ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 417 insertions, 0 deletions

diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c
new file mode 100644
index 000000000..04314e3ed
--- /dev/null
+++ b/drivers/i2c/i2c-stub.c
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    i2c-stub.c - I2C/SMBus chip emulator
+
+    Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
+    Copyright (C) 2007-2014 Jean Delvare <jdelvare@suse.de>
+
+*/
+
+#define pr_fmt(fmt) "i2c-stub: " fmt
+
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define MAX_CHIPS 10
+
+/*
+ * Support for I2C_FUNC_SMBUS_BLOCK_DATA is disabled by default and must
+ * be enabled explicitly by setting the I2C_FUNC_SMBUS_BLOCK_DATA bits
+ * in the 'functionality' module parameter.
+ */
+#define STUB_FUNC_DEFAULT \
+		(I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \
+		 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \
+		 I2C_FUNC_SMBUS_I2C_BLOCK)
+
+#define STUB_FUNC_ALL \
+		(STUB_FUNC_DEFAULT | I2C_FUNC_SMBUS_BLOCK_DATA)
+
+static unsigned short chip_addr[MAX_CHIPS];
+module_param_array(chip_addr, ushort, NULL, S_IRUGO);
+MODULE_PARM_DESC(chip_addr,
+		 "Chip addresses (up to 10, between 0x03 and 0x77)");
+
+static unsigned long functionality = STUB_FUNC_DEFAULT;
+module_param(functionality, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(functionality, "Override functionality bitfield");
+
+/* Some chips have banked register ranges */
+
+static u8 bank_reg[MAX_CHIPS];
+module_param_array(bank_reg, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(bank_reg, "Bank register");
+
+static u8 bank_mask[MAX_CHIPS];
+module_param_array(bank_mask, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(bank_mask, "Bank value mask");
+
+static u8 bank_start[MAX_CHIPS];
+module_param_array(bank_start, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(bank_start, "First banked register");
+
+static u8 bank_end[MAX_CHIPS];
+module_param_array(bank_end, byte, NULL, S_IRUGO);
+MODULE_PARM_DESC(bank_end, "Last banked register");
+
+struct smbus_block_data {
+	struct list_head node;
+	u8 command;
+	u8 len;
+	u8 block[I2C_SMBUS_BLOCK_MAX];
+};
+
+struct stub_chip {
+	u8 pointer;
+	u16 words[256];		/* Byte operations use the LSB as per SMBus
+				   specification */
+	struct list_head smbus_blocks;
+
+	/* For chips with banks, extra registers are allocated dynamically */
+	u8 bank_reg;
+	u8 bank_shift;
+	u8 bank_mask;
+	u8 bank_sel;		/* Currently selected bank */
+	u8 bank_start;
+	u8 bank_end;
+	u16 bank_size;
+	u16 *bank_words;	/* Room for bank_mask * bank_size registers */
+};
+
+static struct stub_chip *stub_chips;
+static int stub_chips_nr;
+
+static struct smbus_block_data *stub_find_block(struct device *dev,
+						struct stub_chip *chip,
+						u8 command, bool create)
+{
+	struct smbus_block_data *b, *rb = NULL;
+
+	list_for_each_entry(b, &chip->smbus_blocks, node) {
+		if (b->command == command) {
+			rb = b;
+			break;
+		}
+	}
+	if (rb == NULL && create) {
+		rb = devm_kzalloc(dev, sizeof(*rb), GFP_KERNEL);
+		if (rb == NULL)
+			return rb;
+		rb->command = command;
+		list_add(&rb->node, &chip->smbus_blocks);
+	}
+	return rb;
+}
+
+static u16 *stub_get_wordp(struct stub_chip *chip, u8 offset)
+{
+	if (chip->bank_sel &&
+	    offset >= chip->bank_start && offset <= chip->bank_end)
+		return chip->bank_words +
+		       (chip->bank_sel - 1) * chip->bank_size +
+		       offset - chip->bank_start;
+	else
+		return chip->words + offset;
+}
+
