treewide: refresh kmalloc_obj() conversionsgrafted

This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci

This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.

Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.

Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>

1 files changed, 184 insertions, 0 deletions

diff --git a/drivers/hwmon/ltc4260.c b/drivers/hwmon/ltc4260.c
new file mode 100644
index 000000000..37a85125d
--- /dev/null
+++ b/drivers/hwmon/ltc4260.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Linear Technology LTC4260 I2C Positive Voltage Hot Swap Controller
+ *
+ * Copyright (c) 2014 Guenter Roeck
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/regmap.h>
+
+/* chip registers */
+#define LTC4260_CONTROL	0x00
+#define LTC4260_ALERT	0x01
+#define LTC4260_STATUS	0x02
+#define LTC4260_FAULT	0x03
+#define LTC4260_SENSE	0x04
+#define LTC4260_SOURCE	0x05
+#define LTC4260_ADIN	0x06
+
+/*
+ * Fault register bits
+ */
+#define FAULT_OV	(1 << 0)
+#define FAULT_UV	(1 << 1)
+#define FAULT_OC	(1 << 2)
+#define FAULT_POWER_BAD	(1 << 3)
+#define FAULT_FET_SHORT	(1 << 5)
+
+/* Return the voltage from the given register in mV or mA */
+static int ltc4260_get_value(struct device *dev, u8 reg)
+{
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(regmap, reg, &val);
+	if (ret < 0)
+		return ret;
+
+	switch (reg) {
+	case LTC4260_ADIN:
+		/* 10 mV resolution. Convert to mV. */
+		val = val * 10;
+		break;
+	case LTC4260_SOURCE:
+		/* 400 mV resolution. Convert to mV. */
+		val = val * 400;
+		break;
+	case LTC4260_SENSE:
+		/*
+		 * 300 uV resolution. Convert to current as measured with
+		 * an 1 mOhm sense resistor, in mA. If a different sense
+		 * resistor is installed, calculate the actual current by
+		 * dividing the reported current by the sense resistor value
+		 * in mOhm.
+		 */
+		val = val * 300;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return val;
+}
+
+static ssize_t ltc4260_value_show(struct device *dev,
+				  struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int value;
+
+	value = ltc4260_get_value(dev, attr->index);
+	if (value < 0)
+		return value;
+	return sysfs_emit(buf, "%d\n", value);
+}
+
+static ssize_t ltc4260_bool_show(struct device *dev,
+				 struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int fault;
+	int ret;
+
+	ret = regmap_read(regmap, LTC4260_FAULT, &fault);
+	if (ret < 0)
+		return ret;
+
+	fault &= attr->index;
+	if (fault)		/* Clear reported faults in chip register */
+		regmap_update_bits(regmap, LTC4260_FAULT, attr->index, 0);
+
+	return sysfs_emit(buf, "%d\n", !!fault);
+}
+
+/* Voltages */
+static SENSOR_DEVICE_ATTR_RO(in1_input, ltc4260_value, LTC4260_SOURCE);
+static SENSOR_DEVICE_ATTR_RO(in2_input, ltc4260_value, LTC4260_ADIN);
+
+/*
+ * Voltage alarms
+ * UV/OV faults are associated with the input voltage, and the POWER BAD and
+ * FET SHORT faults are associated with the output voltage.
+ */
+static SENSOR_DEVICE_ATTR_RO(in1_min_alarm, ltc4260_bool, FAULT_UV);
+static SENSOR_DEVICE_ATTR_RO(in1_max_alarm, ltc4260_bool, FAULT_OV);
+static SENSOR_DEVICE_ATTR_RO(in2_alarm, ltc4260_bool,
+			     FAULT_POWER_BAD | FAULT_FET_SHORT);
+
+/* Current (via sense resistor) */
+static SENSOR_DEVICE_ATTR_RO(curr1_input, ltc4260_value, LTC4260_SENSE);
+
+/* Overcurrent alarm */
+static SENSOR_DEVICE_ATTR_RO(curr1_max_alarm, ltc4260_bool, FAULT_OC);
+
+static struct attribute *ltc4260_attrs[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_curr1_input.dev_attr.attr,
+	&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
+
+	NULL,
+};
+ATTRIBUTE_GROUPS(ltc4260);
+
+static const struct regmap_config ltc4260_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = LTC4260_ADIN,
+};
+
+static int ltc4260_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct device *hwmon_dev;
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(client, &ltc4260_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(regmap);
+	}
+
+	/* Clear faults */
+	regmap_write(regmap, LTC4260_FAULT, 0x00);
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   regmap,
+							   ltc4260_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id ltc4260_id[] = {
+	{ .name = "ltc4260" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, ltc4260_id);
+
+static struct i2c_driver ltc4260_driver = {
+	.driver = {
+		   .name = "ltc4260",
+		   },
+	.probe = ltc4260_probe,
+	.id_table = ltc4260_id,
+};
+
+module_i2c_driver(ltc4260_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("LTC4260 driver");
+MODULE_LICENSE("GPL");