Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 204 insertions, 0 deletions

diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
new file mode 100644
index 000000000..88ecdf521
--- /dev/null
+++ b/drivers/input/Kconfig
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Input device configuration
+#
+
+menu "Input device support"
+
+config INPUT
+	tristate "Generic input layer (needed for keyboard, mouse, ...)" if EXPERT
+	default y
+	help
+	  Say Y here if you have any input device (mouse, keyboard, tablet,
+	  joystick, steering wheel ...) connected to your system and want
+	  it to be available to applications. This includes standard PS/2
+	  keyboard and mouse.
+
+	  Say N here if you have a headless (no monitor, no keyboard) system.
+
+	  More information is available: <file:Documentation/input/input.rst>
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called input.
+
+if INPUT
+
+config INPUT_LEDS
+	tristate "Export input device LEDs in sysfs"
+	depends on LEDS_CLASS
+	default INPUT
+	help
+	  Say Y here if you would like to export LEDs on input devices
+	  as standard LED class devices in sysfs.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called input-leds.
+
+config INPUT_FF_MEMLESS
+	tristate "Support for memoryless force-feedback devices"
+	help
+	  Say Y here if you have memoryless force-feedback input device
+	  such as Logitech WingMan Force 3D, ThrustMaster FireStorm Dual
+	  Power 2, or similar. You will also need to enable hardware-specific
+	  driver.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ff-memless.
+
+config INPUT_SPARSEKMAP
+	tristate "Sparse keymap support library"
+	help
+	  Say Y here if you are using a driver for an input
+	  device that uses sparse keymap. This option is only
+	  useful for out-of-tree drivers since in-tree drivers
+	  select it automatically.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sparse-keymap.
+
+config INPUT_MATRIXKMAP
+	tristate "Matrix keymap support library"
+	help
+	  Say Y here if you are using a driver for an input
+	  device that uses matrix keymap. This option is only
+	  useful for out-of-tree drivers since in-tree drivers
+	  select it automatically.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called matrix-keymap.
+
+config INPUT_VIVALDIFMAP
+	tristate
+	help
+	  ChromeOS Vivaldi keymap support library. This is a hidden
+	  option so that drivers can use common code to parse and
+	  expose the vivaldi function row keymap.
+
+comment "Userland interfaces"
+
+config INPUT_MOUSEDEV
+	tristate "Mouse interface"
+	help
+	  Say Y here if you want your mouse to be accessible as char devices
+	  13:32+ - /dev/input/mouseX and 13:63 - /dev/input/mice as an
+	  emulated IntelliMouse Explorer PS/2 mouse. That way, all user space
+	  programs (including SVGAlib, GPM and X) will be able to use your
+	  mouse.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mousedev.
+
+config INPUT_MOUSEDEV_PSAUX
+	bool "Provide legacy /dev/psaux device"
+	depends on INPUT_MOUSEDEV
+	help
+	  Say Y here if you want your mouse also be accessible as char device
+	  10:1 - /dev/psaux. The data available through /dev/psaux is exactly
+	  the same as the data from /dev/input/mice.
+
+	  If unsure, say Y.
+
+config INPUT_MOUSEDEV_SCREEN_X
+	int "Horizontal screen resolution"
+	depends on INPUT_MOUSEDEV
+	default "1024"
+	help
+	  If you're using a digitizer, or a graphic tablet, and want to use
+	  it as a mouse then the mousedev driver needs to know the X window
+	  screen resolution you are using to correctly scale the data. If
+	  you're not using a digitizer, this value is ignored.
+
+config INPUT_MOUSEDEV_SCREEN_Y
+	int "Vertical screen resolution"
+	depends on INPUT_MOUSEDEV
+	default "768"
+	help
+	  If you're using a digitizer, or a graphic tablet, and want to use
+	  it as a mouse then the mousedev driver needs to know the X window
+	  screen resolution you are using to correctly scale the data. If
+	  you're not using a digitizer, this value is ignored.
+
+config INPUT_JOYDEV
+	tristate "Joystick interface"
+	help
+	  Say Y here if you want your joystick or gamepad to be
+	  accessible as char device 13:0+ - /dev/input/jsX device.
+
+	  If unsure, say Y.
+
+	  More information is available: <file:Documentation/input/joydev/joystick.rst>
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called joydev.
+
+config INPUT_EVDEV
+	tristate "Event interface"
+	help
+	  Say Y here if you want your input device events be accessible
+	  under char device 13:64+ - /dev/input/eventX in a generic way.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called evdev.
+
+config INPUT_KUNIT_TEST
+	tristate "KUnit tests for Input" if !KUNIT_ALL_TESTS
+	depends on INPUT && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Say Y here if you want to build the KUnit tests for the input
+	  subsystem.
+
+	  If in doubt, say "N".
+
+config INPUT_APMPOWER
+	tristate "Input Power Event -> APM Bridge" if EXPERT
+	depends on INPUT && APM_EMULATION
+	help
+	  Say Y here if you want suspend key events to trigger a user
+	  requested suspend through APM. This is useful on embedded
+	  systems where such behaviour is desired without userspace
+	  interaction. If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called apm-power.
+
+comment "Input Device Drivers"
+
+source "drivers/input/keyboard/Kconfig"
+
+source "drivers/input/mouse/Kconfig"
+
+source "drivers/input/joystick/Kconfig"
+
+source "drivers/input/tablet/Kconfig"
+
+source "drivers/input/touchscreen/Kconfig"
+
+source "drivers/input/misc/Kconfig"
+
+source "drivers/input/rmi4/Kconfig"
+
+endif
+
+menu "Hardware I/O ports"
+
+source "drivers/input/serio/Kconfig"
+
+source "drivers/input/gameport/Kconfig"
+
+endmenu
+
+endmenu
+