Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 101 insertions, 0 deletions

diff --git a/drivers/hid/hid-rapoo.c b/drivers/hid/hid-rapoo.c
new file mode 100644
index 000000000..5c9c396fa
--- /dev/null
+++ b/drivers/hid/hid-rapoo.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <asm-generic/errno-base.h>
+#include <asm-generic/int-ll64.h>
+#include <linux/bitops.h>
+#include <linux/input.h>
+#include <linux/input-event-codes.h>
+#include <linux/module.h>
+#include <linux/hid.h>
+#include <linux/usb.h>
+
+#include "hid-ids.h"
+
+#define RAPOO_BTN_BACK			0x08
+#define RAPOO_BTN_FORWARD		0x10
+
+static const struct hid_device_id rapoo_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_RAPOO, USB_DEVICE_ID_RAPOO_2_4G_RECEIVER) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, rapoo_devices);
+
+static int rapoo_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct input_dev *input;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "start failed\n");
+		return ret;
+	}
+
+	if (hid_is_usb(hdev)) {
+		struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+
+		if (intf->cur_altsetting->desc.bInterfaceNumber != 1)
+			return 0;
+	}
+
+	input = devm_input_allocate_device(&hdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = "Rapoo 2.4G Wireless Mouse";
+	input->phys = "rapoo/input1";
+	input->id.bustype = hdev->bus;
+	input->id.vendor = hdev->vendor;
+	input->id.product = hdev->product;
+	input->id.version = hdev->version;
+
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(KEY_BACK, input->keybit);
+	__set_bit(KEY_FORWARD, input->keybit);
+
+	ret = input_register_device(input);
+	if (ret)
+		return ret;
+
+	hid_set_drvdata(hdev, input);
+
+	return ret;
+}
+
+static int rapoo_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
+{
+	struct input_dev *input = hid_get_drvdata(hdev);
+
+	if (!input)
+		return 0;
+
+	if (report->id == 1 && size >= 2) {
+		u8 btn = data[1];
+
+		input_report_key(input, KEY_BACK, btn & RAPOO_BTN_BACK);
+		input_report_key(input, KEY_FORWARD, btn & RAPOO_BTN_FORWARD);
+		input_sync(input);
+		return 1;
+	}
+
+	return 0;
+}
+
+static struct hid_driver rapoo_driver = {
+	.name = "hid-rapoo",
+	.id_table = rapoo_devices,
+	.probe = rapoo_probe,
+	.raw_event = rapoo_raw_event,
+};
+
+module_hid_driver(rapoo_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nguyen Dinh Dang Duong <dangduong31205@gmail.com>");
+MODULE_DESCRIPTION("RAPOO 2.4G Wireless Device Driver");
+