+/* Return negative errno on error. */
+static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+	char read_write, u8 command, int size, union i2c_smbus_data *data)
+{
+	s32 ret;
+	int i, len;
+	struct stub_chip *chip = NULL;
+	struct smbus_block_data *b;
+	u16 *wordp;
+
+	/* Search for the right chip */
+	for (i = 0; i < stub_chips_nr; i++) {
+		if (addr == chip_addr[i]) {
+			chip = stub_chips + i;
+			break;
+		}
+	}
+	if (!chip)
+		return -ENODEV;
+
+	switch (size) {
+
+	case I2C_SMBUS_QUICK:
+		dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr);
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE) {
+			chip->pointer = command;
+			dev_dbg(&adap->dev,
+				"smbus byte - addr 0x%02x, wrote 0x%02x.\n",
+				addr, command);
+		} else {
+			wordp = stub_get_wordp(chip, chip->pointer++);
+			data->byte = *wordp & 0xff;
+			dev_dbg(&adap->dev,
+				"smbus byte - addr 0x%02x, read  0x%02x.\n",
+				addr, data->byte);
+		}
+
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		wordp = stub_get_wordp(chip, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			*wordp &= 0xff00;
+			*wordp |= data->byte;
+			dev_dbg(&adap->dev,
+				"smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n",
+				addr, data->byte, command);
+
+			/* Set the bank as needed */
+			if (chip->bank_words && command == chip->bank_reg) {
+				chip->bank_sel =
+					(data->byte >> chip->bank_shift)
+					& chip->bank_mask;
+				dev_dbg(&adap->dev,
+					"switching to bank %u.\n",
+					chip->bank_sel);
+			}
+		} else {
+			data->byte = *wordp & 0xff;
+			dev_dbg(&adap->dev,
+				"smbus byte data - addr 0x%02x, read  0x%02x at 0x%02x.\n",
+				addr, data->byte, command);
+		}
+		chip->pointer = command + 1;
+
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		wordp = stub_get_wordp(chip, command);
+		if (read_write == I2C_SMBUS_WRITE) {
+			*wordp = data->word;
+			dev_dbg(&adap->dev,
+				"smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n",
+				addr, data->word, command);
+		} else {
+			data->word = *wordp;
+			dev_dbg(&adap->dev,
+				"smbus word data - addr 0x%02x, read  0x%04x at 0x%02x.\n",
+				addr, data->word, command);
+		}
+
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		/*
+		 * We ignore banks here, because banked chips don't use I2C
+		 * block transfers
+		 */
+		if (data->block[0] == 0 ||
+		    data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+			ret = -EINVAL;
+			break;
+		}
+		if (data->block[0] > 256 - command)	/* Avoid overrun */
+			data->block[0] = 256 - command;
+		len = data->block[0];
+		if (read_write == I2C_SMBUS_WRITE) {
+			for (i = 0; i < len; i++) {
+				chip->words[command + i] &= 0xff00;
+				chip->words[command + i] |= data->block[1 + i];
+			}
+			dev_dbg(&adap->dev,
+				"i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
+				addr, len, command);
+		} else {
+			for (i = 0; i < len; i++) {
+				data->block[1 + i] =
+					chip->words[command + i] & 0xff;
+			}
+			dev_dbg(&adap->dev,
+				"i2c block data - addr 0x%02x, read  %d bytes at 0x%02x.\n",
+				addr, len, command);
+		}
+
+		ret = 0;
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		/*
+		 * We ignore banks here, because chips typically don't use both
+		 * banks and SMBus block transfers
+		 */
+		b = stub_find_block(&adap->dev, chip, command, false);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) {
+				ret = -EINVAL;
+				break;
+			}
+			if (b == NULL) {
+				b = stub_find_block(&adap->dev, chip, command,
+						    true);
