drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 684 insertions, 0 deletions

diff --git a/drivers/hid/hid-steelseries.c b/drivers/hid/hid-steelseries.c
new file mode 100644
index 000000000..7292da031
--- /dev/null
+++ b/drivers/hid/hid-steelseries.c
@@ -0,0 +1,684 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  HID driver for Steelseries devices
+ *
+ *  Copyright (c) 2013 Simon Wood
+ */
+
+/*
+ */
+
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/leds.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/slab.h>
+
+#include "hid-ids.h"
+
+#define STEELSERIES_SRWS1		BIT(0)
+#define STEELSERIES_MSI_RGB		BIT(1)
+
+#define STEELSERIES_MSI_RGB_WVALUE 0x0300 /* Feature report, ID 0 */
+#define STEELSERIES_MSI_RGB_REPORT_LEN 524
+#define STEELSERIES_MSI_RGB_OPCODE 0x0c
+#define STEELSERIES_MSI_RGB_KLC_MODE 0x66
+#define STEELSERIES_MSI_RGB_ALC_MODE 0x06
+
+#define STEELSERIES_HAS_LEDS_MULTICOLOR \
+	(IS_BUILTIN(CONFIG_LEDS_CLASS_MULTICOLOR) || \
+	 (IS_MODULE(CONFIG_LEDS_CLASS_MULTICOLOR) && IS_MODULE(CONFIG_HID_STEELSERIES)))
+
+struct steelseries_device {
+	struct hid_device *hdev;
+	unsigned long quirks;
+
+#if STEELSERIES_HAS_LEDS_MULTICOLOR
+	struct led_classdev_mc mc_cdev;
+	struct mc_subled subled_info[3];
+	struct mutex rgb_lock; /* protects rgb_buf */
+	u8 *rgb_buf;
+#endif
+};
+
+#if IS_BUILTIN(CONFIG_LEDS_CLASS) || \
+    (IS_MODULE(CONFIG_LEDS_CLASS) && IS_MODULE(CONFIG_HID_STEELSERIES))
+#define SRWS1_NUMBER_LEDS 15
+struct steelseries_srws1_data {
+	__u16 led_state;
+	/* the last element is used for setting all leds simultaneously */
+	struct led_classdev *led[SRWS1_NUMBER_LEDS + 1];
+};
+#endif
+
+/* Fixed report descriptor for Steelseries SRW-S1 wheel controller
+ *
+ * The original descriptor hides the sensitivity and assists dials
+ * a custom vendor usage page. This inserts a patch to make them
+ * appear in the 'Generic Desktop' usage.
+ */
+
+static const __u8 steelseries_srws1_rdesc_fixed[] = {
+0x05, 0x01,         /*  Usage Page (Desktop)                */
+0x09, 0x08,         /*  Usage (MultiAxis), Changed          */
+0xA1, 0x01,         /*  Collection (Application),           */
+0xA1, 0x02,         /*      Collection (Logical),           */
+0x95, 0x01,         /*          Report Count (1),           */
+0x05, 0x01,         /* Changed  Usage Page (Desktop),       */
+0x09, 0x30,         /* Changed  Usage (X),                  */
+0x16, 0xF8, 0xF8,   /*          Logical Minimum (-1800),    */
+0x26, 0x08, 0x07,   /*          Logical Maximum (1800),     */
+0x65, 0x14,         /*          Unit (Degrees),             */
+0x55, 0x0F,         /*          Unit Exponent (15),         */
+0x75, 0x10,         /*          Report Size (16),           */
+0x81, 0x02,         /*          Input (Variable),           */
+0x09, 0x31,         /* Changed  Usage (Y),                  */
+0x15, 0x00,         /*          Logical Minimum (0),        */
+0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),     */
+0x75, 0x0C,         /*          Report Size (12),           */
+0x81, 0x02,         /*          Input (Variable),           */
+0x09, 0x32,         /* Changed  Usage (Z),                  */
