Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 468 insertions, 0 deletions

diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c
new file mode 100644
index 000000000..aaecdd3d5
--- /dev/null
+++ b/drivers/input/mouse/vmmouse.c
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Virtual PS/2 Mouse on VMware and QEMU hypervisors.
+ *
+ * Copyright (C) 2014, VMware, Inc. All Rights Reserved.
+ *
+ * Twin device code is hugely inspired by the ALPS driver.
+ * Authors:
+ *   Dmitry Torokhov <dmitry.torokhov@gmail.com>
+ *   Thomas Hellstrom <thellstrom@vmware.com>
+ */
+
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/libps2.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <asm/hypervisor.h>
+#include <asm/vmware.h>
+
+#include "psmouse.h"
+#include "vmmouse.h"
+
+/*
+ * Main commands supported by the vmmouse hypervisor port.
+ */
+#define VMWARE_CMD_ABSPOINTER_DATA	39
+#define VMWARE_CMD_ABSPOINTER_STATUS	40
+#define VMWARE_CMD_ABSPOINTER_COMMAND	41
+#define VMWARE_CMD_ABSPOINTER_RESTRICT	86
+
+/*
+ * Subcommands for VMWARE_CMD_ABSPOINTER_COMMAND
+ */
+#define VMMOUSE_CMD_ENABLE			0x45414552U
+#define VMMOUSE_CMD_DISABLE			0x000000f5U
+#define VMMOUSE_CMD_REQUEST_RELATIVE		0x4c455252U
+#define VMMOUSE_CMD_REQUEST_ABSOLUTE		0x53424152U
+
+#define VMMOUSE_ERROR				0xffff0000U
+
+#define VMMOUSE_VERSION_ID			0x3442554aU
+
+#define VMMOUSE_RELATIVE_PACKET			0x00010000U
+
+#define VMMOUSE_LEFT_BUTTON			0x20
+#define VMMOUSE_RIGHT_BUTTON			0x10
+#define VMMOUSE_MIDDLE_BUTTON			0x08
+
+/*
+ * VMMouse Restrict command
+ */
+#define VMMOUSE_RESTRICT_ANY                    0x00
+#define VMMOUSE_RESTRICT_CPL0                   0x01
+#define VMMOUSE_RESTRICT_IOPL                   0x02
+
+#define VMMOUSE_MAX_X                           0xFFFF
+#define VMMOUSE_MAX_Y                           0xFFFF
+
+#define VMMOUSE_VENDOR "VMware"
+#define VMMOUSE_NAME   "VMMouse"
+
+/**
+ * struct vmmouse_data - private data structure for the vmmouse driver
+ *
+ * @abs_dev: "Absolute" device used to report absolute mouse movement.
+ * @phys: Physical path for the absolute device.
+ * @dev_name: Name attribute name for the absolute device.
+ */
+struct vmmouse_data {
+	struct input_dev *abs_dev;
+	char phys[32];
+	char dev_name[128];
+};
+
+/**
+ * vmmouse_report_button - report button state on the correct input device
+ *
+ * @psmouse:  Pointer to the psmouse struct
+ * @abs_dev:  The absolute input device
+ * @rel_dev:  The relative input device
+ * @pref_dev: The preferred device for reporting
+ * @code:     Button code
+ * @value:    Button value
+ *
+ * Report @value and @code on @pref_dev, unless the button is already
+ * pressed on the other device, in which case the state is reported on that
+ * device.
+ */
+static void vmmouse_report_button(struct psmouse *psmouse,
+				  struct input_dev *abs_dev,
+				  struct input_dev *rel_dev,
+				  struct input_dev *pref_dev,
+				  unsigned int code, int value)
+{
+	if (test_bit(code, abs_dev->key))
+		pref_dev = abs_dev;
+	else if (test_bit(code, rel_dev->key))
+		pref_dev = rel_dev;
+
+	input_report_key(pref_dev, code, value);
+}
+
+/**
+ * vmmouse_report_events - process events on the vmmouse communications channel
+ *
+ * @psmouse: Pointer to the psmouse struct
+ *
+ * This function pulls events from the vmmouse communications channel and
+ * reports them on the correct (absolute or relative) input device. When the
+ * communications channel is drained, or if we've processed more than 255
+ * psmouse commands, the function returns PSMOUSE_FULL_PACKET. If there is a
+ * host- or synchronization error, the function returns PSMOUSE_BAD_DATA in
+ * the hope that the caller will reset the communications channel.
