Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 329 insertions, 0 deletions

diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
new file mode 100644
index 000000000..17bbf6cdb
--- /dev/null
+++ b/drivers/input/mouse/alps.h
@@ -0,0 +1,329 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ALPS touchpad PS/2 mouse driver
+ *
+ * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ */
+
+#ifndef _ALPS_H
+#define _ALPS_H
+
+#include <linux/input/mt.h>
+
+#define ALPS_PROTO_V1		0x100
+#define ALPS_PROTO_V2		0x200
+#define ALPS_PROTO_V3		0x300
+#define ALPS_PROTO_V3_RUSHMORE	0x310
+#define ALPS_PROTO_V4		0x400
+#define ALPS_PROTO_V5		0x500
+#define ALPS_PROTO_V6		0x600
+#define ALPS_PROTO_V7		0x700	/* t3btl t4s */
+#define ALPS_PROTO_V8		0x800	/* SS4btl SS4s */
+#define ALPS_PROTO_V9		0x900	/* ss3btl */
+
+#define MAX_TOUCHES	4
+
+#define DOLPHIN_COUNT_PER_ELECTRODE	64
+#define DOLPHIN_PROFILE_XOFFSET		8	/* x-electrode offset */
+#define DOLPHIN_PROFILE_YOFFSET		1	/* y-electrode offset */
+
+/*
+ * enum SS4_PACKET_ID - defines the packet type for V8
+ * SS4_PACKET_ID_IDLE: There's no finger and no button activity.
+ * SS4_PACKET_ID_ONE: There's one finger on touchpad
+ *  or there's button activities.
+ * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad
+ * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad
+ * SS4_PACKET_ID_STICK: A stick pointer packet
+*/
+enum SS4_PACKET_ID {
+	SS4_PACKET_ID_IDLE = 0,
+	SS4_PACKET_ID_ONE,
+	SS4_PACKET_ID_TWO,
+	SS4_PACKET_ID_MULTI,
+	SS4_PACKET_ID_STICK,
+};
+
+#define SS4_COUNT_PER_ELECTRODE		256
+#define SS4_NUMSENSOR_XOFFSET		7
+#define SS4_NUMSENSOR_YOFFSET		7
+#define SS4_MIN_PITCH_MM		50
+
+#define SS4_MASK_NORMAL_BUTTONS		0x07
+
+#define SS4PLUS_COUNT_PER_ELECTRODE	128
+#define SS4PLUS_NUMSENSOR_XOFFSET	16
+#define SS4PLUS_NUMSENSOR_YOFFSET	5
+#define SS4PLUS_MIN_PITCH_MM		37
+
+#define IS_SS4PLUS_DEV(_b)	(((_b[0]) == 0x73) &&	\
+				 ((_b[1]) == 0x03) &&	\
+				 ((_b[2]) == 0x28)		\
+				)
+
+#define SS4_IS_IDLE_V2(_b)	(((_b[0]) == 0x18) &&		\
+				 ((_b[1]) == 0x10) &&		\
+				 ((_b[2]) == 0x00) &&		\
+				 ((_b[3] & 0x88) == 0x08) &&	\
+				 ((_b[4]) == 0x10) &&		\
+				 ((_b[5]) == 0x00)		\
+				)
+
+#define SS4_1F_X_V2(_b)		(((_b[0]) & 0x0007) |		\
+				 ((_b[1] << 3) & 0x0078) |	\
+				 ((_b[1] << 2) & 0x0380) |	\
+				 ((_b[2] << 5) & 0x1C00)	\
+				)
+
+#define SS4_1F_Y_V2(_b)		(((_b[2]) & 0x000F) |		\
+				 ((_b[3] >> 2) & 0x0030) |	\
+				 ((_b[4] << 6) & 0x03C0) |	\
+				 ((_b[4] << 5) & 0x0C00)	\
+				)
+
+#define SS4_1F_Z_V2(_b)		(((_b[5]) & 0x0F) |		\
+				 ((_b[5] >> 1) & 0x70) |	\
+				 ((_b[4]) & 0x80)		\
+				)
+
+#define SS4_1F_LFB_V2(_b)	(((_b[2] >> 4) & 0x01) == 0x01)
+
+#define SS4_MF_LF_V2(_b, _i)	((_b[1 + (_i) * 3] & 0x0004) == 0x0004)
+
+#define SS4_BTN_V2(_b)		((_b[0] >> 5) & SS4_MASK_NORMAL_BUTTONS)
+
+#define SS4_STD_MF_X_V2(_b, _i)	(((_b[0 + (_i) * 3] << 5) & 0x00E0) |	\
+				 ((_b[1 + _i * 3]  << 5) & 0x1F00)	\
+				)
+
+#define SS4_PLUS_STD_MF_X_V2(_b, _i) (((_b[0 + (_i) * 3] << 4) & 0x0070) | \
+				 ((_b[1 + (_i) * 3]  << 4) & 0x0F80)	\
+				)
+
+#define SS4_STD_MF_Y_V2(_b, _i)	(((_b[1 + (_i) * 3] << 3) & 0x0010) |	\
