Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 340 insertions, 0 deletions

diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c
new file mode 100644
index 000000000..c334a4887
--- /dev/null
+++ b/drivers/input/mouse/sermouse.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ *  Serial mouse driver for Linux
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Serial mouse driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static const char *sermouse_protocols[] = { "None", "Mouse Systems Mouse", "Sun Mouse", "Microsoft Mouse",
+					"Logitech M+ Mouse", "Microsoft MZ Mouse", "Logitech MZ+ Mouse",
+					"Logitech MZ++ Mouse"};
+
+struct sermouse {
+	struct input_dev *dev;
+	signed char buf[8];
+	unsigned char count;
+	unsigned char type;
+	unsigned long last;
+	char phys[32];
+};
+
+/*
+ * sermouse_process_msc() analyzes the incoming MSC/Sun bytestream and
+ * applies some prediction to the data, resulting in 96 updates per
+ * second, which is as good as a PS/2 or USB mouse.
+ */
+
+static void sermouse_process_msc(struct sermouse *sermouse, signed char data)
+{
+	struct input_dev *dev = sermouse->dev;
+	signed char *buf = sermouse->buf;
+
+	switch (sermouse->count) {
+
+		case 0:
+			if ((data & 0xf8) != 0x80)
+				return;
+			input_report_key(dev, BTN_LEFT,   !(data & 4));
+			input_report_key(dev, BTN_RIGHT,  !(data & 1));
+			input_report_key(dev, BTN_MIDDLE, !(data & 2));
+			break;
+
+		case 1:
+		case 3:
+			input_report_rel(dev, REL_X, data / 2);
+			input_report_rel(dev, REL_Y, -buf[1]);
+			buf[0] = data - data / 2;
+			break;
+
+		case 2:
+		case 4:
+			input_report_rel(dev, REL_X, buf[0]);
+			input_report_rel(dev, REL_Y, buf[1] - data);
+			buf[1] = data / 2;
+			break;
+	}
+
+	input_sync(dev);
+
+	if (++sermouse->count == 5)
+		sermouse->count = 0;
+}
+
+/*
+ * sermouse_process_ms() anlyzes the incoming MS(Z/+/++) bytestream and
+ * generates events. With prediction it gets 80 updates/sec, assuming
+ * standard 3-byte packets and 1200 bps.
+ */
+
+static void sermouse_process_ms(struct sermouse *sermouse, signed char data)
+{
+	struct input_dev *dev = sermouse->dev;
+	signed char *buf = sermouse->buf;
+
+	if (data & 0x40)
+		sermouse->count = 0;
+	else if (sermouse->count == 0)
+		return;
+
+	switch (sermouse->count) {
+
+		case 0:
+			buf[1] = data;
+			input_report_key(dev, BTN_LEFT,   (data >> 5) & 1);
+			input_report_key(dev, BTN_RIGHT,  (data >> 4) & 1);
+			break;
+
+		case 1:
+			buf[2] = data;
+			data = (signed char) (((buf[1] << 6) & 0xc0) | (data & 0x3f));
+			input_report_rel(dev, REL_X, data / 2);
+			input_report_rel(dev, REL_Y, buf[4]);
+			buf[3] = data - data / 2;
+			break;
+
+		case 2:
+			/* Guessing the state of the middle button on 3-button MS-protocol mice - ugly. */
+			if ((sermouse->type == SERIO_MS) && !data && !buf[2] && !((buf[0] & 0xf0) ^ buf[1]))
+				input_report_key(dev, BTN_MIDDLE, !test_bit(BTN_MIDDLE, dev->key));
+			buf[0] = buf[1];
+
+			data = (signed char) (((buf[1] << 4) & 0xc0) | (data & 0x3f));
+			input_report_rel(dev, REL_X, buf[3]);
+			input_report_rel(dev, REL_Y, data - buf[4]);
+			buf[4] = data / 2;
+			break;
+
+		case 3:
+
+			switch (sermouse->type) {
+
+				case SERIO_MS:
+					sermouse->type = SERIO_MP;
+					fallthrough;
+
+				case SERIO_MP:
+					if ((data >> 2) & 3) break;	/* M++ Wireless Extension packet. */
+					input_report_key(dev, BTN_MIDDLE, (data >> 5) & 1);
+					input_report_key(dev, BTN_SIDE,   (data >> 4) & 1);
+					break;
+
+				case SERIO_MZP:
+				case SERIO_MZPP:
+					input_report_key(dev, BTN_SIDE,   (data >> 5) & 1);
+					fallthrough;
+
+				case SERIO_MZ:
+					input_report_key(dev, BTN_MIDDLE, (data >> 4) & 1);
+					input_report_rel(dev, REL_WHEEL,  (data & 8) - (data & 7));
+					break;
+			}
+
+			break;
+
+		case 4:
+		case 6:	/* MZ++ packet type. We can get these bytes for M++ too but we ignore them later. */
