */
+		case 0xfc:
+		case 0xfd:
+		case 0xfe:
+			*dfl = SERIO_TIMEOUT;
+			*data = 0xfe;
+			break;
+		case 0xff:
+			*dfl = SERIO_PARITY;
+			*data = 0xfe;
+			break;
+		}
+	}
+
+	last_port = mux_port;
+	last_transmit = jiffies;
+
+	return I8042_MUX_PORT_NO + mux_port;
+}
+
+/*
+ * i8042_handle_data() is the most important function in this driver -
+ * it reads the data from the i8042, determines its destination serio
+ * port, and sends received byte to the upper layers.
+ *
+ * Returns true if there was data waiting, false otherwise.
+ */
+static bool i8042_handle_data(int irq)
+{
+	struct i8042_port *port;
+	struct serio *serio;
+	unsigned char str, data;
+	unsigned int dfl;
+	unsigned int port_no;
+	bool filtered;
+
+	scoped_guard(spinlock_irqsave, &i8042_lock) {
+		str = i8042_read_status();
+		if (unlikely(~str & I8042_STR_OBF))
+			return false;
+
+		data = i8042_read_data();
+
+		if (i8042_mux_present && (str & I8042_STR_AUXDATA)) {
+			port_no = i8042_handle_mux(str, &data, &dfl);
+		} else {
+
+			dfl = (str & I8042_STR_PARITY) ? SERIO_PARITY : 0;
+			if ((str & I8042_STR_TIMEOUT) && !i8042_notimeout)
+				dfl |= SERIO_TIMEOUT;
+
+			port_no = (str & I8042_STR_AUXDATA) ?
+					I8042_AUX_PORT_NO : I8042_KBD_PORT_NO;
+		}
+
+		port = &i8042_ports[port_no];
+		serio = port->exists ? port->serio : NULL;
+
+		filter_dbg(port->driver_bound,
+			   data, "<- i8042 (interrupt, %d, %d%s%s)\n",
+			   port_no, irq,
+			   dfl & SERIO_PARITY ? ", bad parity" : "",
+			   dfl & SERIO_TIMEOUT ? ", timeout" : "");
+
+		filtered = i8042_filter(data, str, serio);
+	}
+
+	if (likely(serio && !filtered))
+		serio_interrupt(serio, data, dfl);
+
+	return true;
+}
+
+static irqreturn_t i8042_interrupt(int irq, void *dev_id)
+{
+	if (unlikely(!i8042_handle_data(irq))) {
+		dbg("Interrupt %d, without any data\n", irq);
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * i8042_enable_kbd_port enables keyboard port on chip
+ */
+
+static int i8042_enable_kbd_port(void)
+{
+	i8042_ctr &= ~I8042_CTR_KBDDIS;
+	i8042_ctr |= I8042_CTR_KBDINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		i8042_ctr &= ~I8042_CTR_KBDINT;
+		i8042_ctr |= I8042_CTR_KBDDIS;
+		pr_err("Failed to enable KBD port\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * i8042_enable_aux_port enables AUX (mouse) port on chip
+ */
+
+static int i8042_enable_aux_port(void)
+{
+	i8042_ctr &= ~I8042_CTR_AUXDIS;
+	i8042_ctr |= I8042_CTR_AUXINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		i8042_ctr &= ~I8042_CTR_AUXINT;
+		i8042_ctr |= I8042_CTR_AUXDIS;
+		pr_err("Failed to enable AUX port\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * i8042_enable_mux_ports enables 4 individual AUX ports after
+ * the controller has been switched into Multiplexed mode
+ */
+
+static int i8042_enable_mux_ports(void)
+{
+	unsigned char param;
+	int i;
+
+	for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
+		i8042_command(&param, I8042_CMD_MUX_PFX + i);
+		i8042_command(&param, I8042_CMD_AUX_ENABLE);
+	}
+
+	return i8042_enable_aux_port();
+}
+
+/*
+ * i8042_set_mux_mode checks whether the controller has an
+ * active multiplexor and puts the chip into Multiplexed (true)
+ * or Legacy (false) mode.
+ */
+
+static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version)
+{
+
+	unsigned char param, val;
+/*
+ * Get rid of bytes in the queue.
+ */
+
+	i8042_flush();
+
+/*
+ * Internal loopback test - send three bytes, they should come back from the
+ * mouse interface, the last should be version.
+ */
+
+	param = val = 0xf0;
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != val)
+		return -1;
+	param = val = multiplex ? 0x56 : 0xf6;
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != val)
+		return -1;
+	param = val = multiplex ? 0xa4 : 0xa5;
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == val)
+		return -1;
+
+/*
+ * Workaround for interference with USB Legacy emulation
+ * that causes a v10.12 MUX to be found.
+ */
+	if (param == 0xac)
+		return -1;
+
+	if (mux_version)
+		*mux_version = param;
+
+	return 0;
+}
+
+/*
+ * i8042_check_mux() checks whether the controller supports the PS/2 Active
+ * Multiplexing specification by Synaptics, Phoenix, Insyde and
+ * LCS/Telegraphics.
+ */
+
+static int i8042_check_mux(void)
+{
+	unsigned char mux_version;
+
+	if (i8042_set_mux_mode(true, &mux_version))
+		return -1;
+
+	pr_info("Detected active multiplexing controller, rev %d.%d\n",
+		(mux_version >> 4) & 0xf, mux_version & 0xf);
+
+/*
+ * Disable all muxed ports by disabling AUX.
+ */
+	i8042_ctr |= I8042_CTR_AUXDIS;
+	i8042_ctr &= ~I8042_CTR_AUXINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		pr_err("Failed to disable AUX port, can't use MUX\n");
+		return -EIO;
+	}
+
+	i8042_mux_present = true;
+
+	return 0;
+}
+
+/*
+ * The following is used to test AUX IRQ delivery.
+ */
+static struct completion i8042_aux_irq_delivered;
+static bool i8042_irq_being_tested;
+
+static irqreturn_t i8042_aux_test_irq(int irq, void *dev_id)
+{
+	unsigned char str, data;
+
+	guard(spinlock_irqsave)(&i8042_lock);
+
+	str = i8042_read_status();
+	if (!(str & I8042_STR_OBF))
+		return IRQ_NONE;
+
+	data = i8042_read_data();
+	dbg("%02x <- i8042 (aux_test_irq, %s)\n",
+	    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+
+	if (i8042_irq_being_tested && data == 0xa5 && (str & I8042_STR_AUXDATA))
+		complete(&i8042_aux_irq_delivered);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * i8042_toggle_aux - enables or disables AUX port on i8042 via command and
+ * verifies success by readinng CTR. Used when testing for presence of AUX
+ * port.
+ */
+static int i8042_toggle_aux(bool on)
+{
+	unsigned char param;
+	int i;
+
+	if (i8042_command(&param,
+			on ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE))
+		return -1;
+
+	/* some chips need some time to set the I8042_CTR_AUXDIS bit */
+	for (i = 0; i < 100; i++) {
+		udelay(50);
+
+		if (i8042_command(&param, I8042_CMD_CTL_RCTR))
+			return -1;
+
+		if (!(param & I8042_CTR_AUXDIS) == on)
+			return 0;
+	}
+
+	return -1;
+}
+
+/*
+ * i8042_check_aux() applies as much paranoia as it can at detecting
+ * the presence of an AUX interface.
+ */
+
+static int i8042_check_aux(void)
+{
+	int retval = -1;
+	bool irq_registered = false;
+	bool aux_loop_broken = false;
+	unsigned char param;
+
+/*
+ * Get rid of bytes in the queue.
+ */
+
+	i8042_flush();
+
+/*
+ * Internal loopback test - filters out AT-type i8042's. Unfortunately
+ * SiS screwed up and their 5597 doesn't support the LOOP command even
+ * though it has an AUX port.
+ */
+
+	param = 0x5a;
+	retval = i8042_command(&param, I8042_CMD_AUX_LOOP);
+	if (retval || param != 0x5a) {
+
+/*
+ * External connection test - filters out AT-soldered PS/2 i8042's
+ * 0x00 - no error, 0x01-0x03 - clock/data stuck, 0xff - general error
+ * 0xfa - no error on some notebooks which ignore the spec
+ * Because it's common for chipsets to return error on perfectly functioning
+ * AUX ports, we test for this only when the LOOP command failed.
+ */
+
+		if (i8042_command(&param, I8042_CMD_AUX_TEST) ||
+		    (param && param != 0xfa && param != 0xff))
+			return -1;
+
+/*
+ * If AUX_LOOP completed without error but returned unexpected data
+ * mark it as broken
+ */
+		if (!retval)
+			aux_loop_broken = true;
+	}
+
+/*
+ * Bit assignment test - filters out PS/2 i8042's in AT mode
+ */
+
+	if (i8042_toggle_aux(false)) {
+		pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
+		pr_warn("If AUX port is really absent please use the 'i8042.noaux' option\n");
+	}
+
+	if (i8042_toggle_aux(true))
+		return -1;
+
+/*
+ * Reset keyboard (needed on some laptops to successfully detect
+ * touchpad, e.g., some Gigabyte laptop models with Elantech
+ * touchpads).
+ */
+	if (i8042_kbdreset) {
+		pr_warn("Attempting to reset device connected to KBD port\n");
+		i8042_kbd_write(NULL, (unsigned char) 0xff);
+	}
+
+/*
+ * Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and
+ * used it for a PCI card or somethig else.
+ */
+
+	if (i8042_noloop || i8042_bypass_aux_irq_test || aux_loop_broken) {
+/*
+ * Without LOOP command we can't test AUX IRQ delivery. Assume the port
+ * is working and hope we are right.
+ */
+		retval = 0;
+		goto out;
+	}
+
+	if (request_irq(I8042_AUX_IRQ, i8042_aux_test_irq, IRQF_SHARED,
+			"i8042", i8042_platform_device))
+		goto out;
+
+	irq_registered = true;
+
+	if (i8042_enable_aux_port())
+		goto out;
+
+	scoped_guard(spinlock_irqsave, &i8042_lock) {
+		init_completion(&i8042_aux_irq_delivered);
+		i8042_irq_being_tested = true;
+
+		param = 0xa5;
+		retval = __i8042_command(&param, I8042_CMD_AUX_LOOP & 0xf0ff);
+		if (retval)
+			goto out;
+	}
+
+	if (wait_for_completion_timeout(&i8042_aux_irq_delivered,
+					msecs_to_jiffies(250)) == 0) {
+/*
+ * AUX IRQ was never delivered so we need to flush the controller to
+ * get rid of the byte we put there; otherwise keyboard may not work.
+ */
+		dbg("     -- i8042 (aux irq test timeout)\n");
+		i8042_flush();
+		retval = -1;
+	}
+
+ out:
+
+/*
+ * Disable the interface.
+ */
+
+	i8042_ctr |= I8042_CTR_AUXDIS;
+	i8042_ctr &= ~I8042_CTR_AUXINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		retval = -1;
+
+	if (irq_registered)
+		free_irq(I8042_AUX_IRQ, i8042_platform_device);
+
+	return retval;
+}
+
+static int i8042_controller_check(void)
+{
+	if (i8042_flush()) {
+		pr_info("No controller found\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int i8042_controller_selftest(void)
+{
+	unsigned char param;
+	int i = 0;
+
+	/*
+	 * We try this 5 times; on some really fragile systems this does not
+	 * take the first time...
+	 */
+	do {
+
+		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
+			pr_err("i8042 controller selftest timeout\n");
+			return -ENODEV;
+		}
+
+		if (param == I8042_RET_CTL_TEST)
+			return 0;
+
+		dbg("i8042 controller selftest: %#x != %#x\n",
+		    param, I8042_RET_CTL_TEST);
+		msleep(50);
+	} while (i++ < 5);
+
+#ifdef CONFIG_X86
+	/*
+	 * On x86, we don't fail entire i8042 initialization if controller
+	 * reset fails in hopes that keyboard port will still be functional
+	 * and user will still get a working keyboard. This is especially
+	 * important on netbooks. On other arches we trust hardware more.
+	 */
+	pr_info("giving up on controller selftest, continuing anyway...\n");
+	return 0;
+#else
+	pr_err("i8042 controller selftest failed\n");
+	return -EIO;
+#endif
+}
+
+/*
+ * i8042_controller_init initializes the i8042 controller, and,
+ * most importantly, sets it into non-xlated mode if that's
+ * desired.
+ */
+
+static int i8042_controller_init(void)
+{
+	int n = 0;
+	unsigned char ctr[2];
+
+/*
+ * Save the CTR for restore on unload / reboot.
+ */
+
+	do {
+		if (n >= 10) {
+			pr_err("Unable to get stable CTR read\n");
+			return -EIO;
+		}
+
+		if (n != 0)
+			udelay(50);
+
+		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
+			pr_err("Can't read CTR while initializing i8042\n");
+			return i8042_probe_defer ? -EPROBE_DEFER : -EIO;
+		}
+
+	} while (n < 2 || ctr[0] != ctr[1]);
+
+	i8042_initial_ctr = i8042_ctr = ctr[0];
+
+/*
+ * Disable the keyboard interface and interrupt.
+ */
+
+	i8042_ctr |= I8042_CTR_KBDDIS;
+	i8042_ctr &= ~I8042_CTR_KBDINT;
+
+/*
+ * Handle keylock.
+ */
+
+	scoped_guard(spinlock_irqsave, &i8042_lock) {
+		if (~i8042_read_status() & I8042_STR_KEYLOCK) {
+			if (i8042_unlock)
+				i8042_ctr |= I8042_CTR_IGNKEYLOCK;
+			else
+				pr_warn("Warning: Keylock active\n");
+		}
+	}
+
+/*
+ * If the chip is configured into nontranslated mode by the BIOS, don't
+ * bother enabling translating and be happy.
+ */
+
+	if (~i8042_ctr & I8042_CTR_XLATE)
+		i8042_direct = true;
+
+/*
+ * Set nontranslated mode for the kbd interface if requested by an option.
+ * After this the kbd interface becomes a simple serial in/out, like the aux
+ * interface is. We don't do this by default, since it can confuse notebook
+ * BIOSes.
+ */
+
+	if (i8042_direct)
+		i8042_ctr &= ~I8042_CTR_XLATE;
+
+/*
+ * Write CTR back.
+ */
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		pr_err("Can't write CTR while initializing i8042\n");
+		return -EIO;
+	}
+
+/*
+ * Flush whatever accumulated while we were disabling keyboard port.
+ */
+
+	i8042_flush();
+
+	return 0;
+}
+
+
+/*
+ * Reset the controller and reset CRT to the original value set by BIOS.
+ */
+
+static void i8042_controller_reset(bool s2r_wants_reset)
+{
+	i8042_flush();
+
+/*
+ * Disable both KBD and AUX interfaces so they don't get in the way
+ */
+
+	i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS;
+	i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		pr_warn("Can't write CTR while resetting\n");
+
+/*
+ * Disable MUX mode if present.
+ */
+
+	if (i8042_mux_present)
+		i8042_set_mux_mode(false, NULL);
+
+/*
+ * Reset the controller if requested.
+ */
+
+	if (i8042_reset == I8042_RESET_ALWAYS ||
+	    (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
+		i8042_controller_selftest();
+	}
+
+/*
+ * Restore the original control register setting.
+ */
+
+	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
+		pr_warn("Can't restore CTR\n");
+}
+
+
+/*
+ * i8042_panic_blink() will turn the keyboard LEDs on or off and is called
+ * when kernel panics. Flashing LEDs is useful for users running X who may
+ * not see the console and will help distinguishing panics from "real"
+ * lockups.
+ *
+ * Note that DELAY has a limit of 10ms so we will not get stuck here
+ * waiting for KBC to free up even if KBD interrupt is off
+ */
+
+#define DELAY do { mdelay(1); if (++delay > 10) return delay; } while(0)
+
+static long i8042_panic_blink(int state)
+{
+	long delay = 0;
+	char led;
+
+	led = (state) ? 0x01 | 0x04 : 0;
+	while (i8042_read_status() & I8042_STR_IBF)
+		DELAY;
+	dbg("%02x -> i8042 (panic blink)\n", 0xed);
+	i8042_suppress_kbd_ack = 2;
+	i8042_write_data(0xed); /* set leds */
+	DELAY;
+	while (i8042_read_status() & I8042_STR_IBF)
+		DELAY;
+	DELAY;
+	dbg("%02x -> i8042 (panic blink)\n", led);
+	i8042_write_data(led);
+	DELAY;
+	return delay;
+}
+
+#undef DELAY
+
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+	unsigned char param = 0x90;
+	int error;
+
+	error = i8042_command(&param, 0x1059);
+	if (error)
+		pr_warn("Failed to enable DRITEK extension: %d\n", error);
+}
+#endif
+
+#ifdef CONFIG_PM
+
+/*
+ * Here we try to reset everything back to a state we had
+ * before suspending.
+ */
+
+static int i8042_controller_resume(bool s2r_wants_reset)
+{
+	int error;
+
+	error = i8042_controller_check();
+	if (error)
+		return error;
+
+	if (i8042_reset == I8042_RESET_ALWAYS ||
+	    (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
+		error = i8042_controller_selftest();
+		if (error)
+			return error;
+	}
+
+/*
+ * Restore original CTR value and disable all ports
+ */
+
+	i8042_ctr = i8042_initial_ctr;
+	if (i8042_direct)
+		i8042_ctr &= ~I8042_CTR_XLATE;
+	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
+	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		pr_warn("Can't write CTR to resume, retrying...\n");
+		msleep(50);
+		if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+			pr_err("CTR write retry failed\n");
+			return -EIO;
+		}
+	}
+
+
+#ifdef CONFIG_X86
+	if (i8042_dritek)
+		i8042_dritek_enable();
+#endif
+
+	if (i8042_mux_present) {
+		if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
+			pr_warn("failed to resume active multiplexor, mouse won't work\n");
+	} else if (i8042_ports[I8042_AUX_PORT_NO].serio) {
+		i8042_enable_aux_port();
+	}
+
+	if (i8042_ports[I8042_KBD_PORT_NO].serio)
+		i8042_enable_kbd_port();
+
+	i8042_handle_data(0);
+
+	return 0;
+}
+
+/*
+ * Here we try to restore the original BIOS settings to avoid
+ * upsetting it.
+ */
+
+static int i8042_pm_suspend(struct device *dev)
+{
+	int i;
+
+	if (!i8042_forcenorestore && pm_suspend_via_firmware())
+		i8042_controller_reset(true);
+
+	/* Set up serio interrupts for system wakeup. */
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (serio && device_may_wakeup(&serio->dev))
+			enable_irq_wake(i8042_ports[i].irq);
+	}
+
+	return 0;
+}
+
+static int i8042_pm_resume_noirq(struct device *dev)
+{
+	if (i8042_forcenorestore || !pm_resume_via_firmware())
+		i8042_handle_data(0);
+
+	return 0;
+}
+
+static int i8042_pm_resume(struct device *dev)
+{
+	bool want_reset;
+	int i;
+
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (serio && device_may_wakeup(&serio->dev))
+			disable_irq_wake(i8042_ports[i].irq);
+	}
+
+	/*
+	 * If platform firmware was not going to be involved in suspend, we did
+	 * not restore the controller state to whatever it had been at boot
+	 * time, so we do not need to do anything.
+	 */
+	if (i8042_forcenorestore || !pm_suspend_via_firmware())
+		return 0;
+
+	/*
+	 * We only need to reset the controller if we are resuming after handing
+	 * off control to the platform firmware, otherwise we can simply restore
+	 * the mode.
+	 */
+	want_reset = pm_resume_via_firmware();
+
+	return i8042_controller_resume(want_reset);
+}
+
+static int i8042_pm_thaw(struct device *dev)
+{
+	i8042_handle_data(0);
+
+	return 0;
+}
+
+static int i8042_pm_reset(struct device *dev)
+{
+	i8042_controller_reset(false);
+
+	return 0;
+}
+
+static int i8042_pm_restore(struct device *dev)
+{
+	return i8042_controller_resume(false);
+}
+
+static const struct dev_pm_ops i8042_pm_ops = {
+	.suspend	= i8042_pm_suspend,
+	.resume_noirq	= i8042_pm_resume_noirq,
+	.resume		= i8042_pm_resume,
+	.thaw		= i8042_pm_thaw,
+	.poweroff	= i8042_pm_reset,
+	.restore	= i8042_pm_restore,
+};
+
+#endif /* CONFIG_PM */
+
+/*
+ * We need to reset the 8042 back to original mode on system shutdown,
+ * because otherwise BIOSes will be confused.
