Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 390 insertions, 0 deletions

diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
new file mode 100644
index 000000000..c8d8d0ea3
--- /dev/null
+++ b/drivers/input/keyboard/hilkbd.c
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/drivers/hil/hilkbd.c
+ *
+ *  Copyright (C) 1998 Philip Blundell <philb@gnu.org>
+ *  Copyright (C) 1999 Matthew Wilcox <willy@infradead.org>
+ *  Copyright (C) 1999-2007 Helge Deller <deller@gmx.de>
+ *
+ *  Very basic HP Human Interface Loop (HIL) driver.
+ *  This driver handles the keyboard on HP300 (m68k) and on some
+ *  HP700 (parisc) series machines.
+ */
+
+#include <linux/pci_ids.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hil.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#ifdef CONFIG_HP300
+#include <asm/hwtest.h>
+#endif
+
+
+MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller");
+MODULE_DESCRIPTION("HIL keyboard driver (basic functionality)");
+MODULE_LICENSE("GPL v2");
+
+
+#if defined(CONFIG_PARISC)
+
+ #include <asm/io.h>
+ #include <asm/hardware.h>
+ #include <asm/parisc-device.h>
+ static unsigned long hil_base;	/* HPA for the HIL device */
+ static unsigned int hil_irq;
+ #define HILBASE		hil_base /* HPPA (parisc) port address */
+ #define HIL_DATA		0x800
+ #define HIL_CMD		0x801
+ #define HIL_IRQ		hil_irq
+ #define hil_readb(p)		gsc_readb(p)
+ #define hil_writeb(v,p)	gsc_writeb((v),(p))
+
+#elif defined(CONFIG_HP300)
+
+ #define HILBASE		0xf0428000UL /* HP300 (m68k) port address */
+ #define HIL_DATA		0x1
+ #define HIL_CMD		0x3
+ #define HIL_IRQ		2
+ #define hil_readb(p)		readb((const volatile void __iomem *)(p))
+ #define hil_writeb(v, p)	writeb((v), (volatile void __iomem *)(p))
+
+#else
+#error "HIL is not supported on this platform"
+#endif
+
+
+
+/* HIL helper functions */
+
+#define hil_busy()              (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY)
+#define hil_data_available()    (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY)
+#define hil_status()            (hil_readb(HILBASE + HIL_CMD))
+#define hil_command(x)          do { hil_writeb((x), HILBASE + HIL_CMD); } while (0)
+#define hil_read_data()         (hil_readb(HILBASE + HIL_DATA))
+#define hil_write_data(x)       do { hil_writeb((x), HILBASE + HIL_DATA); } while (0)
+
+/* HIL constants */
+
+#define	HIL_BUSY		0x02
+#define	HIL_DATA_RDY		0x01
+
+#define	HIL_SETARD		0xA0		/* set auto-repeat delay */
+#define	HIL_SETARR		0xA2		/* set auto-repeat rate */
+#define	HIL_SETTONE		0xA3		/* set tone generator */
+#define	HIL_CNMT		0xB2		/* clear nmi */
+#define	HIL_INTON		0x5C		/* Turn on interrupts. */
+#define	HIL_INTOFF		0x5D		/* Turn off interrupts. */
+
+#define	HIL_READKBDSADR		0xF9
+#define	HIL_WRITEKBDSADR	0xE9
+
+static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly =
+	{ HIL_KEYCODES_SET1 };
+
+/* HIL structure */
+static struct {
+	struct input_dev *dev;
+
+	unsigned int curdev;
+
+	unsigned char s;
+	unsigned char c;
+	int valid;
+
+	unsigned char data[16];
+	unsigned int ptr;
+	spinlock_t lock;
+
+	void *dev_id;	/* native bus device */
+} hil_dev;
+
+
+static void poll_finished(void)
+{
+	int down;
+	int key;
+	unsigned char scode;
+
+	switch (hil_dev.data[0]) {
+	case 0x40:
+		down = (hil_dev.data[1] & 1) == 0;
+		scode = hil_dev.data[1] >> 1;
+		key = hphilkeyb_keycode[scode];
+		input_report_key(hil_dev.dev, key, down);
+		break;
+	}
+	hil_dev.curdev = 0;
+}
+
+
+static inline void handle_status(unsigned char s, unsigned char c)
+{
+	if (c & 0x8) {
+		/* End of block */
+		if (c & 0x10)
+			poll_finished();
+	} else {
+		if (c & 0x10) {
+			if (hil_dev.curdev)
+				poll_finished();  /* just in case */
+			hil_dev.curdev = c & 7;
+			hil_dev.ptr = 0;
+		}
+	}
+}
+
+
+static inline void handle_data(unsigned char s, unsigned char c)
+{
+	if (hil_dev.curdev) {
+		hil_dev.data[hil_dev.ptr++] = c;
+		hil_dev.ptr &= 15;
+	}
+}
+
+
+/* handle HIL interrupts */
+static irqreturn_t hil_interrupt(int irq, void *handle)
+{
+	unsigned char s, c;
+
+	s = hil_status();
+	c = hil_read_data();
+
+	switch (s >> 4) {
+	case 0x5:
+		handle_status(s, c);
+		break;
+	case 0x6:
+		handle_data(s, c);
+		break;
+	case 0x4:
+		hil_dev.s = s;
+		hil_dev.c = c;
+		mb();
+		hil_dev.valid = 1;
+		break;
+	}
+	return IRQ_HANDLED;
+}
+
+
+/* send a command to the HIL */
+static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len)
+{
+	guard(spinlock_irqsave)(&hil_dev.lock);
+
+	while (hil_busy())
+		/* wait */;
+	hil_command(cmd);
+	while (len--) {