+ */
+static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
+{
+	struct input_dev *rel_dev = psmouse->dev;
+	struct vmmouse_data *priv = psmouse->private;
+	struct input_dev *abs_dev = priv->abs_dev;
+	struct input_dev *pref_dev;
+	u32 status, x, y, z;
+	unsigned int queue_length;
+	unsigned int count = 255;
+
+	while (count--) {
+		/* See if we have motion data. */
+		status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
+		if ((status & VMMOUSE_ERROR) == VMMOUSE_ERROR) {
+			psmouse_err(psmouse, "failed to fetch status data\n");
+			/*
+			 * After a few attempts this will result in
+			 * reconnect.
+			 */
+			return PSMOUSE_BAD_DATA;
+		}
+
+		queue_length = status & 0xffff;
+		if (queue_length == 0)
+			break;
+
+		if (queue_length % 4) {
+			psmouse_err(psmouse, "invalid queue length\n");
+			return PSMOUSE_BAD_DATA;
+		}
+
+		/* Now get it */
+		status = vmware_hypercall4(VMWARE_CMD_ABSPOINTER_DATA, 4,
+					   &x, &y, &z);
+
+		/*
+		 * And report what we've got. Prefer to report button
+		 * events on the same device where we report motion events.
+		 * This doesn't work well with the mouse wheel, though. See
+		 * below. Ideally we would want to report that on the
+		 * preferred device as well.
+		 */
+		if (status & VMMOUSE_RELATIVE_PACKET) {
+			pref_dev = rel_dev;
+			input_report_rel(rel_dev, REL_X, (s32)x);
+			input_report_rel(rel_dev, REL_Y, -(s32)y);
+		} else {
+			pref_dev = abs_dev;
+			input_report_abs(abs_dev, ABS_X, x);
+			input_report_abs(abs_dev, ABS_Y, y);
+		}
+
+		/* Xorg seems to ignore wheel events on absolute devices */
+		input_report_rel(rel_dev, REL_WHEEL, -(s8)((u8) z));
+
+		vmmouse_report_button(psmouse, abs_dev, rel_dev,
+				      pref_dev, BTN_LEFT,
+				      status & VMMOUSE_LEFT_BUTTON);
+		vmmouse_report_button(psmouse, abs_dev, rel_dev,
+				      pref_dev, BTN_RIGHT,
+				      status & VMMOUSE_RIGHT_BUTTON);
+		vmmouse_report_button(psmouse, abs_dev, rel_dev,
+				      pref_dev, BTN_MIDDLE,
+				      status & VMMOUSE_MIDDLE_BUTTON);
+		input_sync(abs_dev);
+		input_sync(rel_dev);
+	}
+
+	return PSMOUSE_FULL_PACKET;
+}
+
+/**
+ * vmmouse_process_byte - process data on the ps/2 channel
+ *
+ * @psmouse: Pointer to the psmouse struct
+ *
+ * When the ps/2 channel indicates that there is vmmouse data available,
+ * call vmmouse channel processing. Otherwise, continue to accept bytes. If
+ * there is a synchronization or communication data error, return
+ * PSMOUSE_BAD_DATA in the hope that the caller will reset the mouse.
+ */
+static psmouse_ret_t vmmouse_process_byte(struct psmouse *psmouse)
+{
+	unsigned char *packet = psmouse->packet;
+
+	switch (psmouse->pktcnt) {
+	case 1:
+		return (packet[0] & 0x8) == 0x8 ?
+			PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA;
+
+	case 2:
+		return PSMOUSE_GOOD_DATA;
+
+	default:
+		return vmmouse_report_events(psmouse);
+	}
+}
+
+/**
+ * vmmouse_disable - Disable vmmouse
+ *
+ * @psmouse: Pointer to the psmouse struct
+ *
+ * Tries to disable vmmouse mode.