+ */
+
+static void i8042_shutdown(struct platform_device *dev)
+{
+	i8042_controller_reset(false);
+}
+
+static int i8042_create_kbd_port(void)
+{
+	struct serio *serio;
+	struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO];
+
+	serio = kzalloc_obj(*serio);
+	if (!serio)
+		return -ENOMEM;
+
+	serio->id.type		= i8042_direct ? SERIO_8042 : SERIO_8042_XL;
+	serio->write		= i8042_dumbkbd ? NULL : i8042_kbd_write;
+	serio->start		= i8042_start;
+	serio->stop		= i8042_stop;
+	serio->close		= i8042_port_close;
+	serio->ps2_cmd_mutex	= &i8042_mutex;
+	serio->port_data	= port;
+	serio->dev.parent	= &i8042_platform_device->dev;
+	strscpy(serio->name, "i8042 KBD port", sizeof(serio->name));
+	strscpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
+	strscpy(serio->firmware_id, i8042_kbd_firmware_id,
+		sizeof(serio->firmware_id));
+	set_primary_fwnode(&serio->dev, i8042_kbd_fwnode);
+
+	port->serio = serio;
+	port->irq = I8042_KBD_IRQ;
+
+	return 0;
+}
+
+static int i8042_create_aux_port(int idx)
+{
+	struct serio *serio;
+	int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx;
+	struct i8042_port *port = &i8042_ports[port_no];
+
+	serio = kzalloc_obj(*serio);
+	if (!serio)
+		return -ENOMEM;
+
+	serio->id.type		= SERIO_8042;
+	serio->write		= i8042_aux_write;
+	serio->start		= i8042_start;
+	serio->stop		= i8042_stop;
+	serio->ps2_cmd_mutex	= &i8042_mutex;
+	serio->port_data	= port;
+	serio->dev.parent	= &i8042_platform_device->dev;
+	if (idx < 0) {
+		strscpy(serio->name, "i8042 AUX port", sizeof(serio->name));
+		strscpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+		strscpy(serio->firmware_id, i8042_aux_firmware_id,
+			sizeof(serio->firmware_id));
+		serio->close = i8042_port_close;
+	} else {
+		snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx);
+		snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1);
+		strscpy(serio->firmware_id, i8042_aux_firmware_id,
+			sizeof(serio->firmware_id));
+	}
+
+	port->serio = serio;
+	port->mux = idx;
+	port->irq = I8042_AUX_IRQ;
+
+	return 0;
+}
+
+static void i8042_free_kbd_port(void)
+{
+	kfree(i8042_ports[I8042_KBD_PORT_NO].serio);
+	i8042_ports[I8042_KBD_PORT_NO].serio = NULL;
+}
+
+static void i8042_free_aux_ports(void)
+{
+	int i;
+
+	for (i = I8042_AUX_PORT_NO; i < I8042_NUM_PORTS; i++) {
+		kfree(i8042_ports[i].serio);
+		i8042_ports[i].serio = NULL;
+	}
+}
+
+static void i8042_register_ports(void)
+{
+	int i;
+
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (!serio)
+			continue;
+
+		printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
+			serio->name,
+			(unsigned long) I8042_DATA_REG,
+			(unsigned long) I8042_COMMAND_REG,
+			i8042_ports[i].irq);
+		serio_register_port(serio);
+	}
+}
+
+static void i8042_unregister_ports(void)
+{
+	int i;
+
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		if (i8042_ports[i].serio) {
+			serio_unregister_port(i8042_ports[i].serio);
+			i8042_ports[i].serio = NULL;
+		}
+	}
+}
+
+static void i8042_free_irqs(void)
+{
+	if (i8042_aux_irq_registered)
+		free_irq(I8042_AUX_IRQ, i8042_platform_device);
+	if (i8042_kbd_irq_registered)
+		free_irq(I8042_KBD_IRQ, i8042_platform_device);
+
+	i8042_aux_irq_registered = i8042_kbd_irq_registered = false;
+}
+
+static int i8042_setup_aux(void)
+{
+	int (*aux_enable)(void);
+	int error;
+	int i;
+
+	if (i8042_check_aux())
+		return -ENODEV;
+
+	if (i8042_nomux || i8042_check_mux()) {
+		error = i8042_create_aux_port(-1);
+		if (error)
+			goto err_free_ports;
+		aux_enable = i8042_enable_aux_port;
+	} else {
+		for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
+			error = i8042_create_aux_port(i);
+			if (error)
+				goto err_free_ports;
+		}
+		aux_enable = i8042_enable_mux_ports;
+	}
+
+	error = request_irq(I8042_AUX_IRQ, i8042_interrupt, IRQF_SHARED,
+			    "i8042", i8042_platform_device);
+	if (error)
+		goto err_free_ports;
+
+	error = aux_enable();
+	if (error)
+		goto err_free_irq;
+
+	i8042_aux_irq_registered = true;
+	return 0;
+
+ err_free_irq:
+	free_irq(I8042_AUX_IRQ, i8042_platform_device);
+ err_free_ports:
+	i8042_free_aux_ports();
+	return error;
+}
+
+static int i8042_setup_kbd(void)
+{
+	int error;
+
+	error = i8042_create_kbd_port();
+	if (error)
+		return error;
+
+	error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED,
+			    "i8042", i8042_platform_device);
+	if (error)
+		goto err_free_port;
+
+	error = i8042_enable_kbd_port();
+	if (error)
+		goto err_free_irq;
+
+	i8042_kbd_irq_registered = true;
+	return 0;
+
+ err_free_irq:
+	free_irq(I8042_KBD_IRQ, i8042_platform_device);
+ err_free_port:
+	i8042_free_kbd_port();
+	return error;
+}
+
+static int i8042_kbd_bind_notifier(struct notifier_block *nb,
+				   unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct serio *serio = to_serio_port(dev);
+	struct i8042_port *port = serio->port_data;
+
+	if (serio != i8042_ports[I8042_KBD_PORT_NO].serio)
+		return 0;
+
+	switch (action) {
+	case BUS_NOTIFY_BOUND_DRIVER:
+		port->driver_bound = true;
+		break;
+
+	case BUS_NOTIFY_UNBIND_DRIVER:
+		port->driver_bound = false;
+		break;
+	}
+
+	return 0;
+}
+
+static int i8042_probe(struct platform_device *dev)
+{
+	int error;
+
+	if (i8042_reset == I8042_RESET_ALWAYS) {
+		error = i8042_controller_selftest();
+		if (error)
+			return error;
+	}
+
+	error = i8042_controller_init();
+	if (error)
+		return error;
+
+#ifdef CONFIG_X86
+	if (i8042_dritek)
+		i8042_dritek_enable();
+#endif
+
+	if (!i8042_noaux) {
+		error = i8042_setup_aux();
+		if (error && error != -ENODEV && error != -EBUSY)
+			goto out_fail;
+	}
+
+	if (!i8042_nokbd) {
+		error = i8042_setup_kbd();
+		if (error)
+			goto out_fail;
+	}
+/*
+ * Ok, everything is ready, let's register all serio ports
+ */
+	i8042_register_ports();
+
+	return 0;
+
+ out_fail:
+	i8042_free_aux_ports();	/* in case KBD failed but AUX not */
+	i8042_free_irqs();
+	i8042_controller_reset(false);
+
+	return error;
+}
+
+static void i8042_remove(struct platform_device *dev)
+{
+	i8042_unregister_ports();
+	i8042_free_irqs();
+	i8042_controller_reset(false);
+}
+
+static struct platform_driver i8042_driver = {
+	.driver		= {
+		.name	= "i8042",
+#ifdef CONFIG_PM
+		.pm	= &i8042_pm_ops,
+#endif
+	},
+	.probe		= i8042_probe,
+	.remove		= i8042_remove,
+	.shutdown	= i8042_shutdown,
+};
+
+static struct notifier_block i8042_kbd_bind_notifier_block = {
+	.notifier_call = i8042_kbd_bind_notifier,
+};
+
+static int __init i8042_init(void)
+{
+	int err;
+
+	dbg_init();
+
+	err = i8042_platform_init();
+	if (err)
+		return (err == -ENODEV) ? 0 : err;
+
+	err = i8042_controller_check();
+	if (err)
+		goto err_platform_exit;
+
+	/* Set this before creating the dev to allow i8042_command to work right away */
+	i8042_present = true;
+
+	err = platform_driver_register(&i8042_driver);
+	if (err)
+		goto err_platform_exit;
+
+	i8042_platform_device = platform_device_alloc("i8042", -1);
+	if (!i8042_platform_device) {
+		err = -ENOMEM;
+		goto err_unregister_driver;
+	}
+
+	err = platform_device_add(i8042_platform_device);
+	if (err)
+		goto err_free_device;
+
+	bus_register_notifier(&serio_bus, &i8042_kbd_bind_notifier_block);
+	panic_blink = i8042_panic_blink;
+
+	return 0;
+
+err_free_device:
+	platform_device_put(i8042_platform_device);
+err_unregister_driver:
+	platform_driver_unregister(&i8042_driver);
+ err_platform_exit:
+	i8042_platform_exit();
+	return err;
+}
+
+static void __exit i8042_exit(void)
+{
+	if (!i8042_present)
+		return;
+
+	platform_device_unregister(i8042_platform_device);
+	platform_driver_unregister(&i8042_driver);
+	i8042_platform_exit();
+
+	bus_unregister_notifier(&serio_bus, &i8042_kbd_bind_notifier_block);
+	panic_blink = NULL;
+}
+
+module_init(i8042_init);
+module_exit(i8042_exit);
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
new file mode 100644
index 000000000..5f61672d5
--- /dev/null
+++ b/drivers/input/serio/i8042.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _I8042_H
+#define _I8042_H
+
+
+/*
+ *  Copyright (c) 1999-2002 Vojtech Pavlik
+ */
+
+/*
+ * Arch-dependent inline functions and defines.
+ */
+
+#if defined(CONFIG_MACH_JAZZ)
+#include "i8042-jazzio.h"
+#elif defined(CONFIG_SGI_HAS_I8042)
+#include "i8042-ip22io.h"
+#elif defined(CONFIG_SNI_RM)
+#include "i8042-snirm.h"
+#elif defined(CONFIG_SPARC)
+#include "i8042-sparcio.h"
+#elif defined(CONFIG_X86) || defined(CONFIG_LOONGARCH)
+#include "i8042-acpipnpio.h"
+#else
+#include "i8042-io.h"
+#endif
+
+/*
+ * This is in 50us units, the time we wait for the i8042 to react. This
+ * has to be long enough for the i8042 itself to timeout on sending a byte
+ * to a non-existent mouse.
+ */
+
+#define I8042_CTL_TIMEOUT	10000
+
+/*
+ * Return codes.
+ */
+
+#define I8042_RET_CTL_TEST	0x55
+
+/*
+ * Expected maximum internal i8042 buffer size. This is used for flushing
+ * the i8042 buffers.
+ */
+
+#define I8042_BUFFER_SIZE	16
+
+/*
+ * Number of AUX ports on controllers supporting active multiplexing
+ * specification
+ */
+
+#define I8042_NUM_MUX_PORTS	4
+
+/*
+ * Debug.
+ */
+
+#ifdef DEBUG
+static unsigned long i8042_start_time;
+#define dbg_init() do { i8042_start_time = jiffies; } while (0)
+#define dbg(format, arg...)							\
+	do {									\
+		if (i8042_debug)						\
+			printk(KERN_DEBUG KBUILD_MODNAME ": [%d] " format,	\
+			       (int) (jiffies - i8042_start_time), ##arg);	\
+	} while (0)
+
+#define filter_dbg(filter, data, format, args...)		\
+	do {							\
+		if (!i8042_debug)				\
+			break;					\
+								\
+		if (!filter || i8042_unmask_kbd_data)		\
+			dbg("%02x " format, data, ##args);	\
+		else						\
+			dbg("** " format, ##args);		\
+	} while (0)
+#else
+#define dbg_init() do { } while (0)
+#define dbg(format, arg...)							\
+	do {									\
+		if (0)								\
+			printk(KERN_DEBUG pr_fmt(format), ##arg);		\
+	} while (0)
+
+#define filter_dbg(filter, data, format, args...) do { } while (0)
+#endif
+
+#endif /* _I8042_H */
diff --git a/drivers/input/serio/ioc3kbd.c b/drivers/input/serio/ioc3kbd.c
new file mode 100644
index 000000000..4ef60c24e
--- /dev/null
+++ b/drivers/input/serio/ioc3kbd.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 PS/2 controller driver for linux
+ *
+ * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
+ *
+ * Based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
+ *               Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/sn/ioc3.h>
+
+struct ioc3kbd_data {
+	struct ioc3_serioregs __iomem *regs;
+	struct serio *kbd, *aux;
+	bool kbd_exists, aux_exists;
+	int irq;
+};
+
+static int ioc3kbd_wait(struct ioc3_serioregs __iomem *regs, u32 mask)
+{
+	unsigned long timeout = 0;
+
+	while ((readl(&regs->km_csr) & mask) && (timeout < 250)) {
+		udelay(50);
+		timeout++;
+	}
+	return (timeout >= 250) ? -ETIMEDOUT : 0;
+}
+
+static int ioc3kbd_write(struct serio *dev, u8 val)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+	int ret;
+
+	ret = ioc3kbd_wait(d->regs, KM_CSR_K_WRT_PEND);
+	if (ret)
+		return ret;
+
+	writel(val, &d->regs->k_wd);
+
+	return 0;
+}
+
+static int ioc3kbd_start(struct serio *dev)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+
+	d->kbd_exists = true;
+	return 0;
+}
+
+static void ioc3kbd_stop(struct serio *dev)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+
+	d->kbd_exists = false;
+}
+
+static int ioc3aux_write(struct serio *dev, u8 val)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+	int ret;
+
+	ret = ioc3kbd_wait(d->regs, KM_CSR_M_WRT_PEND);
+	if (ret)
+		return ret;
+
+	writel(val, &d->regs->m_wd);
+
+	return 0;
+}
+
+static int ioc3aux_start(struct serio *dev)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+
+	d->aux_exists = true;
+	return 0;
+}
+
+static void ioc3aux_stop(struct serio *dev)
+{
+	struct ioc3kbd_data *d = dev->port_data;
+
+	d->aux_exists = false;
+}
+
+static void ioc3kbd_process_data(struct serio *dev, u32 data)
+{
+	if (data & KM_RD_VALID_0)
+		serio_interrupt(dev, (data >> KM_RD_DATA_0_SHIFT) & 0xff, 0);
+	if (data & KM_RD_VALID_1)
+		serio_interrupt(dev, (data >> KM_RD_DATA_1_SHIFT) & 0xff, 0);
+	if (data & KM_RD_VALID_2)
+		serio_interrupt(dev, (data >> KM_RD_DATA_2_SHIFT) & 0xff, 0);
+}
+
+static irqreturn_t ioc3kbd_intr(int itq, void *dev_id)
+{
+	struct ioc3kbd_data *d = dev_id;
+	u32 data_k, data_m;
+
+	data_k = readl(&d->regs->k_rd);
+	if (d->kbd_exists)
+		ioc3kbd_process_data(d->kbd, data_k);
+
+	data_m = readl(&d->regs->m_rd);
+	if (d->aux_exists)
+		ioc3kbd_process_data(d->aux, data_m);
+
+	return IRQ_HANDLED;
+}
+
+static int ioc3kbd_probe(struct platform_device *pdev)
+{
+	struct ioc3_serioregs __iomem *regs;
+	struct device *dev = &pdev->dev;
+	struct ioc3kbd_data *d;
+	struct serio *sk, *sa;
+	int irq, ret;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	sk = kzalloc_obj(*sk);
+	if (!sk)
+		return -ENOMEM;
+
+	sa = kzalloc_obj(*sa);
+	if (!sa) {
+		kfree(sk);
+		return -ENOMEM;
+	}
+
+	sk->id.type = SERIO_8042;
+	sk->write = ioc3kbd_write;
+	sk->start = ioc3kbd_start;
+	sk->stop = ioc3kbd_stop;
+	snprintf(sk->name, sizeof(sk->name), "IOC3 keyboard %d", pdev->id);
+	snprintf(sk->phys, sizeof(sk->phys), "ioc3/serio%dkbd", pdev->id);
+	sk->port_data = d;
+	sk->dev.parent = dev;
+
+	sa->id.type = SERIO_8042;
+	sa->write = ioc3aux_write;
+	sa->start = ioc3aux_start;
+	sa->stop = ioc3aux_stop;
+	snprintf(sa->name, sizeof(sa->name), "IOC3 auxiliary %d", pdev->id);
+	snprintf(sa->phys, sizeof(sa->phys), "ioc3/serio%daux", pdev->id);
+	sa->port_data = d;
+	sa->dev.parent = dev;
+
+	d->regs = regs;
+	d->kbd = sk;
+	d->aux = sa;
+	d->irq = irq;
+
+	platform_set_drvdata(pdev, d);
+	serio_register_port(d->kbd);
+	serio_register_port(d->aux);
+
+	ret = request_irq(irq, ioc3kbd_intr, IRQF_SHARED, "ioc3-kbd", d);
+	if (ret) {
+		dev_err(dev, "could not request IRQ %d\n", irq);
+		serio_unregister_port(d->kbd);
+		serio_unregister_port(d->aux);
+		return ret;
+	}
+
+	/* enable ports */
+	writel(KM_CSR_K_CLAMP_3 | KM_CSR_M_CLAMP_3, &regs->km_csr);
+
+	return 0;
+}
+
+static void ioc3kbd_remove(struct platform_device *pdev)
+{
+	struct ioc3kbd_data *d = platform_get_drvdata(pdev);
+
+	free_irq(d->irq, d);
+
+	serio_unregister_port(d->kbd);
+	serio_unregister_port(d->aux);
+}
+
+static const struct platform_device_id ioc3kbd_id_table[] = {
+	{ "ioc3-kbd", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, ioc3kbd_id_table);
+
+static struct platform_driver ioc3kbd_driver = {
+	.probe          = ioc3kbd_probe,
+	.remove         = ioc3kbd_remove,
+	.id_table	= ioc3kbd_id_table,
+	.driver = {
+		.name = "ioc3-kbd",
+	},
+};
+module_platform_driver(ioc3kbd_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
+MODULE_DESCRIPTION("SGI IOC3 serio driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
new file mode 100644
index 000000000..05b64277a
--- /dev/null
+++ b/drivers/input/serio/libps2.c
@@ -0,0 +1,620 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PS/2 driver library
+ *
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ * Copyright (c) 2004 Dmitry Torokhov
+ */
+
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/kmsan-checks.h>
+#include <linux/serio.h>
+#include <linux/i8042.h>
+#include <linux/libps2.h>
+
+#define DRIVER_DESC	"PS/2 driver library"
+
+#define PS2_CMD_SETSCALE11	0x00e6
+#define PS2_CMD_SETRES		0x10e8
+#define PS2_CMD_EX_SETLEDS	0x20eb
+#define PS2_CMD_SETLEDS		0x10ed
+#define PS2_CMD_GETID		0x02f2
+#define PS2_CMD_SETREP		0x10f3 /* Set repeat rate/set report rate */
+#define PS2_CMD_RESET_BAT	0x02ff
+
+#define PS2_RET_BAT		0xaa
+#define PS2_RET_ID		0x00
+#define PS2_RET_ACK		0xfa
+#define PS2_RET_NAK		0xfe
+#define PS2_RET_ERR		0xfc
+
+#define PS2_FLAG_ACK		BIT(0)	/* Waiting for ACK/NAK */
+#define PS2_FLAG_CMD		BIT(1)	/* Waiting for a command to finish */
+#define PS2_FLAG_CMD1		BIT(2)	/* Waiting for the first byte of command response */
+#define PS2_FLAG_WAITID		BIT(3)	/* Command executing is GET ID */
+#define PS2_FLAG_NAK		BIT(4)	/* Last transmission was NAKed */
+#define PS2_FLAG_PASS_NOACK	BIT(5)	/* Pass non-ACK byte to receive handler */
+
+static int ps2_do_sendbyte(struct ps2dev *ps2dev, u8 byte,
+			   unsigned int timeout, unsigned int max_attempts)
+	__releases(&ps2dev->serio->lock) __acquires(&ps2dev->serio->lock)
+{
+	int attempt = 0;
+	int error;
+
+	lockdep_assert_held(&ps2dev->serio->lock);
+
+	do {
+		ps2dev->nak = 1;
+		ps2dev->flags |= PS2_FLAG_ACK;
+
+		serio_continue_rx(ps2dev->serio);
+
+		error = serio_write(ps2dev->serio, byte);
+		if (error)
+			dev_dbg(&ps2dev->serio->dev,
+				"failed to write %#02x: %d\n", byte, error);
+		else
+			wait_event_timeout(ps2dev->wait,
+					   !(ps2dev->flags & PS2_FLAG_ACK),
+					   msecs_to_jiffies(timeout));
+
+		serio_pause_rx(ps2dev->serio);
+	} while (ps2dev->nak == PS2_RET_NAK && ++attempt < max_attempts);
+
+	ps2dev->flags &= ~PS2_FLAG_ACK;
+
+	if (!error) {
+		switch (ps2dev->nak) {
+		case 0:
+			break;
+		case PS2_RET_NAK:
+			error = -EAGAIN;
+			break;
+		case PS2_RET_ERR:
+			error = -EPROTO;
+			break;
+		default:
+			error = -EIO;
+			break;
+		}
+	}
+
+	if (error || attempt > 1)
+		dev_dbg(&ps2dev->serio->dev,
+			"%02x - %d (%x), attempt %d\n",
+			byte, error, ps2dev->nak, attempt);
+
+	return error;
+}
+
+/**
+ * ps2_sendbyte - sends a byte to the device and wait for acknowledgement
+ * @ps2dev: a PS/2 device to send the data to
+ * @byte: data to be sent to the device
+ * @timeout: timeout for sending the data and receiving an acknowledge
+ *
+ * The function doesn't handle retransmission, the caller is expected to handle
+ * it when needed.
+ *
+ * ps2_sendbyte() can only be called from a process context.
+ */
+int ps2_sendbyte(struct ps2dev *ps2dev, u8 byte, unsigned int timeout)
+{
+	int retval;
+
+	guard(serio_pause_rx)(ps2dev->serio);
+
+	retval = ps2_do_sendbyte(ps2dev, byte, timeout, 1);
+	dev_dbg(&ps2dev->serio->dev, "%02x - %x\n", byte, ps2dev->nak);
+
+	return retval;
+}
+EXPORT_SYMBOL(ps2_sendbyte);
+
+/**
+ * ps2_begin_command - mark beginning of execution of a complex command
+ * @ps2dev: a PS/2 device executing the command
+ *
+ * Serializes a complex/compound command. Once command is finished
+ * ps2_end_command() should be called.
+ */
+void ps2_begin_command(struct ps2dev *ps2dev)
+{
+	struct mutex *m = ps2dev->serio->ps2_cmd_mutex ?: &ps2dev->cmd_mutex;
+
+	mutex_lock(m);
+}
+EXPORT_SYMBOL(ps2_begin_command);
+
+/**
+ * ps2_end_command - mark end of execution of a complex command
+ * @ps2dev: a PS/2 device executing the command
+ */
+void ps2_end_command(struct ps2dev *ps2dev)
+{
+	struct mutex *m = ps2dev->serio->ps2_cmd_mutex ?: &ps2dev->cmd_mutex;
+
+	mutex_unlock(m);
+}
+EXPORT_SYMBOL(ps2_end_command);
+
+/**
+ * ps2_drain - waits for device to transmit requested number of bytes
+ * and discards them
+ * @ps2dev: the PS/2 device that should be drained
+ * @maxbytes: maximum number of bytes to be drained
+ * @timeout: time to drain the device
+ */
+void ps2_drain(struct ps2dev *ps2dev, size_t maxbytes, unsigned int timeout)
+{
+	if (WARN_ON(maxbytes > sizeof(ps2dev->cmdbuf)))
+		maxbytes = sizeof(ps2dev->cmdbuf);
+
+	ps2_begin_command(ps2dev);
+
+	scoped_guard(serio_pause_rx, ps2dev->serio) {
+		ps2dev->flags = PS2_FLAG_CMD;
+		ps2dev->cmdcnt = maxbytes;
+	}
+
+	wait_event_timeout(ps2dev->wait,
+			   !(ps2dev->flags & PS2_FLAG_CMD),
+			   msecs_to_jiffies(timeout));
+
+	ps2_end_command(ps2dev);
+}
+EXPORT_SYMBOL(ps2_drain);
+
+/**
+ * ps2_is_keyboard_id - checks received ID byte against the list of
+ *   known keyboard IDs
+ * @id_byte: data byte that should be checked
+ */
+bool ps2_is_keyboard_id(u8 id_byte)
+{
+	static const u8 keyboard_ids[] = {
+		0xab,	/* Regular keyboards		*/
+		0xac,	/* NCD Sun keyboard		*/
+		0x2b,	/* Trust keyboard, translated	*/
+		0x5d,	/* Trust keyboard		*/
+		0x60,	/* NMB SGI keyboard, translated */
+		0x47,	/* NMB SGI keyboard		*/
+	};
+
+	return memchr(keyboard_ids, id_byte, sizeof(keyboard_ids)) != NULL;
+}
+EXPORT_SYMBOL(ps2_is_keyboard_id);
+
+/*
+ * ps2_adjust_timeout() is called after receiving 1st byte of command
+ * response and tries to reduce remaining timeout to speed up command
+ * completion.
+ */
+static int ps2_adjust_timeout(struct ps2dev *ps2dev,
+			      unsigned int command, unsigned int timeout)
+{
+	switch (command) {
+	case PS2_CMD_RESET_BAT:
+		/*
+		 * Device has sent the first response byte after
+		 * reset command, reset is thus done, so we can
+		 * shorten the timeout.
+		 * The next byte will come soon (keyboard) or not
+		 * at all (mouse).
+		 */
+		if (timeout > msecs_to_jiffies(100))
+			timeout = msecs_to_jiffies(100);
+		break;
+
+	case PS2_CMD_GETID:
+		/*
+		 * Microsoft Natural Elite keyboard responds to
+		 * the GET ID command as it were a mouse, with
+		 * a single byte. Fail the command so atkbd will
+		 * use alternative probe to detect it.
+		 */
+		if (ps2dev->cmdbuf[1] == 0xaa) {
+			scoped_guard(serio_pause_rx, ps2dev->serio)
+				ps2dev->flags = 0;
+
+			timeout = 0;
+		}
+
+		/*
+		 * If device behind the port is not a keyboard there
+		 * won't be 2nd byte of ID response.
+		 */
+		if (!ps2_is_keyboard_id(ps2dev->cmdbuf[1])) {
+			scoped_guard(serio_pause_rx, ps2dev->serio)
+				ps2dev->flags = ps2dev->cmdcnt = 0;
+
+			timeout = 0;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	return timeout;
+}
+
+/**
+ * __ps2_command - send a command to PS/2 device
+ * @ps2dev: the PS/2 device that should execute the command
+ * @param: a buffer containing parameters to be sent along with the command,
+ *   or place where the results of the command execution will be deposited,
+ *   or both
+ * @command: command word that encodes the command itself, as well as number of
+ *   additional parameter bytes that should be sent to the device and expected
+ *   length of the command response
+ *
+ * Not serialized. Callers should use ps2_begin_command() and ps2_end_command()
+ * to ensure proper serialization for complex commands.
+ */
+int __ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command)
+{
+	unsigned int timeout;
+	unsigned int send = (command >> 12) & 0xf;
+	unsigned int receive = (command >> 8) & 0xf;
+	int rc;
+	int i;
+	u8 send_param[16];
+
+	if (WARN_ON(receive > sizeof(ps2dev->cmdbuf)))
+		return -EINVAL;
+
+	if (WARN_ON(send && !param))
+		return -EINVAL;
+
+	memcpy(send_param, param, send);
+
+	/*
+	 * Not using guard notation because we need to break critical
+	 * section below while waiting for the response.
+	 */
+	serio_pause_rx(ps2dev->serio);
+
+	ps2dev->cmdcnt = receive;
+
+	switch (command) {
+	case PS2_CMD_GETID:
+		/*
+		 * Some mice do not ACK the "get ID" command, prepare to
+		 * handle this.
+		 */
+		ps2dev->flags = PS2_FLAG_WAITID;
+		break;
+
+	case PS2_CMD_SETLEDS:
+	case PS2_CMD_EX_SETLEDS:
+	case PS2_CMD_SETREP:
+		ps2dev->flags = PS2_FLAG_PASS_NOACK;
+		break;
+
+	default:
+		ps2dev->flags = 0;
+		break;
+	}
+
+	if (receive) {
+		/* Indicate that we expect response to the command. */
+		ps2dev->flags |= PS2_FLAG_CMD | PS2_FLAG_CMD1;
+		if (param)
+			for (i = 0; i < receive; i++)
+				ps2dev->cmdbuf[(receive - 1) - i] = param[i];
+	}
+
+	/*
+	 * Some devices (Synaptics) perform the reset before
+	 * ACKing the reset command, and so it can take a long
+	 * time before the ACK arrives.
+	 */
+	timeout = command == PS2_CMD_RESET_BAT ? 1000 : 200;
+
+	rc = ps2_do_sendbyte(ps2dev, command & 0xff, timeout, 2);
+	if (rc)
+		goto out_reset_flags;
+
+	/* Send command parameters, if any. */
+	for (i = 0; i < send; i++) {
+		rc = ps2_do_sendbyte(ps2dev, param[i], 200, 2);
+		if (rc)
+			goto out_reset_flags;
+	}
+
+	serio_continue_rx(ps2dev->serio);
+
+	/*
+	 * The reset command takes a long time to execute.
