iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 33 insertions, 0 deletions

diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
new file mode 100644
index 000000000..7f5137dc0
--- /dev/null
+++ b/drivers/input/serio/Makefile
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the input core drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_SERIO)		+= serio.o
+obj-$(CONFIG_SERIO_I8042)	+= i8042.o
+obj-$(CONFIG_SERIO_PARKBD)	+= parkbd.o
+obj-$(CONFIG_SERIO_SERPORT)	+= serport.o
+obj-$(CONFIG_SERIO_RPCKBD)	+= rpckbd.o
+obj-$(CONFIG_SERIO_SA1111)	+= sa1111ps2.o
+obj-$(CONFIG_SERIO_AMBAKMI)	+= ambakmi.o
+obj-$(CONFIG_SERIO_Q40KBD)	+= q40kbd.o
+obj-$(CONFIG_SERIO_GSCPS2)	+= gscps2.o
+obj-$(CONFIG_HP_SDC)		+= hp_sdc.o
+obj-$(CONFIG_HIL_MLC)		+= hp_sdc_mlc.o hil_mlc.o
+obj-$(CONFIG_SERIO_PCIPS2)	+= pcips2.o
+obj-$(CONFIG_SERIO_PS2MULT)	+= ps2mult.o
+obj-$(CONFIG_SERIO_MACEPS2)	+= maceps2.o
+obj-$(CONFIG_SERIO_SGI_IOC3)	+= ioc3kbd.o
+obj-$(CONFIG_SERIO_LIBPS2)	+= libps2.o
+obj-$(CONFIG_SERIO_RAW)		+= serio_raw.o
+obj-$(CONFIG_SERIO_AMS_DELTA)	+= ams_delta_serio.o
+obj-$(CONFIG_SERIO_ALTERA_PS2)	+= altera_ps2.o
+obj-$(CONFIG_SERIO_ARC_PS2)	+= arc_ps2.o
+obj-$(CONFIG_SERIO_APBPS2)	+= apbps2.o
+obj-$(CONFIG_SERIO_OLPC_APSP)	+= olpc_apsp.o
+obj-$(CONFIG_HYPERV_KEYBOARD)	+= hyperv-keyboard.o
+obj-$(CONFIG_SERIO_SUN4I_PS2)	+= sun4i-ps2.o
+obj-$(CONFIG_SERIO_GPIO_PS2)	+= ps2-gpio.o
+obj-$(CONFIG_USERIO)		+= userio.o