+ */
+static void vmmouse_disable(struct psmouse *psmouse)
+{
+	u32 status;
+
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE);
+
+	status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
+	if ((status & VMMOUSE_ERROR) != VMMOUSE_ERROR)
+		psmouse_warn(psmouse, "failed to disable vmmouse device\n");
+}
+
+/**
+ * vmmouse_enable - Enable vmmouse and request absolute mode.
+ *
+ * @psmouse: Pointer to the psmouse struct
+ *
+ * Tries to enable vmmouse mode. Performs basic checks and requests
+ * absolute vmmouse mode.
+ * Returns 0 on success, -ENODEV on failure.
+ */
+static int vmmouse_enable(struct psmouse *psmouse)
+{
+	u32 status, version;
+
+	/*
+	 * Try enabling the device. If successful, we should be able to
+	 * read valid version ID back from it.
+	 */
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE);
+
+	/*
+	 * See if version ID can be retrieved.
+	 */
+	status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
+	if ((status & 0x0000ffff) == 0) {
+		psmouse_dbg(psmouse, "empty flags - assuming no device\n");
+		return -ENXIO;
+	}
+
+	version = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_DATA,
+				    1 /* single item */);
+	if (version != VMMOUSE_VERSION_ID) {
+		psmouse_dbg(psmouse, "Unexpected version value: %u vs %u\n",
+			    (unsigned) version, VMMOUSE_VERSION_ID);
+		vmmouse_disable(psmouse);
+		return -ENXIO;
+	}
+
+	/*
+	 * Restrict ioport access, if possible.
+	 */
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_RESTRICT,
+			  VMMOUSE_RESTRICT_CPL0);
+
+	vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND,
+			  VMMOUSE_CMD_REQUEST_ABSOLUTE);
+
+	return 0;
+}
+
+/*
+ * Array of supported hypervisors.
+ */
+static enum x86_hypervisor_type vmmouse_supported_hypervisors[] = {
+	X86_HYPER_VMWARE,
+	X86_HYPER_KVM,
+};
+
+/**
+ * vmmouse_check_hypervisor - Check if we're running on a supported hypervisor
+ */
+static bool vmmouse_check_hypervisor(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vmmouse_supported_hypervisors); i++)
+		if (vmmouse_supported_hypervisors[i] == x86_hyper_type)
+			return true;
+
+	return false;
+}
+
+/**
+ * vmmouse_detect - Probe whether vmmouse is available
+ *
+ * @psmouse: Pointer to the psmouse struct
+ * @set_properties: Whether to set psmouse name and vendor
+ *
+ * Returns 0 if vmmouse channel is available. Negative error code if not.
+ */
+int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
+{
+	u32 response, version, type;
+
+	if (!vmmouse_check_hypervisor()) {
+		psmouse_dbg(psmouse,
+			    "VMMouse not running on supported hypervisor.\n");
+		return -ENXIO;
+	}
+
+	/* Check if the device is present */
+	response = ~VMWARE_HYPERVISOR_MAGIC;
+	version = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &response, &type);
+	if (response != VMWARE_HYPERVISOR_MAGIC || version == 0xffffffffU)
+		return -ENXIO;
+
+	if (set_properties) {
+		psmouse->vendor = VMMOUSE_VENDOR;
+		psmouse->name = VMMOUSE_NAME;
+		psmouse->model = version;
+	}
+
+	return 0;
+}
+
+/**
+ * vmmouse_reset - Disable vmmouse and reset
+ *
+ * @psmouse: Pointer to the psmouse struct
+ *
+ * Tries to disable vmmouse mode before enter suspend.
+ */
+static void vmmouse_reset(struct psmouse *psmouse)
+{
+	vmmouse_disable(psmouse);
+	psmouse_reset(psmouse);
+}
+
+/**
+ * vmmouse_disconnect - Take down vmmouse driver
+ *
+ * @psmouse: Pointer to the psmouse struct
+ *
+ * Takes down vmmouse driver and frees resources set up in vmmouse_init().
