iio: proximity: isl29501: Fix return type of isl29501_register_writegrafted

isl29501_register_write() was returning a u32 instead of an int.
Since the function returns negative error codes (such as -ERANGE or
return values from i2c_smbus_write_byte_data()), returning an unsigned
integer type prevents callers from correctly checking for negative error
conditions.

Fix this by changing the function return type from u32 to int.

This was found through manual code review.

Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 169 insertions, 0 deletions

diff --git a/drivers/input/misc/ariel-pwrbutton.c b/drivers/input/misc/ariel-pwrbutton.c
new file mode 100644
index 000000000..f0e06ee60
--- /dev/null
+++ b/drivers/input/misc/ariel-pwrbutton.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0-or-later
+/*
+ * Dell Wyse 3020 a.k.a. "Ariel" Power Button Driver
+ *
+ * Copyright (C) 2020 Lubomir Rintel
+ */
+
+#include <linux/device.h>
+#include <linux/gfp.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#define RESP_COUNTER(response)	(response.header & 0x3)
+#define RESP_SIZE(response)	((response.header >> 2) & 0x3)
+#define RESP_TYPE(response)	((response.header >> 4) & 0xf)
+
+struct ec_input_response {
+	u8 reserved;
+	u8 header;
+	u8 data[3];
+} __packed;
+
+struct ariel_pwrbutton {
+	struct spi_device *client;
+	struct input_dev *input;
+	u8 msg_counter;
+};
+
+static int ec_input_read(struct ariel_pwrbutton *priv,
+			 struct ec_input_response *response)
+{
+	u8 read_request[] = { 0x00, 0x5a, 0xa5, 0x00, 0x00 };
+	struct spi_device *spi = priv->client;
+	struct spi_transfer t = {
+		.tx_buf = read_request,
+		.rx_buf = response,
+		.len = sizeof(read_request),
+	};
+
+	compiletime_assert(sizeof(read_request) == sizeof(*response),
+			   "SPI xfer request/response size mismatch");
+
+	return spi_sync_transfer(spi, &t, 1);
+}
+
+static irqreturn_t ec_input_interrupt(int irq, void *dev_id)
+{
+	struct ariel_pwrbutton *priv = dev_id;
+	struct spi_device *spi = priv->client;
+	struct ec_input_response response;
+	int error;
+	int i;
+
+	error = ec_input_read(priv, &response);
+	if (error < 0) {
+		dev_err(&spi->dev, "EC read failed: %d\n", error);
+		goto out;
+	}
+
+	if (priv->msg_counter == RESP_COUNTER(response)) {
+		dev_warn(&spi->dev, "No new data to read?\n");
+		goto out;
+	}
+
+	priv->msg_counter = RESP_COUNTER(response);
+
+	if (RESP_TYPE(response) != 0x3 && RESP_TYPE(response) != 0xc) {
+		dev_dbg(&spi->dev, "Ignoring message that's not kbd data\n");
+		goto out;
+	}
+
+	for (i = 0; i < RESP_SIZE(response); i++) {
+		switch (response.data[i]) {
+		case 0x74:
+			input_report_key(priv->input, KEY_POWER, 1);
+			input_sync(priv->input);
+			break;
+		case 0xf4:
+			input_report_key(priv->input, KEY_POWER, 0);
+			input_sync(priv->input);
+			break;
+		default:
+			dev_dbg(&spi->dev, "Unknown scan code: %02x\n",
+				response.data[i]);
+		}
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int ariel_pwrbutton_probe(struct spi_device *spi)
+{
+	struct ec_input_response response;
+	struct ariel_pwrbutton *priv;
+	int error;
+
+	if (!spi->irq) {
+		dev_err(&spi->dev, "Missing IRQ.\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = spi;
+	spi_set_drvdata(spi, priv);
+
+	priv->input = devm_input_allocate_device(&spi->dev);
+	if (!priv->input)
+		return -ENOMEM;
+	priv->input->name = "Power Button";
+	priv->input->dev.parent = &spi->dev;
+	input_set_capability(priv->input, EV_KEY, KEY_POWER);
+	error = input_register_device(priv->input);
+	if (error) {
+		dev_err(&spi->dev, "error registering input device: %d\n", error);
+		return error;
+	}
+
+	error = ec_input_read(priv, &response);
+	if (error < 0) {
+		dev_err(&spi->dev, "EC read failed: %d\n", error);
+		return error;
+	}
+	priv->msg_counter = RESP_COUNTER(response);
+
+	error = devm_request_threaded_irq(&spi->dev, spi->irq, NULL,
+					  ec_input_interrupt,
+					  IRQF_ONESHOT,
+					  "Ariel EC Input", priv);
+
+	if (error) {
+		dev_err(&spi->dev, "Failed to request IRQ %d: %d\n",
+			spi->irq, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id ariel_pwrbutton_of_match[] = {
+	{ .compatible = "dell,wyse-ariel-ec-input" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ariel_pwrbutton_of_match);
+
+static const struct spi_device_id ariel_pwrbutton_spi_ids[] = {
+	{ .name = "wyse-ariel-ec-input" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ariel_pwrbutton_spi_ids);
+
+static struct spi_driver ariel_pwrbutton_driver = {
+	.driver = {
+		.name = "dell-wyse-ariel-ec-input",
+		.of_match_table = ariel_pwrbutton_of_match,
+	},
+	.probe = ariel_pwrbutton_probe,
+	.id_table = ariel_pwrbutton_spi_ids,
+};
+module_spi_driver(ariel_pwrbutton_driver);
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
+MODULE_DESCRIPTION("Dell Wyse 3020 Power Button Input Driver");
+MODULE_LICENSE("Dual BSD/GPL");