Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Fix error output of boot instance creation failure

   Currently if a boot instance creation fails, instead of printing out
   the name of the instance that failed, it prints "(null)". That is
   because it prints "cur_str" that had already been processed by
   strsep(). Print the saved name instead.

   While at it, print the error code of the failure.

 - Fix use-after-free for same named historgrams

   Histograms can be named so that they can be used in multiple events.
   But if the named histogram has a variable attached, the second event
   that uses the named histogram which duplicates it and needs to free
   the original after duplication leaves the old variable in place and
   still visible. If another histogram uses than variable, it will use
   the stale one which will try to reference the freed duplicate
   histogram and crash the kernel.

   Free the duplicate variables along with the duplicated histogram
   data.

 - Check return value of kthread_run() in event self test

   The events self tests uses a kthread for testing but does not check
   if it succeeded in creating a kthread. If the kthread creation were
   to fail, the code will still try to call kthread_stop() on the error
   returned.

 - Fix race between reading trace_pipe and updating subbuffer size

   If a user is reading the trace_pipe file at the same time they update
   the ring buffer sub-buffer size, can cause the trace_pipe read to
   read stale data. Add trace_access_lock() around updating the ring
   buffer sub-buffer size.

 - Fix eventfs_inode on failure path in creation of the events directory

   In the creation of the "events" directory, if after allocating the
   eventfs_inode a failure is detected, it calls cleanup_ei() which
   calls free_ei(). The free_ei() will test if eventfs_inode being freed
   has no children. It is a bug if it does. But on the failure case of
   the creation of the "events" directory, the children lists have not
   yet been initialized and the free will trigger a warning because
   list_empty() on an uninitialized list returns false.

   Move the initialization into init_ei() where it makes more sense and
   makes sure that a created eventfs_inode has its lists initialized
   upon creation.

 - Check return value of kthread_run() in ftrace direct sample code

   The sample code that shows how to use the ftrace direct calls does
   not test the return of kthread_run() to see if it succeeds. Return a
   failure if the kthread_run() doesn't succeed.

 - Clear user events state on fork in case of alloc failure

   On fork, the child gets a pointer to the parent's user events state.
   It makes a copy of it then updates the child's pointer to it. But if
   the allocation fails, the duplication function leaves the child with
   a pointer to its parent's descriptor. When the child cleans up its
   data, it will free the parent's descriptor while the parent is still
   using it.

   In the duplication function, set the child's user_event_mm to NULL
   before testing if the allocation succeeded, and when it exits it will
   not free the parent's descriptor.

 - Fix retry exhaustion in simple ring buffer reader swap

   simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
   post-decrements it only after a failed link replacement. On the final
   attempt, a successful replacement leaves retry at zero, while a
   failed replacement leaves it at -1.

   But the check for success expects the retry value to be non-zero and
   exits with an error on zero. This is the opposite result. Fix it.

 - Fail nicely when the remote swap_reader_page() returns an error

   Currently, if the swap_reader_page() of a remote buffer fails, it
   triggers a WARN_ON_ONCE() and continues normally. Instead, have it
   exit with an error and a pr_warn() print instead of a full WARNING.

* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Stop remote reader update when page swap fails
  tracing: Fix retry exhaustion in simple ring buffer reader swap
  tracing/user_events: Clear copied tracing state before fork duplication
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
  eventfs: Initialize ei->children and ei->list in init_ei()
  tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
  tracing: Fix crash passing ERR_PTR to kthread_stop()
  tracing: Fix use-after-free with same-name named triggers
  tracing: Fix logged instance name on creation failure

