drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 191 insertions, 0 deletions

diff --git a/drivers/hid/hid-holtekff.c b/drivers/hid/hid-holtekff.c
new file mode 100644
index 000000000..4834d42b2
--- /dev/null
+++ b/drivers/hid/hid-holtekff.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Force feedback support for Holtek On Line Grip based gamepads
+ *
+ *  These include at least a Brazilian "Clone Joypad Super Power Fire"
+ *  which uses vendor ID 0x1241 and identifies as "HOLTEK On Line Grip".
+ *
+ *  Copyright (c) 2011 Anssi Hannula <anssi.hannula@iki.fi>
+ */
+
+/*
+ */
+
+#include <linux/hid.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "hid-ids.h"
+
+#ifdef CONFIG_HOLTEK_FF
+
+/*
+ * These commands and parameters are currently known:
+ *
+ * byte 0: command id:
+ * 	01  set effect parameters
+ * 	02  play specified effect
+ * 	03  stop specified effect
+ * 	04  stop all effects
+ * 	06  stop all effects
+ * 	(the difference between 04 and 06 isn't known; win driver
+ * 	 sends 06,04 on application init, and 06 otherwise)
+ * 
+ * Commands 01 and 02 need to be sent as pairs, i.e. you need to send 01
+ * before each 02.
+ *
+ * The rest of the bytes are parameters. Command 01 takes all of them, and
+ * commands 02,03 take only the effect id.
+ *
+ * byte 1:
+ *	bits 0-3: effect id:
+ * 		1: very strong rumble
+ * 		2: periodic rumble, short intervals
+ * 		3: very strong rumble
+ * 		4: periodic rumble, long intervals
+ * 		5: weak periodic rumble, long intervals
+ * 		6: weak periodic rumble, short intervals
+ * 		7: periodic rumble, short intervals
+ * 		8: strong periodic rumble, short intervals
+ * 		9: very strong rumble
+ * 		a: causes an error
+ * 		b: very strong periodic rumble, very short intervals
+ * 		c-f: nothing
+ *	bit 6: right (weak) motor enabled
+ *	bit 7: left (strong) motor enabled
+ *
+ * bytes 2-3:  time in milliseconds, big-endian
+ * bytes 5-6:  unknown (win driver seems to use at least 10e0 with effect 1
+ * 		       and 0014 with effect 6)
+ * byte 7:
+ *	bits 0-3: effect magnitude
+ */
+
+#define HOLTEKFF_MSG_LENGTH     7
+
+static const u8 start_effect_1[] = { 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 };
+static const u8 stop_all4[] =	   { 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+static const u8 stop_all6[] =	   { 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+struct holtekff_device {
+	struct hid_field *field;
+};
+
+static void holtekff_send(struct holtekff_device *holtekff,
+			  struct hid_device *hid,
+			  const u8 data[HOLTEKFF_MSG_LENGTH])
+{
+	int i;
+
+	for (i = 0; i < HOLTEKFF_MSG_LENGTH; i++) {
+		holtekff->field->value[i] = data[i];
+	}
+
+	dbg_hid("sending %7ph\n", data);
+
+	hid_hw_request(hid, holtekff->field->report, HID_REQ_SET_REPORT);
+}
+
+static int holtekff_play(struct input_dev *dev, void *data,
+			 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct holtekff_device *holtekff = data;
+	int left, right;
+	/* effect type 1, length 65535 msec */
+	u8 buf[HOLTEKFF_MSG_LENGTH] =
+		{ 0x01, 0x01, 0xff, 0xff, 0x10, 0xe0, 0x00 };
+
+	left = effect->u.rumble.strong_magnitude;
+	right = effect->u.rumble.weak_magnitude;
+	dbg_hid("called with 0x%04x 0x%04x\n", left, right);
+
+	if (!left && !right) {
+		holtekff_send(holtekff, hid, stop_all6);
+		return 0;
+	}
+
+	if (left)
+		buf[1] |= 0x80;
+	if (right)
+		buf[1] |= 0x40;
+
+	/* The device takes a single magnitude, so we just sum them up. */
+	buf[6] = min(0xf, (left >> 12) + (right >> 12));
+
+	holtekff_send(holtekff, hid, buf);
+	holtekff_send(holtekff, hid, start_effect_1);
+
+	return 0;
+}
+
+static int holtek_input_configured(struct hid_device *hid, struct hid_input *hidinput)
+{
+	struct holtekff_device *holtekff;
+	struct hid_report *report;
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct input_dev *dev = hidinput->input;
+	int error;
+
+	if (!list_is_first(&hidinput->list, &hid->inputs))
+		return 0;
+
+	report = list_first_entry_or_null(report_list, struct hid_report, list);
+	if (!report) {
+		hid_err(hid, "no output report found\n");
+		return -ENODEV;
+	}
+
+	if (report->maxfield < 1 || report->field[0]->report_count != 7) {
+		hid_err(hid, "unexpected output report layout\n");
+		return -ENODEV;
+	}
+
+	holtekff = kzalloc_obj(*holtekff);
+	if (!holtekff)
+		return -ENOMEM;
+
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	holtekff->field = report->field[0];
+
+	/* initialize the same way as win driver does */
+	holtekff_send(holtekff, hid, stop_all4);
+	holtekff_send(holtekff, hid, stop_all6);
+
+	error = input_ff_create_memless(dev, holtekff, holtekff_play);
+	if (error) {
+		kfree(holtekff);
+		return error;
+	}
+
+	hid_info(hid, "Force feedback for Holtek On Line Grip based devices by Anssi Hannula <anssi.hannula@iki.fi>\n");
+
+	return 0;
+}
+#else
+static inline int holtek_input_configured(struct hid_device *hid,
+					  struct hid_input *hidinput)
+{
+	return 0;
+}
+#endif
+
+static const struct hid_device_id holtek_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, holtek_devices);
+
+static struct hid_driver holtek_driver = {
+	.name = "holtek",
+	.id_table = holtek_devices,
+	.input_configured = holtek_input_configured,
+};
+module_hid_driver(holtek_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anssi Hannula <anssi.hannula@iki.fi>");
+MODULE_DESCRIPTION("Force feedback support for Holtek On Line Grip based devices");