Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 60 insertions, 0 deletions

diff --git a/drivers/hid/hid-xinmo.c b/drivers/hid/hid-xinmo.c
new file mode 100644
index 000000000..66b8bfb6e
--- /dev/null
+++ b/drivers/hid/hid-xinmo.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  HID driver for Xin-Mo devices, currently only the Dual Arcade controller.
+ *  Fixes the negative axis event values (the devices sends -2) to match the
+ *  logical axis minimum of the HID report descriptor (the report announces
+ *  -1). It is needed because hid-input discards out of bounds values.
+ *  (This module is based on "hid-saitek" and "hid-lg".)
+ *
+ *  Copyright (c) 2013 Olivier Scherler
+ */
+
+/*
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include "hid-ids.h"
+
+/*
+ * Fix negative events that are out of bounds.
+ */
+static int xinmo_event(struct hid_device *hdev, struct hid_field *field,
+		struct hid_usage *usage, __s32 value)
+{
+	switch (usage->code) {
+	case ABS_X:
+	case ABS_Y:
+	case ABS_Z:
+	case ABS_RX:
+		if (value < -1) {
+			input_event(field->hidinput->input, usage->type,
+				usage->code, -1);
+			return 1;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static const struct hid_device_id xinmo_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_THT_2P_ARCADE) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(hid, xinmo_devices);
+
+static struct hid_driver xinmo_driver = {
+	.name = "xinmo",
+	.id_table = xinmo_devices,
+	.event = xinmo_event
+};
+
+module_hid_driver(xinmo_driver);
+MODULE_DESCRIPTION("HID driver for Xin-Mo devices");
+MODULE_LICENSE("GPL");