+0x15, 0x00,         /*          Logical Minimum (0),        */
+0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),     */
+0x75, 0x0C,         /*          Report Size (12),           */
+0x81, 0x02,         /*          Input (Variable),           */
+0x05, 0x01,         /*          Usage Page (Desktop),       */
+0x09, 0x39,         /*          Usage (Hat Switch),         */
+0x25, 0x07,         /*          Logical Maximum (7),        */
+0x35, 0x00,         /*          Physical Minimum (0),       */
+0x46, 0x3B, 0x01,   /*          Physical Maximum (315),     */
+0x65, 0x14,         /*          Unit (Degrees),             */
+0x75, 0x04,         /*          Report Size (4),            */
+0x95, 0x01,         /*          Report Count (1),           */
+0x81, 0x02,         /*          Input (Variable),           */
+0x25, 0x01,         /*          Logical Maximum (1),        */
+0x45, 0x01,         /*          Physical Maximum (1),       */
+0x65, 0x00,         /*          Unit,                       */
+0x75, 0x01,         /*          Report Size (1),            */
+0x95, 0x03,         /*          Report Count (3),           */
+0x81, 0x01,         /*          Input (Constant),           */
+0x05, 0x09,         /*          Usage Page (Button),        */
+0x19, 0x01,         /*          Usage Minimum (01h),        */
+0x29, 0x11,         /*          Usage Maximum (11h),        */
+0x95, 0x11,         /*          Report Count (17),          */
+0x81, 0x02,         /*          Input (Variable),           */
+                    /*   ---- Dial patch starts here ----   */
+0x05, 0x01,         /*          Usage Page (Desktop),       */
+0x09, 0x33,         /*          Usage (RX),                 */
+0x75, 0x04,         /*          Report Size (4),            */
+0x95, 0x02,         /*          Report Count (2),           */
+0x15, 0x00,         /*          Logical Minimum (0),        */
+0x25, 0x0b,         /*          Logical Maximum (b),        */
+0x81, 0x02,         /*          Input (Variable),           */
+0x09, 0x35,         /*          Usage (RZ),                 */
+0x75, 0x04,         /*          Report Size (4),            */
+0x95, 0x01,         /*          Report Count (1),           */
+0x25, 0x03,         /*          Logical Maximum (3),        */
+0x81, 0x02,         /*          Input (Variable),           */
+                    /*    ---- Dial patch ends here ----    */
+0x06, 0x00, 0xFF,   /*          Usage Page (FF00h),         */
+0x09, 0x01,         /*          Usage (01h),                */
+0x75, 0x04,         /* Changed  Report Size (4),            */
+0x95, 0x0D,         /* Changed  Report Count (13),          */
+0x81, 0x02,         /*          Input (Variable),           */
+0xC0,               /*      End Collection,                 */
+0xA1, 0x02,         /*      Collection (Logical),           */
+0x09, 0x02,         /*          Usage (02h),                */
+0x75, 0x08,         /*          Report Size (8),            */
+0x95, 0x10,         /*          Report Count (16),          */
+0x91, 0x02,         /*          Output (Variable),          */
+0xC0,               /*      End Collection,                 */