+ */
+static void vmmouse_disconnect(struct psmouse *psmouse)
+{
+	struct vmmouse_data *priv = psmouse->private;
+
+	vmmouse_disable(psmouse);
+	psmouse_reset(psmouse);
+	input_unregister_device(priv->abs_dev);
+	kfree(priv);
+}
+
+/**
+ * vmmouse_reconnect - Reset the ps/2 - and vmmouse connections
+ *
+ * @psmouse: Pointer to the psmouse struct
+ *
+ * Attempts to reset the mouse connections. Returns 0 on success and
+ * -1 on failure.
+ */
+static int vmmouse_reconnect(struct psmouse *psmouse)
+{
+	int error;
+
+	psmouse_reset(psmouse);
+	vmmouse_disable(psmouse);
+	error = vmmouse_enable(psmouse);
+	if (error) {
+		psmouse_err(psmouse,
+			    "Unable to re-enable mouse when reconnecting, err: %d\n",
+			    error);
+		return error;
+	}
+
+	return 0;
+}
+
+/**
+ * vmmouse_init - Initialize the vmmouse driver
+ *
+ * @psmouse: Pointer to the psmouse struct
+ *
+ * Requests the device and tries to enable vmmouse mode.
+ * If successful, sets up the input device for relative movement events.
+ * It also allocates another input device and sets it up for absolute motion
+ * events. Returns 0 on success and -1 on failure.
+ */
+int vmmouse_init(struct psmouse *psmouse)
+{
+	struct vmmouse_data *priv;
+	struct input_dev *rel_dev = psmouse->dev, *abs_dev;
+	int error;
+
+	psmouse_reset(psmouse);
+	error = vmmouse_enable(psmouse);
+	if (error)
+		return error;
+
+	priv = kzalloc_obj(*priv);
+	abs_dev = input_allocate_device();
+	if (!priv || !abs_dev) {
+		error = -ENOMEM;
+		goto init_fail;
+	}
+
+	priv->abs_dev = abs_dev;
+	psmouse->private = priv;
+
+	/* Set up and register absolute device */
+	snprintf(priv->phys, sizeof(priv->phys), "%s/input1",
+		 psmouse->ps2dev.serio->phys);
+
+	/* Mimic name setup for relative device in psmouse-base.c */
+	snprintf(priv->dev_name, sizeof(priv->dev_name), "%s %s %s",
+		 VMMOUSE_PSNAME, VMMOUSE_VENDOR, VMMOUSE_NAME);
+	abs_dev->phys = priv->phys;
+	abs_dev->name = priv->dev_name;
+	abs_dev->id.bustype = BUS_I8042;
+	abs_dev->id.vendor = 0x0002;
+	abs_dev->id.product = PSMOUSE_VMMOUSE;
+	abs_dev->id.version = psmouse->model;
+	abs_dev->dev.parent = &psmouse->ps2dev.serio->dev;
+
+	/* Set absolute device capabilities */
+	input_set_capability(abs_dev, EV_KEY, BTN_LEFT);
+	input_set_capability(abs_dev, EV_KEY, BTN_RIGHT);
+	input_set_capability(abs_dev, EV_KEY, BTN_MIDDLE);
+	input_set_capability(abs_dev, EV_ABS, ABS_X);
+	input_set_capability(abs_dev, EV_ABS, ABS_Y);
+	input_set_abs_params(abs_dev, ABS_X, 0, VMMOUSE_MAX_X, 0, 0);
+	input_set_abs_params(abs_dev, ABS_Y, 0, VMMOUSE_MAX_Y, 0, 0);
+
+	error = input_register_device(priv->abs_dev);
+	if (error)
+		goto init_fail;
+
+	/* Add wheel capability to the relative device */
+	input_set_capability(rel_dev, EV_REL, REL_WHEEL);
+
+	psmouse->protocol_handler = vmmouse_process_byte;
+	psmouse->disconnect = vmmouse_disconnect;
+	psmouse->reconnect = vmmouse_reconnect;
+	psmouse->cleanup = vmmouse_reset;
+
+	return 0;
+
+init_fail:
+	vmmouse_disable(psmouse);
+	psmouse_reset(psmouse);
+	input_free_device(abs_dev);
+	kfree(priv);
+	psmouse->private = NULL;
+
+	return error;
+}