arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted

__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.

Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.

Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

1 files changed, 147 insertions, 0 deletions

diff --git a/drivers/hid/hid-mf.c b/drivers/hid/hid-mf.c
new file mode 100644
index 000000000..136e8b41d
--- /dev/null
+++ b/drivers/hid/hid-mf.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Force feedback support for Mayflash game controller adapters.
+ *
+ * These devices are manufactured by Mayflash but identify themselves
+ * using the vendor ID of DragonRise Inc.
+ *
+ * Tested with:
+ * 0079:1801 "DragonRise Inc. Mayflash PS3 Game Controller Adapter"
+ * 0079:1803 "DragonRise Inc. Mayflash Wireless Sensor DolphinBar"
+ * 0079:1843 "DragonRise Inc. Mayflash GameCube Game Controller Adapter"
+ * 0079:1844 "DragonRise Inc. Mayflash GameCube Game Controller Adapter (v04)"
+ *
+ * The following adapters probably work too, but need to be tested:
+ * 0079:1800 "DragonRise Inc. Mayflash WIIU Game Controller Adapter"
+ *
+ * Copyright (c) 2016-2017 Marcel Hasler <mahasler@gmail.com>
+ */
+
+/*
+ */
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+struct mf_device {
+	struct hid_report *report;
+};
+
+static int mf_play(struct input_dev *dev, void *data, struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct mf_device *mf = data;
+	int strong, weak;
+
+	strong = effect->u.rumble.strong_magnitude;
+	weak = effect->u.rumble.weak_magnitude;
+
+	dbg_hid("Called with 0x%04x 0x%04x.\n", strong, weak);
+
+	strong = strong * 0xff / 0xffff;
+	weak = weak * 0xff / 0xffff;
+
+	dbg_hid("Running with 0x%02x 0x%02x.\n", strong, weak);
+
+	mf->report->field[0]->value[0] = weak;
+	mf->report->field[0]->value[1] = strong;
+	hid_hw_request(hid, mf->report, HID_REQ_SET_REPORT);
+
+	return 0;
+}
+
+static int mf_input_configured(struct hid_device *hid, struct hid_input *hidinput)
+{
+	struct mf_device *mf;
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct hid_report *report;
+	struct input_dev *dev = hidinput->input;
+	int error;
+
+	if (!list_is_first(&hidinput->list, &hid->inputs))
+		return 0;
+
+	report = list_first_entry_or_null(report_list, struct hid_report, list);
+	if (!report) {
+		hid_err(hid, "no output reports found\n");
+		return -ENODEV;
+	}
+
+	if (report->maxfield < 1 || report->field[0]->report_count < 2) {
+		hid_err(hid, "Invalid report, this should never happen!\n");
+		return -ENODEV;
+	}
+
+	mf = kzalloc_obj(struct mf_device);
+	if (!mf)
+		return -ENOMEM;
+
+	mf->report = report;
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	error = input_ff_create_memless(dev, mf, mf_play);
+	if (error) {
+		kfree(mf);
+		return error;
+	}
+
+	mf->report->field[0]->value[0] = 0x00;
+	mf->report->field[0]->value[1] = 0x00;
+	hid_hw_request(hid, mf->report, HID_REQ_SET_REPORT);
+
+	return 0;
+}
+
+static int mf_probe(struct hid_device *hid, const struct hid_device_id *id)
+{
+	int error;
+
+	dev_dbg(&hid->dev, "Mayflash HID hardware probe...\n");
+
+	/* Apply quirks as needed */
+	hid->quirks |= id->driver_data;
+
+	error = hid_parse(hid);
+	if (error) {
+		hid_err(hid, "HID parse failed.\n");
+		return error;
+	}
+
+	error = hid_hw_start(hid, HID_CONNECT_DEFAULT);
+	if (error) {
+		hid_err(hid, "HID hw start failed\n");
+		return error;
+	}
+
+	return 0;
+}
+static const struct hid_device_id mf_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3),
+		.driver_data = HID_QUIRK_MULTI_INPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR),
+		.driver_data = HID_QUIRK_MULTI_INPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE1),
+		.driver_data = HID_QUIRK_MULTI_INPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE2),
+		.driver_data = 0 }, /* No quirk required */
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE3),
+		.driver_data = HID_QUIRK_MULTI_INPUT },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, mf_devices);
+
+static struct hid_driver mf_driver = {
+	.name = "hid_mf",
+	.id_table = mf_devices,
+	.probe = mf_probe,
+	.input_configured = mf_input_configured,
+};
+module_hid_driver(mf_driver);
+
+MODULE_DESCRIPTION("Force feedback support for Mayflash game controller adapters.");
+MODULE_LICENSE("GPL");