drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 103 insertions, 0 deletions

diff --git a/drivers/hid/hid-picolcd_backlight.c b/drivers/hid/hid-picolcd_backlight.c
new file mode 100644
index 000000000..4b43b6453
--- /dev/null
+++ b/drivers/hid/hid-picolcd_backlight.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/***************************************************************************
+ *   Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org>  *
+ *                                                                         *
+ *   Based on Logitech G13 driver (v0.4)                                   *
+ *     Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu>   *
+ *                                                                         *
+ ***************************************************************************/
+
+#include <linux/hid.h>
+
+#include <linux/backlight.h>
+
+#include "hid-picolcd.h"
+
+static int picolcd_get_brightness(struct backlight_device *bdev)
+{
+	struct picolcd_data *data = bl_get_data(bdev);
+	return data->lcd_brightness;
+}
+
+static int picolcd_set_brightness(struct backlight_device *bdev)
+{
+	struct picolcd_data *data = bl_get_data(bdev);
+	struct hid_report *report = picolcd_out_report(REPORT_BRIGHTNESS, data->hdev);
+	unsigned long flags;
+
+	if (!report || report->maxfield != 1 || report->field[0]->report_count != 1)
+		return -ENODEV;
+
+	data->lcd_brightness = bdev->props.brightness & 0x0ff;
+	data->lcd_power      = bdev->props.power;
+	spin_lock_irqsave(&data->lock, flags);
+	hid_set_field(report->field[0], 0,
+		      data->lcd_power == BACKLIGHT_POWER_ON ? data->lcd_brightness : 0);
+	if (!(data->status & PICOLCD_FAILED))
+		hid_hw_request(data->hdev, report, HID_REQ_SET_REPORT);
+	spin_unlock_irqrestore(&data->lock, flags);
+	return 0;
+}
+
+static const struct backlight_ops picolcd_blops = {
+	.update_status  = picolcd_set_brightness,
+	.get_brightness = picolcd_get_brightness,
+};
+
+int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report)
+{
+	struct device *dev = &data->hdev->dev;
+	struct backlight_device *bdev;
+	struct backlight_properties props;
+	if (!report)
+		return -ENODEV;
+	if (report->maxfield != 1 || report->field[0]->report_count != 1 ||
+			report->field[0]->report_size != 8) {
+		dev_err(dev, "unsupported BRIGHTNESS report");
+		return -EINVAL;
+	}
+
+	memset(&props, 0, sizeof(props));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = 0xff;
+	bdev = backlight_device_register(dev_name(dev), dev, data,
+			&picolcd_blops, &props);
+	if (IS_ERR(bdev)) {
+		dev_err(dev, "failed to register backlight\n");
+		return PTR_ERR(bdev);
+	}
+	bdev->props.brightness     = 0xff;
+	data->lcd_brightness       = 0xff;
+	data->backlight            = bdev;
+	picolcd_set_brightness(bdev);
+	return 0;
+}
+
+void picolcd_exit_backlight(struct picolcd_data *data)
+{
+	struct backlight_device *bdev = data->backlight;
+
+	data->backlight = NULL;
+	backlight_device_unregister(bdev);
+}
+
+int picolcd_resume_backlight(struct picolcd_data *data)
+{
+	if (!data->backlight)
+		return 0;
+	return picolcd_set_brightness(data->backlight);
+}
+
+#ifdef CONFIG_PM
+void picolcd_suspend_backlight(struct picolcd_data *data)
+{
+	int bl_power = data->lcd_power;
+	if (!data->backlight)
+		return;
+
+	data->backlight->props.power = BACKLIGHT_POWER_OFF;
+	picolcd_set_brightness(data->backlight);
+	data->lcd_power = data->backlight->props.power = bl_power;
+}
+#endif /* CONFIG_PM */
+