+				if (b == NULL) {
+					ret = -ENOMEM;
+					break;
+				}
+			}
+			/* Largest write sets read block length */
+			if (len > b->len)
+				b->len = len;
+			for (i = 0; i < len; i++)
+				b->block[i] = data->block[i + 1];
+			/* update for byte and word commands */
+			chip->words[command] = (b->block[0] << 8) | b->len;
+			dev_dbg(&adap->dev,
+				"smbus block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
+				addr, len, command);
+		} else {
+			if (b == NULL) {
+				dev_dbg(&adap->dev,
+					"SMBus block read command without prior block write not supported\n");
+				ret = -EOPNOTSUPP;
+				break;
+			}
+			len = b->len;
+			data->block[0] = len;
+			for (i = 0; i < len; i++)
+				data->block[i + 1] = b->block[i];
+			dev_dbg(&adap->dev,
+				"smbus block data - addr 0x%02x, read  %d bytes at 0x%02x.\n",
+				addr, len, command);
+		}
+
+		ret = 0;
+		break;
+
+	default:
+		dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
+		ret = -EOPNOTSUPP;
+		break;
+	} /* switch (size) */
+
+	return ret;
+}
+
+static u32 stub_func(struct i2c_adapter *adapter)
+{
+	return STUB_FUNC_ALL & functionality;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+	.functionality	= stub_func,
+	.smbus_xfer	= stub_xfer,
+};
+
+static struct i2c_adapter stub_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.algo		= &smbus_algorithm,
+	.name		= "SMBus stub driver",
+};
+
+static int __init i2c_stub_allocate_banks(int i)
+{
+	struct stub_chip *chip = stub_chips + i;
+
+	chip->bank_reg = bank_reg[i];
+	chip->bank_start = bank_start[i];
+	chip->bank_end = bank_end[i];
+	chip->bank_size = bank_end[i] - bank_start[i] + 1;
+
+	/* We assume that all bits in the mask are contiguous */
+	chip->bank_mask = bank_mask[i];
+	while (!(chip->bank_mask & 1)) {
+		chip->bank_shift++;
+		chip->bank_mask >>= 1;
+	}
+
+	chip->bank_words = kcalloc(chip->bank_mask * chip->bank_size,
+				   sizeof(u16),
+				   GFP_KERNEL);
+	if (!chip->bank_words)
+		return -ENOMEM;
+
+	pr_debug("Allocated %u banks of %u words each (registers 0x%02x to 0x%02x)\n",
+		 chip->bank_mask, chip->bank_size, chip->bank_start,
+		 chip->bank_end);
+
+	return 0;
+}
+
+static void i2c_stub_free(void)
+{
+	int i;
+
+	for (i = 0; i < stub_chips_nr; i++)
+		kfree(stub_chips[i].bank_words);
+	kfree(stub_chips);
+}
+
+static int __init i2c_stub_init(void)
+{
+	int i, ret;
+
+	if (!chip_addr[0]) {
+		pr_err("Please specify a chip address\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
+		if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
+			pr_err("Invalid chip address 0x%02x\n",
+			       chip_addr[i]);
+			return -EINVAL;
+		}
+
+		pr_info("Virtual chip at 0x%02x\n", chip_addr[i]);
+	}
+
+	/* Allocate memory for all chips at once */
+	stub_chips_nr = i;
+	stub_chips = kzalloc_objs(struct stub_chip, stub_chips_nr);
+	if (!stub_chips)
+		return -ENOMEM;
+
+	for (i = 0; i < stub_chips_nr; i++) {
+		INIT_LIST_HEAD(&stub_chips[i].smbus_blocks);
+
+		/* Allocate extra memory for banked register ranges */
+		if (bank_mask[i]) {
+			ret = i2c_stub_allocate_banks(i);
+			if (ret)
+				goto fail_free;
+		}
+	}
+
+	ret = i2c_add_adapter(&stub_adapter);
+	if (ret)
+		goto fail_free;
+
+	return 0;
+
+ fail_free:
+	i2c_stub_free();
+	return ret;
+}
+
+static void __exit i2c_stub_exit(void)
+{
+	i2c_del_adapter(&stub_adapter);
+	i2c_stub_free();
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("I2C stub driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_stub_init);
+module_exit(i2c_stub_exit);