iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 41 insertions, 0 deletions

diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
new file mode 100644
index 000000000..ed40f1416
--- /dev/null
+++ b/drivers/input/mouse/Makefile
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the mouse drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_MOUSE_AMIGA)		+= amimouse.o
+obj-$(CONFIG_MOUSE_APPLETOUCH)		+= appletouch.o
+obj-$(CONFIG_MOUSE_ATARI)		+= atarimouse.o
+obj-$(CONFIG_MOUSE_BCM5974)		+= bcm5974.o
+obj-$(CONFIG_MOUSE_CYAPA)		+= cyapatp.o
+obj-$(CONFIG_MOUSE_ELAN_I2C)		+= elan_i2c.o
+obj-$(CONFIG_MOUSE_GPIO)		+= gpio_mouse.o
+obj-$(CONFIG_MOUSE_MAPLE)		+= maplemouse.o
+obj-$(CONFIG_MOUSE_PS2)			+= psmouse.o
+obj-$(CONFIG_MOUSE_RISCPC)		+= rpcmouse.o
+obj-$(CONFIG_MOUSE_SERIAL)		+= sermouse.o
+obj-$(CONFIG_MOUSE_SYNAPTICS_I2C)	+= synaptics_i2c.o
+obj-$(CONFIG_MOUSE_SYNAPTICS_USB)	+= synaptics_usb.o
+obj-$(CONFIG_MOUSE_VSXXXAA)		+= vsxxxaa.o
+
+cyapatp-objs := cyapa.o cyapa_gen3.o cyapa_gen5.o cyapa_gen6.o
+psmouse-objs := psmouse-base.o synaptics.o focaltech.o
+
+psmouse-$(CONFIG_MOUSE_PS2_ALPS)	+= alps.o
+psmouse-$(CONFIG_MOUSE_PS2_BYD)		+= byd.o
+psmouse-$(CONFIG_MOUSE_PS2_ELANTECH)	+= elantech.o
+psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP)	+= logips2pp.o
+psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK)	+= lifebook.o
+psmouse-$(CONFIG_MOUSE_PS2_SENTELIC)	+= sentelic.o
+psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT)	+= trackpoint.o
+psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT)	+= touchkit_ps2.o
+psmouse-$(CONFIG_MOUSE_PS2_CYPRESS)	+= cypress_ps2.o
+psmouse-$(CONFIG_MOUSE_PS2_VMMOUSE)	+= vmmouse.o
+
+psmouse-$(CONFIG_MOUSE_PS2_SMBUS)	+= psmouse-smbus.o
+
+elan_i2c-objs := elan_i2c_core.o
+elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_I2C)	+= elan_i2c_i2c.o
+elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_SMBUS)	+= elan_i2c_smbus.o