+	 */
+	timeout = msecs_to_jiffies(command == PS2_CMD_RESET_BAT ? 4000 : 500);
+
+	timeout = wait_event_timeout(ps2dev->wait,
+				     !(ps2dev->flags & PS2_FLAG_CMD1), timeout);
+
+	if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) {
+
+		timeout = ps2_adjust_timeout(ps2dev, command, timeout);
+		wait_event_timeout(ps2dev->wait,
+				   !(ps2dev->flags & PS2_FLAG_CMD), timeout);
+	}
+
+	serio_pause_rx(ps2dev->serio);
+
+	if (param) {
+		for (i = 0; i < receive; i++)
+			param[i] = ps2dev->cmdbuf[(receive - 1) - i];
+		kmsan_unpoison_memory(param, receive);
+	}
+
+	if (ps2dev->cmdcnt &&
+	    (command != PS2_CMD_RESET_BAT || ps2dev->cmdcnt != 1)) {
+		rc = -EPROTO;
+		goto out_reset_flags;
+	}
+
+	rc = 0;
+
+ out_reset_flags:
+	ps2dev->flags = 0;
+	serio_continue_rx(ps2dev->serio);
+
+	dev_dbg(&ps2dev->serio->dev,
+		"%02x [%*ph] - %x/%08lx [%*ph]\n",
+		command & 0xff, send, send_param,
+		ps2dev->nak, ps2dev->flags,
+		receive, param ?: send_param);
+
+	/*
+	 * ps_command() handles resends itself, so do not leak -EAGAIN
+	 * to the callers.
+	 */
+	return rc != -EAGAIN ? rc : -EPROTO;
+}
+EXPORT_SYMBOL(__ps2_command);
+
+/**
+ * ps2_command - send a command to PS/2 device
+ * @ps2dev: the PS/2 device that should execute the command
+ * @param: a buffer containing parameters to be sent along with the command,
+ *   or place where the results of the command execution will be deposited,
+ *   or both
+ * @command: command word that encodes the command itself, as well as number of
+ *   additional parameter bytes that should be sent to the device and expected
+ *   length of the command response
+ *
+ * Note: ps2_command() serializes the command execution so that only one
+ * command can be executed at a time for either individual port or the entire
+ * 8042 controller.
+ */
+int ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command)
+{
+	int rc;
+
+	ps2_begin_command(ps2dev);
+	rc = __ps2_command(ps2dev, param, command);
+	ps2_end_command(ps2dev);
+
+	return rc;
+}
+EXPORT_SYMBOL(ps2_command);
+
+/**
+ * ps2_sliced_command - sends an extended PS/2 command to a mouse
+ * @ps2dev: the PS/2 device that should execute the command
+ * @command: command byte
+ *
+ * The command is sent using "sliced" syntax understood by advanced devices,
+ * such as Logitech or Synaptics touchpads. The command is encoded as:
+ * 0xE6 0xE8 rr 0xE8 ss 0xE8 tt 0xE8 uu where (rr*64)+(ss*16)+(tt*4)+uu
+ * is the command.
+ */
+int ps2_sliced_command(struct ps2dev *ps2dev, u8 command)
+{
+	int i;
+	int retval;
+
+	ps2_begin_command(ps2dev);
+
+	retval = __ps2_command(ps2dev, NULL, PS2_CMD_SETSCALE11);
+	if (retval)
+		goto out;
+
+	for (i = 6; i >= 0; i -= 2) {
+		u8 d = (command >> i) & 3;
+		retval = __ps2_command(ps2dev, &d, PS2_CMD_SETRES);
+		if (retval)
+			break;
+	}
+
+out:
+	dev_dbg(&ps2dev->serio->dev, "%02x - %d\n", command, retval);
+	ps2_end_command(ps2dev);
+	return retval;
+}
+EXPORT_SYMBOL(ps2_sliced_command);
+
+/**
+ * ps2_init - initializes ps2dev structure
+ * @ps2dev: structure to be initialized
+ * @serio: serio port associated with the PS/2 device
+ * @pre_receive_handler: validation handler to check basic communication state
+ * @receive_handler: main protocol handler
+ *
+ * Prepares ps2dev structure for use in drivers for PS/2 devices.
+ */
+void ps2_init(struct ps2dev *ps2dev, struct serio *serio,
+	      ps2_pre_receive_handler_t pre_receive_handler,
+	      ps2_receive_handler_t receive_handler)
+{
+	ps2dev->pre_receive_handler = pre_receive_handler;
+	ps2dev->receive_handler = receive_handler;
+
+	mutex_init(&ps2dev->cmd_mutex);
+	lockdep_set_subclass(&ps2dev->cmd_mutex, serio->depth);
+	init_waitqueue_head(&ps2dev->wait);
+	ps2dev->serio = serio;
+	serio_set_drvdata(serio, ps2dev);
+}
+EXPORT_SYMBOL(ps2_init);
+
+/*
+ * ps2_handle_response() stores device's response to a command and notifies
+ * the process waiting for completion of the command. Note that there is a
+ * distinction between waiting for the first byte of the response, and
+ * waiting for subsequent bytes. It is done so that callers could shorten
+ * timeouts once first byte of response is received.
+ */
+static void ps2_handle_response(struct ps2dev *ps2dev, u8 data)
+{
+	if (ps2dev->cmdcnt)
+		ps2dev->cmdbuf[--ps2dev->cmdcnt] = data;
+
+	if (ps2dev->flags & PS2_FLAG_CMD1) {
+		ps2dev->flags &= ~PS2_FLAG_CMD1;
+		if (ps2dev->cmdcnt)
+			wake_up(&ps2dev->wait);
+	}
+
+	if (!ps2dev->cmdcnt) {
+		ps2dev->flags &= ~PS2_FLAG_CMD;
+		wake_up(&ps2dev->wait);
+	}
+}
+
+/*
+ * ps2_handle_ack() processes ACK/NAK of a command from a PS/2 device,
+ * possibly applying workarounds for mice not acknowledging the "get ID"
+ * command.
+ */
+static void ps2_handle_ack(struct ps2dev *ps2dev, u8 data)
+{
+	switch (data) {
+	case PS2_RET_ACK:
+		ps2dev->nak = 0;
+		break;
+
+	case PS2_RET_NAK:
+		ps2dev->flags |= PS2_FLAG_NAK;
+		ps2dev->nak = PS2_RET_NAK;
+		break;
+
+	case PS2_RET_ERR:
+		if (ps2dev->flags & PS2_FLAG_NAK) {
+			ps2dev->flags &= ~PS2_FLAG_NAK;
+			ps2dev->nak = PS2_RET_ERR;
+			break;
+		}
+		fallthrough;
+
+	/*
+	 * Workaround for mice which don't ACK the Get ID command.
+	 * These are valid mouse IDs that we recognize.
+	 */
+	case 0x00:
+	case 0x03:
+	case 0x04:
+		if (ps2dev->flags & PS2_FLAG_WAITID) {
+			ps2dev->nak = 0;
+			break;
+		}
+		fallthrough;
+	default:
+		/*
+		 * Do not signal errors if we get unexpected reply while
+		 * waiting for an ACK to the initial (first) command byte:
+		 * the device might not be quiesced yet and continue
+		 * delivering data. For certain commands (such as set leds and
+		 * set repeat rate) that can be used during normal device
+		 * operation, we even pass this data byte to the normal receive
+		 * handler.
+		 * Note that we reset PS2_FLAG_WAITID flag, so the workaround
+		 * for mice not acknowledging the Get ID command only triggers
+		 * on the 1st byte; if device spews data we really want to see
+		 * a real ACK from it.
+		 */
+		dev_dbg(&ps2dev->serio->dev, "unexpected %#02x\n", data);
+		if (ps2dev->flags & PS2_FLAG_PASS_NOACK)
+			ps2dev->receive_handler(ps2dev, data);
+		ps2dev->flags &= ~(PS2_FLAG_WAITID | PS2_FLAG_PASS_NOACK);
+		return;
+	}
+
+	if (!ps2dev->nak)
+		ps2dev->flags &= ~PS2_FLAG_NAK;
+
+	ps2dev->flags &= ~PS2_FLAG_ACK;
+
+	if (!ps2dev->nak && data != PS2_RET_ACK)
+		ps2_handle_response(ps2dev, data);
+	else
+		wake_up(&ps2dev->wait);
+}
+
+/*
+ * Clears state of PS/2 device after communication error by resetting majority
+ * of flags and waking up waiters, if any.
+ */
+static void ps2_cleanup(struct ps2dev *ps2dev)
+{
+	unsigned long old_flags = ps2dev->flags;
+
+	/* reset all flags except last nak */
+	ps2dev->flags &= PS2_FLAG_NAK;
+
+	if (old_flags & PS2_FLAG_ACK)
+		ps2dev->nak = 1;
+
+	if (old_flags & (PS2_FLAG_ACK | PS2_FLAG_CMD))
+		wake_up(&ps2dev->wait);
+}
+
+/**
+ * ps2_interrupt - common interrupt handler for PS/2 devices
+ * @serio: serio port for the device
+ * @data: a data byte received from the device
+ * @flags: flags such as %SERIO_PARITY or %SERIO_TIMEOUT indicating state of
+ *   the data transfer
+ *
+ * ps2_interrupt() invokes pre-receive handler, optionally handles command
+ * acknowledgement and response from the device, and finally passes the data
+ * to the main protocol handler for future processing.
+ */
+irqreturn_t ps2_interrupt(struct serio *serio, u8 data, unsigned int flags) {
+	struct ps2dev *ps2dev = serio_get_drvdata(serio);
+	enum ps2_disposition rc;
+
+	rc = ps2dev->pre_receive_handler(ps2dev, data, flags);
+	switch (rc) {
+	case PS2_ERROR:
+		ps2_cleanup(ps2dev);
+		break;
+
+	case PS2_IGNORE:
+		break;
+
+	case PS2_PROCESS:
+		if (ps2dev->flags & PS2_FLAG_ACK)
+			ps2_handle_ack(ps2dev, data);
+		else if (ps2dev->flags & PS2_FLAG_CMD)
+			ps2_handle_response(ps2dev, data);
+		else
+			ps2dev->receive_handler(ps2dev, data);
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+EXPORT_SYMBOL(ps2_interrupt);
+
+MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
+MODULE_DESCRIPTION("PS/2 driver library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/serio/maceps2.c b/drivers/input/serio/maceps2.c
new file mode 100644
index 000000000..fb41e7f5a
--- /dev/null
+++ b/drivers/input/serio/maceps2.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SGI O2 MACE PS2 controller driver for linux
+ *
+ * Copyright (C) 2002 Vivien Chappelier
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/ip32/mace.h>
+#include <asm/ip32/ip32_ints.h>
+
+MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org");
+MODULE_DESCRIPTION("SGI O2 MACE PS2 controller driver");
+MODULE_LICENSE("GPL");
+
+#define MACE_PS2_TIMEOUT 10000 /* in 50us unit */
+
+#define PS2_STATUS_CLOCK_SIGNAL  BIT(0) /* external clock signal */
+#define PS2_STATUS_CLOCK_INHIBIT BIT(1) /* clken output signal */
+#define PS2_STATUS_TX_INPROGRESS BIT(2) /* transmission in progress */
+#define PS2_STATUS_TX_EMPTY      BIT(3) /* empty transmit buffer */
+#define PS2_STATUS_RX_FULL       BIT(4) /* full receive buffer */
+#define PS2_STATUS_RX_INPROGRESS BIT(5) /* reception in progress */
+#define PS2_STATUS_ERROR_PARITY  BIT(6) /* parity error */
+#define PS2_STATUS_ERROR_FRAMING BIT(7) /* framing error */
+
+#define PS2_CONTROL_TX_CLOCK_DISABLE BIT(0) /* inhibit clock signal after TX */
+#define PS2_CONTROL_TX_ENABLE        BIT(1) /* transmit enable */
+#define PS2_CONTROL_TX_INT_ENABLE    BIT(2) /* enable transmit interrupt */
+#define PS2_CONTROL_RX_INT_ENABLE    BIT(3) /* enable receive interrupt */
+#define PS2_CONTROL_RX_CLOCK_ENABLE  BIT(4) /* pause reception if set to 0 */
+#define PS2_CONTROL_RESET            BIT(5) /* reset */
+
+struct maceps2_data {
+	struct mace_ps2port *port;
+	int irq;
+};
+
+static struct maceps2_data port_data[2];
+static struct serio *maceps2_port[2];
+static struct platform_device *maceps2_device;
+
+static int maceps2_write(struct serio *dev, unsigned char val)
+{
+	struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
+	unsigned int timeout = MACE_PS2_TIMEOUT;
+
+	do {
+		if (port->status & PS2_STATUS_TX_EMPTY) {
+			port->tx = val;
+			return 0;
+		}
+		udelay(50);
+	} while (timeout--);
+
+	return -1;
+}
+
+static irqreturn_t maceps2_interrupt(int irq, void *dev_id)
+{
+	struct serio *dev = dev_id;
+	struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
+	unsigned long byte;
+
+	if (port->status & PS2_STATUS_RX_FULL) {
+		byte = port->rx;
+		serio_interrupt(dev, byte & 0xff, 0);
+        }
+
+	return IRQ_HANDLED;
+}
+
+static int maceps2_open(struct serio *dev)
+{
+	struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
+
+	if (request_irq(data->irq, maceps2_interrupt, 0, "PS2 port", dev)) {
+		printk(KERN_ERR "Could not allocate PS/2 IRQ\n");
+		return -EBUSY;
+	}
+
+	/* Reset port */
+	data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
+	udelay(100);
+
+        /* Enable interrupts */
+	data->port->control = PS2_CONTROL_RX_CLOCK_ENABLE |
+			      PS2_CONTROL_TX_ENABLE |
+			      PS2_CONTROL_RX_INT_ENABLE;
+
+	return 0;
+}
+
+static void maceps2_close(struct serio *dev)
+{
+	struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
+
+	data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
+	udelay(100);
+	free_irq(data->irq, dev);
+}
+
+
+static struct serio *maceps2_allocate_port(int idx)
+{
+	struct serio *serio;
+
+	serio = kzalloc_obj(*serio);
+	if (serio) {
+		serio->id.type		= SERIO_8042;
+		serio->write		= maceps2_write;
+		serio->open		= maceps2_open;
+		serio->close		= maceps2_close;
+		snprintf(serio->name, sizeof(serio->name), "MACE PS/2 port%d", idx);
+		snprintf(serio->phys, sizeof(serio->phys), "mace/serio%d", idx);
+		serio->port_data	= &port_data[idx];
+		serio->dev.parent	= &maceps2_device->dev;
+	}
+
+	return serio;
+}
+
+static int maceps2_probe(struct platform_device *dev)
+{
+	maceps2_port[0] = maceps2_allocate_port(0);
+	maceps2_port[1] = maceps2_allocate_port(1);
+	if (!maceps2_port[0] || !maceps2_port[1]) {
+		kfree(maceps2_port[0]);
+		kfree(maceps2_port[1]);
+		return -ENOMEM;
+	}
+
+	serio_register_port(maceps2_port[0]);
+	serio_register_port(maceps2_port[1]);
+
+	return 0;
+}
+
+static void maceps2_remove(struct platform_device *dev)
+{
+	serio_unregister_port(maceps2_port[0]);
+	serio_unregister_port(maceps2_port[1]);
+}
+
+static struct platform_driver maceps2_driver = {
+	.driver		= {
+		.name	= "maceps2",
+	},
+	.probe		= maceps2_probe,
+	.remove		= maceps2_remove,
+};
+
+static int __init maceps2_init(void)
+{
+	int error;
+
+	error = platform_driver_register(&maceps2_driver);
+	if (error)
+		return error;
+
+	maceps2_device = platform_device_alloc("maceps2", -1);
+	if (!maceps2_device) {
+		error = -ENOMEM;
+		goto err_unregister_driver;
+	}
+
+	port_data[0].port = &mace->perif.ps2.keyb;
+	port_data[0].irq  = MACEISA_KEYB_IRQ;
+	port_data[1].port = &mace->perif.ps2.mouse;
+	port_data[1].irq  = MACEISA_MOUSE_IRQ;
+
+	error = platform_device_add(maceps2_device);
+	if (error)
+		goto err_free_device;
+
+	return 0;
+
+ err_free_device:
+	platform_device_put(maceps2_device);
+ err_unregister_driver:
+	platform_driver_unregister(&maceps2_driver);
+	return error;
+}
+
+static void __exit maceps2_exit(void)
+{
+	platform_device_unregister(maceps2_device);
+	platform_driver_unregister(&maceps2_driver);
+}
+
+module_init(maceps2_init);
+module_exit(maceps2_exit);
diff --git a/drivers/input/serio/olpc_apsp.c b/drivers/input/serio/olpc_apsp.c
new file mode 100644
index 000000000..ccc40634f
--- /dev/null
+++ b/drivers/input/serio/olpc_apsp.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OLPC serio driver for multiplexed input from Marvell MMP security processor
+ *
+ * Copyright (C) 2011-2013 One Laptop Per Child
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/serio.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+/*
+ * The OLPC XO-1.75 and XO-4 laptops do not have a hardware PS/2 controller.
+ * Instead, the OLPC firmware runs a bit-banging PS/2 implementation on an
+ * otherwise-unused slow processor which is included in the Marvell MMP2/MMP3
+ * SoC, known as the "Security Processor" (SP) or "Wireless Trusted Module"
+ * (WTM). This firmware then reports its results via the WTM registers,
+ * which we read from the Application Processor (AP, i.e. main CPU) in this
+ * driver.
+ *
+ * On the hardware side we have a PS/2 mouse and an AT keyboard, the data
+ * is multiplexed through this system. We create a serio port for each one,
+ * and demultiplex the data accordingly.
+ */
+
+/* WTM register offsets */
+#define SECURE_PROCESSOR_COMMAND	0x40
+#define COMMAND_RETURN_STATUS		0x80
+#define COMMAND_FIFO_STATUS		0xc4
+#define PJ_RST_INTERRUPT		0xc8
+#define PJ_INTERRUPT_MASK		0xcc
+
+/*
+ * The upper byte of SECURE_PROCESSOR_COMMAND and COMMAND_RETURN_STATUS is
+ * used to identify which port (device) is being talked to. The lower byte
+ * is the data being sent/received.
+ */
+#define PORT_MASK	0xff00
+#define DATA_MASK	0x00ff
+#define PORT_SHIFT	8
+#define KEYBOARD_PORT	0
+#define TOUCHPAD_PORT	1
+
+/* COMMAND_FIFO_STATUS */
+#define CMD_CNTR_MASK		0x7 /* Number of pending/unprocessed commands */
+#define MAX_PENDING_CMDS	4   /* from device specs */
+
+/* PJ_RST_INTERRUPT */
+#define SP_COMMAND_COMPLETE_RESET	0x1
+
+/* PJ_INTERRUPT_MASK */
+#define INT_0	(1 << 0)
+
+/* COMMAND_FIFO_STATUS */
+#define CMD_STS_MASK	0x100
+
+struct olpc_apsp {
+	struct device *dev;
+	struct serio *kbio;
+	struct serio *padio;
+	void __iomem *base;
+	int open_count;
+	int irq;
+};
+
+static int olpc_apsp_write(struct serio *port, unsigned char val)
+{
+	struct olpc_apsp *priv = port->port_data;
+	unsigned int i;
+	u32 which = 0;
+
+	if (port == priv->padio)
+		which = TOUCHPAD_PORT << PORT_SHIFT;
+	else
+		which = KEYBOARD_PORT << PORT_SHIFT;
+
+	dev_dbg(priv->dev, "olpc_apsp_write which=%x val=%x\n", which, val);
+	for (i = 0; i < 50; i++) {
+		u32 sts = readl(priv->base + COMMAND_FIFO_STATUS);
+		if ((sts & CMD_CNTR_MASK) < MAX_PENDING_CMDS) {
+			writel(which | val,
+			       priv->base + SECURE_PROCESSOR_COMMAND);
+			return 0;
+		}
+		/* SP busy. This has not been seen in practice. */
+		mdelay(1);
+	}
+
+	dev_dbg(priv->dev, "olpc_apsp_write timeout, status=%x\n",
+		readl(priv->base + COMMAND_FIFO_STATUS));
+
+	return -ETIMEDOUT;
+}
+
+static irqreturn_t olpc_apsp_rx(int irq, void *dev_id)
+{
+	struct olpc_apsp *priv = dev_id;
+	unsigned int w, tmp;
+	struct serio *serio;
+
+	/*
+	 * Write 1 to PJ_RST_INTERRUPT to acknowledge and clear the interrupt
+	 * Write 0xff00 to SECURE_PROCESSOR_COMMAND.
+	 */
+	tmp = readl(priv->base + PJ_RST_INTERRUPT);
+	if (!(tmp & SP_COMMAND_COMPLETE_RESET)) {
+		dev_warn(priv->dev, "spurious interrupt?\n");
+		return IRQ_NONE;
+	}
+
+	w = readl(priv->base + COMMAND_RETURN_STATUS);
+	dev_dbg(priv->dev, "olpc_apsp_rx %x\n", w);
+
+	if (w >> PORT_SHIFT == KEYBOARD_PORT)
+		serio = priv->kbio;
+	else
+		serio = priv->padio;
+
+	serio_interrupt(serio, w & DATA_MASK, 0);
+
+	/* Ack and clear interrupt */
+	writel(tmp | SP_COMMAND_COMPLETE_RESET, priv->base + PJ_RST_INTERRUPT);
+	writel(PORT_MASK, priv->base + SECURE_PROCESSOR_COMMAND);
+
+	pm_wakeup_event(priv->dev, 1000);
+	return IRQ_HANDLED;
+}
+
+static int olpc_apsp_open(struct serio *port)
+{
+	struct olpc_apsp *priv = port->port_data;
+	unsigned int tmp;
+	unsigned long l;
+
+	if (priv->open_count++ == 0) {
+		l = readl(priv->base + COMMAND_FIFO_STATUS);
+		if (!(l & CMD_STS_MASK)) {
+			dev_err(priv->dev, "SP cannot accept commands.\n");
+			return -EIO;
+		}
+
+		/* Enable interrupt 0 by clearing its bit */
+		tmp = readl(priv->base + PJ_INTERRUPT_MASK);
+		writel(tmp & ~INT_0, priv->base + PJ_INTERRUPT_MASK);
+	}
+
+	return 0;
+}
+
+static void olpc_apsp_close(struct serio *port)
+{
+	struct olpc_apsp *priv = port->port_data;
+	unsigned int tmp;
+
+	if (--priv->open_count == 0) {
+		/* Disable interrupt 0 */
+		tmp = readl(priv->base + PJ_INTERRUPT_MASK);
+		writel(tmp | INT_0, priv->base + PJ_INTERRUPT_MASK);
+	}
+}
+
+static int olpc_apsp_probe(struct platform_device *pdev)
+{
+	struct serio *kb_serio, *pad_serio;
+	struct olpc_apsp *priv;
+	int error;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(priv->base)) {
+		dev_err(&pdev->dev, "Failed to map WTM registers\n");
+		return PTR_ERR(priv->base);
+	}
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	/* KEYBOARD */
+	kb_serio = kzalloc_obj(*kb_serio);
+	if (!kb_serio)
+		return -ENOMEM;
+	kb_serio->id.type	= SERIO_8042_XL;
+	kb_serio->write		= olpc_apsp_write;
+	kb_serio->open		= olpc_apsp_open;
+	kb_serio->close		= olpc_apsp_close;
+	kb_serio->port_data	= priv;
+	kb_serio->dev.parent	= &pdev->dev;
+	strscpy(kb_serio->name, "sp keyboard", sizeof(kb_serio->name));
+	strscpy(kb_serio->phys, "sp/serio0", sizeof(kb_serio->phys));
+	priv->kbio		= kb_serio;
+	serio_register_port(kb_serio);
+
+	/* TOUCHPAD */
+	pad_serio = kzalloc_obj(*pad_serio);
+	if (!pad_serio) {
+		error = -ENOMEM;
+		goto err_pad;
+	}
+	pad_serio->id.type	= SERIO_8042;
+	pad_serio->write	= olpc_apsp_write;
+	pad_serio->open		= olpc_apsp_open;
+	pad_serio->close	= olpc_apsp_close;
+	pad_serio->port_data	= priv;
+	pad_serio->dev.parent	= &pdev->dev;
+	strscpy(pad_serio->name, "sp touchpad", sizeof(pad_serio->name));
+	strscpy(pad_serio->phys, "sp/serio1", sizeof(pad_serio->phys));
+	priv->padio		= pad_serio;
+	serio_register_port(pad_serio);
+
+	error = request_irq(priv->irq, olpc_apsp_rx, 0, "olpc-apsp", priv);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request IRQ\n");
+		goto err_irq;
+	}
+
+	device_init_wakeup(priv->dev, 1);
+	platform_set_drvdata(pdev, priv);
+
+	dev_dbg(&pdev->dev, "probed successfully.\n");
+	return 0;
+
+err_irq:
+	serio_unregister_port(pad_serio);
+err_pad:
+	serio_unregister_port(kb_serio);
+	return error;
+}
+
+static void olpc_apsp_remove(struct platform_device *pdev)
+{
+	struct olpc_apsp *priv = platform_get_drvdata(pdev);
+
+	free_irq(priv->irq, priv);
+
+	serio_unregister_port(priv->kbio);
+	serio_unregister_port(priv->padio);
+}
+
+static const struct of_device_id olpc_apsp_dt_ids[] = {
+	{ .compatible = "olpc,ap-sp", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, olpc_apsp_dt_ids);
+
+static struct platform_driver olpc_apsp_driver = {
+	.probe		= olpc_apsp_probe,
+	.remove		= olpc_apsp_remove,
+	.driver		= {
+		.name	= "olpc-apsp",
+		.of_match_table = olpc_apsp_dt_ids,
+	},
+};
+
+MODULE_DESCRIPTION("OLPC AP-SP serio driver");
+MODULE_LICENSE("GPL");
+module_platform_driver(olpc_apsp_driver);
diff --git a/drivers/input/serio/parkbd.c b/drivers/input/serio/parkbd.c
new file mode 100644
index 000000000..09a24413d
--- /dev/null
+++ b/drivers/input/serio/parkbd.c
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Parallel port to Keyboard port adapter driver for Linux
+ *
+ *  Copyright (c) 1999-2004 Vojtech Pavlik
+ */
+
+
+/*
+ * To connect an AT or XT keyboard to the parallel port, a fairly simple adapter
+ * can be made:
+ * 
+ *  Parallel port            Keyboard port
+ *
+ *     +5V --------------------- +5V (4)
+ *  
+ *                 ______
+ *     +5V -------|______|--.
