drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 153 insertions, 0 deletions

diff --git a/drivers/input/mouse/atarimouse.c b/drivers/input/mouse/atarimouse.c
new file mode 100644
index 000000000..b1219cc4d
--- /dev/null
+++ b/drivers/input/mouse/atarimouse.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Atari mouse driver for Linux/m68k
+ *
+ *  Copyright (c) 2005 Michael Schmitz
+ *
+ *  Based on:
+ *  Amiga mouse driver for Linux/m68k
+ *
+ *  Copyright (c) 2000-2002 Vojtech Pavlik
+ */
+/*
+ * The low level init and interrupt stuff is handled in arch/mm68k/atari/atakeyb.c
+ * (the keyboard ACIA also handles the mouse and joystick data, and the keyboard
+ * interrupt is shared with the MIDI ACIA so MIDI data also get handled there).
+ * This driver only deals with handing key events off to the input layer.
+ *
+ * Largely based on the old:
+ *
+ * Atari Mouse Driver for Linux
+ * by Robert de Vries (robert@and.nl) 19Jul93
+ *
+ * 16 Nov 1994 Andreas Schwab
+ * Compatibility with busmouse
+ * Support for three button mouse (shamelessly stolen from MiNT)
+ * third button wired to one of the joystick directions on joystick 1
+ *
+ * 1996/02/11 Andreas Schwab
+ * Module support
+ * Allow multiple open's
+ *
+ * Converted to use new generic busmouse code.  5 Apr 1998
+ *   Russell King <rmk@arm.uk.linux.org>
+ */
+
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <linux/uaccess.h>
+#include <asm/atarihw.h>
+#include <asm/atarikb.h>
+#include <asm/atariints.h>
+
+MODULE_AUTHOR("Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>");
+MODULE_DESCRIPTION("Atari mouse driver");
+MODULE_LICENSE("GPL");
+
+static int mouse_threshold[2] = {2, 2};
+module_param_array(mouse_threshold, int, NULL, 0);
+
+#ifdef FIXED_ATARI_JOYSTICK
+extern int atari_mouse_buttons;
+#endif
+
+static struct input_dev *atamouse_dev;
+
+static void atamouse_interrupt(char *buf)
+{
+	int buttons, dx, dy;
+
+	buttons = (buf[0] & 1) | ((buf[0] & 2) << 1);
+#ifdef FIXED_ATARI_JOYSTICK
+	buttons |= atari_mouse_buttons & 2;
+	atari_mouse_buttons = buttons;
+#endif
+
+	/* only relative events get here */
+	dx = buf[1];
+	dy = buf[2];
+
+	input_report_rel(atamouse_dev, REL_X, dx);
+	input_report_rel(atamouse_dev, REL_Y, dy);
+
+	input_report_key(atamouse_dev, BTN_LEFT,   buttons & 0x4);
+	input_report_key(atamouse_dev, BTN_MIDDLE, buttons & 0x2);
+	input_report_key(atamouse_dev, BTN_RIGHT,  buttons & 0x1);
+
+	input_sync(atamouse_dev);
+
+	return;
+}
+
+static int atamouse_open(struct input_dev *dev)
+{
+#ifdef FIXED_ATARI_JOYSTICK
+	atari_mouse_buttons = 0;
+#endif
+	ikbd_mouse_y0_top();
+	ikbd_mouse_thresh(mouse_threshold[0], mouse_threshold[1]);
+	ikbd_mouse_rel_pos();
+	atari_input_mouse_interrupt_hook = atamouse_interrupt;
+
+	return 0;
+}
+
+static void atamouse_close(struct input_dev *dev)
+{
+	ikbd_mouse_disable();
+	atari_input_mouse_interrupt_hook = NULL;
+}
+
+static int __init atamouse_init(void)
+{
+	int error;
+
+	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP))
+		return -ENODEV;
+
+	error = atari_keyb_init();
+	if (error)
+		return error;
+
+	atamouse_dev = input_allocate_device();
+	if (!atamouse_dev)
+		return -ENOMEM;
+
+	atamouse_dev->name = "Atari mouse";
+	atamouse_dev->phys = "atamouse/input0";
+	atamouse_dev->id.bustype = BUS_HOST;
+	atamouse_dev->id.vendor = 0x0001;
+	atamouse_dev->id.product = 0x0002;
+	atamouse_dev->id.version = 0x0100;
+
+	atamouse_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+	atamouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+	atamouse_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
+		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+
+	atamouse_dev->open = atamouse_open;
+	atamouse_dev->close = atamouse_close;
+
+	error = input_register_device(atamouse_dev);
+	if (error) {
+		input_free_device(atamouse_dev);
+		return error;
+	}
+
+	return 0;
+}
+
+static void __exit atamouse_exit(void)
+{
+	input_unregister_device(atamouse_dev);
+}
+
+module_init(atamouse_init);
+module_exit(atamouse_exit);