+				 ((_b[2 + (_i) * 3] << 5) & 0x01E0) |	\
+				 ((_b[2 + (_i) * 3] << 4) & 0x0E00)	\
+				)
+
+#define SS4_BTL_MF_X_V2(_b, _i)	(SS4_STD_MF_X_V2(_b, _i) |		\
+				 ((_b[0 + (_i) * 3] >> 3) & 0x0010)	\
+				)
+
+#define SS4_PLUS_BTL_MF_X_V2(_b, _i) (SS4_PLUS_STD_MF_X_V2(_b, _i) |	\
+				 ((_b[0 + (_i) * 3] >> 4) & 0x0008)	\
+				)
+
+#define SS4_BTL_MF_Y_V2(_b, _i)	(SS4_STD_MF_Y_V2(_b, _i) | \
+				 ((_b[0 + (_i) * 3] >> 3) & 0x0008)	\
+				)
+
+#define SS4_MF_Z_V2(_b, _i)	(((_b[1 + (_i) * 3]) & 0x0001) |	\
+				 ((_b[1 + (_i) * 3] >> 1) & 0x0002)	\
+				)
+
+#define SS4_IS_MF_CONTINUE(_b)	((_b[2] & 0x10) == 0x10)
+#define SS4_IS_5F_DETECTED(_b)	((_b[2] & 0x10) == 0x10)
+
+#define SS4_TS_X_V2(_b)		(s8)(				\
+				 ((_b[0] & 0x01) << 7) |	\
+				 (_b[1] & 0x7F)		\
+				)
+
+#define SS4_TS_Y_V2(_b)		-(s8)(				\
+				 ((_b[3] & 0x01) << 7) |	\
+				 (_b[2] & 0x7F)		\
+				)
+
+#define SS4_TS_Z_V2(_b)		(s8)(_b[4] & 0x7F)
+
+
+#define SS4_MFPACKET_NO_AX		8160	/* X-Coordinate value */
+#define SS4_MFPACKET_NO_AY		4080	/* Y-Coordinate value */
+#define SS4_MFPACKET_NO_AX_BL		8176	/* Buttonless X-Coord value */
+#define SS4_MFPACKET_NO_AY_BL		4088	/* Buttonless Y-Coord value */
+#define SS4_PLUS_MFPACKET_NO_AX		4080	/* SS4 PLUS, X */
+#define SS4_PLUS_MFPACKET_NO_AX_BL	4088	/* Buttonless SS4 PLUS, X */
+
+/*
+ * enum V7_PACKET_ID - defines the packet type for V7
+ * V7_PACKET_ID_IDLE: There's no finger and no button activity.
+ * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad
+ *  or there's button activities.
+ * V7_PACKET_ID_MULTI: There are at least three non-resting fingers.
+ * V7_PACKET_ID_NEW: The finger position in slot is not continues from
+ *  previous packet.
+*/
+enum V7_PACKET_ID {
+	 V7_PACKET_ID_IDLE,
+	 V7_PACKET_ID_TWO,
+	 V7_PACKET_ID_MULTI,
+	 V7_PACKET_ID_NEW,
+	 V7_PACKET_ID_UNKNOWN,
+};
+
+/**
+ * struct alps_protocol_info - information about protocol used by a device
+ * @version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ *   known format for this model.  The first byte of the report, ANDed with
+ *   mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ */
+struct alps_protocol_info {
+	u16 version;
+	u8 byte0, mask0;
+	unsigned int flags;
+};
+
+/**
+ * struct alps_model_info - touchpad ID table
+ * @signature: E7 response string to match.
+ * @protocol_info: information about protocol used by the device.
+ *
+ * Many (but not all) ALPS touchpads can be identified by looking at the
+ * values returned in the "E7 report" and/or the "EC report."  This table
+ * lists a number of such touchpads.
+ */
+struct alps_model_info {
+	u8 signature[3];
+	struct alps_protocol_info protocol_info;
+};
+
+/**
+ * struct alps_nibble_commands - encodings for register accesses
+ * @command: PS/2 command used for the nibble
+ * @data: Data supplied as an argument to the PS/2 command, if applicable
+ *
+ * The ALPS protocol uses magic sequences to transmit binary data to the
+ * touchpad, as it is generally not OK to send arbitrary bytes out the
+ * PS/2 port.  Each of the sequences in this table sends one nibble of the
+ * register address or (write) data.  Different versions of the ALPS protocol
+ * use slightly different encodings.