+ *                          |
+ *     ACK (10) ------------|
+ *                          |--- KBD CLOCK (5)
+ *     STROBE (1) ---|<|----'
+ *     
+ *                 ______
+ *     +5V -------|______|--.
+ *                          |
+ *     BUSY (11) -----------|
+ *                          |--- KBD DATA (1)
+ *     AUTOFD (14) --|<|----'
+ *
+ *     GND (18-25) ------------- GND (3)
+ *     
+ * The diodes can be fairly any type, and the resistors should be somewhere
+ * around 5 kOhm, but the adapter will likely work without the resistors,
+ * too.
+ *
+ * The +5V source can be taken either from USB, from mouse or keyboard ports,
+ * or from a joystick port. Unfortunately, the parallel port of a PC doesn't
+ * have a +5V pin, and feeding the keyboard from signal pins is out of question
+ * with 300 mA power reqirement of a typical AT keyboard.
+ */
+
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Parallel port to Keyboard port adapter driver");
+MODULE_LICENSE("GPL");
+
+static unsigned int parkbd_pp_no;
+module_param_named(port, parkbd_pp_no, int, 0);
+MODULE_PARM_DESC(port, "Parallel port the adapter is connected to (default is 0)");
+
+static unsigned int parkbd_mode = SERIO_8042;
+module_param_named(mode, parkbd_mode, uint, 0);
+MODULE_PARM_DESC(mode, "Mode of operation: XT = 0/AT = 1 (default)");
+
+#define PARKBD_CLOCK	0x01	/* Strobe & Ack */
+#define PARKBD_DATA	0x02	/* AutoFd & Busy */
+
+static int parkbd_buffer;
+static int parkbd_counter;
+static unsigned long parkbd_last;
+static int parkbd_writing;
+static unsigned long parkbd_start;
+
+static struct pardevice *parkbd_dev;
+static struct serio *parkbd_port;
+
+static int parkbd_readlines(void)
+{
+	return (parport_read_status(parkbd_dev->port) >> 6) ^ 2;
+}
+
+static void parkbd_writelines(int data)
+{
+	parport_write_control(parkbd_dev->port, (~data & 3) | 0x10);
+}
+
+static int parkbd_write(struct serio *port, unsigned char c)
+{
+	unsigned char p;
+
+	if (!parkbd_mode) return -1;
+
+        p = c ^ (c >> 4);
+	p = p ^ (p >> 2);
+	p = p ^ (p >> 1);
+
+	parkbd_counter = 0;
+	parkbd_writing = 1;
+	parkbd_buffer = c | (((int) (~p & 1)) << 8) | 0x600;
+
+	parkbd_writelines(2);
+
+	return 0;
+}
+
+static void parkbd_interrupt(void *dev_id)
+{
+
+	if (parkbd_writing) {
+
+		if (parkbd_counter && ((parkbd_counter == 11) || time_after(jiffies, parkbd_last + HZ/100))) {
+			parkbd_counter = 0;
+			parkbd_buffer = 0;
+			parkbd_writing = 0;
+			parkbd_writelines(3);
+			return;
+		}
+
+		parkbd_writelines(((parkbd_buffer >> parkbd_counter++) & 1) | 2);
+
+		if (parkbd_counter == 11) {
+			parkbd_counter = 0;
+			parkbd_buffer = 0;
+			parkbd_writing = 0;
+			parkbd_writelines(3);
+		}
+
+	} else {
+
+		if ((parkbd_counter == parkbd_mode + 10) || time_after(jiffies, parkbd_last + HZ/100)) {
+			parkbd_counter = 0;
+			parkbd_buffer = 0;
+		}
+
+		parkbd_buffer |= (parkbd_readlines() >> 1) << parkbd_counter++;
+
+		if (parkbd_counter == parkbd_mode + 10)
+			serio_interrupt(parkbd_port, (parkbd_buffer >> (2 - parkbd_mode)) & 0xff, 0);
+	}
+
+	parkbd_last = jiffies;
+}
+
+static int parkbd_getport(struct parport *pp)
+{
+	struct pardev_cb parkbd_parport_cb;
+
+	memset(&parkbd_parport_cb, 0, sizeof(parkbd_parport_cb));
+	parkbd_parport_cb.irq_func = parkbd_interrupt;
+	parkbd_parport_cb.flags = PARPORT_FLAG_EXCL;
+
+	parkbd_dev = parport_register_dev_model(pp, "parkbd",
+						&parkbd_parport_cb, 0);
+
+	if (!parkbd_dev)
+		return -ENODEV;
+
+	if (parport_claim(parkbd_dev)) {
+		parport_unregister_device(parkbd_dev);
+		return -EBUSY;
+	}
+
+	parkbd_start = jiffies;
+
+	return 0;
+}
+
+static struct serio *parkbd_allocate_serio(void)
+{
+	struct serio *serio;
+
+	serio = kzalloc_obj(*serio);
+	if (serio) {
+		serio->id.type = parkbd_mode;
+		serio->write = parkbd_write;
+		strscpy(serio->name, "PARKBD AT/XT keyboard adapter", sizeof(serio->name));
+		snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", parkbd_dev->port->name);
+	}
+
+	return serio;
+}
+
+static void parkbd_attach(struct parport *pp)
+{
+	if (pp->number != parkbd_pp_no) {
+		pr_debug("Not using parport%d.\n", pp->number);
+		return;
+	}
+
+	if (parkbd_getport(pp))
+		return;
+
+	parkbd_port = parkbd_allocate_serio();
+	if (!parkbd_port) {
+		parport_release(parkbd_dev);
+		parport_unregister_device(parkbd_dev);
+		return;
+	}
+
+	parkbd_writelines(3);
+
+	serio_register_port(parkbd_port);
+
+	printk(KERN_INFO "serio: PARKBD %s adapter on %s\n",
+                        parkbd_mode ? "AT" : "XT", parkbd_dev->port->name);
+
+	return;
+}
+
+static void parkbd_detach(struct parport *port)
+{
+	if (!parkbd_port || port->number != parkbd_pp_no)
+		return;
+
+	parport_release(parkbd_dev);
+	serio_unregister_port(parkbd_port);
+	parport_unregister_device(parkbd_dev);
+	parkbd_port = NULL;
+}
+
+static struct parport_driver parkbd_parport_driver = {
+	.name = "parkbd",
+	.match_port = parkbd_attach,
+	.detach = parkbd_detach,
+};
+module_parport_driver(parkbd_parport_driver);
diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c
new file mode 100644
index 000000000..78f47b0ca
--- /dev/null
+++ b/drivers/input/serio/pcips2.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/input/serio/pcips2.c
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ *  I'm not sure if this is a generic PS/2 PCI interface or specific to
+ *  the Mobility Electronics docking station.
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/input.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/serio.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#define PS2_CTRL		(0)
+#define PS2_STATUS		(1)
+#define PS2_DATA		(2)
+
+#define PS2_CTRL_CLK		(1<<0)
+#define PS2_CTRL_DAT		(1<<1)
+#define PS2_CTRL_TXIRQ		(1<<2)
+#define PS2_CTRL_ENABLE		(1<<3)
+#define PS2_CTRL_RXIRQ		(1<<4)
+
+#define PS2_STAT_CLK		(1<<0)
+#define PS2_STAT_DAT		(1<<1)
+#define PS2_STAT_PARITY		(1<<2)
+#define PS2_STAT_RXFULL		(1<<5)
+#define PS2_STAT_TXBUSY		(1<<6)
+#define PS2_STAT_TXEMPTY	(1<<7)
+
+struct pcips2_data {
+	struct serio	*io;
+	unsigned int	base;
+	struct pci_dev	*dev;
+};
+
+static int pcips2_write(struct serio *io, unsigned char val)
+{
+	struct pcips2_data *ps2if = io->port_data;
+	unsigned int stat;
+
+	do {
+		stat = inb(ps2if->base + PS2_STATUS);
+		cpu_relax();
+	} while (!(stat & PS2_STAT_TXEMPTY));
+
+	outb(val, ps2if->base + PS2_DATA);
+
+	return 0;
+}
+
+static irqreturn_t pcips2_interrupt(int irq, void *devid)
+{
+	struct pcips2_data *ps2if = devid;
+	unsigned char status, scancode;
+	int handled = 0;
+
+	do {
+		unsigned int flag;
+
+		status = inb(ps2if->base + PS2_STATUS);
+		if (!(status & PS2_STAT_RXFULL))
+			break;
+		handled = 1;
+		scancode = inb(ps2if->base + PS2_DATA);
+		if (status == 0xff && scancode == 0xff)
+			break;
+
+		flag = (status & PS2_STAT_PARITY) ? 0 : SERIO_PARITY;
+
+		if (hweight8(scancode) & 1)
+			flag ^= SERIO_PARITY;
+
+		serio_interrupt(ps2if->io, scancode, flag);
+	} while (1);
+	return IRQ_RETVAL(handled);
+}
+
+static void pcips2_flush_input(struct pcips2_data *ps2if)
+{
+	unsigned char status, scancode;
+
+	do {
+		status = inb(ps2if->base + PS2_STATUS);
+		if (!(status & PS2_STAT_RXFULL))
+			break;
+		scancode = inb(ps2if->base + PS2_DATA);
+		if (status == 0xff && scancode == 0xff)
+			break;
+	} while (1);
+}
+
+static int pcips2_open(struct serio *io)
+{
+	struct pcips2_data *ps2if = io->port_data;
+	int ret, val = 0;
+
+	outb(PS2_CTRL_ENABLE, ps2if->base);
+	pcips2_flush_input(ps2if);
+
+	ret = request_irq(ps2if->dev->irq, pcips2_interrupt, IRQF_SHARED,
+			  "pcips2", ps2if);
+	if (ret == 0)
+		val = PS2_CTRL_ENABLE | PS2_CTRL_RXIRQ;
+
+	outb(val, ps2if->base);
+
+	return ret;
+}
+
+static void pcips2_close(struct serio *io)
+{
+	struct pcips2_data *ps2if = io->port_data;
+
+	outb(0, ps2if->base);
+
+	free_irq(ps2if->dev->irq, ps2if);
+}
+
+static int pcips2_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct pcips2_data *ps2if;
+	struct serio *serio;
+	int ret;
+
+	ret = pci_enable_device(dev);
+	if (ret)
+		goto out;
+
+	ret = pci_request_regions(dev, "pcips2");
+	if (ret)
+		goto disable;
+
+	ps2if = kzalloc_obj(*ps2if);
+	serio = kzalloc_obj(*serio);
+	if (!ps2if || !serio) {
+		ret = -ENOMEM;
+		goto release;
+	}
+
+
+	serio->id.type		= SERIO_8042;
+	serio->write		= pcips2_write;
+	serio->open		= pcips2_open;
+	serio->close		= pcips2_close;
+	strscpy(serio->name, pci_name(dev), sizeof(serio->name));
+	strscpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
+	serio->port_data	= ps2if;
+	serio->dev.parent	= &dev->dev;
+	ps2if->io		= serio;
+	ps2if->dev		= dev;
+	ps2if->base		= pci_resource_start(dev, 0);
+
+	pci_set_drvdata(dev, ps2if);
+
+	serio_register_port(ps2if->io);
+	return 0;
+
+ release:
+	kfree(ps2if);
+	kfree(serio);
+	pci_release_regions(dev);
+ disable:
+	pci_disable_device(dev);
+ out:
+	return ret;
+}
+
+static void pcips2_remove(struct pci_dev *dev)
+{
+	struct pcips2_data *ps2if = pci_get_drvdata(dev);
+
+	serio_unregister_port(ps2if->io);
+	kfree(ps2if);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+}
+
+static const struct pci_device_id pcips2_ids[] = {
+	{
+		.vendor		= 0x14f2,	/* MOBILITY */
+		.device		= 0x0123,	/* Keyboard */
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.class		= PCI_CLASS_INPUT_KEYBOARD << 8,
+		.class_mask	= 0xffff00,
+	},
+	{
+		.vendor		= 0x14f2,	/* MOBILITY */
+		.device		= 0x0124,	/* Mouse */
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.class		= PCI_CLASS_INPUT_MOUSE << 8,
+		.class_mask	= 0xffff00,
+	},
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, pcips2_ids);
+
+static struct pci_driver pcips2_driver = {
+	.name			= "pcips2",
+	.id_table		= pcips2_ids,
+	.probe			= pcips2_probe,
+	.remove			= pcips2_remove,
+};
+
+module_pci_driver(pcips2_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("PCI PS/2 keyboard/mouse driver");
diff --git a/drivers/input/serio/ps2-gpio.c b/drivers/input/serio/ps2-gpio.c
new file mode 100644
index 000000000..6cde0d88c
--- /dev/null
+++ b/drivers/input/serio/ps2-gpio.c
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO based serio bus driver for bit banging the PS/2 protocol
+ *
+ * Author: Danilo Krummrich <danilokrummrich@dk-develop.de>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/preempt.h>
+#include <linux/property.h>
+#include <linux/of.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/timekeeping.h>
+
+#define DRIVER_NAME		"ps2-gpio"
+
+#define PS2_MODE_RX		0
+#define PS2_MODE_TX		1
+
+#define PS2_START_BIT		0
+#define PS2_DATA_BIT0		1
+#define PS2_DATA_BIT1		2
+#define PS2_DATA_BIT2		3
+#define PS2_DATA_BIT3		4
+#define PS2_DATA_BIT4		5
+#define PS2_DATA_BIT5		6
+#define PS2_DATA_BIT6		7
+#define PS2_DATA_BIT7		8
+#define PS2_PARITY_BIT		9
+#define PS2_STOP_BIT		10
+#define PS2_ACK_BIT		11
+
+#define PS2_DEV_RET_ACK		0xfa
+#define PS2_DEV_RET_NACK	0xfe
+
+#define PS2_CMD_RESEND		0xfe
+
+/*
+ * The PS2 protocol specifies a clock frequency between 10kHz and 16.7kHz,
+ * therefore the maximal interrupt interval should be 100us and the minimum
+ * interrupt interval should be ~60us. Let's allow +/- 20us for frequency
+ * deviations and interrupt latency.
+ *
+ * The data line must be sampled after ~30us to 50us after the falling edge,
+ * since the device updates the data line at the rising edge.
+ *
+ * ___            ______            ______            ______            ___
+ *    \          /      \          /      \          /      \          /
+ *     \        /        \        /        \        /        \        /
+ *      \______/          \______/          \______/          \______/
+ *
+ *     |-----------------|                 |--------|
+ *          60us/100us                      30us/50us
+ */
+#define PS2_CLK_FREQ_MIN_HZ		10000
+#define PS2_CLK_FREQ_MAX_HZ		16700
+#define PS2_CLK_MIN_INTERVAL_US		((1000 * 1000) / PS2_CLK_FREQ_MAX_HZ)
+#define PS2_CLK_MAX_INTERVAL_US		((1000 * 1000) / PS2_CLK_FREQ_MIN_HZ)
+#define PS2_IRQ_MIN_INTERVAL_US		(PS2_CLK_MIN_INTERVAL_US - 20)
+#define PS2_IRQ_MAX_INTERVAL_US		(PS2_CLK_MAX_INTERVAL_US + 20)
+
+struct ps2_gpio_data {
+	struct device *dev;
+	struct serio *serio;
+	unsigned char mode;
+	struct gpio_desc *gpio_clk;
+	struct gpio_desc *gpio_data;
+	bool write_enable;
+	int irq;
+	ktime_t t_irq_now;
+	ktime_t t_irq_last;
+	struct {
+		unsigned char cnt;
+		unsigned char byte;
+	} rx;
+	struct {
+		unsigned char cnt;
+		unsigned char byte;
+		ktime_t t_xfer_start;
+		ktime_t t_xfer_end;
+		struct completion complete;
+		struct mutex mutex;
+		struct delayed_work work;
+	} tx;
+};
+
+static int ps2_gpio_open(struct serio *serio)
+{
+	struct ps2_gpio_data *drvdata = serio->port_data;
+
+	drvdata->t_irq_last = 0;
+	drvdata->tx.t_xfer_end = 0;
+
+	enable_irq(drvdata->irq);
+	return 0;
+}
+
+static void ps2_gpio_close(struct serio *serio)
+{
+	struct ps2_gpio_data *drvdata = serio->port_data;
+
+	flush_delayed_work(&drvdata->tx.work);
+	disable_irq(drvdata->irq);
+}
+
+static int __ps2_gpio_write(struct serio *serio, unsigned char val)
+{
+	struct ps2_gpio_data *drvdata = serio->port_data;
+
+	disable_irq_nosync(drvdata->irq);
+	gpiod_direction_output(drvdata->gpio_clk, 0);
+
+	drvdata->mode = PS2_MODE_TX;
+	drvdata->tx.byte = val;
+
+	schedule_delayed_work(&drvdata->tx.work, usecs_to_jiffies(200));
+
+	return 0;
+}
+
+static int ps2_gpio_write(struct serio *serio, unsigned char val)
+{
+	struct ps2_gpio_data *drvdata = serio->port_data;
+	int ret = 0;
+
+	if (in_task()) {
+		guard(mutex)(&drvdata->tx.mutex);
+
+		__ps2_gpio_write(serio, val);
+		if (!wait_for_completion_timeout(&drvdata->tx.complete,
+						 msecs_to_jiffies(10000)))
+			ret = SERIO_TIMEOUT;
+	} else {
+		__ps2_gpio_write(serio, val);
+	}
+
+	return ret;
+}
+
+static void ps2_gpio_tx_work_fn(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct ps2_gpio_data *drvdata = container_of(dwork,
+						     struct ps2_gpio_data,
+						     tx.work);
+
+	drvdata->tx.t_xfer_start = ktime_get();
+	enable_irq(drvdata->irq);
+	gpiod_direction_output(drvdata->gpio_data, 0);
+	gpiod_direction_input(drvdata->gpio_clk);
+}
+
+static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata)
+{
+	unsigned char byte, cnt;
+	int data;
+	int rxflags = 0;
+	s64 us_delta;
+
+	byte = drvdata->rx.byte;
+	cnt = drvdata->rx.cnt;
+
+	drvdata->t_irq_now = ktime_get();
+
+	/*
+	 * We need to consider spurious interrupts happening right after
+	 * a TX xfer finished.
+	 */
+	us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->tx.t_xfer_end);
+	if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US))
+		goto end;
+
+	us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->t_irq_last);
+	if (us_delta > PS2_IRQ_MAX_INTERVAL_US && cnt) {
+		dev_err(drvdata->dev,
+			"RX: timeout, probably we missed an interrupt\n");
+		goto err;
+	} else if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US)) {
+		/* Ignore spurious IRQs. */
+		goto end;
+	}
+	drvdata->t_irq_last = drvdata->t_irq_now;
+
+	data = gpiod_get_value(drvdata->gpio_data);
+	if (unlikely(data < 0)) {
+		dev_err(drvdata->dev, "RX: failed to get data gpio val: %d\n",
+			data);
+		goto err;
+	}
+
+	switch (cnt) {
+	case PS2_START_BIT:
+		/* start bit should be low */
+		if (unlikely(data)) {
+			dev_err(drvdata->dev, "RX: start bit should be low\n");
+			goto err;
+		}
+		break;
+	case PS2_DATA_BIT0:
+	case PS2_DATA_BIT1:
+	case PS2_DATA_BIT2:
+	case PS2_DATA_BIT3:
+	case PS2_DATA_BIT4:
+	case PS2_DATA_BIT5:
+	case PS2_DATA_BIT6:
+	case PS2_DATA_BIT7:
+		/* processing data bits */
+		if (data)
+			byte |= (data << (cnt - 1));
+		break;
+	case PS2_PARITY_BIT:
+		/* check odd parity */
+		if (!((hweight8(byte) & 1) ^ data)) {
+			rxflags |= SERIO_PARITY;
+			dev_warn(drvdata->dev, "RX: parity error\n");
+			if (!drvdata->write_enable)
+				goto err;
+		}
+		break;
+	case PS2_STOP_BIT:
+		/* stop bit should be high */
+		if (unlikely(!data)) {
+			dev_err(drvdata->dev, "RX: stop bit should be high\n");
+			goto err;
+		}
+
+		/*
+		 * Do not send spurious ACK's and NACK's when write fn is
+		 * not provided.
+		 */
+		if (!drvdata->write_enable) {
+			if (byte == PS2_DEV_RET_NACK)
+				goto err;
+			else if (byte == PS2_DEV_RET_ACK)
+				break;
+		}
+
+		serio_interrupt(drvdata->serio, byte, rxflags);
+		dev_dbg(drvdata->dev, "RX: sending byte 0x%x\n", byte);
+
+		cnt = byte = 0;
+
+		goto end; /* success */
+	default:
+		dev_err(drvdata->dev, "RX: got out of sync with the device\n");
+		goto err;
+	}
+
+	cnt++;
+	goto end; /* success */
+
+err:
+	cnt = byte = 0;
+	__ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND);
+end:
+	drvdata->rx.cnt = cnt;
+	drvdata->rx.byte = byte;
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata)
+{
+	unsigned char byte, cnt;
+	int data;
+	s64 us_delta;
+
+	cnt = drvdata->tx.cnt;
+	byte = drvdata->tx.byte;
+
+	drvdata->t_irq_now = ktime_get();
+
+	/*
+	 * There might be pending IRQs since we disabled IRQs in
+	 * __ps2_gpio_write().  We can expect at least one clock period until
+	 * the device generates the first falling edge after releasing the
+	 * clock line.
+	 */
+	us_delta = ktime_us_delta(drvdata->t_irq_now,
+				  drvdata->tx.t_xfer_start);
+	if (unlikely(us_delta < PS2_CLK_MIN_INTERVAL_US))
+		goto end;
+
+	us_delta = ktime_us_delta(drvdata->t_irq_now, drvdata->t_irq_last);
+	if (us_delta > PS2_IRQ_MAX_INTERVAL_US && cnt > 1) {
+		dev_err(drvdata->dev,
+			"TX: timeout, probably we missed an interrupt\n");
+		goto err;
+	} else if (unlikely(us_delta < PS2_IRQ_MIN_INTERVAL_US)) {
+		/* Ignore spurious IRQs. */
+		goto end;
+	}
+	drvdata->t_irq_last = drvdata->t_irq_now;
+
+	switch (cnt) {
+	case PS2_START_BIT:
+		/* should never happen */
+		dev_err(drvdata->dev,
+			"TX: start bit should have been sent already\n");
+		goto err;
+	case PS2_DATA_BIT0:
+	case PS2_DATA_BIT1:
+	case PS2_DATA_BIT2:
+	case PS2_DATA_BIT3:
+	case PS2_DATA_BIT4:
+	case PS2_DATA_BIT5:
+	case PS2_DATA_BIT6:
+	case PS2_DATA_BIT7:
+		data = byte & BIT(cnt - 1);
+		gpiod_set_value(drvdata->gpio_data, data);
+		break;
+	case PS2_PARITY_BIT:
+		/* do odd parity */
+		data = !(hweight8(byte) & 1);
+		gpiod_set_value(drvdata->gpio_data, data);
+		break;
+	case PS2_STOP_BIT:
+		/* release data line to generate stop bit */
+		gpiod_direction_input(drvdata->gpio_data);
+		break;
+	case PS2_ACK_BIT:
+		data = gpiod_get_value(drvdata->gpio_data);
+		if (data) {
+			dev_warn(drvdata->dev, "TX: received NACK, retry\n");
+			goto err;
+		}
+
+		drvdata->tx.t_xfer_end = ktime_get();
+		drvdata->mode = PS2_MODE_RX;
+		complete(&drvdata->tx.complete);
+
+		cnt = 1;
+		goto end; /* success */
+	default:
+		/*
+		 * Probably we missed the stop bit. Therefore we release data
+		 * line and try again.
