scftorture: Count single_rpc offline failures in statistics outputgrafted

scf_torture_stats_print() aggregates each invoker thread's counters
into a local scf_statistics structure before printing, but the
n_single_rpc_ofl field is missing from the aggregation loop.  As a
result, the "single_rpc_ofl" value printed in the statistics line is
always zero, even when smp_call_function_single() invocations for the
RPC test have failed due to offline CPUs and been counted by the
invoker threads.

Add the missing accumulation so that the printed value reflects the
actual counts.

Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

1 files changed, 390 insertions, 0 deletions

diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
new file mode 100644
index 000000000..c8d8d0ea3
--- /dev/null
+++ b/drivers/input/keyboard/hilkbd.c
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/drivers/hil/hilkbd.c
+ *
+ *  Copyright (C) 1998 Philip Blundell <philb@gnu.org>
+ *  Copyright (C) 1999 Matthew Wilcox <willy@infradead.org>
+ *  Copyright (C) 1999-2007 Helge Deller <deller@gmx.de>
+ *
+ *  Very basic HP Human Interface Loop (HIL) driver.
+ *  This driver handles the keyboard on HP300 (m68k) and on some
+ *  HP700 (parisc) series machines.
+ */
+
+#include <linux/pci_ids.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/hil.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#ifdef CONFIG_HP300
+#include <asm/hwtest.h>
+#endif
+
+
+MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller");
+MODULE_DESCRIPTION("HIL keyboard driver (basic functionality)");
+MODULE_LICENSE("GPL v2");
+
+
+#if defined(CONFIG_PARISC)
+
+ #include <asm/io.h>
+ #include <asm/hardware.h>
+ #include <asm/parisc-device.h>
+ static unsigned long hil_base;	/* HPA for the HIL device */
+ static unsigned int hil_irq;
+ #define HILBASE		hil_base /* HPPA (parisc) port address */
+ #define HIL_DATA		0x800
+ #define HIL_CMD		0x801
+ #define HIL_IRQ		hil_irq
+ #define hil_readb(p)		gsc_readb(p)
+ #define hil_writeb(v,p)	gsc_writeb((v),(p))
+
+#elif defined(CONFIG_HP300)
+
+ #define HILBASE		0xf0428000UL /* HP300 (m68k) port address */
+ #define HIL_DATA		0x1
+ #define HIL_CMD		0x3
+ #define HIL_IRQ		2
+ #define hil_readb(p)		readb((const volatile void __iomem *)(p))
+ #define hil_writeb(v, p)	writeb((v), (volatile void __iomem *)(p))
+
+#else
+#error "HIL is not supported on this platform"
+#endif
+
+
+
+/* HIL helper functions */
+
+#define hil_busy()              (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY)
+#define hil_data_available()    (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY)
+#define hil_status()            (hil_readb(HILBASE + HIL_CMD))
+#define hil_command(x)          do { hil_writeb((x), HILBASE + HIL_CMD); } while (0)
+#define hil_read_data()         (hil_readb(HILBASE + HIL_DATA))
+#define hil_write_data(x)       do { hil_writeb((x), HILBASE + HIL_DATA); } while (0)
+
+/* HIL constants */
+
+#define	HIL_BUSY		0x02
+#define	HIL_DATA_RDY		0x01
+
+#define	HIL_SETARD		0xA0		/* set auto-repeat delay */
+#define	HIL_SETARR		0xA2		/* set auto-repeat rate */
+#define	HIL_SETTONE		0xA3		/* set tone generator */
+#define	HIL_CNMT		0xB2		/* clear nmi */
