scftorture: Count single_rpc offline failures in statistics outputgrafted

scf_torture_stats_print() aggregates each invoker thread's counters
into a local scf_statistics structure before printing, but the
n_single_rpc_ofl field is missing from the aggregation loop.  As a
result, the "single_rpc_ofl" value printed in the statistics line is
always zero, even when smp_call_function_single() invocations for the
RPC test have failed due to offline CPUs and been counted by the
invoker threads.

Add the missing accumulation so that the printed value reflects the
actual counts.

Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

1 files changed, 222 insertions, 0 deletions

diff --git a/drivers/input/serio/parkbd.c b/drivers/input/serio/parkbd.c
new file mode 100644
index 000000000..09a24413d
--- /dev/null
+++ b/drivers/input/serio/parkbd.c
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Parallel port to Keyboard port adapter driver for Linux
+ *
+ *  Copyright (c) 1999-2004 Vojtech Pavlik
+ */
+
+
+/*
+ * To connect an AT or XT keyboard to the parallel port, a fairly simple adapter
+ * can be made:
+ * 
+ *  Parallel port            Keyboard port
+ *
+ *     +5V --------------------- +5V (4)
+ *  
+ *                 ______
+ *     +5V -------|______|--.
+ *                          |
+ *     ACK (10) ------------|
+ *                          |--- KBD CLOCK (5)
+ *     STROBE (1) ---|<|----'
+ *     
+ *                 ______
+ *     +5V -------|______|--.
+ *                          |
+ *     BUSY (11) -----------|
+ *                          |--- KBD DATA (1)
+ *     AUTOFD (14) --|<|----'
+ *
+ *     GND (18-25) ------------- GND (3)
+ *     
+ * The diodes can be fairly any type, and the resistors should be somewhere
+ * around 5 kOhm, but the adapter will likely work without the resistors,
+ * too.
+ *
+ * The +5V source can be taken either from USB, from mouse or keyboard ports,
+ * or from a joystick port. Unfortunately, the parallel port of a PC doesn't
+ * have a +5V pin, and feeding the keyboard from signal pins is out of question
+ * with 300 mA power reqirement of a typical AT keyboard.
+ */
+
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION("Parallel port to Keyboard port adapter driver");
+MODULE_LICENSE("GPL");
+
+static unsigned int parkbd_pp_no;
+module_param_named(port, parkbd_pp_no, int, 0);
+MODULE_PARM_DESC(port, "Parallel port the adapter is connected to (default is 0)");
+
+static unsigned int parkbd_mode = SERIO_8042;
+module_param_named(mode, parkbd_mode, uint, 0);
+MODULE_PARM_DESC(mode, "Mode of operation: XT = 0/AT = 1 (default)");
+
+#define PARKBD_CLOCK	0x01	/* Strobe & Ack */
+#define PARKBD_DATA	0x02	/* AutoFd & Busy */
+
+static int parkbd_buffer;
+static int parkbd_counter;
+static unsigned long parkbd_last;
+static int parkbd_writing;
+static unsigned long parkbd_start;
+
+static struct pardevice *parkbd_dev;
+static struct serio *parkbd_port;
+
+static int parkbd_readlines(void)
+{
+	return (parport_read_status(parkbd_dev->port) >> 6) ^ 2;
+}
+
+static void parkbd_writelines(int data)
+{
+	parport_write_control(parkbd_dev->port, (~data & 3) | 0x10);