+ */
+struct alps_nibble_commands {
+	int command;
+	unsigned char data;
+};
+
+struct alps_bitmap_point {
+	int start_bit;
+	int num_bits;
+};
+
+/**
+ * struct alps_fields - decoded version of the report packet
+ * @x_map: Bitmap of active X positions for MT.
+ * @y_map: Bitmap of active Y positions for MT.
+ * @fingers: Number of fingers for MT.
+ * @pressure: Pressure.
+ * @st: position for ST.
+ * @mt: position for MT.
+ * @first_mp: Packet is the first of a multi-packet report.
+ * @is_mp: Packet is part of a multi-packet report.
+ * @left: Left touchpad button is active.
+ * @right: Right touchpad button is active.
+ * @middle: Middle touchpad button is active.
+ * @ts_left: Left trackstick button is active.
+ * @ts_right: Right trackstick button is active.
+ * @ts_middle: Middle trackstick button is active.
+ */
+struct alps_fields {
+	unsigned int x_map;
+	unsigned int y_map;
+	unsigned int fingers;
+
+	int pressure;
+	struct input_mt_pos st;
+	struct input_mt_pos mt[MAX_TOUCHES];
+
+	unsigned int first_mp:1;
+	unsigned int is_mp:1;
+
+	unsigned int left:1;
+	unsigned int right:1;
+	unsigned int middle:1;
+
+	unsigned int ts_left:1;
+	unsigned int ts_right:1;
+	unsigned int ts_middle:1;
+};
+
+/**
+ * struct alps_data - private data structure for the ALPS driver
+ * @psmouse: Pointer to parent psmouse device
+ * @dev2: Trackstick device (can be NULL).
+ * @dev3: Generic PS/2 mouse (can be NULL, delayed registering).
+ * @phys2: Physical path for the trackstick device.
+ * @phys3: Physical path for the generic PS/2 mouse.
+ * @dev3_register_work: A work instance for registering PS/2 mouse.
+ * @nibble_commands: Command mapping used for touchpad register accesses.
+ * @addr_command: Command used to tell the touchpad that a register address
+ *   follows.
+ * @proto_version: Indicates V1/V2/V3/...
+ * @byte0: Helps figure out whether a position report packet matches the
+ *   known format for this model.  The first byte of the report, ANDed with
+ *   mask0, should match byte0.
+ * @mask0: The mask used to check the first byte of the report.
+ * @fw_ver: cached copy of firmware version (EC report)
+ * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
+ * @x_max: Largest possible X position value.
+ * @y_max: Largest possible Y position value.
+ * @x_bits: Number of X bits in the MT bitmap.
+ * @y_bits: Number of Y bits in the MT bitmap.
+ * @hw_init: Protocol-specific hardware init function.
+ * @process_packet: Protocol-specific function to process a report packet.
+ * @decode_fields: Protocol-specific function to read packet bitfields.
+ * @set_abs_params: Protocol-specific function to configure the input_dev.
+ * @prev_fin: Finger bit from previous packet.
+ * @multi_packet: Multi-packet data in progress.
+ * @multi_data: Saved multi-packet data.
+ * @f: Decoded packet data fields.
+ * @quirks: Bitmap of ALPS_QUIRK_*.
+ * @timer: Timer for flushing out the final report packet in the stream.
+ */
+struct alps_data {
+	struct psmouse *psmouse;
+	struct input_dev *dev2;
+	struct input_dev *dev3;
+	char phys2[32];
+	char phys3[32];
+	struct work_struct dev3_register_work;
+
+	/* these are autodetected when the device is identified */
+	const struct alps_nibble_commands *nibble_commands;
+	int addr_command;
+	u16 proto_version;
+	u8 byte0, mask0;
+	u8 dev_id[3];
+	u8 fw_ver[3];
+	int flags;
+	int x_max;
+	int y_max;
+	int x_bits;
+	int y_bits;
+	unsigned int x_res;
+	unsigned int y_res;
+
+	int (*hw_init)(struct psmouse *psmouse);
+	void (*process_packet)(struct psmouse *psmouse);
+	int (*decode_fields)(struct alps_fields *f, unsigned char *p,
+			      struct psmouse *psmouse);
+	void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1);
+
+	int prev_fin;
+	int multi_packet;
+	int second_touch;
+	unsigned char multi_data[6];
+	struct alps_fields f;
+	u8 quirks;
+	struct timer_list timer;
+};
+
+#define ALPS_QUIRK_TRACKSTICK_BUTTONS	1 /* trakcstick buttons in trackstick packet */
+
+int alps_detect(struct psmouse *psmouse, bool set_properties);
+int alps_init(struct psmouse *psmouse);
+
+#endif