+		while (hil_busy())
+			/* wait */;
+		hil_write_data(*(data++));
+	}
+}
+
+
+/* initialize HIL */
+static int hil_keyb_init(void)
+{
+	unsigned char c;
+	unsigned int i, kbid;
+	wait_queue_head_t hil_wait;
+	int err;
+
+	if (hil_dev.dev)
+		return -ENODEV; /* already initialized */
+
+	init_waitqueue_head(&hil_wait);
+	spin_lock_init(&hil_dev.lock);
+
+	hil_dev.dev = input_allocate_device();
+	if (!hil_dev.dev)
+		return -ENOMEM;
+
+	err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id);
+	if (err) {
+		printk(KERN_ERR "HIL: Can't get IRQ\n");
+		goto err1;
+	}
+
+	/* Turn on interrupts */
+	hil_do(HIL_INTON, NULL, 0);
+
+	/* Look for keyboards */
+	hil_dev.valid = 0;	/* clear any pending data */
+	hil_do(HIL_READKBDSADR, NULL, 0);
+
+	wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ);
+	if (!hil_dev.valid)
+		printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");
+
+	c = hil_dev.c;
+	hil_dev.valid = 0;
+	if (c == 0) {
+		kbid = -1;
+		printk(KERN_WARNING "HIL: no keyboard present\n");
+	} else {
+		kbid = ffz(~c);
+		printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid);
+	}
+
+	/* set it to raw mode */
+	c = 0;
+	hil_do(HIL_WRITEKBDSADR, &c, 1);
+
+	for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
+		if (hphilkeyb_keycode[i] != KEY_RESERVED)
+			__set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
+
+	hil_dev.dev->evbit[0]	= BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	hil_dev.dev->ledbit[0]	= BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
+		BIT_MASK(LED_SCROLLL);
+	hil_dev.dev->keycodemax	= HIL_KEYCODES_SET1_TBLSIZE;
+	hil_dev.dev->keycodesize= sizeof(hphilkeyb_keycode[0]);
+	hil_dev.dev->keycode	= hphilkeyb_keycode;
+	hil_dev.dev->name	= "HIL keyboard";
+	hil_dev.dev->phys	= "hpkbd/input0";
+
+	hil_dev.dev->id.bustype	= BUS_HIL;
+	hil_dev.dev->id.vendor	= PCI_VENDOR_ID_HP;
+	hil_dev.dev->id.product	= 0x0001;
+	hil_dev.dev->id.version	= 0x0010;
+
+	err = input_register_device(hil_dev.dev);
+	if (err) {
+		printk(KERN_ERR "HIL: Can't register device\n");
+		goto err2;
+	}
+
+	printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
+	       hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
+
+	return 0;
+
+err2:
+	hil_do(HIL_INTOFF, NULL, 0);
+	free_irq(HIL_IRQ, hil_dev.dev_id);
+err1:
+	input_free_device(hil_dev.dev);
+	hil_dev.dev = NULL;
+	return err;
+}
+
+static void hil_keyb_exit(void)
+{
+	if (HIL_IRQ)
+		free_irq(HIL_IRQ, hil_dev.dev_id);
+
+	/* Turn off interrupts */
+	hil_do(HIL_INTOFF, NULL, 0);
+
+	input_unregister_device(hil_dev.dev);
+	hil_dev.dev = NULL;
+}
+
+#if defined(CONFIG_PARISC)
+static int __init hil_probe_chip(struct parisc_device *dev)
+{
+	/* Only allow one HIL keyboard */
+	if (hil_dev.dev)
+		return -ENODEV;
+
+	if (!dev->irq) {
+		printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n",
+			(void *)dev->hpa.start);
+		return -ENODEV;
+	}
+
+	hil_base = dev->hpa.start;
+	hil_irq  = dev->irq;
+	hil_dev.dev_id = dev;
+
+	printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq);
+
+	return hil_keyb_init();
+}
+
+static void __exit hil_remove_chip(struct parisc_device *dev)
+{
+	hil_keyb_exit();
+}
+
+static const struct parisc_device_id hil_tbl[] __initconst = {
+	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 },
+	{ 0, }
+};
+
+#if 0
+/* Disabled to avoid conflicts with the HP SDC HIL drivers */
+MODULE_DEVICE_TABLE(parisc, hil_tbl);
+#endif
+
+static struct parisc_driver hil_driver __refdata = {
+	.name		= "hil",
+	.id_table	= hil_tbl,
+	.probe		= hil_probe_chip,
+	.remove		= __exit_p(hil_remove_chip),
+};
+
+static int __init hil_init(void)
+{
+	return register_parisc_driver(&hil_driver);
+}
+
+static void __exit hil_exit(void)
+{
+	unregister_parisc_driver(&hil_driver);
+}
+
+#else /* !CONFIG_PARISC */
+
+static int __init hil_init(void)
+{
+	int error;
+
+	/* Only allow one HIL keyboard */
+	if (hil_dev.dev)
+		return -EBUSY;
+
+	if (!MACH_IS_HP300)
+		return -ENODEV;
+
+	if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
+		printk(KERN_ERR "HIL: hardware register was not found\n");
+		return -ENODEV;
+	}
+
+	if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
+		printk(KERN_ERR "HIL: IOPORT region already used\n");
+		return -EIO;
+	}
+
+	error = hil_keyb_init();
+	if (error) {
+		release_region(HILBASE + HIL_DATA, 2);
+		return error;
+	}
+
+	return 0;
+}
+
+static void __exit hil_exit(void)
+{
+	hil_keyb_exit();
+	release_region(HILBASE + HIL_DATA, 2);
+}
+
+#endif /* CONFIG_PARISC */
+
+module_init(hil_init);
+module_exit(hil_exit);