+0xC0                /*  End Collection                      */
+};
+
+#if IS_BUILTIN(CONFIG_LEDS_CLASS) || \
+    (IS_MODULE(CONFIG_LEDS_CLASS) && IS_MODULE(CONFIG_HID_STEELSERIES))
+static void steelseries_srws1_set_leds(struct hid_device *hdev, __u16 leds)
+{
+	struct list_head *report_list = &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+	__s32 *value = report->field[0]->value;
+
+	value[0] = 0x40;
+	value[1] = leds & 0xFF;
+	value[2] = leds >> 8;
+	value[3] = 0x00;
+	value[4] = 0x00;
+	value[5] = 0x00;
+	value[6] = 0x00;
+	value[7] = 0x00;
+	value[8] = 0x00;
+	value[9] = 0x00;
+	value[10] = 0x00;
+	value[11] = 0x00;
+	value[12] = 0x00;
+	value[13] = 0x00;
+	value[14] = 0x00;
+	value[15] = 0x00;
+
+	hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
+
+	/* Note: LED change does not show on device until the device is read/polled */
+}
+
+static void steelseries_srws1_led_all_set_brightness(struct led_classdev *led_cdev,
+			enum led_brightness value)
+{
+	struct device *dev = led_cdev->dev->parent;
+	struct hid_device *hid = to_hid_device(dev);
+	struct steelseries_srws1_data *drv_data = hid_get_drvdata(hid);
+
+	if (!drv_data) {
+		hid_err(hid, "Device data not found.");
+		return;
+	}
+
+	if (value == LED_OFF)
+		drv_data->led_state = 0;
+	else
+		drv_data->led_state = (1 << (SRWS1_NUMBER_LEDS + 1)) - 1;
+
+	steelseries_srws1_set_leds(hid, drv_data->led_state);
+}
+
+static enum led_brightness steelseries_srws1_led_all_get_brightness(struct led_classdev *led_cdev)
+{
+	struct device *dev = led_cdev->dev->parent;
+	struct hid_device *hid = to_hid_device(dev);
+	struct steelseries_srws1_data *drv_data;
+
+	drv_data = hid_get_drvdata(hid);
+
+	if (!drv_data) {
+		hid_err(hid, "Device data not found.");
+		return LED_OFF;
+	}
+
+	return (drv_data->led_state >> SRWS1_NUMBER_LEDS) ? LED_FULL : LED_OFF;
+}
+
+static void steelseries_srws1_led_set_brightness(struct led_classdev *led_cdev,
+			enum led_brightness value)
+{
+	struct device *dev = led_cdev->dev->parent;
+	struct hid_device *hid = to_hid_device(dev);
+	struct steelseries_srws1_data *drv_data = hid_get_drvdata(hid);
+	int i, state = 0;
+
+	if (!drv_data) {
+		hid_err(hid, "Device data not found.");
+		return;
+	}
+
+	for (i = 0; i < SRWS1_NUMBER_LEDS; i++) {
+		if (led_cdev != drv_data->led[i])
+			continue;
+
+		state = (drv_data->led_state >> i) & 1;
+		if (value == LED_OFF && state) {
+			drv_data->led_state &= ~(1 << i);
+			steelseries_srws1_set_leds(hid, drv_data->led_state);
+		} else if (value != LED_OFF && !state) {
+			drv_data->led_state |= 1 << i;
+			steelseries_srws1_set_leds(hid, drv_data->led_state);
+		}
+		break;
+	}
+}
+
+static enum led_brightness steelseries_srws1_led_get_brightness(struct led_classdev *led_cdev)
+{
+	struct device *dev = led_cdev->dev->parent;
+	struct hid_device *hid = to_hid_device(dev);
+	struct steelseries_srws1_data *drv_data;
+	int i, value = 0;
+
+	drv_data = hid_get_drvdata(hid);
+
+	if (!drv_data) {
+		hid_err(hid, "Device data not found.");
+		return LED_OFF;
+	}
+
+	for (i = 0; i < SRWS1_NUMBER_LEDS; i++)
+		if (led_cdev == drv_data->led[i]) {
+			value = (drv_data->led_state >> i) & 1;
