Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 169 insertions, 0 deletions

diff --git a/drivers/input/misc/ariel-pwrbutton.c b/drivers/input/misc/ariel-pwrbutton.c
new file mode 100644
index 000000000..f0e06ee60
--- /dev/null
+++ b/drivers/input/misc/ariel-pwrbutton.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0-or-later
+/*
+ * Dell Wyse 3020 a.k.a. "Ariel" Power Button Driver
+ *
+ * Copyright (C) 2020 Lubomir Rintel
+ */
+
+#include <linux/device.h>
+#include <linux/gfp.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#define RESP_COUNTER(response)	(response.header & 0x3)
+#define RESP_SIZE(response)	((response.header >> 2) & 0x3)
+#define RESP_TYPE(response)	((response.header >> 4) & 0xf)
+
+struct ec_input_response {
+	u8 reserved;
+	u8 header;
+	u8 data[3];
+} __packed;
+
+struct ariel_pwrbutton {
+	struct spi_device *client;
+	struct input_dev *input;
+	u8 msg_counter;
+};
+
+static int ec_input_read(struct ariel_pwrbutton *priv,
+			 struct ec_input_response *response)
+{
+	u8 read_request[] = { 0x00, 0x5a, 0xa5, 0x00, 0x00 };
+	struct spi_device *spi = priv->client;
+	struct spi_transfer t = {
+		.tx_buf = read_request,
+		.rx_buf = response,
+		.len = sizeof(read_request),
+	};
+
+	compiletime_assert(sizeof(read_request) == sizeof(*response),
+			   "SPI xfer request/response size mismatch");
+
+	return spi_sync_transfer(spi, &t, 1);
+}
+
+static irqreturn_t ec_input_interrupt(int irq, void *dev_id)
+{
+	struct ariel_pwrbutton *priv = dev_id;
+	struct spi_device *spi = priv->client;
+	struct ec_input_response response;
+	int error;
+	int i;
+
+	error = ec_input_read(priv, &response);
+	if (error < 0) {
+		dev_err(&spi->dev, "EC read failed: %d\n", error);
+		goto out;
+	}
+
+	if (priv->msg_counter == RESP_COUNTER(response)) {
+		dev_warn(&spi->dev, "No new data to read?\n");
+		goto out;
+	}
+
+	priv->msg_counter = RESP_COUNTER(response);
+
+	if (RESP_TYPE(response) != 0x3 && RESP_TYPE(response) != 0xc) {
+		dev_dbg(&spi->dev, "Ignoring message that's not kbd data\n");
+		goto out;
+	}
+
+	for (i = 0; i < RESP_SIZE(response); i++) {
+		switch (response.data[i]) {
+		case 0x74:
+			input_report_key(priv->input, KEY_POWER, 1);
+			input_sync(priv->input);
+			break;
+		case 0xf4:
+			input_report_key(priv->input, KEY_POWER, 0);
+			input_sync(priv->input);
+			break;
+		default:
+			dev_dbg(&spi->dev, "Unknown scan code: %02x\n",
+				response.data[i]);
+		}
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int ariel_pwrbutton_probe(struct spi_device *spi)
+{
+	struct ec_input_response response;
+	struct ariel_pwrbutton *priv;
+	int error;
+
+	if (!spi->irq) {
+		dev_err(&spi->dev, "Missing IRQ.\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = spi;
+	spi_set_drvdata(spi, priv);
+
+	priv->input = devm_input_allocate_device(&spi->dev);
+	if (!priv->input)
+		return -ENOMEM;
+	priv->input->name = "Power Button";
+	priv->input->dev.parent = &spi->dev;
+	input_set_capability(priv->input, EV_KEY, KEY_POWER);
+	error = input_register_device(priv->input);
+	if (error) {
+		dev_err(&spi->dev, "error registering input device: %d\n", error);
+		return error;
+	}
+
+	error = ec_input_read(priv, &response);
+	if (error < 0) {
+		dev_err(&spi->dev, "EC read failed: %d\n", error);
+		return error;
+	}
+	priv->msg_counter = RESP_COUNTER(response);
+
+	error = devm_request_threaded_irq(&spi->dev, spi->irq, NULL,
+					  ec_input_interrupt,
+					  IRQF_ONESHOT,
+					  "Ariel EC Input", priv);
+
+	if (error) {
+		dev_err(&spi->dev, "Failed to request IRQ %d: %d\n",
+			spi->irq, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id ariel_pwrbutton_of_match[] = {
+	{ .compatible = "dell,wyse-ariel-ec-input" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ariel_pwrbutton_of_match);
+
+static const struct spi_device_id ariel_pwrbutton_spi_ids[] = {
+	{ .name = "wyse-ariel-ec-input" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ariel_pwrbutton_spi_ids);
+
+static struct spi_driver ariel_pwrbutton_driver = {
+	.driver = {
+		.name = "dell-wyse-ariel-ec-input",
+		.of_match_table = ariel_pwrbutton_of_match,
+	},
+	.probe = ariel_pwrbutton_probe,
+	.id_table = ariel_pwrbutton_spi_ids,
+};
+module_spi_driver(ariel_pwrbutton_driver);
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
+MODULE_DESCRIPTION("Dell Wyse 3020 Power Button Input Driver");
+MODULE_LICENSE("Dual BSD/GPL");