1 files changed, 184 insertions, 0 deletions

diff --git a/drivers/hwmon/ltc4260.c b/drivers/hwmon/ltc4260.c
new file mode 100644
index 000000000..37a85125d
--- /dev/null
+++ b/drivers/hwmon/ltc4260.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Linear Technology LTC4260 I2C Positive Voltage Hot Swap Controller
+ *
+ * Copyright (c) 2014 Guenter Roeck
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/regmap.h>
+
+/* chip registers */
+#define LTC4260_CONTROL	0x00
+#define LTC4260_ALERT	0x01
+#define LTC4260_STATUS	0x02
+#define LTC4260_FAULT	0x03
+#define LTC4260_SENSE	0x04
+#define LTC4260_SOURCE	0x05
+#define LTC4260_ADIN	0x06
+
+/*
+ * Fault register bits
+ */
+#define FAULT_OV	(1 << 0)
+#define FAULT_UV	(1 << 1)
+#define FAULT_OC	(1 << 2)
+#define FAULT_POWER_BAD	(1 << 3)
+#define FAULT_FET_SHORT	(1 << 5)
+
+/* Return the voltage from the given register in mV or mA */
+static int ltc4260_get_value(struct device *dev, u8 reg)
+{
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(regmap, reg, &val);
+	if (ret < 0)
+		return ret;
+
+	switch (reg) {
+	case LTC4260_ADIN:
+		/* 10 mV resolution. Convert to mV. */
+		val = val * 10;
+		break;
+	case LTC4260_SOURCE:
+		/* 400 mV resolution. Convert to mV. */
+		val = val * 400;
+		break;
+	case LTC4260_SENSE:
+		/*
+		 * 300 uV resolution. Convert to current as measured with
+		 * an 1 mOhm sense resistor, in mA. If a different sense
+		 * resistor is installed, calculate the actual current by
+		 * dividing the reported current by the sense resistor value
+		 * in mOhm.
+		 */
+		val = val * 300;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return val;
+}
+
+static ssize_t ltc4260_value_show(struct device *dev,
+				  struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int value;
+
+	value = ltc4260_get_value(dev, attr->index);
+	if (value < 0)
+		return value;
+	return sysfs_emit(buf, "%d\n", value);
+}
+
+static ssize_t ltc4260_bool_show(struct device *dev,
+				 struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int fault;
+	int ret;
+
+	ret = regmap_read(regmap, LTC4260_FAULT, &fault);
+	if (ret < 0)
+		return ret;
+
+	fault &= attr->index;
+	if (fault)		/* Clear reported faults in chip register */
+		regmap_update_bits(regmap, LTC4260_FAULT, attr->index, 0);
+
+	return sysfs_emit(buf, "%d\n", !!fault);
+}
+
+/* Voltages */
+static SENSOR_DEVICE_ATTR_RO(in1_input, ltc4260_value, LTC4260_SOURCE);
+static SENSOR_DEVICE_ATTR_RO(in2_input, ltc4260_value, LTC4260_ADIN);
+
+/*
+ * Voltage alarms
+ * UV/OV faults are associated with the input voltage, and the POWER BAD and
+ * FET SHORT faults are associated with the output voltage.
+ */
+static SENSOR_DEVICE_ATTR_RO(in1_min_alarm, ltc4260_bool, FAULT_UV);
+static SENSOR_DEVICE_ATTR_RO(in1_max_alarm, ltc4260_bool, FAULT_OV);
+static SENSOR_DEVICE_ATTR_RO(in2_alarm, ltc4260_bool,
+			     FAULT_POWER_BAD | FAULT_FET_SHORT);
+
+/* Current (via sense resistor) */
+static SENSOR_DEVICE_ATTR_RO(curr1_input, ltc4260_value, LTC4260_SENSE);
+
+/* Overcurrent alarm */
+static SENSOR_DEVICE_ATTR_RO(curr1_max_alarm, ltc4260_bool, FAULT_OC);
+
+static struct attribute *ltc4260_attrs[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_curr1_input.dev_attr.attr,
+	&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
+
+	NULL,
+};
+ATTRIBUTE_GROUPS(ltc4260);
+
+static const struct regmap_config ltc4260_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = LTC4260_ADIN,
+};
+
+static int ltc4260_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct device *hwmon_dev;
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(client, &ltc4260_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(regmap);
+	}
+
+	/* Clear faults */
+	regmap_write(regmap, LTC4260_FAULT, 0x00);
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   regmap,
+							   ltc4260_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id ltc4260_id[] = {
+	{ .name = "ltc4260" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, ltc4260_id);
+
+static struct i2c_driver ltc4260_driver = {
+	.driver = {
+		   .name = "ltc4260",
+		   },
+	.probe = ltc4260_probe,
+	.id_table = ltc4260_id,
+};
+
+module_i2c_driver(ltc4260_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("LTC4260 driver");
+MODULE_LICENSE("GPL");