+			break;
+		}
+
+	return value ? LED_FULL : LED_OFF;
+}
+
+static int steelseries_srws1_probe(struct hid_device *hdev,
+		const struct hid_device_id *id)
+{
+	int ret, i;
+	struct led_classdev *led;
+	struct steelseries_srws1_data *drv_data;
+	size_t name_sz;
+	char *name;
+
+	drv_data = devm_kzalloc(&hdev->dev, sizeof(*drv_data), GFP_KERNEL);
+	if (drv_data == NULL) {
+		hid_err(hdev, "can't alloc SRW-S1 memory\n");
+		return -ENOMEM;
+	}
+
+	hid_set_drvdata(hdev, drv_data);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		goto err;
+	}
+
+	if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 16)) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		goto err;
+	}
+
+	/* register led subsystem */
+	drv_data->led_state = 0;
+	for (i = 0; i < SRWS1_NUMBER_LEDS + 1; i++)
+		drv_data->led[i] = NULL;
+
+	steelseries_srws1_set_leds(hdev, 0);
+
+	name_sz = strlen(hdev->uniq) + 16;
+
+	/* 'ALL', for setting all LEDs simultaneously */
+	led = devm_kzalloc(&hdev->dev, sizeof(struct led_classdev)+name_sz, GFP_KERNEL);
+	if (!led) {
+		hid_err(hdev, "can't allocate memory for LED ALL\n");
+		goto out;
+	}
+
+	name = (void *)(&led[1]);
+	snprintf(name, name_sz, "SRWS1::%s::RPMALL", hdev->uniq);
+	led->name = name;
+	led->brightness = 0;
+	led->max_brightness = 1;
+	led->brightness_get = steelseries_srws1_led_all_get_brightness;
+	led->brightness_set = steelseries_srws1_led_all_set_brightness;
+
+	drv_data->led[SRWS1_NUMBER_LEDS] = led;
+	ret = devm_led_classdev_register(&hdev->dev, led);
+	if (ret) {
+		hid_err(hdev, "failed to register LED %d. Aborting.\n", SRWS1_NUMBER_LEDS);
+		goto out; /* let the driver continue without LEDs */
+	}
+
+	/* Each individual LED */
+	for (i = 0; i < SRWS1_NUMBER_LEDS; i++) {
+		led = devm_kzalloc(&hdev->dev, sizeof(struct led_classdev)+name_sz, GFP_KERNEL);
+		if (!led) {
+			hid_err(hdev, "can't allocate memory for LED %d\n", i);
+			break;
+		}
+
+		name = (void *)(&led[1]);
+		snprintf(name, name_sz, "SRWS1::%s::RPM%d", hdev->uniq, i+1);
+		led->name = name;
+		led->brightness = 0;
+		led->max_brightness = 1;
+		led->brightness_get = steelseries_srws1_led_get_brightness;
+		led->brightness_set = steelseries_srws1_led_set_brightness;
+
+		drv_data->led[i] = led;
+		ret = devm_led_classdev_register(&hdev->dev, led);
+
+		if (ret) {
+			hid_err(hdev, "failed to register LED %d. Aborting.\n", i);
+			break;	/* but let the driver continue without LEDs */
+		}
+	}
+out:
+	return 0;
+err:
+	return ret;
+}
+#endif
+
+static const struct dmi_system_id steelseries_msi_rgb_dmi_table[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Raider A18 HX A9WJG"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-182L"),
+		},
+	},
+	{ }
+};
+
+static struct usb_interface *steelseries_hid_to_usb_intf(struct hid_device *hdev)
+{
+	if (!hid_is_usb(hdev))
+		return NULL;
+
+	return to_usb_interface(hdev->dev.parent);
+}
+
+static bool steelseries_msi_rgb_is_interface0(struct hid_device *hdev)
+{
+	struct usb_interface *intf = steelseries_hid_to_usb_intf(hdev);
+	struct usb_device *udev;
+
+	if (!intf)
+		return false;
+
+	udev = interface_to_usbdev(intf);
+
+	return intf == usb_ifnum_to_if(udev, 0);
+}
+