+		 */
+		gpiod_direction_input(drvdata->gpio_data);
+		dev_err(drvdata->dev, "TX: got out of sync with the device\n");
+		goto err;
+	}
+
+	cnt++;
+	goto end; /* success */
+
+err:
+	cnt = 1;
+	gpiod_direction_input(drvdata->gpio_data);
+	__ps2_gpio_write(drvdata->serio, drvdata->tx.byte);
+end:
+	drvdata->tx.cnt = cnt;
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ps2_gpio_irq(int irq, void *dev_id)
+{
+	struct ps2_gpio_data *drvdata = dev_id;
+
+	return drvdata->mode ? ps2_gpio_irq_tx(drvdata) :
+		ps2_gpio_irq_rx(drvdata);
+}
+
+static int ps2_gpio_get_props(struct device *dev,
+				 struct ps2_gpio_data *drvdata)
+{
+	enum gpiod_flags gflags;
+
+	/* Enforce open drain, since this is required by the PS/2 bus. */
+	gflags = GPIOD_IN | GPIOD_FLAGS_BIT_OPEN_DRAIN;
+
+	drvdata->gpio_data = devm_gpiod_get(dev, "data", gflags);
+	if (IS_ERR(drvdata->gpio_data)) {
+		dev_err(dev, "failed to request data gpio: %ld",
+			PTR_ERR(drvdata->gpio_data));
+		return PTR_ERR(drvdata->gpio_data);
+	}
+
+	drvdata->gpio_clk = devm_gpiod_get(dev, "clk", gflags);
+	if (IS_ERR(drvdata->gpio_clk)) {
+		dev_err(dev, "failed to request clock gpio: %ld",
+			PTR_ERR(drvdata->gpio_clk));
+		return PTR_ERR(drvdata->gpio_clk);
+	}
+
+	drvdata->write_enable = device_property_read_bool(dev,
+				"write-enable");
+
+	return 0;
+}
+
+static int ps2_gpio_probe(struct platform_device *pdev)
+{
+	struct ps2_gpio_data *drvdata;
+	struct serio *serio;
+	struct device *dev = &pdev->dev;
+	int error;
+
+	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+	serio = kzalloc_obj(*serio);
+	if (!drvdata || !serio) {
+		error = -ENOMEM;
+		goto err_free_serio;
+	}
+
+	error = ps2_gpio_get_props(dev, drvdata);
+	if (error)
+		goto err_free_serio;
+
+	if (gpiod_cansleep(drvdata->gpio_data) ||
+	    gpiod_cansleep(drvdata->gpio_clk)) {
+		dev_err(dev, "GPIO data or clk are connected via slow bus\n");
+		error = -EINVAL;
+		goto err_free_serio;
+	}
+
+	drvdata->irq = platform_get_irq(pdev, 0);
+	if (drvdata->irq < 0) {
+		error = drvdata->irq;
+		goto err_free_serio;
+	}
+
+	error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq,
+				 IRQF_NO_THREAD | IRQF_NO_AUTOEN, DRIVER_NAME,
+				 drvdata);
+	if (error) {
+		dev_err(dev, "failed to request irq %d: %d\n",
+			drvdata->irq, error);
+		goto err_free_serio;
+	}
+
+	serio->id.type = SERIO_8042;
+	serio->open = ps2_gpio_open;
+	serio->close = ps2_gpio_close;
+	/*
+	 * Write can be enabled in platform/dt data, but possibly it will not
+	 * work because of the tough timings.
+	 */
+	serio->write = drvdata->write_enable ? ps2_gpio_write : NULL;
+	serio->port_data = drvdata;
+	serio->dev.parent = dev;
+	strscpy(serio->name, dev_name(dev), sizeof(serio->name));
+	strscpy(serio->phys, dev_name(dev), sizeof(serio->phys));
+
+	drvdata->serio = serio;
+	drvdata->dev = dev;
+	drvdata->mode = PS2_MODE_RX;
+
+	/*
+	 * Tx count always starts at 1, as the start bit is sent implicitly by
+	 * host-to-device communication initialization.
+	 */
+	drvdata->tx.cnt = 1;
+
+	INIT_DELAYED_WORK(&drvdata->tx.work, ps2_gpio_tx_work_fn);
+	init_completion(&drvdata->tx.complete);
+	mutex_init(&drvdata->tx.mutex);
+
+	serio_register_port(serio);
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;	/* success */
+
+err_free_serio:
+	kfree(serio);
+	return error;
+}
+
+static void ps2_gpio_remove(struct platform_device *pdev)
+{
+	struct ps2_gpio_data *drvdata = platform_get_drvdata(pdev);
+
+	serio_unregister_port(drvdata->serio);
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id ps2_gpio_match[] = {
+	{ .compatible = "ps2-gpio", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ps2_gpio_match);
+#endif
+
+static struct platform_driver ps2_gpio_driver = {
+	.probe		= ps2_gpio_probe,
+	.remove		= ps2_gpio_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = of_match_ptr(ps2_gpio_match),
+	},
+};
+module_platform_driver(ps2_gpio_driver);
+
+MODULE_AUTHOR("Danilo Krummrich <danilokrummrich@dk-develop.de>");
+MODULE_DESCRIPTION("GPIO PS2 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/serio/ps2mult.c b/drivers/input/serio/ps2mult.c
new file mode 100644
index 000000000..27d554b59
--- /dev/null
+++ b/drivers/input/serio/ps2mult.c
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TQC PS/2 Multiplexer driver
+ *
+ * Copyright (C) 2010 Dmitry Eremin-Solenikov
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+
+MODULE_AUTHOR("Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>");
+MODULE_DESCRIPTION("TQC PS/2 Multiplexer driver");
+MODULE_LICENSE("GPL");
+
+#define PS2MULT_KB_SELECTOR		0xA0
+#define PS2MULT_MS_SELECTOR		0xA1
+#define PS2MULT_ESCAPE			0x7D
+#define PS2MULT_BSYNC			0x7E
+#define PS2MULT_SESSION_START		0x55
+#define PS2MULT_SESSION_END		0x56
+
+struct ps2mult_port {
+	struct serio *serio;
+	unsigned char sel;
+	bool registered;
+};
+
+#define PS2MULT_NUM_PORTS	2
+#define PS2MULT_KBD_PORT	0
+#define PS2MULT_MOUSE_PORT	1
+
+struct ps2mult {
+	struct serio *mx_serio;
+	struct ps2mult_port ports[PS2MULT_NUM_PORTS];
+
+	spinlock_t lock;
+	struct ps2mult_port *in_port;
+	struct ps2mult_port *out_port;
+	bool escape;
+};
+
+/* First MUST come PS2MULT_NUM_PORTS selectors */
+static const unsigned char ps2mult_controls[] = {
+	PS2MULT_KB_SELECTOR, PS2MULT_MS_SELECTOR,
+	PS2MULT_ESCAPE, PS2MULT_BSYNC,
+	PS2MULT_SESSION_START, PS2MULT_SESSION_END,
+};
+
+static const struct serio_device_id ps2mult_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_PS2MULT,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, ps2mult_serio_ids);
+
+static void ps2mult_select_port(struct ps2mult *psm, struct ps2mult_port *port)
+{
+	struct serio *mx_serio = psm->mx_serio;
+
+	serio_write(mx_serio, port->sel);
+	psm->out_port = port;
+	dev_dbg(&mx_serio->dev, "switched to sel %02x\n", port->sel);
+}
+
+static int ps2mult_serio_write(struct serio *serio, unsigned char data)
+{
+	struct serio *mx_port = serio->parent;
+	struct ps2mult *psm = serio_get_drvdata(mx_port);
+	struct ps2mult_port *port = serio->port_data;
+	bool need_escape;
+
+	guard(spinlock_irqsave)(&psm->lock);
+
+	if (psm->out_port != port)
+		ps2mult_select_port(psm, port);
+
+	need_escape = memchr(ps2mult_controls, data, sizeof(ps2mult_controls));
+
+	dev_dbg(&serio->dev,
+		"write: %s%02x\n", need_escape ? "ESC " : "", data);
+
+	if (need_escape)
+		serio_write(mx_port, PS2MULT_ESCAPE);
+
+	serio_write(mx_port, data);
+
+	return 0;
+}
+
+static int ps2mult_serio_start(struct serio *serio)
+{
+	struct ps2mult *psm = serio_get_drvdata(serio->parent);
+	struct ps2mult_port *port = serio->port_data;
+
+	guard(spinlock_irqsave)(&psm->lock);
+
+	port->registered = true;
+
+	return 0;
+}
+
+static void ps2mult_serio_stop(struct serio *serio)
+{
+	struct ps2mult *psm = serio_get_drvdata(serio->parent);
+	struct ps2mult_port *port = serio->port_data;
+
+	guard(spinlock_irqsave)(&psm->lock);
+
+	port->registered = false;
+}
+
+static int ps2mult_create_port(struct ps2mult *psm, int i)
+{
+	struct serio *mx_serio = psm->mx_serio;
+	struct serio *serio;
+
+	serio = kzalloc_obj(*serio);
+	if (!serio)
+		return -ENOMEM;
+
+	strscpy(serio->name, "TQC PS/2 Multiplexer", sizeof(serio->name));
+	snprintf(serio->phys, sizeof(serio->phys),
+		 "%s/port%d", mx_serio->phys, i);
+	serio->id.type = SERIO_8042;
+	serio->write = ps2mult_serio_write;
+	serio->start = ps2mult_serio_start;
+	serio->stop = ps2mult_serio_stop;
+	serio->parent = psm->mx_serio;
+	serio->port_data = &psm->ports[i];
+
+	psm->ports[i].serio = serio;
+
+	return 0;
+}
+
+static void ps2mult_reset(struct ps2mult *psm)
+{
+	guard(spinlock_irqsave)(&psm->lock);
+
+	serio_write(psm->mx_serio, PS2MULT_SESSION_END);
+	serio_write(psm->mx_serio, PS2MULT_SESSION_START);
+
+	ps2mult_select_port(psm, &psm->ports[PS2MULT_KBD_PORT]);
+}
+
+static int ps2mult_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct ps2mult *psm;
+	int i;
+	int error;
+
+	if (!serio->write)
+		return -EINVAL;
+
+	psm = kzalloc_obj(*psm);
+	if (!psm)
+		return -ENOMEM;
+
+	spin_lock_init(&psm->lock);
+	psm->mx_serio = serio;
+
+	for (i = 0; i < PS2MULT_NUM_PORTS; i++) {
+		psm->ports[i].sel = ps2mult_controls[i];
+		error = ps2mult_create_port(psm, i);
+		if (error)
+			goto err_out;
+	}
+
+	psm->in_port = psm->out_port = &psm->ports[PS2MULT_KBD_PORT];
+
+	serio_set_drvdata(serio, psm);
+	error = serio_open(serio, drv);
+	if (error)
+		goto err_out;
+
+	ps2mult_reset(psm);
+
+	for (i = 0; i <  PS2MULT_NUM_PORTS; i++) {
+		struct serio *s = psm->ports[i].serio;
+
+		dev_info(&serio->dev, "%s port at %s\n", s->name, serio->phys);
+		serio_register_port(s);
+	}
+
+	return 0;
+
+err_out:
+	while (--i >= 0)
+		kfree(psm->ports[i].serio);
+	kfree(psm);
+	return error;
+}
+
+static void ps2mult_disconnect(struct serio *serio)
+{
+	struct ps2mult *psm = serio_get_drvdata(serio);
+
+	/* Note that serio core already take care of children ports */
+	serio_write(serio, PS2MULT_SESSION_END);
+	serio_close(serio);
+	kfree(psm);
+
+	serio_set_drvdata(serio, NULL);
+}
+
+static int ps2mult_reconnect(struct serio *serio)
+{
+	struct ps2mult *psm = serio_get_drvdata(serio);
+
+	ps2mult_reset(psm);
+
+	return 0;
+}
+
+static irqreturn_t ps2mult_interrupt(struct serio *serio,
+				     unsigned char data, unsigned int dfl)
+{
+	struct ps2mult *psm = serio_get_drvdata(serio);
+	struct ps2mult_port *in_port;
+
+	dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, dfl);
+
+	guard(spinlock_irqsave)(&psm->lock);
+
+	if (psm->escape) {
+		psm->escape = false;
+		in_port = psm->in_port;
+		if (in_port->registered)
+			serio_interrupt(in_port->serio, data, dfl);
+		goto out;
+	}
+
+	switch (data) {
+	case PS2MULT_ESCAPE:
+		dev_dbg(&serio->dev, "ESCAPE\n");
+		psm->escape = true;
+		break;
+
+	case PS2MULT_BSYNC:
+		dev_dbg(&serio->dev, "BSYNC\n");
+		psm->in_port = psm->out_port;
+		break;
+
+	case PS2MULT_SESSION_START:
+		dev_dbg(&serio->dev, "SS\n");
+		break;
+
+	case PS2MULT_SESSION_END:
+		dev_dbg(&serio->dev, "SE\n");
+		break;
+
+	case PS2MULT_KB_SELECTOR:
+		dev_dbg(&serio->dev, "KB\n");
+		psm->in_port = &psm->ports[PS2MULT_KBD_PORT];
+		break;
+
+	case PS2MULT_MS_SELECTOR:
+		dev_dbg(&serio->dev, "MS\n");
+		psm->in_port = &psm->ports[PS2MULT_MOUSE_PORT];
+		break;
+
+	default:
+		in_port = psm->in_port;
+		if (in_port->registered)
+			serio_interrupt(in_port->serio, data, dfl);
+		break;
+	}
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static struct serio_driver ps2mult_drv = {
+	.driver		= {
+		.name	= "ps2mult",
+	},
+	.description	= "TQC PS/2 Multiplexer driver",
+	.id_table	= ps2mult_serio_ids,
+	.interrupt	= ps2mult_interrupt,
+	.connect	= ps2mult_connect,
+	.disconnect	= ps2mult_disconnect,
+	.reconnect	= ps2mult_reconnect,
+};
+
+module_serio_driver(ps2mult_drv);
diff --git a/drivers/input/serio/q40kbd.c b/drivers/input/serio/q40kbd.c
new file mode 100644
index 000000000..2f553efbe
--- /dev/null
+++ b/drivers/input/serio/q40kbd.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *
+ *  Based on the work of:
+ *	Richard Zidlicky <Richard.Zidlicky@stud.informatik.uni-erlangen.de>
+ */
+
+/*
+ * Q40 PS/2 keyboard controller driver for Linux/m68k
+ */
+
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <asm/q40_master.h>
+#include <asm/irq.h>
+#include <asm/q40ints.h>
+
+#define DRV_NAME	"q40kbd"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Q40 PS/2 keyboard controller driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+struct q40kbd {
+	struct serio *port;
+	spinlock_t lock;
+};
+
+static irqreturn_t q40kbd_interrupt(int irq, void *dev_id)
+{
+	struct q40kbd *q40kbd = dev_id;
+
+	guard(spinlock_irqsave)(&q40kbd->lock);
+
+	if (Q40_IRQ_KEYB_MASK & master_inb(INTERRUPT_REG))
+		serio_interrupt(q40kbd->port, master_inb(KEYCODE_REG), 0);
+
+	master_outb(-1, KEYBOARD_UNLOCK_REG);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * q40kbd_flush() flushes all data that may be in the keyboard buffers
+ */
+
+static void q40kbd_flush(struct q40kbd *q40kbd)
+{
+	int maxread = 100;
+
+	guard(spinlock_irqsave)(&q40kbd->lock);
+
+	while (maxread-- && (Q40_IRQ_KEYB_MASK & master_inb(INTERRUPT_REG)))
+		master_inb(KEYCODE_REG);
+}
+
+static void q40kbd_stop(void)
+{
+	master_outb(0, KEY_IRQ_ENABLE_REG);
+	master_outb(-1, KEYBOARD_UNLOCK_REG);
+}
+
+/*
+ * q40kbd_open() is called when a port is open by the higher layer.
+ * It allocates the interrupt and enables in in the chip.
+ */
+
+static int q40kbd_open(struct serio *port)
+{
+	struct q40kbd *q40kbd = port->port_data;
+
+	q40kbd_flush(q40kbd);
+
+	/* off we go */
+	master_outb(-1, KEYBOARD_UNLOCK_REG);
+	master_outb(1, KEY_IRQ_ENABLE_REG);
+
+	return 0;
+}
+
+static void q40kbd_close(struct serio *port)
+{
+	struct q40kbd *q40kbd = port->port_data;
+
+	q40kbd_stop();
+	q40kbd_flush(q40kbd);
+}
+
+static int q40kbd_probe(struct platform_device *pdev)
+{
+	struct q40kbd *q40kbd;
+	struct serio *port;
+	int error;
+
+	q40kbd = kzalloc_obj(*q40kbd);
+	port = kzalloc_obj(*port);
+	if (!q40kbd || !port) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	q40kbd->port = port;
+	spin_lock_init(&q40kbd->lock);
+
+	port->id.type = SERIO_8042;
+	port->open = q40kbd_open;
+	port->close = q40kbd_close;
+	port->port_data = q40kbd;
+	port->dev.parent = &pdev->dev;
+	strscpy(port->name, "Q40 Kbd Port", sizeof(port->name));
+	strscpy(port->phys, "Q40", sizeof(port->phys));
+
+	q40kbd_stop();
+
+	error = request_irq(Q40_IRQ_KEYBOARD, q40kbd_interrupt, 0,
+			    DRV_NAME, q40kbd);
+	if (error) {
+		dev_err(&pdev->dev, "Can't get irq %d.\n", Q40_IRQ_KEYBOARD);
+		goto err_free_mem;
+	}
+
+	serio_register_port(q40kbd->port);
+
+	platform_set_drvdata(pdev, q40kbd);
+	printk(KERN_INFO "serio: Q40 kbd registered\n");
+
+	return 0;
+
+err_free_mem:
+	kfree(port);
+	kfree(q40kbd);
+	return error;
+}
+
+static void q40kbd_remove(struct platform_device *pdev)
+{
+	struct q40kbd *q40kbd = platform_get_drvdata(pdev);
+
+	/*
+	 * q40kbd_close() will be called as part of unregistering
+	 * and will ensure that IRQ is turned off, so it is safe
+	 * to unregister port first and free IRQ later.
+	 */
+	serio_unregister_port(q40kbd->port);
+	free_irq(Q40_IRQ_KEYBOARD, q40kbd);
+	kfree(q40kbd);
+}
+
+static struct platform_driver q40kbd_driver = {
+	.driver		= {
+		.name	= "q40kbd",
+	},
+	.remove		= q40kbd_remove,
+};
+
+module_platform_driver_probe(q40kbd_driver, q40kbd_probe);
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
new file mode 100644
index 000000000..4d817850b
--- /dev/null
+++ b/drivers/input/serio/rpckbd.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *  Copyright (c) 2002 Russell King
+ */
+
+/*
+ * Acorn RiscPC PS/2 keyboard controller driver for Linux/ARM
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/serio.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
+
+MODULE_AUTHOR("Vojtech Pavlik, Russell King");
+MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:kart");
+
+struct rpckbd_data {
+	int tx_irq;
+	int rx_irq;
+};
+
+static int rpckbd_write(struct serio *port, unsigned char val)
+{
+	while (!(iomd_readb(IOMD_KCTRL) & (1 << 7)))
+		cpu_relax();
+
+	iomd_writeb(val, IOMD_KARTTX);
+
+	return 0;
+}
+
+static irqreturn_t rpckbd_rx(int irq, void *dev_id)
+{
+	struct serio *port = dev_id;
+	unsigned int byte;
+	int handled = IRQ_NONE;
+
+	while (iomd_readb(IOMD_KCTRL) & (1 << 5)) {
+		byte = iomd_readb(IOMD_KARTRX);
+
+		serio_interrupt(port, byte, 0);
+		handled = IRQ_HANDLED;
+	}
+	return handled;
+}
+
+static irqreturn_t rpckbd_tx(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+static int rpckbd_open(struct serio *port)
+{
+	struct rpckbd_data *rpckbd = port->port_data;
+
+	/* Reset the keyboard state machine. */
+	iomd_writeb(0, IOMD_KCTRL);
+	iomd_writeb(8, IOMD_KCTRL);
+	iomd_readb(IOMD_KARTRX);
+
+	if (request_irq(rpckbd->rx_irq, rpckbd_rx, 0, "rpckbd", port) != 0) {
+		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ\n");
+		return -EBUSY;
+	}
+
+	if (request_irq(rpckbd->tx_irq, rpckbd_tx, 0, "rpckbd", port) != 0) {
+		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n");
+		free_irq(rpckbd->rx_irq, port);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static void rpckbd_close(struct serio *port)
+{
+	struct rpckbd_data *rpckbd = port->port_data;
+
+	free_irq(rpckbd->rx_irq, port);
+	free_irq(rpckbd->tx_irq, port);
+}
+
+/*
+ * Allocate and initialize serio structure for subsequent registration
+ * with serio core.
+ */
+static int rpckbd_probe(struct platform_device *dev)
+{
+	struct rpckbd_data *rpckbd;
+	struct serio *serio;
+	int tx_irq, rx_irq;
+
+	rx_irq = platform_get_irq(dev, 0);
+	if (rx_irq < 0)
+		return rx_irq;
+
+	tx_irq = platform_get_irq(dev, 1);
+	if (tx_irq < 0)
+		return tx_irq;
+
+	serio = kzalloc_obj(*serio);
+	rpckbd = kzalloc_obj(*rpckbd);
+	if (!serio || !rpckbd) {
+		kfree(rpckbd);
+		kfree(serio);
+		return -ENOMEM;
+	}
+
+	rpckbd->rx_irq = rx_irq;
+	rpckbd->tx_irq = tx_irq;
+
+	serio->id.type		= SERIO_8042;
+	serio->write		= rpckbd_write;
+	serio->open		= rpckbd_open;
+	serio->close		= rpckbd_close;
+	serio->dev.parent	= &dev->dev;
+	serio->port_data	= rpckbd;
+	strscpy(serio->name, "RiscPC PS/2 kbd port", sizeof(serio->name));
+	strscpy(serio->phys, "rpckbd/serio0", sizeof(serio->phys));
+
+	platform_set_drvdata(dev, serio);
+	serio_register_port(serio);
+	return 0;
+}
+
+static void rpckbd_remove(struct platform_device *dev)
+{
+	struct serio *serio = platform_get_drvdata(dev);
+	struct rpckbd_data *rpckbd = serio->port_data;
+
+	serio_unregister_port(serio);
+	kfree(rpckbd);
+}
+
+static struct platform_driver rpckbd_driver = {
+	.probe		= rpckbd_probe,
+	.remove		= rpckbd_remove,
+	.driver		= {
+		.name	= "kart",
+	},
+};
+module_platform_driver(rpckbd_driver);
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
new file mode 100644
index 000000000..e3a463c15
--- /dev/null
+++ b/drivers/input/serio/sa1111ps2.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/drivers/input/serio/sa1111ps2.c
+ *
+ *  Copyright (C) 2002 Russell King
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+
+#include <asm/hardware/sa1111.h>
+
+#define PS2CR		0x0000
+#define PS2STAT		0x0004
+#define PS2DATA		0x0008
+#define PS2CLKDIV	0x000c
+#define PS2PRECNT	0x0010
+
+#define PS2CR_ENA	0x08
+#define PS2CR_FKD	0x02
+#define PS2CR_FKC	0x01
+
+#define PS2STAT_STP	0x0100
+#define PS2STAT_TXE	0x0080
+#define PS2STAT_TXB	0x0040
+#define PS2STAT_RXF	0x0020
+#define PS2STAT_RXB	0x0010
+#define PS2STAT_ENA	0x0008
+#define PS2STAT_RXP	0x0004
+#define PS2STAT_KBD	0x0002
+#define PS2STAT_KBC	0x0001
+
+struct ps2if {
+	struct serio		*io;
+	struct sa1111_dev	*dev;
+	void __iomem		*base;
+	int			rx_irq;
+	int			tx_irq;
+	unsigned int		open;
+	spinlock_t		lock;
+	unsigned int		head;
+	unsigned int		tail;
+	unsigned char		buf[4];
+};
+
+/*
+ * Read all bytes waiting in the PS2 port.  There should be
+ * at the most one, but we loop for safety.  If there was a
+ * framing error, we have to manually clear the status.
+ */
+static irqreturn_t ps2_rxint(int irq, void *dev_id)
+{
+	struct ps2if *ps2if = dev_id;
+	unsigned int scancode, flag, status;
+
+	status = readl_relaxed(ps2if->base + PS2STAT);
+	while (status & PS2STAT_RXF) {
+		if (status & PS2STAT_STP)
+			writel_relaxed(PS2STAT_STP, ps2if->base + PS2STAT);
+
+		flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) |
+		       (status & PS2STAT_RXP ? 0 : SERIO_PARITY);
+
+		scancode = readl_relaxed(ps2if->base + PS2DATA) & 0xff;
+
+		if (hweight8(scancode) & 1)
+			flag ^= SERIO_PARITY;
+
+		serio_interrupt(ps2if->io, scancode, flag);
+
+		status = readl_relaxed(ps2if->base + PS2STAT);
+        }
+
+        return IRQ_HANDLED;
+}
+
+/*
+ * Completion of ps2 write
+ */
+static irqreturn_t ps2_txint(int irq, void *dev_id)
+{
+	struct ps2if *ps2if = dev_id;
+	unsigned int status;
+
+	guard(spinlock)(&ps2if->lock);
+
+	status = readl_relaxed(ps2if->base + PS2STAT);
+	if (ps2if->head == ps2if->tail) {
+		disable_irq_nosync(irq);
+		/* done */
+	} else if (status & PS2STAT_TXE) {
+		writel_relaxed(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA);
+		ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Write a byte to the PS2 port.  We have to wait for the
+ * port to indicate that the transmitter is empty.