+#define	HIL_INTON		0x5C		/* Turn on interrupts. */
+#define	HIL_INTOFF		0x5D		/* Turn off interrupts. */
+
+#define	HIL_READKBDSADR		0xF9
+#define	HIL_WRITEKBDSADR	0xE9
+
+static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly =
+	{ HIL_KEYCODES_SET1 };
+
+/* HIL structure */
+static struct {
+	struct input_dev *dev;
+
+	unsigned int curdev;
+
+	unsigned char s;
+	unsigned char c;
+	int valid;
+
+	unsigned char data[16];
+	unsigned int ptr;
+	spinlock_t lock;
+
+	void *dev_id;	/* native bus device */
+} hil_dev;
+
+
+static void poll_finished(void)
+{
+	int down;
+	int key;
+	unsigned char scode;
+
+	switch (hil_dev.data[0]) {
+	case 0x40:
+		down = (hil_dev.data[1] & 1) == 0;
+		scode = hil_dev.data[1] >> 1;
+		key = hphilkeyb_keycode[scode];
+		input_report_key(hil_dev.dev, key, down);
+		break;
+	}
+	hil_dev.curdev = 0;
+}
+
+
+static inline void handle_status(unsigned char s, unsigned char c)
+{
+	if (c & 0x8) {
+		/* End of block */
+		if (c & 0x10)
+			poll_finished();
+	} else {
+		if (c & 0x10) {
+			if (hil_dev.curdev)
+				poll_finished();  /* just in case */
+			hil_dev.curdev = c & 7;
+			hil_dev.ptr = 0;
+		}
+	}
+}
+
+
+static inline void handle_data(unsigned char s, unsigned char c)
+{
+	if (hil_dev.curdev) {
+		hil_dev.data[hil_dev.ptr++] = c;
+		hil_dev.ptr &= 15;
+	}
+}
+
+
+/* handle HIL interrupts */
+static irqreturn_t hil_interrupt(int irq, void *handle)
+{
+	unsigned char s, c;
+
+	s = hil_status();
+	c = hil_read_data();
+
+	switch (s >> 4) {
+	case 0x5:
+		handle_status(s, c);
+		break;
+	case 0x6:
+		handle_data(s, c);
+		break;
+	case 0x4:
+		hil_dev.s = s;
+		hil_dev.c = c;
+		mb();
+		hil_dev.valid = 1;
+		break;
+	}
+	return IRQ_HANDLED;
+}
+
+
+/* send a command to the HIL */
+static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len)
+{
+	guard(spinlock_irqsave)(&hil_dev.lock);
+
+	while (hil_busy())
+		/* wait */;
+	hil_command(cmd);
+	while (len--) {
+		while (hil_busy())
+			/* wait */;
+		hil_write_data(*(data++));
+	}
+}
+
+
+/* initialize HIL */
+static int hil_keyb_init(void)
+{
+	unsigned char c;
+	unsigned int i, kbid;
+	wait_queue_head_t hil_wait;
+	int err;
+
+	if (hil_dev.dev)
+		return -ENODEV; /* already initialized */
+
+	init_waitqueue_head(&hil_wait);
+	spin_lock_init(&hil_dev.lock);
+
+	hil_dev.dev = input_allocate_device();
+	if (!hil_dev.dev)
+		return -ENOMEM;
+
+	err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id);
+	if (err) {
+		printk(KERN_ERR "HIL: Can't get IRQ\n");
+		goto err1;
+	}
+
+	/* Turn on interrupts */
+	hil_do(HIL_INTON, NULL, 0);
+
+	/* Look for keyboards */
+	hil_dev.valid = 0;	/* clear any pending data */
+	hil_do(HIL_READKBDSADR, NULL, 0);
+
+	wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ);
+	if (!hil_dev.valid)
+		printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");
+
+	c = hil_dev.c;
+	hil_dev.valid = 0;
+	if (c == 0) {
+		kbid = -1;
+		printk(KERN_WARNING "HIL: no keyboard present\n");
+	} else {
+		kbid = ffz(~c);
+		printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid);
+	}
+
+	/* set it to raw mode */
+	c = 0;
+	hil_do(HIL_WRITEKBDSADR, &c, 1);
+
+	for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
+		if (hphilkeyb_keycode[i] != KEY_RESERVED)