+#if STEELSERIES_HAS_LEDS_MULTICOLOR
+
+static struct usb_device *steelseries_hid_to_usb_dev(struct hid_device *hdev)
+{
+	struct usb_interface *intf = steelseries_hid_to_usb_intf(hdev);
+
+	if (!intf)
+		return NULL;
+
+	return interface_to_usbdev(intf);
+}
+
+static int steelseries_msi_rgb_set_blocking(struct led_classdev *led_cdev,
+					    enum led_brightness brightness)
+{
+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
+	struct steelseries_device *sd = container_of(mc_cdev,
+						    struct steelseries_device,
+						    mc_cdev);
+	struct hid_device *hdev = sd->hdev;
+	struct usb_device *udev = steelseries_hid_to_usb_dev(hdev);
+	int i, ret;
+	u8 r, g, b;
+
+	static const u8 keys[] = {
+		0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
+		0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
+		0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
+		0x1c, 0x1d, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
+		0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
+		0x2c, 0x2d, 0x2e, 0x2f, 0x30, 0x31, 0x33, 0x34,
+		0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b, 0x3c,
+		0x3d, 0x3e, 0x3f, 0x40, 0x41, 0x42, 0x43, 0x44,
+		0x45, 0x46, 0x47, 0x49, 0x4b, 0x4c, 0x4e, 0x4f,
+		0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
+		0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
+		0x60, 0x61, 0x62, 0x63, 0x64, 0x66, 0xe0, 0xe1,
+		0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xf0
+	};
+	static const u8 alc_zones[] = { 0x00, 0x01, 0x02, 0x03 };
+
+	if (!udev)
+		return -ENODEV;
+
+	mutex_lock(&sd->rgb_lock);
+
+	led_mc_calc_color_components(mc_cdev, brightness);
+
+	r = mc_cdev->subled_info[0].brightness;
+	g = mc_cdev->subled_info[1].brightness;
+	b = mc_cdev->subled_info[2].brightness;
+
+	/*
+	 * Report layout (524 bytes):
+	 * Byte 0: Opcode (0x0c)
+	 * Byte 1: 0x00
+	 * Byte 2: Mode (0x66 for Keyboard, 0x06 for Lightbar)
+	 * Byte 3: 0x00
+	 * Bytes 4+: 4-byte chunks per LED (Index, R, G, B)
+	 */
+	memset(sd->rgb_buf, 0, STEELSERIES_MSI_RGB_REPORT_LEN);
+	sd->rgb_buf[0] = STEELSERIES_MSI_RGB_OPCODE;
+	sd->rgb_buf[1] = 0x00;
+	sd->rgb_buf[3] = 0x00;
+
+	for (i = 0; i < (STEELSERIES_MSI_RGB_REPORT_LEN - 4) / 4; i++)
+		sd->rgb_buf[4 + i * 4] = 0xff;
+
+	if (hdev->product == USB_DEVICE_ID_STEELSERIES_MSI_KLC) {
+		sd->rgb_buf[2] = STEELSERIES_MSI_RGB_KLC_MODE;
+		for (i = 0; i < ARRAY_SIZE(keys); i++) {
+			sd->rgb_buf[4 + i * 4] = keys[i];
+			sd->rgb_buf[5 + i * 4] = r;
+			sd->rgb_buf[6 + i * 4] = g;
+			sd->rgb_buf[7 + i * 4] = b;
+		}
+	} else {
+		sd->rgb_buf[2] = STEELSERIES_MSI_RGB_ALC_MODE;
+		for (i = 0; i < ARRAY_SIZE(alc_zones); i++) {
+			sd->rgb_buf[4 + i * 4] = alc_zones[i];
+			sd->rgb_buf[5 + i * 4] = r;
+			sd->rgb_buf[6 + i * 4] = g;
+			sd->rgb_buf[7 + i * 4] = b;
+		}
+	}
+
+	/*
+	 * Send the vendor report verbatim with usb_control_msg(): byte 0 is a
+	 * protocol opcode (0x0c), not a HID report ID, and the controller
+	 * expects it under report ID 0 (wValue 0x0300). hid_hw_raw_request()
+	 * would write the report number into byte 0, so the direct control
+	 * transfer is used to keep the payload byte-identical to the tested
+	 * userspace implementation.