+ */
+static int ps2_write(struct serio *io, unsigned char val)
+{
+	struct ps2if *ps2if = io->port_data;
+	unsigned int head;
+
+	guard(spinlock_irqsave)(&ps2if->lock);
+
+	/*
+	 * If the TX register is empty, we can go straight out.
+	 */
+	if (readl_relaxed(ps2if->base + PS2STAT) & PS2STAT_TXE) {
+		writel_relaxed(val, ps2if->base + PS2DATA);
+	} else {
+		if (ps2if->head == ps2if->tail)
+			enable_irq(ps2if->tx_irq);
+		head = (ps2if->head + 1) & (sizeof(ps2if->buf) - 1);
+		if (head != ps2if->tail) {
+			ps2if->buf[ps2if->head] = val;
+			ps2if->head = head;
+		}
+	}
+
+	return 0;
+}
+
+static int ps2_open(struct serio *io)
+{
+	struct ps2if *ps2if = io->port_data;
+	int ret;
+
+	ret = sa1111_enable_device(ps2if->dev);
+	if (ret)
+		return ret;
+
+	ret = request_irq(ps2if->rx_irq, ps2_rxint, 0,
+			  SA1111_DRIVER_NAME(ps2if->dev), ps2if);
+	if (ret) {
+		printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
+			ps2if->rx_irq, ret);
+		sa1111_disable_device(ps2if->dev);
+		return ret;
+	}
+
+	ret = request_irq(ps2if->tx_irq, ps2_txint, 0,
+			  SA1111_DRIVER_NAME(ps2if->dev), ps2if);
+	if (ret) {
+		printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
+			ps2if->tx_irq, ret);
+		free_irq(ps2if->rx_irq, ps2if);
+		sa1111_disable_device(ps2if->dev);
+		return ret;
+	}
+
+	ps2if->open = 1;
+
+	enable_irq_wake(ps2if->rx_irq);
+
+	writel_relaxed(PS2CR_ENA, ps2if->base + PS2CR);
+	return 0;
+}
+
+static void ps2_close(struct serio *io)
+{
+	struct ps2if *ps2if = io->port_data;
+
+	writel_relaxed(0, ps2if->base + PS2CR);
+
+	disable_irq_wake(ps2if->rx_irq);
+
+	ps2if->open = 0;
+
+	free_irq(ps2if->tx_irq, ps2if);
+	free_irq(ps2if->rx_irq, ps2if);
+
+	sa1111_disable_device(ps2if->dev);
+}
+
+/*
+ * Clear the input buffer.
+ */
+static void ps2_clear_input(struct ps2if *ps2if)
+{
+	int maxread = 100;
+
+	while (maxread--) {
+		if ((readl_relaxed(ps2if->base + PS2DATA) & 0xff) == 0xff)
+			break;
+	}
+}
+
+static unsigned int ps2_test_one(struct ps2if *ps2if,
+					   unsigned int mask)
+{
+	unsigned int val;
+
+	writel_relaxed(PS2CR_ENA | mask, ps2if->base + PS2CR);
+
+	udelay(10);
+
+	val = readl_relaxed(ps2if->base + PS2STAT);
+	return val & (PS2STAT_KBC | PS2STAT_KBD);
+}
+
+/*
+ * Test the keyboard interface.  We basically check to make sure that
+ * we can drive each line to the keyboard independently of each other.
+ */
+static int ps2_test(struct ps2if *ps2if)
+{
+	unsigned int stat;
+	int ret = 0;
+
+	stat = ps2_test_one(ps2if, PS2CR_FKC);
+	if (stat != PS2STAT_KBD) {
+		printk("PS/2 interface test failed[1]: %02x\n", stat);
+		ret = -ENODEV;
+	}
+
+	stat = ps2_test_one(ps2if, 0);
+	if (stat != (PS2STAT_KBC | PS2STAT_KBD)) {
+		printk("PS/2 interface test failed[2]: %02x\n", stat);
+		ret = -ENODEV;
+	}
+
+	stat = ps2_test_one(ps2if, PS2CR_FKD);
+	if (stat != PS2STAT_KBC) {
+		printk("PS/2 interface test failed[3]: %02x\n", stat);
+		ret = -ENODEV;
+	}
+
+	writel_relaxed(0, ps2if->base + PS2CR);
+
+	return ret;
+}
+
+/*
+ * Add one device to this driver.
+ */
+static int ps2_probe(struct sa1111_dev *dev)
+{
+	struct ps2if *ps2if;
+	struct serio *serio;
+	int ret;
+
+	ps2if = kzalloc_obj(*ps2if);
+	serio = kzalloc_obj(*serio);
+	if (!ps2if || !serio) {
+		ret = -ENOMEM;
+		goto free;
+	}
+
+	serio->id.type		= SERIO_8042;
+	serio->write		= ps2_write;
+	serio->open		= ps2_open;
+	serio->close		= ps2_close;
+	strscpy(serio->name, dev_name(&dev->dev), sizeof(serio->name));
+	strscpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
+	serio->port_data	= ps2if;
+	serio->dev.parent	= &dev->dev;
+	ps2if->io		= serio;
+	ps2if->dev		= dev;
+	sa1111_set_drvdata(dev, ps2if);
+
+	spin_lock_init(&ps2if->lock);
+
+	ps2if->rx_irq = sa1111_get_irq(dev, 0);
+	if (ps2if->rx_irq <= 0) {
+		ret = ps2if->rx_irq ? : -ENXIO;
+		goto free;
+	}
+
+	ps2if->tx_irq = sa1111_get_irq(dev, 1);
+	if (ps2if->tx_irq <= 0) {
+		ret = ps2if->tx_irq ? : -ENXIO;
+		goto free;
+	}
+
+	/*
+	 * Request the physical region for this PS2 port.
+	 */
+	if (!request_mem_region(dev->res.start,
+				dev->res.end - dev->res.start + 1,
+				SA1111_DRIVER_NAME(dev))) {
+		ret = -EBUSY;
+		goto free;
+	}
+
+	/*
+	 * Our parent device has already mapped the region.
+	 */
+	ps2if->base = dev->mapbase;
+
+	sa1111_enable_device(ps2if->dev);
+
+	/* Incoming clock is 8MHz */
+	writel_relaxed(0, ps2if->base + PS2CLKDIV);
+	writel_relaxed(127, ps2if->base + PS2PRECNT);
+
+	/*
+	 * Flush any pending input.
+	 */
+	ps2_clear_input(ps2if);
+
+	/*
+	 * Test the keyboard interface.
+	 */
+	ret = ps2_test(ps2if);
+	if (ret)
+		goto out;
+
+	/*
+	 * Flush any pending input.
+	 */
+	ps2_clear_input(ps2if);
+
+	sa1111_disable_device(ps2if->dev);
+	serio_register_port(ps2if->io);
+	return 0;
+
+ out:
+	sa1111_disable_device(ps2if->dev);
+	release_mem_region(dev->res.start, resource_size(&dev->res));
+ free:
+	sa1111_set_drvdata(dev, NULL);
+	kfree(ps2if);
+	kfree(serio);
+	return ret;
+}
+
+/*
+ * Remove one device from this driver.
+ */
+static void ps2_remove(struct sa1111_dev *dev)
+{
+	struct ps2if *ps2if = sa1111_get_drvdata(dev);
+
+	serio_unregister_port(ps2if->io);
+	release_mem_region(dev->res.start, resource_size(&dev->res));
+	sa1111_set_drvdata(dev, NULL);
+
+	kfree(ps2if);
+}
+
+/*
+ * Our device driver structure
+ */
+static struct sa1111_driver ps2_driver = {
+	.drv = {
+		.name	= "sa1111-ps2",
+		.owner	= THIS_MODULE,
+	},
+	.devid		= SA1111_DEVID_PS2,
+	.probe		= ps2_probe,
+	.remove		= ps2_remove,
+};
+
+static int __init ps2_init(void)
+{
+	return sa1111_driver_register(&ps2_driver);
+}
+
+static void __exit ps2_exit(void)
+{
+	sa1111_driver_unregister(&ps2_driver);
+}
+
+module_init(ps2_init);
+module_exit(ps2_exit);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("SA1111 PS2 controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
new file mode 100644
index 000000000..54dd26249
--- /dev/null
+++ b/drivers/input/serio/serio.c
@@ -0,0 +1,1017 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  The Serio abstraction module
+ *
+ *  Copyright (c) 1999-2004 Vojtech Pavlik
+ *  Copyright (c) 2004 Dmitry Torokhov
+ *  Copyright (c) 2003 Daniele Bellucci
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/export.h>
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Serio abstraction core");
+MODULE_LICENSE("GPL");
+
+/*
+ * serio_mutex protects entire serio subsystem and is taken every time
+ * serio port or driver registered or unregistered.
+ */
+static DEFINE_MUTEX(serio_mutex);
+
+static LIST_HEAD(serio_list);
+
+static void serio_add_port(struct serio *serio);
+static int serio_reconnect_port(struct serio *serio);
+static void serio_disconnect_port(struct serio *serio);
+static void serio_reconnect_subtree(struct serio *serio);
+static void serio_attach_driver(struct serio_driver *drv);
+
+static int serio_connect_driver(struct serio *serio, struct serio_driver *drv)
+{
+	guard(mutex)(&serio->drv_mutex);
+
+	return drv->connect(serio, drv);
+}
+
+static int serio_reconnect_driver(struct serio *serio)
+{
+	guard(mutex)(&serio->drv_mutex);
+
+	if (serio->drv && serio->drv->reconnect)
+		return serio->drv->reconnect(serio);
+
+	return -1;
+}
+
+static void serio_disconnect_driver(struct serio *serio)
+{
+	guard(mutex)(&serio->drv_mutex);
+
+	if (serio->drv)
+		serio->drv->disconnect(serio);
+}
+
+static int serio_match_port(const struct serio_device_id *ids, struct serio *serio)
+{
+	while (ids->type || ids->proto) {
+		if ((ids->type == SERIO_ANY || ids->type == serio->id.type) &&
+		    (ids->proto == SERIO_ANY || ids->proto == serio->id.proto) &&
+		    (ids->extra == SERIO_ANY || ids->extra == serio->id.extra) &&
+		    (ids->id == SERIO_ANY || ids->id == serio->id.id))
+			return 1;
+		ids++;
+	}
+	return 0;
+}
+
+/*
+ * Basic serio -> driver core mappings
+ */
+
+static int serio_bind_driver(struct serio *serio, struct serio_driver *drv)
+{
+	int error;
+
+	if (serio_match_port(drv->id_table, serio)) {
+
+		serio->dev.driver = &drv->driver;
+		if (serio_connect_driver(serio, drv)) {
+			serio->dev.driver = NULL;
+			return -ENODEV;
+		}
+
+		error = device_bind_driver(&serio->dev);
+		if (error) {
+			dev_warn(&serio->dev,
+				 "device_bind_driver() failed for %s (%s) and %s, error: %d\n",
+				 serio->phys, serio->name,
+				 drv->description, error);
+			serio_disconnect_driver(serio);
+			serio->dev.driver = NULL;
+			return error;
+		}
+	}
+	return 0;
+}
+
+static void serio_find_driver(struct serio *serio)
+{
+	int error;
+
+	error = device_attach(&serio->dev);
+	if (error < 0 && error != -EPROBE_DEFER)
+		dev_warn(&serio->dev,
+			 "device_attach() failed for %s (%s), error: %d\n",
+			 serio->phys, serio->name, error);
+}
+
+
+/*
+ * Serio event processing.
+ */
+
+enum serio_event_type {
+	SERIO_RESCAN_PORT,
+	SERIO_RECONNECT_PORT,
+	SERIO_RECONNECT_SUBTREE,
+	SERIO_REGISTER_PORT,
+	SERIO_ATTACH_DRIVER,
+};
+
+struct serio_event {
+	enum serio_event_type type;
+	void *object;
+	struct module *owner;
+	struct list_head node;
+};
+
+static DEFINE_SPINLOCK(serio_event_lock);	/* protects serio_event_list */
+static LIST_HEAD(serio_event_list);
+
+static struct serio_event *serio_get_event(void)
+{
+	struct serio_event *event = NULL;
+
+	guard(spinlock_irqsave)(&serio_event_lock);
+
+	if (!list_empty(&serio_event_list)) {
+		event = list_first_entry(&serio_event_list,
+					 struct serio_event, node);
+		list_del_init(&event->node);
+	}
+
+	return event;
+}
+
+static void serio_free_event(struct serio_event *event)
+{
+	module_put(event->owner);
+	kfree(event);
+}
+
+static void serio_remove_duplicate_events(void *object,
+					  enum serio_event_type type)
+{
+	struct serio_event *e, *next;
+
+	guard(spinlock_irqsave)(&serio_event_lock);
+
+	list_for_each_entry_safe(e, next, &serio_event_list, node) {
+		if (object == e->object) {
+			/*
+			 * If this event is of different type we should not
+			 * look further - we only suppress duplicate events
+			 * that were sent back-to-back.
+			 */
+			if (type != e->type)
+				break;
+
+			list_del_init(&e->node);
+			serio_free_event(e);
+		}
+	}
+}
+
+static void serio_handle_event(struct work_struct *work)
+{
+	struct serio_event *event;
+
+	guard(mutex)(&serio_mutex);
+
+	while ((event = serio_get_event())) {
+
+		switch (event->type) {
+
+		case SERIO_REGISTER_PORT:
+			serio_add_port(event->object);
+			break;
+
+		case SERIO_RECONNECT_PORT:
+			serio_reconnect_port(event->object);
+			break;
+
+		case SERIO_RESCAN_PORT:
+			serio_disconnect_port(event->object);
+			serio_find_driver(event->object);
+			break;
+
+		case SERIO_RECONNECT_SUBTREE:
+			serio_reconnect_subtree(event->object);
+			break;
+
+		case SERIO_ATTACH_DRIVER:
+			serio_attach_driver(event->object);
+			break;
+		}
+
+		serio_remove_duplicate_events(event->object, event->type);
+		serio_free_event(event);
+	}
+}
+
+static DECLARE_WORK(serio_event_work, serio_handle_event);
+
+static int serio_queue_event(void *object, struct module *owner,
+			     enum serio_event_type event_type)
+{
+	struct serio_event *event;
+
+	guard(spinlock_irqsave)(&serio_event_lock);
+
+	/*
+	 * Scan event list for the other events for the same serio port,
+	 * starting with the most recent one. If event is the same we
+	 * do not need add new one. If event is of different type we
+	 * need to add this event and should not look further because
+	 * we need to preseve sequence of distinct events.
+	 */
+	list_for_each_entry_reverse(event, &serio_event_list, node) {
+		if (event->object == object) {
+			if (event->type == event_type)
+				return 0;
+			break;
+		}
+	}
+
+	event = kmalloc_obj(*event, GFP_ATOMIC);
+	if (!event) {
+		pr_err("Not enough memory to queue event %d\n", event_type);
+		return -ENOMEM;
+	}
+
+	if (!try_module_get(owner)) {
+		pr_warn("Can't get module reference, dropping event %d\n",
+			event_type);
+		kfree(event);
+		return -EINVAL;
+	}
+
+	event->type = event_type;
+	event->object = object;
+	event->owner = owner;
+
+	list_add_tail(&event->node, &serio_event_list);
+	queue_work(system_long_wq, &serio_event_work);
+
+	return 0;
+}
+
+/*
+ * Remove all events that have been submitted for a given
+ * object, be it serio port or driver.
+ */
+static void serio_remove_pending_events(void *object)
+{
+	struct serio_event *event, *next;
+
+	guard(spinlock_irqsave)(&serio_event_lock);
+
+	list_for_each_entry_safe(event, next, &serio_event_list, node) {
+		if (event->object == object) {
+			list_del_init(&event->node);
+			serio_free_event(event);
+		}
+	}
+}
+
+/*
+ * Locate child serio port (if any) that has not been fully registered yet.
+ *
+ * Children are registered by driver's connect() handler so there can't be a
+ * grandchild pending registration together with a child.
+ */
+static struct serio *serio_get_pending_child(struct serio *parent)
+{
+	struct serio_event *event;
+	struct serio *serio;
+
+	guard(spinlock_irqsave)(&serio_event_lock);
+
+	list_for_each_entry(event, &serio_event_list, node) {
+		if (event->type == SERIO_REGISTER_PORT) {
+			serio = event->object;
+			if (serio->parent == parent)
+				return serio;
+		}
+	}
+
+	return NULL;
+}
+
+/*
+ * Serio port operations
+ */
+
+static ssize_t serio_show_description(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+	return sprintf(buf, "%s\n", serio->name);
+}
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+
+	return sprintf(buf, "serio:ty%02Xpr%02Xid%02Xex%02X\n",
+			serio->id.type, serio->id.proto, serio->id.id, serio->id.extra);
+}
+
+static ssize_t type_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+	return sprintf(buf, "%02x\n", serio->id.type);
+}
+
+static ssize_t proto_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+	return sprintf(buf, "%02x\n", serio->id.proto);
+}
+
+static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+	return sprintf(buf, "%02x\n", serio->id.id);
+}
+
+static ssize_t extra_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+	return sprintf(buf, "%02x\n", serio->id.extra);
+}
+
+static ssize_t drvctl_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct serio *serio = to_serio_port(dev);
+	struct device_driver *drv;
+	int error;
+
+	scoped_cond_guard(mutex_intr, return -EINTR, &serio_mutex) {
+		if (!strncmp(buf, "none", count)) {
+			serio_disconnect_port(serio);
+		} else if (!strncmp(buf, "reconnect", count)) {
+			serio_reconnect_subtree(serio);
+		} else if (!strncmp(buf, "rescan", count)) {
+			serio_disconnect_port(serio);
+			serio_find_driver(serio);
+			serio_remove_duplicate_events(serio, SERIO_RESCAN_PORT);
+		} else if ((drv = driver_find(buf, &serio_bus)) != NULL) {
+			serio_disconnect_port(serio);
+			error = serio_bind_driver(serio, to_serio_driver(drv));
+			serio_remove_duplicate_events(serio, SERIO_RESCAN_PORT);
+			if (error)
+				return error;
+		} else {
+			return -EINVAL;
+		}
+	}
+
+	return count;
+}
+
+static ssize_t serio_show_bind_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+	return sprintf(buf, "%s\n", serio->manual_bind ? "manual" : "auto");
+}
+
+static ssize_t serio_set_bind_mode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct serio *serio = to_serio_port(dev);
+	int retval;
+
+	retval = count;
+	if (!strncmp(buf, "manual", count)) {
+		serio->manual_bind = true;
+	} else if (!strncmp(buf, "auto", count)) {
+		serio->manual_bind = false;
+	} else {
+		retval = -EINVAL;
+	}
+
+	return retval;
+}
+
+static ssize_t firmware_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+
+	return sprintf(buf, "%s\n", serio->firmware_id);
+}
+
+static DEVICE_ATTR_RO(type);
+static DEVICE_ATTR_RO(proto);
+static DEVICE_ATTR_RO(id);
+static DEVICE_ATTR_RO(extra);
+
+static struct attribute *serio_device_id_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_proto.attr,
+	&dev_attr_id.attr,
+	&dev_attr_extra.attr,
+	NULL
+};
+
+static const struct attribute_group serio_id_attr_group = {
+	.name	= "id",
+	.attrs	= serio_device_id_attrs,
+};
+
+static DEVICE_ATTR_RO(modalias);
+static DEVICE_ATTR_WO(drvctl);
+static DEVICE_ATTR(description, S_IRUGO, serio_show_description, NULL);
+static DEVICE_ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode);
+static DEVICE_ATTR_RO(firmware_id);
+
+static struct attribute *serio_device_attrs[] = {
+	&dev_attr_modalias.attr,
+	&dev_attr_description.attr,
+	&dev_attr_drvctl.attr,
+	&dev_attr_bind_mode.attr,
+	&dev_attr_firmware_id.attr,
+	NULL
+};
+
+static const struct attribute_group serio_device_attr_group = {
+	.attrs	= serio_device_attrs,
+};
+
+static const struct attribute_group *serio_device_attr_groups[] = {
+	&serio_id_attr_group,
+	&serio_device_attr_group,
+	NULL
+};
+
+static void serio_release_port(struct device *dev)
+{
+	struct serio *serio = to_serio_port(dev);
+
+	kfree(serio);
+	module_put(THIS_MODULE);
+}
+
+/*
+ * Prepare serio port for registration.
+ */
+static void serio_init_port(struct serio *serio)
+{
+	static atomic_t serio_no = ATOMIC_INIT(-1);
+
+	__module_get(THIS_MODULE);
+
+	INIT_LIST_HEAD(&serio->node);
+	INIT_LIST_HEAD(&serio->child_node);
+	INIT_LIST_HEAD(&serio->children);
+	spin_lock_init(&serio->lock);
+	mutex_init(&serio->drv_mutex);
+	device_initialize(&serio->dev);
+	dev_set_name(&serio->dev, "serio%lu",
+		     (unsigned long)atomic_inc_return(&serio_no));
+	serio->dev.bus = &serio_bus;
+	serio->dev.release = serio_release_port;
+	serio->dev.groups = serio_device_attr_groups;
+	if (serio->parent) {
+		serio->dev.parent = &serio->parent->dev;
+		serio->depth = serio->parent->depth + 1;
+	} else
+		serio->depth = 0;
+	lockdep_set_subclass(&serio->lock, serio->depth);
+}
+
+/*
+ * Complete serio port registration.
+ * Driver core will attempt to find appropriate driver for the port.
+ */
+static void serio_add_port(struct serio *serio)
+{
+	struct serio *parent = serio->parent;
+	int error;
+
+	if (parent) {
+		guard(serio_pause_rx)(parent);
+
+		list_add_tail(&serio->child_node, &parent->children);
+	}
+
+	list_add_tail(&serio->node, &serio_list);
+
+	if (serio->start)
+		serio->start(serio);
+
+	error = device_add(&serio->dev);
+	if (error)
+		dev_err(&serio->dev,
+			"device_add() failed for %s (%s), error: %d\n",
+			serio->phys, serio->name, error);
+}
+
+/*
+ * serio_destroy_port() completes unregistration process and removes
+ * port from the system
+ */
+static void serio_destroy_port(struct serio *serio)
+{
+	struct serio *child;
+
+	while ((child = serio_get_pending_child(serio)) != NULL) {
+		serio_remove_pending_events(child);
+		put_device(&child->dev);
+	}
+
+	if (serio->stop)
+		serio->stop(serio);
+
+	if (serio->parent) {
+		guard(serio_pause_rx)(serio->parent);
+
+		list_del_init(&serio->child_node);
+		serio->parent = NULL;
+	}
+
+	if (device_is_registered(&serio->dev))
+		device_del(&serio->dev);
+
+	list_del_init(&serio->node);
+	serio_remove_pending_events(serio);
+	put_device(&serio->dev);
+}
+
+/*
+ * Reconnect serio port (re-initialize attached device).
+ * If reconnect fails (old device is no longer attached or
+ * there was no device to begin with) we do full rescan in
+ * hope of finding a driver for the port.
+ */
+static int serio_reconnect_port(struct serio *serio)
+{
+	int error = serio_reconnect_driver(serio);
+
+	if (error) {
+		serio_disconnect_port(serio);
+		serio_find_driver(serio);
+	}
+
+	return error;
+}
+
+/*
+ * Reconnect serio port and all its children (re-initialize attached
+ * devices).
+ */
+static void serio_reconnect_subtree(struct serio *root)
+{
+	struct serio *s = root;
+	int error;
+
+	do {
+		error = serio_reconnect_port(s);
+		if (!error) {
+			/*
+			 * Reconnect was successful, move on to do the
+			 * first child.
+			 */
+			if (!list_empty(&s->children)) {
+				s = list_first_entry(&s->children,
+						     struct serio, child_node);
+				continue;
+			}
+		}
+
+		/*
+		 * Either it was a leaf node or reconnect failed and it
+		 * became a leaf node. Continue reconnecting starting with
+		 * the next sibling of the parent node.
+		 */
+		while (s != root) {
+			struct serio *parent = s->parent;
+
+			if (!list_is_last(&s->child_node, &parent->children)) {
+				s = list_entry(s->child_node.next,
+					       struct serio, child_node);
+				break;
+			}
+
+			s = parent;
+		}
+	} while (s != root);
+}
+
+/*
+ * serio_disconnect_port() unbinds a port from its driver. As a side effect
+ * all children ports are unbound and destroyed.
+ */
+static void serio_disconnect_port(struct serio *serio)
+{
+	struct serio *s = serio;
+
+	/*
+	 * Children ports should be disconnected and destroyed
+	 * first; we travel the tree in depth-first order.
+	 */
+	while (!list_empty(&serio->children)) {
+
+		/* Locate a leaf */
+		while (!list_empty(&s->children))
+			s = list_first_entry(&s->children,
+					     struct serio, child_node);
+
+		/*
+		 * Prune this leaf node unless it is the one we
+		 * started with.
+		 */
+		if (s != serio) {
+			struct serio *parent = s->parent;
+
+			device_release_driver(&s->dev);
+			serio_destroy_port(s);
+
+			s = parent;
+		}
+	}
+
+	/*
+	 * OK, no children left, now disconnect this port.
