arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 204 insertions, 0 deletions

diff --git a/drivers/input/serio/maceps2.c b/drivers/input/serio/maceps2.c
new file mode 100644
index 000000000..fb41e7f5a
--- /dev/null
+++ b/drivers/input/serio/maceps2.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SGI O2 MACE PS2 controller driver for linux
+ *
+ * Copyright (C) 2002 Vivien Chappelier
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/ip32/mace.h>
+#include <asm/ip32/ip32_ints.h>
+
+MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org");
+MODULE_DESCRIPTION("SGI O2 MACE PS2 controller driver");
+MODULE_LICENSE("GPL");
+
+#define MACE_PS2_TIMEOUT 10000 /* in 50us unit */
+
+#define PS2_STATUS_CLOCK_SIGNAL  BIT(0) /* external clock signal */
+#define PS2_STATUS_CLOCK_INHIBIT BIT(1) /* clken output signal */
+#define PS2_STATUS_TX_INPROGRESS BIT(2) /* transmission in progress */
+#define PS2_STATUS_TX_EMPTY      BIT(3) /* empty transmit buffer */
+#define PS2_STATUS_RX_FULL       BIT(4) /* full receive buffer */
+#define PS2_STATUS_RX_INPROGRESS BIT(5) /* reception in progress */
+#define PS2_STATUS_ERROR_PARITY  BIT(6) /* parity error */
+#define PS2_STATUS_ERROR_FRAMING BIT(7) /* framing error */
+
+#define PS2_CONTROL_TX_CLOCK_DISABLE BIT(0) /* inhibit clock signal after TX */
+#define PS2_CONTROL_TX_ENABLE        BIT(1) /* transmit enable */
+#define PS2_CONTROL_TX_INT_ENABLE    BIT(2) /* enable transmit interrupt */
+#define PS2_CONTROL_RX_INT_ENABLE    BIT(3) /* enable receive interrupt */
+#define PS2_CONTROL_RX_CLOCK_ENABLE  BIT(4) /* pause reception if set to 0 */
+#define PS2_CONTROL_RESET            BIT(5) /* reset */
+
+struct maceps2_data {
+	struct mace_ps2port *port;
+	int irq;
+};
+
+static struct maceps2_data port_data[2];
+static struct serio *maceps2_port[2];
+static struct platform_device *maceps2_device;
+
+static int maceps2_write(struct serio *dev, unsigned char val)
+{
+	struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
+	unsigned int timeout = MACE_PS2_TIMEOUT;
+
+	do {
+		if (port->status & PS2_STATUS_TX_EMPTY) {
+			port->tx = val;
+			return 0;
+		}
+		udelay(50);
+	} while (timeout--);
+
+	return -1;
+}
+
+static irqreturn_t maceps2_interrupt(int irq, void *dev_id)
+{
+	struct serio *dev = dev_id;
+	struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
+	unsigned long byte;
+
+	if (port->status & PS2_STATUS_RX_FULL) {
+		byte = port->rx;
+		serio_interrupt(dev, byte & 0xff, 0);
+        }
+
+	return IRQ_HANDLED;
+}
+
+static int maceps2_open(struct serio *dev)
+{
+	struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
+
+	if (request_irq(data->irq, maceps2_interrupt, 0, "PS2 port", dev)) {
+		printk(KERN_ERR "Could not allocate PS/2 IRQ\n");
+		return -EBUSY;
+	}
+
+	/* Reset port */
+	data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
+	udelay(100);
+
+        /* Enable interrupts */
+	data->port->control = PS2_CONTROL_RX_CLOCK_ENABLE |
+			      PS2_CONTROL_TX_ENABLE |
+			      PS2_CONTROL_RX_INT_ENABLE;
+
+	return 0;
+}
+
+static void maceps2_close(struct serio *dev)
+{
+	struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
+
+	data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
+	udelay(100);
+	free_irq(data->irq, dev);
+}
+
+
+static struct serio *maceps2_allocate_port(int idx)
+{
+	struct serio *serio;
+
+	serio = kzalloc_obj(*serio);
+	if (serio) {
+		serio->id.type		= SERIO_8042;
+		serio->write		= maceps2_write;
+		serio->open		= maceps2_open;
+		serio->close		= maceps2_close;
+		snprintf(serio->name, sizeof(serio->name), "MACE PS/2 port%d", idx);
+		snprintf(serio->phys, sizeof(serio->phys), "mace/serio%d", idx);
+		serio->port_data	= &port_data[idx];
+		serio->dev.parent	= &maceps2_device->dev;
+	}
+
+	return serio;
+}
+
+static int maceps2_probe(struct platform_device *dev)
+{
+	maceps2_port[0] = maceps2_allocate_port(0);
+	maceps2_port[1] = maceps2_allocate_port(1);
+	if (!maceps2_port[0] || !maceps2_port[1]) {
+		kfree(maceps2_port[0]);
+		kfree(maceps2_port[1]);
+		return -ENOMEM;
+	}
+
+	serio_register_port(maceps2_port[0]);
+	serio_register_port(maceps2_port[1]);
+
+	return 0;
+}
+
+static void maceps2_remove(struct platform_device *dev)
+{
+	serio_unregister_port(maceps2_port[0]);
+	serio_unregister_port(maceps2_port[1]);
+}
+
+static struct platform_driver maceps2_driver = {
+	.driver		= {
+		.name	= "maceps2",
+	},
+	.probe		= maceps2_probe,
+	.remove		= maceps2_remove,
+};
+
+static int __init maceps2_init(void)
+{
+	int error;
+
+	error = platform_driver_register(&maceps2_driver);
+	if (error)
+		return error;
+
+	maceps2_device = platform_device_alloc("maceps2", -1);
+	if (!maceps2_device) {
+		error = -ENOMEM;
+		goto err_unregister_driver;
+	}
+
+	port_data[0].port = &mace->perif.ps2.keyb;
+	port_data[0].irq  = MACEISA_KEYB_IRQ;
+	port_data[1].port = &mace->perif.ps2.mouse;
+	port_data[1].irq  = MACEISA_MOUSE_IRQ;
+
+	error = platform_device_add(maceps2_device);
+	if (error)
+		goto err_free_device;
+
+	return 0;
+
+ err_free_device:
+	platform_device_put(maceps2_device);
+ err_unregister_driver:
+	platform_driver_unregister(&maceps2_driver);
+	return error;
+}
+
+static void __exit maceps2_exit(void)
+{
+	platform_device_unregister(maceps2_device);
+	platform_driver_unregister(&maceps2_driver);
+}
+
+module_init(maceps2_init);
+module_exit(maceps2_exit);