+	 */
+	ret = hid_hw_power(hdev, PM_HINT_FULLON);
+	if (ret < 0)
+		goto out_unlock;
+
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			      HID_REQ_SET_REPORT,
+			      USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			      STEELSERIES_MSI_RGB_WVALUE, 0,
+			      sd->rgb_buf, STEELSERIES_MSI_RGB_REPORT_LEN,
+			      USB_CTRL_SET_TIMEOUT);
+
+	hid_hw_power(hdev, PM_HINT_NORMAL);
+
+out_unlock:
+	mutex_unlock(&sd->rgb_lock);
+	return ret < 0 ? ret : 0;
+}
+
+static void steelseries_msi_rgb_free_buf(void *data)
+{
+	kfree(data);
+}
+
+static int steelseries_msi_rgb_register(struct steelseries_device *sd)
+{
+	struct hid_device *hdev = sd->hdev;
+	struct led_classdev *led_cdev;
+	int ret;
+
+	sd->rgb_buf = kzalloc(STEELSERIES_MSI_RGB_REPORT_LEN, GFP_KERNEL);
+	if (!sd->rgb_buf)
+		return -ENOMEM;
+
+	ret = devm_add_action_or_reset(&hdev->dev,
+				       steelseries_msi_rgb_free_buf,
+				       sd->rgb_buf);
+	if (ret) {
+		sd->rgb_buf = NULL;
+		return ret;
+	}
+
+	ret = devm_mutex_init(&hdev->dev, &sd->rgb_lock);
+	if (ret) {
+		devm_remove_action(&hdev->dev, steelseries_msi_rgb_free_buf,
+				   sd->rgb_buf);
+		kfree(sd->rgb_buf);
+		sd->rgb_buf = NULL;
+		return ret;
+	}
+
+	sd->subled_info[0].color_index = LED_COLOR_ID_RED;
+	sd->subled_info[1].color_index = LED_COLOR_ID_GREEN;
+	sd->subled_info[2].color_index = LED_COLOR_ID_BLUE;
+	sd->subled_info[0].intensity = 255;
+	sd->subled_info[1].intensity = 255;
+	sd->subled_info[2].intensity = 255;
+	sd->subled_info[0].channel = 0;
+	sd->subled_info[1].channel = 1;
+	sd->subled_info[2].channel = 2;
+
+	sd->mc_cdev.subled_info = sd->subled_info;
+	sd->mc_cdev.num_colors = 3;
+
+	led_cdev = &sd->mc_cdev.led_cdev;
+	if (hdev->product == USB_DEVICE_ID_STEELSERIES_MSI_KLC)
+		led_cdev->name = "steelseries::kbd_backlight";
+	else
+		led_cdev->name = "steelseries::lightbar";
+
+	led_cdev->max_brightness = 255;
+	led_cdev->brightness_set_blocking = steelseries_msi_rgb_set_blocking;
+
+	ret = devm_led_classdev_multicolor_register(&hdev->dev, &sd->mc_cdev);
+	if (ret) {
+		devm_remove_action(&hdev->dev, steelseries_msi_rgb_free_buf,
+				   sd->rgb_buf);
+		kfree(sd->rgb_buf);
+		sd->rgb_buf = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+#else
+static int steelseries_msi_rgb_register(struct steelseries_device *sd)
+{
+	return -ENODEV;
+}
+#endif
+
+static int steelseries_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	struct steelseries_device *sd;
+	int ret;
+
+	if (hdev->product == USB_DEVICE_ID_STEELSERIES_SRWS1) {
+#if IS_BUILTIN(CONFIG_LEDS_CLASS) || \
+    (IS_MODULE(CONFIG_LEDS_CLASS) && IS_MODULE(CONFIG_HID_STEELSERIES))
+		return steelseries_srws1_probe(hdev, id);
+#else
+		return -ENODEV;
+#endif
+	}
+
+	sd = devm_kzalloc(&hdev->dev, sizeof(*sd), GFP_KERNEL);
+	if (!sd)