+	 */
+	device_release_driver(&serio->dev);
+}
+
+void serio_rescan(struct serio *serio)
+{
+	serio_queue_event(serio, NULL, SERIO_RESCAN_PORT);
+}
+EXPORT_SYMBOL(serio_rescan);
+
+void serio_reconnect(struct serio *serio)
+{
+	serio_queue_event(serio, NULL, SERIO_RECONNECT_SUBTREE);
+}
+EXPORT_SYMBOL(serio_reconnect);
+
+/*
+ * Submits register request to kseriod for subsequent execution.
+ * Note that port registration is always asynchronous.
+ */
+void __serio_register_port(struct serio *serio, struct module *owner)
+{
+	serio_init_port(serio);
+	serio_queue_event(serio, owner, SERIO_REGISTER_PORT);
+}
+EXPORT_SYMBOL(__serio_register_port);
+
+/*
+ * Synchronously unregisters serio port.
+ */
+void serio_unregister_port(struct serio *serio)
+{
+	guard(mutex)(&serio_mutex);
+
+	serio_disconnect_port(serio);
+	serio_destroy_port(serio);
+}
+EXPORT_SYMBOL(serio_unregister_port);
+
+/*
+ * Safely unregisters children ports if they are present.
+ */
+void serio_unregister_child_port(struct serio *serio)
+{
+	struct serio *s, *next;
+
+	guard(mutex)(&serio_mutex);
+
+	list_for_each_entry_safe(s, next, &serio->children, child_node) {
+		serio_disconnect_port(s);
+		serio_destroy_port(s);
+	}
+}
+EXPORT_SYMBOL(serio_unregister_child_port);
+
+
+/*
+ * Serio driver operations
+ */
+
+static ssize_t description_show(struct device_driver *drv, char *buf)
+{
+	struct serio_driver *driver = to_serio_driver(drv);
+	return sprintf(buf, "%s\n", driver->description ? driver->description : "(none)");
+}
+static DRIVER_ATTR_RO(description);
+
+static ssize_t bind_mode_show(struct device_driver *drv, char *buf)
+{
+	struct serio_driver *serio_drv = to_serio_driver(drv);
+	return sprintf(buf, "%s\n", serio_drv->manual_bind ? "manual" : "auto");
+}
+
+static ssize_t bind_mode_store(struct device_driver *drv, const char *buf, size_t count)
+{
+	struct serio_driver *serio_drv = to_serio_driver(drv);
+	int retval;
+
+	retval = count;
+	if (!strncmp(buf, "manual", count)) {
+		serio_drv->manual_bind = true;
+	} else if (!strncmp(buf, "auto", count)) {
+		serio_drv->manual_bind = false;
+	} else {
+		retval = -EINVAL;
+	}
+
+	return retval;
+}
+static DRIVER_ATTR_RW(bind_mode);
+
+static struct attribute *serio_driver_attrs[] = {
+	&driver_attr_description.attr,
+	&driver_attr_bind_mode.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(serio_driver);
+
+static int serio_driver_probe(struct device *dev)
+{
+	struct serio *serio = to_serio_port(dev);
+	struct serio_driver *drv = to_serio_driver(dev->driver);
+
+	return serio_connect_driver(serio, drv);
+}
+
+static void serio_driver_remove(struct device *dev)
+{
+	struct serio *serio = to_serio_port(dev);
+
+	serio_disconnect_driver(serio);
+}
+
+static void serio_cleanup(struct serio *serio)
+{
+	guard(mutex)(&serio->drv_mutex);
+
+	if (serio->drv && serio->drv->cleanup)
+		serio->drv->cleanup(serio);
+}
+
+static void serio_shutdown(struct device *dev)
+{
+	struct serio *serio = to_serio_port(dev);
+
+	serio_cleanup(serio);
+}
+
+static void serio_attach_driver(struct serio_driver *drv)
+{
+	int error;
+
+	error = driver_attach(&drv->driver);
+	if (error)
+		pr_warn("driver_attach() failed for %s with error %d\n",
+			drv->driver.name, error);
+}
+
+int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name)
+{
+	bool manual_bind = drv->manual_bind;
+	int error;
+
+	drv->driver.bus = &serio_bus;
+	drv->driver.owner = owner;
+	drv->driver.mod_name = mod_name;
+
+	/*
+	 * Temporarily disable automatic binding because probing
+	 * takes long time and we are better off doing it in kseriod
+	 */
+	drv->manual_bind = true;
+
+	error = driver_register(&drv->driver);
+	if (error) {
+		pr_err("driver_register() failed for %s, error: %d\n",
+			drv->driver.name, error);
+		return error;
+	}
+
+	/*
+	 * Restore original bind mode and let kseriod bind the
+	 * driver to free ports
+	 */
+	if (!manual_bind) {
+		drv->manual_bind = false;
+		error = serio_queue_event(drv, NULL, SERIO_ATTACH_DRIVER);
+		if (error) {
+			driver_unregister(&drv->driver);
+			return error;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(__serio_register_driver);
+
+void serio_unregister_driver(struct serio_driver *drv)
+{
+	struct serio *serio;
+
+	guard(mutex)(&serio_mutex);
+
+	drv->manual_bind = true;	/* so serio_find_driver ignores it */
+	serio_remove_pending_events(drv);
+
+start_over:
+	list_for_each_entry(serio, &serio_list, node) {
+		if (serio->drv == drv) {
+			serio_disconnect_port(serio);
+			serio_find_driver(serio);
+			/* we could've deleted some ports, restart */
+			goto start_over;
+		}
+	}
+
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(serio_unregister_driver);
+
+static void serio_set_drv(struct serio *serio, struct serio_driver *drv)
+{
+	guard(serio_pause_rx)(serio);
+
+	serio->drv = drv;
+}
+
+static int serio_bus_match(struct device *dev, const struct device_driver *drv)
+{
+	struct serio *serio = to_serio_port(dev);
+	const struct serio_driver *serio_drv = to_serio_driver(drv);
+
+	if (serio->manual_bind || serio_drv->manual_bind)
+		return 0;
+
+	return serio_match_port(serio_drv->id_table, serio);
+}
+
+#define SERIO_ADD_UEVENT_VAR(fmt, val...)				\
+	do {								\
+		int err = add_uevent_var(env, fmt, val);		\
+		if (err)						\
+			return err;					\
+	} while (0)
+
+static int serio_uevent(const struct device *dev, struct kobj_uevent_env *env)
+{
+	const struct serio *serio;
+
+	if (!dev)
+		return -ENODEV;
+
+	serio = to_serio_port(dev);
+
+	SERIO_ADD_UEVENT_VAR("SERIO_TYPE=%02x", serio->id.type);
+	SERIO_ADD_UEVENT_VAR("SERIO_PROTO=%02x", serio->id.proto);
+	SERIO_ADD_UEVENT_VAR("SERIO_ID=%02x", serio->id.id);
+	SERIO_ADD_UEVENT_VAR("SERIO_EXTRA=%02x", serio->id.extra);
+
+	SERIO_ADD_UEVENT_VAR("MODALIAS=serio:ty%02Xpr%02Xid%02Xex%02X",
+				serio->id.type, serio->id.proto, serio->id.id, serio->id.extra);
+
+	if (serio->firmware_id[0])
+		SERIO_ADD_UEVENT_VAR("SERIO_FIRMWARE_ID=%s",
+				     serio->firmware_id);
+
+	return 0;
+}
+#undef SERIO_ADD_UEVENT_VAR
+
+#ifdef CONFIG_PM
+static int serio_suspend(struct device *dev)
+{
+	struct serio *serio = to_serio_port(dev);
+
+	serio_cleanup(serio);
+
+	return 0;
+}
+
+static int serio_resume(struct device *dev)
+{
+	struct serio *serio = to_serio_port(dev);
+	int error = -ENOENT;
+
+	scoped_guard(mutex, &serio->drv_mutex) {
+		if (serio->drv && serio->drv->fast_reconnect) {
+			error = serio->drv->fast_reconnect(serio);
+			if (error && error != -ENOENT)
+				dev_warn(dev, "fast reconnect failed with error %d\n",
+					 error);
+		}
+	}
+
+	if (error) {
+		/*
+		 * Driver reconnect can take a while, so better let
+		 * kseriod deal with it.
+		 */
+		serio_queue_event(serio, NULL, SERIO_RECONNECT_PORT);
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops serio_pm_ops = {
+	.suspend	= serio_suspend,
+	.resume		= serio_resume,
+	.poweroff	= serio_suspend,
+	.restore	= serio_resume,
+};
+#endif /* CONFIG_PM */
+
+/* called from serio_driver->connect/disconnect methods under serio_mutex */
+int serio_open(struct serio *serio, struct serio_driver *drv)
+{
+	serio_set_drv(serio, drv);
+
+	if (serio->open && serio->open(serio)) {
+		serio_set_drv(serio, NULL);
+		return -1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(serio_open);
+
+/* called from serio_driver->connect/disconnect methods under serio_mutex */
+void serio_close(struct serio *serio)
+{
+	if (serio->close)
+		serio->close(serio);
+
+	serio_set_drv(serio, NULL);
+}
+EXPORT_SYMBOL(serio_close);
+
+irqreturn_t serio_interrupt(struct serio *serio,
+		unsigned char data, unsigned int dfl)
+{
+	guard(spinlock_irqsave)(&serio->lock);
+
+	if (likely(serio->drv))
+		return serio->drv->interrupt(serio, data, dfl);
+
+	if (!dfl && device_is_registered(&serio->dev)) {
+		serio_rescan(serio);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+EXPORT_SYMBOL(serio_interrupt);
+
+const struct bus_type serio_bus = {
+	.name		= "serio",
+	.drv_groups	= serio_driver_groups,
+	.match		= serio_bus_match,
+	.uevent		= serio_uevent,
+	.probe		= serio_driver_probe,
+	.remove		= serio_driver_remove,
+	.shutdown	= serio_shutdown,
+#ifdef CONFIG_PM
+	.pm		= &serio_pm_ops,
+#endif
+};
+EXPORT_SYMBOL(serio_bus);
+
+static int __init serio_init(void)
+{
+	int error;
+
+	error = bus_register(&serio_bus);
+	if (error) {
+		pr_err("Failed to register serio bus, error: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static void __exit serio_exit(void)
+{
+	bus_unregister(&serio_bus);
+
+	/*
+	 * There should not be any outstanding events but work may
+	 * still be scheduled so simply cancel it.
+	 */
+	cancel_work_sync(&serio_event_work);
+}
+
+subsys_initcall(serio_init);
+module_exit(serio_exit);
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
new file mode 100644
index 000000000..a7ccedfa4
--- /dev/null
+++ b/drivers/input/serio/serio_raw.c
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Raw serio device providing access to a raw byte stream from underlying
+ * serio port. Closely emulates behavior of pre-2.6 /dev/psaux device
+ *
+ * Copyright (c) 2004 Dmitry Torokhov
+ */
+
+#include <linux/kref.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/major.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+
+#define DRIVER_DESC	"Raw serio driver"
+
+MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define SERIO_RAW_QUEUE_LEN	64
+struct serio_raw {
+	unsigned char queue[SERIO_RAW_QUEUE_LEN];
+	unsigned int tail, head;
+
+	char name[20];
+	struct kref kref;
+	struct serio *serio;
+	struct miscdevice dev;
+	wait_queue_head_t wait;
+	struct list_head client_list;
+	struct list_head node;
+	bool dead;
+};
+
+struct serio_raw_client {
+	struct fasync_struct *fasync;
+	struct serio_raw *serio_raw;
+	struct list_head node;
+};
+
+static DEFINE_MUTEX(serio_raw_mutex);
+static LIST_HEAD(serio_raw_list);
+
+/*********************************************************************
+ *             Interface with userspace (file operations)            *
+ *********************************************************************/
+
+static int serio_raw_fasync(int fd, struct file *file, int on)
+{
+	struct serio_raw_client *client = file->private_data;
+
+	return fasync_helper(fd, file, on, &client->fasync);
+}
+
+static struct serio_raw *serio_raw_locate(int minor)
+{
+	struct serio_raw *serio_raw;
+
+	list_for_each_entry(serio_raw, &serio_raw_list, node) {
+		if (serio_raw->dev.minor == minor)
+			return serio_raw;
+	}
+
+	return NULL;
+}
+
+static int serio_raw_open(struct inode *inode, struct file *file)
+{
+	struct serio_raw *serio_raw;
+	struct serio_raw_client *client;
+
+	scoped_guard(mutex_intr, &serio_raw_mutex) {
+		serio_raw = serio_raw_locate(iminor(inode));
+		if (!serio_raw)
+			return -ENODEV;
+
+		if (serio_raw->dead)
+			return -ENODEV;
+
+		client = kzalloc(sizeof(*client), GFP_KERNEL);
+		if (!client)
+			return -ENOMEM;
+
+		client->serio_raw = serio_raw;
+		file->private_data = client;
+
+		kref_get(&serio_raw->kref);
+
+		scoped_guard(serio_pause_rx, serio_raw->serio)
+			list_add_tail(&client->node, &serio_raw->client_list);
+
+		return 0;
+	}
+
+	return -EINTR;
+}
+
+static void serio_raw_free(struct kref *kref)
+{
+	struct serio_raw *serio_raw =
+			container_of(kref, struct serio_raw, kref);
+
+	put_device(&serio_raw->serio->dev);
+	kfree(serio_raw);
+}
+
+static int serio_raw_release(struct inode *inode, struct file *file)
+{
+	struct serio_raw_client *client = file->private_data;
+	struct serio_raw *serio_raw = client->serio_raw;
+
+	scoped_guard(serio_pause_rx, serio_raw->serio)
+		list_del(&client->node);
+
+	kfree(client);
+
+	kref_put(&serio_raw->kref, serio_raw_free);
+
+	return 0;
+}
+
+static bool serio_raw_fetch_byte(struct serio_raw *serio_raw, char *c)
+{
+	guard(serio_pause_rx)(serio_raw->serio);
+
+	if (serio_raw->head == serio_raw->tail)
+		return false; /* queue is empty */
+
+	*c = serio_raw->queue[serio_raw->tail];
+	serio_raw->tail = (serio_raw->tail + 1) % SERIO_RAW_QUEUE_LEN;
+
+	return true;
+}
+
+static ssize_t serio_raw_read(struct file *file, char __user *buffer,
+			      size_t count, loff_t *ppos)
+{
+	struct serio_raw_client *client = file->private_data;
+	struct serio_raw *serio_raw = client->serio_raw;
+	char c;
+	ssize_t read = 0;
+	int error;
+
+	for (;;) {
+		if (serio_raw->dead)
+			return -ENODEV;
+
+		if (serio_raw->head == serio_raw->tail &&
+		    (file->f_flags & O_NONBLOCK))
+			return -EAGAIN;
+
+		if (count == 0)
+			break;
+
+		while (read < count && serio_raw_fetch_byte(serio_raw, &c)) {
+			if (put_user(c, buffer++))
+				return -EFAULT;
+			read++;
+		}
+
+		if (read)
+			break;
+
+		if (!(file->f_flags & O_NONBLOCK)) {
+			error = wait_event_interruptible(serio_raw->wait,
+					serio_raw->head != serio_raw->tail ||
+					serio_raw->dead);
+			if (error)
+				return error;
+		}
+	}
+
+	return read;
+}
+
+static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
+			       size_t count, loff_t *ppos)
+{
+	struct serio_raw_client *client = file->private_data;
+	struct serio_raw *serio_raw = client->serio_raw;
+	int written = 0;
+	unsigned char c;
+
+	scoped_guard(mutex_intr, &serio_raw_mutex) {
+		if (serio_raw->dead)
+			return -ENODEV;
+
+		if (count > 32)
+			count = 32;
+
+		while (count--) {
+			if (get_user(c, buffer++))
+				return -EFAULT;
+
+			if (serio_write(serio_raw->serio, c)) {
+				/* Either signal error or partial write */
+				return written ?: -EIO;
+			}
+
+			written++;
+		}
+
+		return written;
+	}
+
+	return -EINTR;
+}
+
+static __poll_t serio_raw_poll(struct file *file, poll_table *wait)
+{
+	struct serio_raw_client *client = file->private_data;
+	struct serio_raw *serio_raw = client->serio_raw;
+	__poll_t mask;
+
+	poll_wait(file, &serio_raw->wait, wait);
+
+	mask = serio_raw->dead ? EPOLLHUP | EPOLLERR : EPOLLOUT | EPOLLWRNORM;
+	if (serio_raw->head != serio_raw->tail)
+		mask |= EPOLLIN | EPOLLRDNORM;
+
+	return mask;
+}
+
+static const struct file_operations serio_raw_fops = {
+	.owner		= THIS_MODULE,
+	.open		= serio_raw_open,
+	.release	= serio_raw_release,
+	.read		= serio_raw_read,
+	.write		= serio_raw_write,
+	.poll		= serio_raw_poll,
+	.fasync		= serio_raw_fasync,
+	.llseek		= noop_llseek,
+};
+
+
+/*********************************************************************
+ *                   Interface with serio port                       *
+ *********************************************************************/
+
+static irqreturn_t serio_raw_interrupt(struct serio *serio, unsigned char data,
+					unsigned int dfl)
+{
+	struct serio_raw *serio_raw = serio_get_drvdata(serio);
+	struct serio_raw_client *client;
+	unsigned int head = serio_raw->head;
+
+	/* we are holding serio->lock here so we are protected */
+	serio_raw->queue[head] = data;
+	head = (head + 1) % SERIO_RAW_QUEUE_LEN;
+	if (likely(head != serio_raw->tail)) {
+		serio_raw->head = head;
+		list_for_each_entry(client, &serio_raw->client_list, node)
+			kill_fasync(&client->fasync, SIGIO, POLL_IN);
+		wake_up_interruptible(&serio_raw->wait);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
+{
+	static atomic_t serio_raw_no = ATOMIC_INIT(-1);
+	struct serio_raw *serio_raw;
+	int err;
+
+	serio_raw = kzalloc_obj(*serio_raw);
+	if (!serio_raw) {
+		dev_dbg(&serio->dev, "can't allocate memory for a device\n");
+		return -ENOMEM;
+	}
+
+	snprintf(serio_raw->name, sizeof(serio_raw->name),
+		 "serio_raw%u", atomic_inc_return(&serio_raw_no));
+	kref_init(&serio_raw->kref);
+	INIT_LIST_HEAD(&serio_raw->client_list);
+	init_waitqueue_head(&serio_raw->wait);
+
+	serio_raw->serio = serio;
+	get_device(&serio->dev);
+
+	serio_set_drvdata(serio, serio_raw);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto err_free;
+
+	err = mutex_lock_killable(&serio_raw_mutex);
+	if (err)
+		goto err_close;
+
+	list_add_tail(&serio_raw->node, &serio_raw_list);
+	mutex_unlock(&serio_raw_mutex);
+
+	serio_raw->dev.minor = PSMOUSE_MINOR;
+	serio_raw->dev.name = serio_raw->name;
+	serio_raw->dev.parent = &serio->dev;
+	serio_raw->dev.fops = &serio_raw_fops;
+
+	err = misc_register(&serio_raw->dev);
+	if (err) {
+		serio_raw->dev.minor = MISC_DYNAMIC_MINOR;
+		err = misc_register(&serio_raw->dev);
+	}
+
+	if (err) {
+		dev_err(&serio->dev,
+			"failed to register raw access device for %s\n",
+			serio->phys);
+		goto err_unlink;
+	}
+
+	dev_info(&serio->dev, "raw access enabled on %s (%s, minor %d)\n",
+		 serio->phys, serio_raw->name, serio_raw->dev.minor);
+	return 0;
+
+err_unlink:
+	list_del_init(&serio_raw->node);
+err_close:
+	serio_close(serio);
+err_free:
+	serio_set_drvdata(serio, NULL);
+	kref_put(&serio_raw->kref, serio_raw_free);
+	return err;
+}
+
+static int serio_raw_reconnect(struct serio *serio)
+{
+	struct serio_raw *serio_raw = serio_get_drvdata(serio);
+	struct serio_driver *drv = serio->drv;
+
+	if (!drv || !serio_raw) {
+		dev_dbg(&serio->dev,
+			"reconnect request, but serio is disconnected, ignoring...\n");
+		return -1;
+	}
+
+	/*
+	 * Nothing needs to be done here, we just need this method to
+	 * keep the same device.
+	 */
+	return 0;
+}
+
+/*
+ * Wake up users waiting for IO so they can disconnect from
+ * dead device.
+ */
+static void serio_raw_hangup(struct serio_raw *serio_raw)
+{
+	struct serio_raw_client *client;
+
+	scoped_guard(serio_pause_rx, serio_raw->serio) {
+		list_for_each_entry(client, &serio_raw->client_list, node)
+			kill_fasync(&client->fasync, SIGIO, POLL_HUP);
+	}
+
+	wake_up_interruptible(&serio_raw->wait);
+}
+
+
+static void serio_raw_disconnect(struct serio *serio)
+{
+	struct serio_raw *serio_raw = serio_get_drvdata(serio);
+
+	misc_deregister(&serio_raw->dev);
+
+	scoped_guard(mutex, &serio_raw_mutex) {
+		serio_raw->dead = true;
+		list_del_init(&serio_raw->node);
+	}
+
+	serio_raw_hangup(serio_raw);
+
+	serio_close(serio);
+	kref_put(&serio_raw->kref, serio_raw_free);
+
+	serio_set_drvdata(serio, NULL);
+}
+
+static const struct serio_device_id serio_raw_serio_ids[] = {
+	{
+		.type	= SERIO_8042,
+		.proto	= SERIO_ANY,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_8042_XL,
+		.proto	= SERIO_ANY,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, serio_raw_serio_ids);
+
+static struct serio_driver serio_raw_drv = {
+	.driver		= {
+		.name	= "serio_raw",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= serio_raw_serio_ids,
+	.interrupt	= serio_raw_interrupt,
+	.connect	= serio_raw_connect,
+	.reconnect	= serio_raw_reconnect,
+	.disconnect	= serio_raw_disconnect,
+	.manual_bind	= true,
+};
+
+module_serio_driver(serio_raw_drv);
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
new file mode 100644
index 000000000..cabe3876c
--- /dev/null
+++ b/drivers/input/serio/serport.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Input device TTY line discipline
+ *
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This is a module that converts a tty line into a much simpler
+ * 'serial io port' abstraction that the input device drivers use.
+ */
+
+
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/tty.h>
+#include <linux/compat.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Input device TTY line discipline");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_LDISC(N_MOUSE);
+
+#define SERPORT_BUSY	1
+#define SERPORT_ACTIVE	2
+#define SERPORT_DEAD	3
+
+struct serport {
+	struct tty_struct *tty;
+	wait_queue_head_t wait;
+	struct serio *serio;
+	struct serio_device_id id;
+	spinlock_t lock;
+	unsigned long flags;
+};
+
+/*
+ * Callback functions from the serio code.
+ */
+
+static int serport_serio_write(struct serio *serio, unsigned char data)
+{
+	struct serport *serport = serio->port_data;
+	return -(serport->tty->ops->write(serport->tty, &data, 1) != 1);
+}
+
+static int serport_serio_open(struct serio *serio)
+{
+	struct serport *serport = serio->port_data;
+
+	guard(spinlock_irqsave)(&serport->lock);
+	set_bit(SERPORT_ACTIVE, &serport->flags);
+
+	return 0;
+}
+
+
+static void serport_serio_close(struct serio *serio)
+{
+	struct serport *serport = serio->port_data;
+
+	guard(spinlock_irqsave)(&serport->lock);
+	clear_bit(SERPORT_ACTIVE, &serport->flags);
+}
+
+/*
+ * serport_ldisc_open() is the routine that is called upon setting our line
+ * discipline on a tty. It prepares the serio struct.
+ */
+
+static int serport_ldisc_open(struct tty_struct *tty)
+{
+	struct serport *serport;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	serport = kzalloc_obj(*serport);
+	if (!serport)
+		return -ENOMEM;
+
+	serport->tty = tty;
+	spin_lock_init(&serport->lock);
+	init_waitqueue_head(&serport->wait);
+
+	tty->disc_data = serport;
+	tty->receive_room = 256;
+	set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+
+	return 0;
+}
+
+/*
+ * serport_ldisc_close() is the opposite of serport_ldisc_open()
+ */
+
+static void serport_ldisc_close(struct tty_struct *tty)
+{
+	struct serport *serport = tty->disc_data;
+
+	kfree(serport);
+}
+
+/*
+ * serport_ldisc_receive() is called by the low level tty driver when characters
+ * are ready for us. We forward the characters and flags, one by one to the
+ * 'interrupt' routine.
+ */
+
+static void serport_ldisc_receive(struct tty_struct *tty, const u8 *cp,
+				  const u8 *fp, size_t count)
+{
+	struct serport *serport = tty->disc_data;
+	unsigned int ch_flags = 0;
+	int i;
+
+	guard(spinlock_irqsave)(&serport->lock);
+
+	if (!test_bit(SERPORT_ACTIVE, &serport->flags))
+		return;
+
+	for (i = 0; i < count; i++) {
+		if (fp) {
+			switch (fp[i]) {
+			case TTY_FRAME:
+				ch_flags = SERIO_FRAME;
+				break;
+
+			case TTY_PARITY:
+				ch_flags = SERIO_PARITY;
+				break;
+
+			default:
+				ch_flags = 0;
+				break;
+			}
+		}
+
+		serio_interrupt(serport->serio, cp[i], ch_flags);
+	}
+}
+
+/*
+ * serport_ldisc_read() just waits indefinitely if everything goes well.
