drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 148 insertions, 0 deletions

diff --git a/drivers/hid/hid-ite.c b/drivers/hid/hid-ite.c
new file mode 100644
index 000000000..63908f24b
--- /dev/null
+++ b/drivers/hid/hid-ite.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HID driver for some ITE "special" devices
+ * Copyright (c) 2017 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+#define QUIRK_TOUCHPAD_ON_OFF_REPORT		BIT(0)
+
+static const __u8 *ite_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize)
+{
+
+	const struct hid_device_id *id = hid_get_drvdata(hdev);
+	unsigned long quirks = id->driver_data;
+
+	if (quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) {
+		/* For Acer Aspire Switch 10 SW5-012 keyboard-dock */
+		if (*rsize == 188 && rdesc[162] == 0x81 && rdesc[163] == 0x02) {
+			hid_info(hdev, "Fixing up Acer Sw5-012 ITE keyboard report descriptor\n");
+			rdesc[163] = HID_MAIN_ITEM_RELATIVE;
+		}
+		/* For Acer One S1002/S1003 keyboard-dock */
+		if (*rsize == 188 && rdesc[185] == 0x81 && rdesc[186] == 0x02) {
+			hid_info(hdev, "Fixing up Acer S1002/S1003 ITE keyboard report descriptor\n");
+			rdesc[186] = HID_MAIN_ITEM_RELATIVE;
+		}
+		/* For Acer Aspire Switch 10E (SW3-016) keyboard-dock */
+		if (*rsize == 210 && rdesc[184] == 0x81 && rdesc[185] == 0x02) {
+			hid_info(hdev, "Fixing up Acer Aspire Switch 10E (SW3-016) ITE keyboard report descriptor\n");
+			rdesc[185] = HID_MAIN_ITEM_RELATIVE;
+		}
+	}
+
+	return rdesc;
+}
+
+static int ite_input_mapping(struct hid_device *hdev,
+		struct hid_input *hi, struct hid_field *field,
+		struct hid_usage *usage, unsigned long **bit,
+		int *max)
+{
+
+	const struct hid_device_id *id = hid_get_drvdata(hdev);
+	unsigned long quirks = id->driver_data;
+
+	if ((quirks & QUIRK_TOUCHPAD_ON_OFF_REPORT) &&
+	    (usage->hid & HID_USAGE_PAGE) == 0x00880000) {
+		if (usage->hid == 0x00880078) {
+			/* Touchpad on, userspace expects F22 for this */
+			hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_F22);
+			return 1;
+		}
+		if (usage->hid == 0x00880079) {
+			/* Touchpad off, userspace expects F23 for this */
+			hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_F23);
+			return 1;
+		}
+		return -1;
+	}
+
+	return 0;
+}
+
+static int ite_event(struct hid_device *hdev, struct hid_field *field,
+		     struct hid_usage *usage, __s32 value)
+{
+	struct input_dev *input;
+
+	if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput)
+		return 0;
+
+	input = field->hidinput->input;
+
+	/*
+	 * The ITE8595 always reports 0 as value for the rfkill button. Luckily
+	 * it is the only button in its report, and it sends a report on
+	 * release only, so receiving a report means the button was pressed.
+	 */
+	if (usage->hid == HID_GD_RFKILL_BTN) {
+		input_event(input, EV_KEY, KEY_RFKILL, 1);
+		input_sync(input);
+		input_event(input, EV_KEY, KEY_RFKILL, 0);
+		input_sync(input);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int ite_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	hid_set_drvdata(hdev, (void *)id);
+
+	ret = hid_open_report(hdev);
+	if (ret)
+		return ret;
+
+	return hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+}
+
+static const struct hid_device_id ite_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ITE, USB_DEVICE_ID_ITE8595) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_258A, USB_DEVICE_ID_258A_6A88) },
+	/* ITE8595 USB kbd ctlr, with Synaptics touchpad connected to it. */
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_SYNAPTICS,
+		     USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_012),
+	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
+	/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_SYNAPTICS,
+		     USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1002),
+	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
+	/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_SYNAPTICS,
+		     USB_DEVICE_ID_SYNAPTICS_ACER_ONE_S1003),
+	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
+	/* ITE8910 USB kbd ctlr, with Synaptics touchpad connected to it. */
+	{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+		     USB_VENDOR_ID_SYNAPTICS,
+		     USB_DEVICE_ID_SYNAPTICS_ACER_SWITCH5_017),
+	  .driver_data = QUIRK_TOUCHPAD_ON_OFF_REPORT },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, ite_devices);
+
+static struct hid_driver ite_driver = {
+	.name = "itetech",
+	.id_table = ite_devices,
+	.probe = ite_probe,
+	.report_fixup = ite_report_fixup,
+	.input_mapping = ite_input_mapping,
+	.event = ite_event,
+};
+module_hid_driver(ite_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("HID driver for some ITE \"special\" devices");
+MODULE_LICENSE("GPL");