+}
+
+static int parkbd_write(struct serio *port, unsigned char c)
+{
+	unsigned char p;
+
+	if (!parkbd_mode) return -1;
+
+        p = c ^ (c >> 4);
+	p = p ^ (p >> 2);
+	p = p ^ (p >> 1);
+
+	parkbd_counter = 0;
+	parkbd_writing = 1;
+	parkbd_buffer = c | (((int) (~p & 1)) << 8) | 0x600;
+
+	parkbd_writelines(2);
+
+	return 0;
+}
+
+static void parkbd_interrupt(void *dev_id)
+{
+
+	if (parkbd_writing) {
+
+		if (parkbd_counter && ((parkbd_counter == 11) || time_after(jiffies, parkbd_last + HZ/100))) {
+			parkbd_counter = 0;
+			parkbd_buffer = 0;
+			parkbd_writing = 0;
+			parkbd_writelines(3);
+			return;
+		}
+
+		parkbd_writelines(((parkbd_buffer >> parkbd_counter++) & 1) | 2);
+
+		if (parkbd_counter == 11) {
+			parkbd_counter = 0;
+			parkbd_buffer = 0;
+			parkbd_writing = 0;
+			parkbd_writelines(3);
+		}
+
+	} else {
+
+		if ((parkbd_counter == parkbd_mode + 10) || time_after(jiffies, parkbd_last + HZ/100)) {
+			parkbd_counter = 0;
+			parkbd_buffer = 0;
+		}
+
+		parkbd_buffer |= (parkbd_readlines() >> 1) << parkbd_counter++;
+
+		if (parkbd_counter == parkbd_mode + 10)
+			serio_interrupt(parkbd_port, (parkbd_buffer >> (2 - parkbd_mode)) & 0xff, 0);
+	}
+
+	parkbd_last = jiffies;
+}
+
+static int parkbd_getport(struct parport *pp)
+{
+	struct pardev_cb parkbd_parport_cb;
+
+	memset(&parkbd_parport_cb, 0, sizeof(parkbd_parport_cb));
+	parkbd_parport_cb.irq_func = parkbd_interrupt;
+	parkbd_parport_cb.flags = PARPORT_FLAG_EXCL;
+
+	parkbd_dev = parport_register_dev_model(pp, "parkbd",
+						&parkbd_parport_cb, 0);
+
+	if (!parkbd_dev)
+		return -ENODEV;
+
+	if (parport_claim(parkbd_dev)) {
+		parport_unregister_device(parkbd_dev);
+		return -EBUSY;
+	}
+
+	parkbd_start = jiffies;
+
+	return 0;
+}
+
+static struct serio *parkbd_allocate_serio(void)
+{
+	struct serio *serio;
+
+	serio = kzalloc_obj(*serio);
+	if (serio) {
+		serio->id.type = parkbd_mode;
+		serio->write = parkbd_write;
+		strscpy(serio->name, "PARKBD AT/XT keyboard adapter", sizeof(serio->name));
+		snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", parkbd_dev->port->name);
+	}
+
+	return serio;
+}
+
+static void parkbd_attach(struct parport *pp)
+{
+	if (pp->number != parkbd_pp_no) {
+		pr_debug("Not using parport%d.\n", pp->number);
+		return;
+	}
+
+	if (parkbd_getport(pp))
+		return;
+
+	parkbd_port = parkbd_allocate_serio();
+	if (!parkbd_port) {
+		parport_release(parkbd_dev);
+		parport_unregister_device(parkbd_dev);
+		return;
+	}
+
+	parkbd_writelines(3);
+
+	serio_register_port(parkbd_port);
+
+	printk(KERN_INFO "serio: PARKBD %s adapter on %s\n",
+                        parkbd_mode ? "AT" : "XT", parkbd_dev->port->name);
+
+	return;
+}
+
+static void parkbd_detach(struct parport *port)
+{
+	if (!parkbd_port || port->number != parkbd_pp_no)
+		return;
+
+	parport_release(parkbd_dev);
+	serio_unregister_port(parkbd_port);
+	parport_unregister_device(parkbd_dev);
+	parkbd_port = NULL;
+}
+
+static struct parport_driver parkbd_parport_driver = {
+	.name = "parkbd",
+	.match_port = parkbd_attach,
+	.detach = parkbd_detach,
+};
+module_parport_driver(parkbd_parport_driver);