+			__set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
+
+	hil_dev.dev->evbit[0]	= BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	hil_dev.dev->ledbit[0]	= BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
+		BIT_MASK(LED_SCROLLL);
+	hil_dev.dev->keycodemax	= HIL_KEYCODES_SET1_TBLSIZE;
+	hil_dev.dev->keycodesize= sizeof(hphilkeyb_keycode[0]);
+	hil_dev.dev->keycode	= hphilkeyb_keycode;
+	hil_dev.dev->name	= "HIL keyboard";
+	hil_dev.dev->phys	= "hpkbd/input0";
+
+	hil_dev.dev->id.bustype	= BUS_HIL;
+	hil_dev.dev->id.vendor	= PCI_VENDOR_ID_HP;
+	hil_dev.dev->id.product	= 0x0001;
+	hil_dev.dev->id.version	= 0x0010;
+
+	err = input_register_device(hil_dev.dev);
+	if (err) {
+		printk(KERN_ERR "HIL: Can't register device\n");
+		goto err2;
+	}
+
+	printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
+	       hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
+
+	return 0;
+
+err2:
+	hil_do(HIL_INTOFF, NULL, 0);
+	free_irq(HIL_IRQ, hil_dev.dev_id);
+err1:
+	input_free_device(hil_dev.dev);
+	hil_dev.dev = NULL;
+	return err;
+}
+
+static void hil_keyb_exit(void)
+{
+	if (HIL_IRQ)
+		free_irq(HIL_IRQ, hil_dev.dev_id);
+
+	/* Turn off interrupts */
+	hil_do(HIL_INTOFF, NULL, 0);
+
+	input_unregister_device(hil_dev.dev);
+	hil_dev.dev = NULL;
+}
+
+#if defined(CONFIG_PARISC)
+static int __init hil_probe_chip(struct parisc_device *dev)
+{
+	/* Only allow one HIL keyboard */
+	if (hil_dev.dev)
+		return -ENODEV;
+
+	if (!dev->irq) {
+		printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n",
+			(void *)dev->hpa.start);
+		return -ENODEV;
+	}
+
+	hil_base = dev->hpa.start;
+	hil_irq  = dev->irq;
+	hil_dev.dev_id = dev;
+
+	printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq);
+
+	return hil_keyb_init();
+}
+
+static void __exit hil_remove_chip(struct parisc_device *dev)
+{
+	hil_keyb_exit();
+}
+
+static const struct parisc_device_id hil_tbl[] __initconst = {
+	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 },
+	{ 0, }
+};
+
+#if 0
+/* Disabled to avoid conflicts with the HP SDC HIL drivers */
+MODULE_DEVICE_TABLE(parisc, hil_tbl);
+#endif
+
+static struct parisc_driver hil_driver __refdata = {
+	.name		= "hil",
+	.id_table	= hil_tbl,
+	.probe		= hil_probe_chip,
+	.remove		= __exit_p(hil_remove_chip),
+};
+
+static int __init hil_init(void)
+{
+	return register_parisc_driver(&hil_driver);
+}
+
+static void __exit hil_exit(void)
+{
+	unregister_parisc_driver(&hil_driver);
+}
+
+#else /* !CONFIG_PARISC */
+
+static int __init hil_init(void)
+{
+	int error;
+
+	/* Only allow one HIL keyboard */
+	if (hil_dev.dev)
+		return -EBUSY;
+
+	if (!MACH_IS_HP300)
+		return -ENODEV;
+
+	if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
+		printk(KERN_ERR "HIL: hardware register was not found\n");
+		return -ENODEV;
+	}
+
+	if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
+		printk(KERN_ERR "HIL: IOPORT region already used\n");
+		return -EIO;
+	}
+
+	error = hil_keyb_init();
+	if (error) {
+		release_region(HILBASE + HIL_DATA, 2);
+		return error;
+	}
+
+	return 0;
+}
+
+static void __exit hil_exit(void)
+{
+	hil_keyb_exit();
+	release_region(HILBASE + HIL_DATA, 2);
+}
+
+#endif /* CONFIG_PARISC */
+
+module_init(hil_init);
+module_exit(hil_exit);