+		return -ENOMEM;
+	hid_set_drvdata(hdev, sd);
+	sd->hdev = hdev;
+	sd->quirks = id->driver_data;
+
+	if (sd->quirks & STEELSERIES_MSI_RGB) {
+		if (!dmi_check_system(steelseries_msi_rgb_dmi_table) ||
+		    !steelseries_msi_rgb_is_interface0(hdev)) {
+			hid_dbg(hdev, "MSI RGB quirk not applicable, using generic HID path\n");
+			sd->quirks &= ~STEELSERIES_MSI_RGB;
+		}
+	}
+
+	ret = hid_parse(hdev);
+	if (ret)
+		return ret;
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret)
+		return ret;
+
+	ret = hid_hw_open(hdev);
+	if (ret)
+		goto err_stop;
+
+	if (sd->quirks & STEELSERIES_MSI_RGB) {
+		ret = steelseries_msi_rgb_register(sd);
+		if (ret) {
+			hid_warn(hdev,
+				 "Failed to register MSI RGB LEDs: %d, continuing without RGB support\n",
+				 ret);
+			sd->quirks &= ~STEELSERIES_MSI_RGB;
+		}
+	}
+
+	return 0;
+
+err_stop:
+	hid_hw_stop(hdev);
+	return ret;
+}
+
+static void steelseries_remove(struct hid_device *hdev)
+{
+	if (hdev->product == USB_DEVICE_ID_STEELSERIES_SRWS1) {
+#if IS_BUILTIN(CONFIG_LEDS_CLASS) || \
+    (IS_MODULE(CONFIG_LEDS_CLASS) && IS_MODULE(CONFIG_HID_STEELSERIES))
+		hid_hw_stop(hdev);
+#endif
+		return;
+	}
+
+	hid_hw_close(hdev);
+	hid_hw_stop(hdev);
+}
+
+static const __u8 *steelseries_srws1_report_fixup(struct hid_device *hdev,
+		__u8 *rdesc, unsigned int *rsize)
+{
+	if (hdev->vendor != USB_VENDOR_ID_STEELSERIES ||
+	    hdev->product != USB_DEVICE_ID_STEELSERIES_SRWS1)
+		return rdesc;
+
+	if (*rsize >= 115 && rdesc[11] == 0x02 && rdesc[13] == 0xc8
+			&& rdesc[29] == 0xbb && rdesc[40] == 0xc5) {
+		hid_info(hdev, "Fixing up Steelseries SRW-S1 report descriptor\n");
+		*rsize = sizeof(steelseries_srws1_rdesc_fixed);
+		return steelseries_srws1_rdesc_fixed;
+	}
+	return rdesc;
+}
+
+static const struct hid_device_id steelseries_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_STEELSERIES, USB_DEVICE_ID_STEELSERIES_SRWS1),
+	  .driver_data = STEELSERIES_SRWS1 },
+
+#if STEELSERIES_HAS_LEDS_MULTICOLOR
+	{ /* MSI Raider A18 KLC */
+	  HID_USB_DEVICE(USB_VENDOR_ID_STEELSERIES, USB_DEVICE_ID_STEELSERIES_MSI_KLC),
+	  .driver_data = STEELSERIES_MSI_RGB },
+
+	{ /* MSI Raider A18 ALC */
+	  HID_USB_DEVICE(USB_VENDOR_ID_STEELSERIES, USB_DEVICE_ID_STEELSERIES_MSI_ALC),
+	  .driver_data = STEELSERIES_MSI_RGB },
+#endif
+
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, steelseries_devices);
+
+static struct hid_driver steelseries_driver = {
+	.name = "steelseries",
+	.id_table = steelseries_devices,
+	.probe = steelseries_probe,
+	.remove = steelseries_remove,
+	.report_fixup = steelseries_srws1_report_fixup,
+};
+
+module_hid_driver(steelseries_driver);
+MODULE_DESCRIPTION("HID driver for Steelseries devices");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Simon Wood <simon@mungewell.org>");