+			buf[1] = (data >> 2) & 0x0f;
+			break;
+
+		case 5:
+		case 7: /* Ignore anything besides MZ++ */
+			if (sermouse->type != SERIO_MZPP)
+				break;
+
+			switch (buf[1]) {
+
+				case 1: /* Extra mouse info */
+
+					input_report_key(dev, BTN_SIDE, (data >> 4) & 1);
+					input_report_key(dev, BTN_EXTRA, (data >> 5) & 1);
+					input_report_rel(dev, data & 0x80 ? REL_HWHEEL : REL_WHEEL, (data & 7) - (data & 8));
+
+					break;
+
+				default: /* We don't decode anything else yet. */
+
+					printk(KERN_WARNING
+						"sermouse.c: Received MZ++ packet %x, don't know how to handle.\n", buf[1]);
+					break;
+			}
+
+			break;
+	}
+
+	input_sync(dev);
+
+	sermouse->count++;
+}
+
+/*
+ * sermouse_interrupt() handles incoming characters, either gathering them into
+ * packets or passing them to the command routine as command output.
+ */
+
+static irqreturn_t sermouse_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct sermouse *sermouse = serio_get_drvdata(serio);
+
+	if (time_after(jiffies, sermouse->last + HZ/10))
+		sermouse->count = 0;
+
+	sermouse->last = jiffies;
+
+	if (sermouse->type > SERIO_SUN)
+		sermouse_process_ms(sermouse, data);
+	else
+		sermouse_process_msc(sermouse, data);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * sermouse_disconnect() cleans up after we don't want talk
+ * to the mouse anymore.
+ */
+
+static void sermouse_disconnect(struct serio *serio)
+{
+	struct sermouse *sermouse = serio_get_drvdata(serio);
+
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_unregister_device(sermouse->dev);
+	kfree(sermouse);
+}
+
+/*
+ * sermouse_connect() is a callback form the serio module when
+ * an unhandled serio port is found.
+ */
+
+static int sermouse_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct sermouse *sermouse;
+	struct input_dev *input_dev;
+	unsigned char c = serio->id.extra;
+	int err = -ENOMEM;
+
+	sermouse = kzalloc_obj(*sermouse);
+	input_dev = input_allocate_device();
+	if (!sermouse || !input_dev)
+		goto fail1;
+
+	sermouse->dev = input_dev;
+	snprintf(sermouse->phys, sizeof(sermouse->phys), "%s/input0", serio->phys);
+	sermouse->type = serio->id.proto;
+
+	input_dev->name = sermouse_protocols[sermouse->type];
+	input_dev->phys = sermouse->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor  = sermouse->type;
+	input_dev->id.product = c;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+	input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
+		BIT_MASK(BTN_RIGHT);
+	input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+
+	if (c & 0x01) set_bit(BTN_MIDDLE, input_dev->keybit);
+	if (c & 0x02) set_bit(BTN_SIDE, input_dev->keybit);
+	if (c & 0x04) set_bit(BTN_EXTRA, input_dev->keybit);
+	if (c & 0x10) set_bit(REL_WHEEL, input_dev->relbit);
+	if (c & 0x20) set_bit(REL_HWHEEL, input_dev->relbit);
+
+	serio_set_drvdata(serio, sermouse);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(sermouse->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(sermouse);
+	return err;
+}
+
+static struct serio_device_id sermouse_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MSC,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_SUN,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MS,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MP,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MZ,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MZP,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MZPP,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, sermouse_serio_ids);
+
+static struct serio_driver sermouse_drv = {
+	.driver		= {
+		.name	= "sermouse",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= sermouse_serio_ids,
+	.interrupt	= sermouse_interrupt,
+	.connect	= sermouse_connect,
+	.disconnect	= sermouse_disconnect,
+};
+
+module_serio_driver(sermouse_drv);