Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 204 insertions, 0 deletions

diff --git a/drivers/input/serio/maceps2.c b/drivers/input/serio/maceps2.c
new file mode 100644
index 000000000..fb41e7f5a
--- /dev/null
+++ b/drivers/input/serio/maceps2.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SGI O2 MACE PS2 controller driver for linux
+ *
+ * Copyright (C) 2002 Vivien Chappelier
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/ip32/mace.h>
+#include <asm/ip32/ip32_ints.h>
+
+MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org");
+MODULE_DESCRIPTION("SGI O2 MACE PS2 controller driver");
+MODULE_LICENSE("GPL");
+
+#define MACE_PS2_TIMEOUT 10000 /* in 50us unit */
+
+#define PS2_STATUS_CLOCK_SIGNAL  BIT(0) /* external clock signal */
+#define PS2_STATUS_CLOCK_INHIBIT BIT(1) /* clken output signal */
+#define PS2_STATUS_TX_INPROGRESS BIT(2) /* transmission in progress */
+#define PS2_STATUS_TX_EMPTY      BIT(3) /* empty transmit buffer */
+#define PS2_STATUS_RX_FULL       BIT(4) /* full receive buffer */
+#define PS2_STATUS_RX_INPROGRESS BIT(5) /* reception in progress */
+#define PS2_STATUS_ERROR_PARITY  BIT(6) /* parity error */
+#define PS2_STATUS_ERROR_FRAMING BIT(7) /* framing error */
+
+#define PS2_CONTROL_TX_CLOCK_DISABLE BIT(0) /* inhibit clock signal after TX */
+#define PS2_CONTROL_TX_ENABLE        BIT(1) /* transmit enable */
+#define PS2_CONTROL_TX_INT_ENABLE    BIT(2) /* enable transmit interrupt */
+#define PS2_CONTROL_RX_INT_ENABLE    BIT(3) /* enable receive interrupt */
+#define PS2_CONTROL_RX_CLOCK_ENABLE  BIT(4) /* pause reception if set to 0 */
+#define PS2_CONTROL_RESET            BIT(5) /* reset */
+
+struct maceps2_data {
+	struct mace_ps2port *port;
+	int irq;
+};
+
+static struct maceps2_data port_data[2];
+static struct serio *maceps2_port[2];
+static struct platform_device *maceps2_device;
+
+static int maceps2_write(struct serio *dev, unsigned char val)
+{
+	struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
+	unsigned int timeout = MACE_PS2_TIMEOUT;
+
+	do {
+		if (port->status & PS2_STATUS_TX_EMPTY) {
+			port->tx = val;
+			return 0;
+		}
+		udelay(50);
+	} while (timeout--);
+
+	return -1;
+}
+
+static irqreturn_t maceps2_interrupt(int irq, void *dev_id)
+{
+	struct serio *dev = dev_id;
+	struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
+	unsigned long byte;
+
+	if (port->status & PS2_STATUS_RX_FULL) {
+		byte = port->rx;
+		serio_interrupt(dev, byte & 0xff, 0);
+        }
+
+	return IRQ_HANDLED;
+}
+
+static int maceps2_open(struct serio *dev)
+{
+	struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
+
+	if (request_irq(data->irq, maceps2_interrupt, 0, "PS2 port", dev)) {
+		printk(KERN_ERR "Could not allocate PS/2 IRQ\n");
+		return -EBUSY;
+	}
+
+	/* Reset port */
+	data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
+	udelay(100);
+
+        /* Enable interrupts */
+	data->port->control = PS2_CONTROL_RX_CLOCK_ENABLE |
+			      PS2_CONTROL_TX_ENABLE |
+			      PS2_CONTROL_RX_INT_ENABLE;
+
+	return 0;
+}
+
+static void maceps2_close(struct serio *dev)
+{
+	struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
+
+	data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
+	udelay(100);
+	free_irq(data->irq, dev);
+}
+
+
+static struct serio *maceps2_allocate_port(int idx)
+{
+	struct serio *serio;
+
+	serio = kzalloc_obj(*serio);
+	if (serio) {
+		serio->id.type		= SERIO_8042;
+		serio->write		= maceps2_write;
+		serio->open		= maceps2_open;
+		serio->close		= maceps2_close;
+		snprintf(serio->name, sizeof(serio->name), "MACE PS/2 port%d", idx);
+		snprintf(serio->phys, sizeof(serio->phys), "mace/serio%d", idx);
+		serio->port_data	= &port_data[idx];
+		serio->dev.parent	= &maceps2_device->dev;
+	}
+
+	return serio;
+}
+
+static int maceps2_probe(struct platform_device *dev)
+{
+	maceps2_port[0] = maceps2_allocate_port(0);
+	maceps2_port[1] = maceps2_allocate_port(1);
+	if (!maceps2_port[0] || !maceps2_port[1]) {
+		kfree(maceps2_port[0]);
+		kfree(maceps2_port[1]);
+		return -ENOMEM;
+	}
+
+	serio_register_port(maceps2_port[0]);
+	serio_register_port(maceps2_port[1]);
+
+	return 0;
+}
+
+static void maceps2_remove(struct platform_device *dev)
+{
+	serio_unregister_port(maceps2_port[0]);
+	serio_unregister_port(maceps2_port[1]);
+}
+
+static struct platform_driver maceps2_driver = {
+	.driver		= {
+		.name	= "maceps2",
+	},
+	.probe		= maceps2_probe,
+	.remove		= maceps2_remove,
+};
+
+static int __init maceps2_init(void)
+{
+	int error;
+
+	error = platform_driver_register(&maceps2_driver);
+	if (error)
+		return error;
+
+	maceps2_device = platform_device_alloc("maceps2", -1);
+	if (!maceps2_device) {
+		error = -ENOMEM;
+		goto err_unregister_driver;
+	}
+
+	port_data[0].port = &mace->perif.ps2.keyb;
+	port_data[0].irq  = MACEISA_KEYB_IRQ;
+	port_data[1].port = &mace->perif.ps2.mouse;
+	port_data[1].irq  = MACEISA_MOUSE_IRQ;
+
+	error = platform_device_add(maceps2_device);
+	if (error)
+		goto err_free_device;
+
+	return 0;
+
+ err_free_device:
+	platform_device_put(maceps2_device);
+ err_unregister_driver:
+	platform_driver_unregister(&maceps2_driver);
+	return error;
+}
+
+static void __exit maceps2_exit(void)
+{
+	platform_device_unregister(maceps2_device);
+	platform_driver_unregister(&maceps2_driver);
+}
+
+module_init(maceps2_init);
+module_exit(maceps2_exit);