+ * However, when the serio driver closes the serio port, it finishes,
+ * returning 0 characters.
+ */
+
+static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file,
+				  u8 *kbuf, size_t nr, void **cookie,
+				  unsigned long offset)
+{
+	struct serport *serport = tty->disc_data;
+	struct serio *serio;
+
+	if (test_and_set_bit(SERPORT_BUSY, &serport->flags))
+		return -EBUSY;
+
+	serport->serio = serio = kzalloc_obj(*serio);
+	if (!serio)
+		return -ENOMEM;
+
+	strscpy(serio->name, "Serial port", sizeof(serio->name));
+	snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty));
+	serio->id = serport->id;
+	serio->id.type = SERIO_RS232;
+	serio->write = serport_serio_write;
+	serio->open = serport_serio_open;
+	serio->close = serport_serio_close;
+	serio->port_data = serport;
+	serio->dev.parent = tty->dev;
+
+	serio_register_port(serport->serio);
+	printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty));
+
+	wait_event_interruptible(serport->wait, test_bit(SERPORT_DEAD, &serport->flags));
+	serio_unregister_port(serport->serio);
+	serport->serio = NULL;
+
+	clear_bit(SERPORT_DEAD, &serport->flags);
+	clear_bit(SERPORT_BUSY, &serport->flags);
+
+	return 0;
+}
+
+static void serport_set_type(struct tty_struct *tty, unsigned long type)
+{
+	struct serport *serport = tty->disc_data;
+
+	serport->id.proto = type & 0x000000ff;
+	serport->id.id    = (type & 0x0000ff00) >> 8;
+	serport->id.extra = (type & 0x00ff0000) >> 16;
+}
+
+/*
+ * serport_ldisc_ioctl() allows to set the port protocol, and device ID
+ */
+
+static int serport_ldisc_ioctl(struct tty_struct *tty, unsigned int cmd,
+			       unsigned long arg)
+{
+	if (cmd == SPIOCSTYPE) {
+		unsigned long type;
+
+		if (get_user(type, (unsigned long __user *) arg))
+			return -EFAULT;
+
+		serport_set_type(tty, type);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_SPIOCSTYPE	_IOW('q', 0x01, compat_ulong_t)
+static int serport_ldisc_compat_ioctl(struct tty_struct *tty,
+				       unsigned int cmd, unsigned long arg)
+{
+	if (cmd == COMPAT_SPIOCSTYPE) {
+		void __user *uarg = compat_ptr(arg);
+		compat_ulong_t compat_type;
+
+		if (get_user(compat_type, (compat_ulong_t __user *)uarg))
+			return -EFAULT;
+
+		serport_set_type(tty, compat_type);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+#endif
+
+static void serport_ldisc_hangup(struct tty_struct *tty)
+{
+	struct serport *serport = tty->disc_data;
+
+	scoped_guard(spinlock_irqsave, &serport->lock)
+		set_bit(SERPORT_DEAD, &serport->flags);
+
+	wake_up_interruptible(&serport->wait);
+}
+
+static void serport_ldisc_write_wakeup(struct tty_struct * tty)
+{
+	struct serport *serport = tty->disc_data;
+
+	guard(spinlock_irqsave)(&serport->lock);
+
+	if (test_bit(SERPORT_ACTIVE, &serport->flags))
+		serio_drv_write_wakeup(serport->serio);
+}
+
+/*
+ * The line discipline structure.
+ */
+
+static struct tty_ldisc_ops serport_ldisc = {
+	.owner =	THIS_MODULE,
+	.num =		N_MOUSE,
+	.name =		"input",
+	.open =		serport_ldisc_open,
+	.close =	serport_ldisc_close,
+	.read =		serport_ldisc_read,
+	.ioctl =	serport_ldisc_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl =	serport_ldisc_compat_ioctl,
+#endif
+	.receive_buf =	serport_ldisc_receive,
+	.hangup =	serport_ldisc_hangup,
+	.write_wakeup =	serport_ldisc_write_wakeup
+};
+
+/*
+ * The functions for insering/removing us as a module.
+ */
+
+static int __init serport_init(void)
+{
+	int retval;
+	retval = tty_register_ldisc(&serport_ldisc);
+	if (retval)
+		printk(KERN_ERR "serport.c: Error registering line discipline.\n");
+
+	return  retval;
+}
+
+static void __exit serport_exit(void)
+{
+	tty_unregister_ldisc(&serport_ldisc);
+}
+
+module_init(serport_init);
+module_exit(serport_exit);
diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
new file mode 100644
index 000000000..6a9adcca4
--- /dev/null
+++ b/drivers/input/serio/sun4i-ps2.c
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *	Driver for Allwinner A10 PS2 host controller
+ *
+ *	Author: Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *		Aaron.maoye <leafy.myeh@newbietech.com>
+ */
+
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_NAME		"sun4i-ps2"
+
+/* register offset definitions */
+#define PS2_REG_GCTL		0x00	/* PS2 Module Global Control Reg */
+#define PS2_REG_DATA		0x04	/* PS2 Module Data Reg		*/
+#define PS2_REG_LCTL		0x08	/* PS2 Module Line Control Reg */
+#define PS2_REG_LSTS		0x0C	/* PS2 Module Line Status Reg	*/
+#define PS2_REG_FCTL		0x10	/* PS2 Module FIFO Control Reg */
+#define PS2_REG_FSTS		0x14	/* PS2 Module FIFO Status Reg	*/
+#define PS2_REG_CLKDR		0x18	/* PS2 Module Clock Divider Reg*/
+
+/*  PS2 GLOBAL CONTROL REGISTER PS2_GCTL */
+#define PS2_GCTL_INTFLAG	BIT(4)
+#define PS2_GCTL_INTEN		BIT(3)
+#define PS2_GCTL_RESET		BIT(2)
+#define PS2_GCTL_MASTER		BIT(1)
+#define PS2_GCTL_BUSEN		BIT(0)
+
+/* PS2 LINE CONTROL REGISTER */
+#define PS2_LCTL_NOACK		BIT(18)
+#define PS2_LCTL_TXDTOEN	BIT(8)
+#define PS2_LCTL_STOPERREN	BIT(3)
+#define PS2_LCTL_ACKERREN	BIT(2)
+#define PS2_LCTL_PARERREN	BIT(1)
+#define PS2_LCTL_RXDTOEN	BIT(0)
+
+/* PS2 LINE STATUS REGISTER */
+#define PS2_LSTS_TXTDO		BIT(8)
+#define PS2_LSTS_STOPERR	BIT(3)
+#define PS2_LSTS_ACKERR		BIT(2)
+#define PS2_LSTS_PARERR		BIT(1)
+#define PS2_LSTS_RXTDO		BIT(0)
+
+#define PS2_LINE_ERROR_BIT \
+	(PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR | \
+	PS2_LSTS_PARERR | PS2_LSTS_RXTDO)
+
+/* PS2 FIFO CONTROL REGISTER */
+#define PS2_FCTL_TXRST		BIT(17)
+#define PS2_FCTL_RXRST		BIT(16)
+#define PS2_FCTL_TXUFIEN	BIT(10)
+#define PS2_FCTL_TXOFIEN	BIT(9)
+#define PS2_FCTL_TXRDYIEN	BIT(8)
+#define PS2_FCTL_RXUFIEN	BIT(2)
+#define PS2_FCTL_RXOFIEN	BIT(1)
+#define PS2_FCTL_RXRDYIEN	BIT(0)
+
+/* PS2 FIFO STATUS REGISTER */
+#define PS2_FSTS_TXUF		BIT(10)
+#define PS2_FSTS_TXOF		BIT(9)
+#define PS2_FSTS_TXRDY		BIT(8)
+#define PS2_FSTS_RXUF		BIT(2)
+#define PS2_FSTS_RXOF		BIT(1)
+#define PS2_FSTS_RXRDY		BIT(0)
+
+#define PS2_FIFO_ERROR_BIT \
+	(PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_RXUF | PS2_FSTS_RXOF)
+
+#define PS2_SAMPLE_CLK		1000000
+#define PS2_SCLK		125000
+
+struct sun4i_ps2data {
+	struct serio *serio;
+	struct device *dev;
+
+	/* IO mapping base */
+	void __iomem	*reg_base;
+
+	/* clock management */
+	struct clk	*clk;
+
+	/* irq */
+	spinlock_t	lock;
+	int		irq;
+};
+
+static irqreturn_t sun4i_ps2_interrupt(int irq, void *dev_id)
+{
+	struct sun4i_ps2data *drvdata = dev_id;
+	u32 intr_status;
+	u32 fifo_status;
+	unsigned char byte;
+	unsigned int rxflags = 0;
+	u32 rval;
+
+	guard(spinlock)(&drvdata->lock);
+
+	/* Get the PS/2 interrupts and clear them */
+	intr_status  = readl(drvdata->reg_base + PS2_REG_LSTS);
+	fifo_status  = readl(drvdata->reg_base + PS2_REG_FSTS);
+
+	/* Check line status register */
+	if (intr_status & PS2_LINE_ERROR_BIT) {
+		rxflags = (intr_status & PS2_LINE_ERROR_BIT) ? SERIO_FRAME : 0;
+		rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_PARITY : 0;
+		rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_TIMEOUT : 0;
+
+		rval = PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR |
+			PS2_LSTS_PARERR | PS2_LSTS_RXTDO;
+		writel(rval, drvdata->reg_base + PS2_REG_LSTS);
+	}
+
+	/* Check FIFO status register */
+	if (fifo_status & PS2_FIFO_ERROR_BIT) {
+		rval = PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_TXRDY |
+			PS2_FSTS_RXUF | PS2_FSTS_RXOF | PS2_FSTS_RXRDY;
+		writel(rval, drvdata->reg_base + PS2_REG_FSTS);
+	}
+
+	rval = (fifo_status >> 16) & 0x3;
+	while (rval--) {
+		byte = readl(drvdata->reg_base + PS2_REG_DATA) & 0xff;
+		serio_interrupt(drvdata->serio, byte, rxflags);
+	}
+
+	writel(intr_status, drvdata->reg_base + PS2_REG_LSTS);
+	writel(fifo_status, drvdata->reg_base + PS2_REG_FSTS);
+
+	return IRQ_HANDLED;
+}
+
+static int sun4i_ps2_open(struct serio *serio)
+{
+	struct sun4i_ps2data *drvdata = serio->port_data;
+	u32 src_clk = 0;
+	u32 clk_scdf;
+	u32 clk_pcdf;
+	u32 rval;
+
+	/* Set line control and enable interrupt */
+	rval = PS2_LCTL_STOPERREN | PS2_LCTL_ACKERREN
+		| PS2_LCTL_PARERREN | PS2_LCTL_RXDTOEN;
+	writel(rval, drvdata->reg_base + PS2_REG_LCTL);
+
+	/* Reset FIFO */
+	rval = PS2_FCTL_TXRST | PS2_FCTL_RXRST | PS2_FCTL_TXUFIEN
+		| PS2_FCTL_TXOFIEN | PS2_FCTL_RXUFIEN
+		| PS2_FCTL_RXOFIEN | PS2_FCTL_RXRDYIEN;
+
+	writel(rval, drvdata->reg_base + PS2_REG_FCTL);
+
+	src_clk = clk_get_rate(drvdata->clk);
+	/* Set clock divider register */
+	clk_scdf = src_clk / PS2_SAMPLE_CLK - 1;
+	clk_pcdf = PS2_SAMPLE_CLK / PS2_SCLK - 1;
+	rval = (clk_scdf << 8) | clk_pcdf;
+	writel(rval, drvdata->reg_base + PS2_REG_CLKDR);
+
+	/* Set global control register */
+	rval = PS2_GCTL_RESET | PS2_GCTL_INTEN | PS2_GCTL_MASTER
+		| PS2_GCTL_BUSEN;
+
+	guard(spinlock_irqsave)(&drvdata->lock);
+	writel(rval, drvdata->reg_base + PS2_REG_GCTL);
+
+	return 0;
+}
+
+static void sun4i_ps2_close(struct serio *serio)
+{
+	struct sun4i_ps2data *drvdata = serio->port_data;
+	u32 rval;
+
+	/* Shut off the interrupt */
+	rval = readl(drvdata->reg_base + PS2_REG_GCTL);
+	writel(rval & ~(PS2_GCTL_INTEN), drvdata->reg_base + PS2_REG_GCTL);
+
+	synchronize_irq(drvdata->irq);
+}
+
+static int sun4i_ps2_write(struct serio *serio, unsigned char val)
+{
+	unsigned long expire = jiffies + msecs_to_jiffies(10000);
+	struct sun4i_ps2data *drvdata = serio->port_data;
+
+	do {
+		if (readl(drvdata->reg_base + PS2_REG_FSTS) & PS2_FSTS_TXRDY) {
+			writel(val, drvdata->reg_base + PS2_REG_DATA);
+			return 0;
+		}
+	} while (time_before(jiffies, expire));
+
+	return SERIO_TIMEOUT;
+}
+
+static int sun4i_ps2_probe(struct platform_device *pdev)
+{
+	struct resource *res; /* IO mem resources */
+	struct sun4i_ps2data *drvdata;
+	struct serio *serio;
+	struct device *dev = &pdev->dev;
+	int error;
+
+	drvdata = kzalloc_obj(*drvdata);
+	serio = kzalloc_obj(*serio);
+	if (!drvdata || !serio) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	spin_lock_init(&drvdata->lock);
+
+	/* IO */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "failed to locate registers\n");
+		error = -ENXIO;
+		goto err_free_mem;
+	}
+
+	drvdata->reg_base = ioremap(res->start, resource_size(res));
+	if (!drvdata->reg_base) {
+		dev_err(dev, "failed to map registers\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	drvdata->clk = clk_get(dev, NULL);
+	if (IS_ERR(drvdata->clk)) {
+		error = PTR_ERR(drvdata->clk);
+		dev_err(dev, "couldn't get clock %d\n", error);
+		goto err_ioremap;
+	}
+
+	error = clk_prepare_enable(drvdata->clk);
+	if (error) {
+		dev_err(dev, "failed to enable clock %d\n", error);
+		goto err_clk;
+	}
+
+	serio->id.type = SERIO_8042;
+	serio->write = sun4i_ps2_write;
+	serio->open = sun4i_ps2_open;
+	serio->close = sun4i_ps2_close;
+	serio->port_data = drvdata;
+	serio->dev.parent = dev;
+	strscpy(serio->name, dev_name(dev), sizeof(serio->name));
+	strscpy(serio->phys, dev_name(dev), sizeof(serio->phys));
+
+	/* shutoff interrupt */
+	writel(0, drvdata->reg_base + PS2_REG_GCTL);
+
+	/* Get IRQ for the device */
+	drvdata->irq = platform_get_irq(pdev, 0);
+	if (drvdata->irq < 0) {
+		error = drvdata->irq;
+		goto err_disable_clk;
+	}
+
+	drvdata->serio = serio;
+	drvdata->dev = dev;
+
+	error = request_irq(drvdata->irq, sun4i_ps2_interrupt, 0,
+			    DRIVER_NAME, drvdata);
+	if (error) {
+		dev_err(drvdata->dev, "failed to allocate interrupt %d: %d\n",
+			drvdata->irq, error);
+		goto err_disable_clk;
+	}
+
+	serio_register_port(serio);
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;	/* success */
+
+err_disable_clk:
+	clk_disable_unprepare(drvdata->clk);
+err_clk:
+	clk_put(drvdata->clk);
+err_ioremap:
+	iounmap(drvdata->reg_base);
+err_free_mem:
+	kfree(serio);
+	kfree(drvdata);
+	return error;
+}
+
+static void sun4i_ps2_remove(struct platform_device *pdev)
+{
+	struct sun4i_ps2data *drvdata = platform_get_drvdata(pdev);
+
+	serio_unregister_port(drvdata->serio);
+
+	free_irq(drvdata->irq, drvdata);
+
+	clk_disable_unprepare(drvdata->clk);
+	clk_put(drvdata->clk);
+
+	iounmap(drvdata->reg_base);
+
+	kfree(drvdata);
+}
+
+static const struct of_device_id sun4i_ps2_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-ps2", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, sun4i_ps2_match);
+
+static struct platform_driver sun4i_ps2_driver = {
+	.probe		= sun4i_ps2_probe,
+	.remove		= sun4i_ps2_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = sun4i_ps2_match,
+	},
+};
+module_platform_driver(sun4i_ps2_driver);
+
+MODULE_AUTHOR("Vishnu Patekar <vishnupatekar0510@gmail.com>");
+MODULE_AUTHOR("Aaron.maoye <leafy.myeh@newbietech.com>");
+MODULE_DESCRIPTION("Allwinner A10/Sun4i PS/2 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/serio/userio.c b/drivers/input/serio/userio.c
new file mode 100644
index 000000000..8c19975c8
--- /dev/null
+++ b/drivers/input/serio/userio.c
@@ -0,0 +1,313 @@
+/*
+ * userio kernel serio device emulation module
+ * Copyright (C) 2015 Red Hat
+ * Copyright (C) 2015 Lyude Paul <thatslyude@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser
+ * General Public License for more details.
+ */
+
+#include <linux/circ_buf.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/sched.h>
+#include <linux/poll.h>
+#include <uapi/linux/userio.h>
+
+#define USERIO_NAME		"userio"
+#define USERIO_BUFSIZE		16
+
+static struct miscdevice userio_misc;
+
+struct userio_device {
+	struct serio *serio;
+	struct mutex mutex;
+
+	bool running;
+
+	u8 head;
+	u8 tail;
+
+	spinlock_t buf_lock;
+	unsigned char buf[USERIO_BUFSIZE];
+
+	wait_queue_head_t waitq;
+};
+
+/**
+ * userio_device_write - Write data from serio to a userio device in userspace
+ * @id: The serio port for the userio device
+ * @val: The data to write to the device
+ */
+static int userio_device_write(struct serio *id, unsigned char val)
+{
+	struct userio_device *userio = id->port_data;
+
+	scoped_guard(spinlock_irqsave, &userio->buf_lock) {
+		userio->buf[userio->head] = val;
+		userio->head = (userio->head + 1) % USERIO_BUFSIZE;
+
+		if (userio->head == userio->tail)
+			dev_warn(userio_misc.this_device,
+				 "Buffer overflowed, userio client isn't keeping up");
+	}
+
+	wake_up_interruptible(&userio->waitq);
+
+	return 0;
+}
+
+static int userio_char_open(struct inode *inode, struct file *file)
+{
+	struct userio_device *userio __free(kfree) =
+			kzalloc_obj(*userio);
+	if (!userio)
+		return -ENOMEM;
+
+	mutex_init(&userio->mutex);
+	spin_lock_init(&userio->buf_lock);
+	init_waitqueue_head(&userio->waitq);
+
+	userio->serio = kzalloc_obj(*userio->serio);
+	if (!userio->serio)
+		return -ENOMEM;
+
+	userio->serio->write = userio_device_write;
+	userio->serio->port_data = userio;
+
+	file->private_data = no_free_ptr(userio);
+
+	return 0;
+}
+
+static int userio_char_release(struct inode *inode, struct file *file)
+{
+	struct userio_device *userio = file->private_data;
+
+	if (userio->running) {
+		/*
+		 * Don't free the serio port here, serio_unregister_port()
+		 * does it for us.
+		 */
+		serio_unregister_port(userio->serio);
+	} else {
+		kfree(userio->serio);
+	}
+
+	kfree(userio);
+
+	return 0;
+}
+
+static size_t userio_fetch_data(struct userio_device *userio, u8 *buf,
+				size_t count, size_t *copylen)
+{
+	size_t available, len;
+
+	guard(spinlock_irqsave)(&userio->buf_lock);
+
+	available = CIRC_CNT_TO_END(userio->head, userio->tail,
+				    USERIO_BUFSIZE);
+	len = min(available, count);
+	if (len) {
+		memcpy(buf, &userio->buf[userio->tail], len);
+		userio->tail = (userio->tail + len) % USERIO_BUFSIZE;
+	}
+
+	*copylen = len;
+	return available;
+}
+
+static ssize_t userio_char_read(struct file *file, char __user *user_buffer,
+				size_t count, loff_t *ppos)
+{
+	struct userio_device *userio = file->private_data;
+	int error;
+	size_t available, copylen;
+	u8 buf[USERIO_BUFSIZE];
+
+	/*
+	 * By the time we get here, the data that was waiting might have
+	 * been taken by another thread. Grab the buffer lock and check if
+	 * there's still any data waiting, otherwise repeat this process
+	 * until we have data (unless the file descriptor is non-blocking
+	 * of course).
+	 */
+	for (;;) {
+		available = userio_fetch_data(userio, buf, count, &copylen);
+		if (available)
+			break;
+
+		/* buffer was/is empty */
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		/*
+		 * count == 0 is special - no IO is done but we check
+		 * for error conditions (see above).
+		 */
+		if (count == 0)
+			return 0;
+
+		error = wait_event_interruptible(userio->waitq,
+						 userio->head != userio->tail);
+		if (error)
+			return error;
+	}
+
+	if (copylen)
+		if (copy_to_user(user_buffer, buf, copylen))
+			return -EFAULT;
+
+	return copylen;
+}
+
+static int userio_execute_cmd(struct userio_device *userio,
+			      const struct userio_cmd *cmd)
+{
+	switch (cmd->type) {
+	case USERIO_CMD_REGISTER:
+		if (!userio->serio->id.type) {
+			dev_warn(userio_misc.this_device,
+				 "No port type given on /dev/userio\n");
+			return -EINVAL;
+		}
+
+		if (userio->running) {
+			dev_warn(userio_misc.this_device,
+				 "Begin command sent, but we're already running\n");
+			return -EBUSY;
+		}
+
+		userio->running = true;
+		serio_register_port(userio->serio);
+		break;
+
+	case USERIO_CMD_SET_PORT_TYPE:
+		if (userio->running) {
+			dev_warn(userio_misc.this_device,
+				 "Can't change port type on an already running userio instance\n");
+			return -EBUSY;
+		}
+
+		userio->serio->id.type = cmd->data;
+		break;
+
+	case USERIO_CMD_SET_PORT_EXTRA:
+		if (userio->running) {
+			dev_warn(userio_misc.this_device,
+				 "Can't change port extra on an already running userio instance\n");
+			return -EBUSY;
+		}
+
+		userio->serio->id.extra = cmd->data;
+		break;
+
+	case USERIO_CMD_SET_PORT_ID:
+		if (userio->running) {
+			dev_warn(userio_misc.this_device,
+				 "Can't change port id on an already running userio instance\n");
+			return -EBUSY;
+		}
+
+		userio->serio->id.id = cmd->data;
+		break;
+
+	case USERIO_CMD_SET_PORT_PROTO:
+		if (userio->running) {
+			dev_warn(userio_misc.this_device,
+				 "Can't change port proto on an already running userio instance\n");
+			return -EBUSY;
+		}
+
+		userio->serio->id.proto = cmd->data;
+		break;
+
+	case USERIO_CMD_SEND_INTERRUPT:
+		if (!userio->running) {
+			dev_warn(userio_misc.this_device,
+				 "The device must be registered before sending interrupts\n");
+			return -ENODEV;
+		}
+
+		serio_interrupt(userio->serio, cmd->data, 0);
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static ssize_t userio_char_write(struct file *file, const char __user *buffer,
+				 size_t count, loff_t *ppos)
+{
+	struct userio_device *userio = file->private_data;
+	struct userio_cmd cmd;
+	int error;
+
+	if (count != sizeof(cmd)) {
+		dev_warn(userio_misc.this_device, "Invalid payload size\n");
+		return -EINVAL;
+	}
+
+	if (copy_from_user(&cmd, buffer, sizeof(cmd)))
+		return -EFAULT;
+
+	scoped_cond_guard(mutex_intr, return -EINTR, &userio->mutex) {
+		error = userio_execute_cmd(userio, &cmd);
+		if (error)
+			return error;
+	}
+
+	return count;
+}
+
+static __poll_t userio_char_poll(struct file *file, poll_table *wait)
+{
+	struct userio_device *userio = file->private_data;
+
+	poll_wait(file, &userio->waitq, wait);
+
+	if (userio->head != userio->tail)
+		return EPOLLIN | EPOLLRDNORM;
+
+	return 0;
+}
+
+static const struct file_operations userio_fops = {
+	.owner		= THIS_MODULE,
+	.open		= userio_char_open,
+	.release	= userio_char_release,
+	.read		= userio_char_read,
+	.write		= userio_char_write,
+	.poll		= userio_char_poll,
+};
+
+static struct miscdevice userio_misc = {
+	.fops	= &userio_fops,
+	.minor	= USERIO_MINOR,
+	.name	= USERIO_NAME,
+};
+module_driver(userio_misc, misc_register, misc_deregister);
+
+MODULE_ALIAS_MISCDEV(USERIO_MINOR);
+MODULE_ALIAS("devname:" USERIO_NAME);
+
+MODULE_AUTHOR("Lyude Paul <thatslyude@gmail.com>");
+MODULE_DESCRIPTION("Virtual Serio Device Support");
+MODULE_LICENSE("GPL");