Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 106 insertions, 0 deletions

diff --git a/drivers/hid/hid-viewsonic.c b/drivers/hid/hid-viewsonic.c
new file mode 100644
index 000000000..532bed88b
--- /dev/null
+++ b/drivers/hid/hid-viewsonic.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  HID driver for ViewSonic devices not fully compliant with HID standard
+ *
+ *  Copyright (c) 2017 Nikolai Kondrashov
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+/* Size of the original descriptor of PD1011 signature pad */
+#define PD1011_RDESC_ORIG_SIZE	408
+
+/* Fixed report descriptor of PD1011 signature pad */
+static const __u8 pd1011_rdesc_fixed[] = {
+	0x05, 0x0D,             /*  Usage Page (Digitizer),             */
+	0x09, 0x01,             /*  Usage (Digitizer),                  */
+	0xA1, 0x01,             /*  Collection (Application),           */
+	0x85, 0x02,             /*      Report ID (2),                  */
+	0x09, 0x20,             /*      Usage (Stylus),                 */
+	0xA0,                   /*      Collection (Physical),          */
+	0x75, 0x10,             /*          Report Size (16),           */
+	0x95, 0x01,             /*          Report Count (1),           */
+	0xA4,                   /*          Push,                       */
+	0x05, 0x01,             /*          Usage Page (Desktop),       */
+	0x65, 0x13,             /*          Unit (Inch),                */
+	0x55, 0xFD,             /*          Unit Exponent (-3),         */
+	0x34,                   /*          Physical Minimum (0),       */
+	0x09, 0x30,             /*          Usage (X),                  */
+	0x46, 0x5D, 0x21,       /*          Physical Maximum (8541),    */
+	0x27, 0x80, 0xA9,
+		0x00, 0x00,     /*          Logical Maximum (43392),    */
+	0x81, 0x02,             /*          Input (Variable),           */
+	0x09, 0x31,             /*          Usage (Y),                  */
+	0x46, 0xDA, 0x14,       /*          Physical Maximum (5338),    */
+	0x26, 0xF0, 0x69,       /*          Logical Maximum (27120),    */
+	0x81, 0x02,             /*          Input (Variable),           */
+	0xB4,                   /*          Pop,                        */
+	0x14,                   /*          Logical Minimum (0),        */
+	0x25, 0x01,             /*          Logical Maximum (1),        */
+	0x75, 0x01,             /*          Report Size (1),            */
+	0x95, 0x01,             /*          Report Count (1),           */
+	0x81, 0x03,             /*          Input (Constant, Variable), */
+	0x09, 0x32,             /*          Usage (In Range),           */
+	0x09, 0x42,             /*          Usage (Tip Switch),         */
+	0x95, 0x02,             /*          Report Count (2),           */
+	0x81, 0x02,             /*          Input (Variable),           */
+	0x95, 0x05,             /*          Report Count (5),           */
+	0x81, 0x03,             /*          Input (Constant, Variable), */
+	0x75, 0x10,             /*          Report Size (16),           */
+	0x95, 0x01,             /*          Report Count (1),           */
+	0x09, 0x30,             /*          Usage (Tip Pressure),       */
+	0x15, 0x05,             /*          Logical Minimum (5),        */
+	0x26, 0xFF, 0x07,       /*          Logical Maximum (2047),     */
+	0x81, 0x02,             /*          Input (Variable),           */
+	0x75, 0x10,             /*          Report Size (16),           */
+	0x95, 0x01,             /*          Report Count (1),           */
+	0x81, 0x03,             /*          Input (Constant, Variable), */
+	0xC0,                   /*      End Collection,                 */
+	0xC0                    /*  End Collection                      */
+};
+
+static const __u8 *viewsonic_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+					  unsigned int *rsize)
+{
+	switch (hdev->product) {
+	case USB_DEVICE_ID_VIEWSONIC_PD1011:
+	case USB_DEVICE_ID_SIGNOTEC_VIEWSONIC_PD1011:
+		if (*rsize == PD1011_RDESC_ORIG_SIZE) {
+			*rsize = sizeof(pd1011_rdesc_fixed);
+			return pd1011_rdesc_fixed;
+		}
+		break;
+	}
+
+	return rdesc;
+}
+
+static const struct hid_device_id viewsonic_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_VIEWSONIC,
+				USB_DEVICE_ID_VIEWSONIC_PD1011) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SIGNOTEC,
+				USB_DEVICE_ID_SIGNOTEC_VIEWSONIC_PD1011) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, viewsonic_devices);
+
+static struct hid_driver viewsonic_driver = {
+	.name = "viewsonic",
+	.id_table = viewsonic_devices,
+	.report_fixup = viewsonic_report_fixup,
+};
+module_hid_driver(viewsonic_driver);
+
+MODULE_DESCRIPTION("HID driver for ViewSonic devices not fully compliant with HID standard");
+MODULE_LICENSE("GPL");