drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 140 insertions, 0 deletions

diff --git a/drivers/hid/hid-gaff.c b/drivers/hid/hid-gaff.c
new file mode 100644
index 000000000..ec793a179
--- /dev/null
+++ b/drivers/hid/hid-gaff.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Force feedback support for GreenAsia (Product ID 0x12) based devices
+ *
+ *  The devices are distributed under various names and the same USB device ID
+ *  can be used in many game controllers.
+ *
+ *  0e8f:0012 "GreenAsia Inc.    USB Joystick     "
+ *   - tested with MANTA Warior MM816 and SpeedLink Strike2 SL-6635.
+ *
+ *  Copyright (c) 2008 Lukasz Lubojanski <lukasz@lubojanski.info>
+ */
+
+/*
+ */
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include "hid-ids.h"
+
+#ifdef CONFIG_GREENASIA_FF
+
+struct gaff_device {
+	struct hid_report *report;
+};
+
+static int hid_gaff_play(struct input_dev *dev, void *data,
+			 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct gaff_device *gaff = data;
+	int left, right;
+
+	left = effect->u.rumble.strong_magnitude;
+	right = effect->u.rumble.weak_magnitude;
+
+	dbg_hid("called with 0x%04x 0x%04x", left, right);
+
+	left = left * 0xfe / 0xffff;
+	right = right * 0xfe / 0xffff;
+
+	gaff->report->field[0]->value[0] = 0x51;
+	gaff->report->field[0]->value[1] = 0x0;
+	gaff->report->field[0]->value[2] = right;
+	gaff->report->field[0]->value[3] = 0;
+	gaff->report->field[0]->value[4] = left;
+	gaff->report->field[0]->value[5] = 0;
+	dbg_hid("running with 0x%02x 0x%02x", left, right);
+	hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
+
+	gaff->report->field[0]->value[0] = 0xfa;
+	gaff->report->field[0]->value[1] = 0xfe;
+	gaff->report->field[0]->value[2] = 0x0;
+	gaff->report->field[0]->value[4] = 0x0;
+
+	hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
+
+	return 0;
+}
+
+static int gaff_input_configured(struct hid_device *hid, struct hid_input *hidinput)
+{
+	struct gaff_device *gaff;
+	struct hid_report *report;
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct input_dev *dev = hidinput->input;
+	int error;
+
+	if (!list_is_first(&hidinput->list, &hid->inputs))
+		return 0;
+
+	report = list_first_entry_or_null(report_list, struct hid_report, list);
+	if (!report) {
+		hid_err(hid, "no output reports found\n");
+		return -ENODEV;
+	}
+	if (report->maxfield < 1) {
+		hid_err(hid, "no fields in the report\n");
+		return -ENODEV;
+	}
+
+	if (report->field[0]->report_count < 6) {
+		hid_err(hid, "not enough values in the field\n");
+		return -ENODEV;
+	}
+
+	gaff = kzalloc_obj(struct gaff_device);
+	if (!gaff)
+		return -ENOMEM;
+
+	gaff->report = report;
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	error = input_ff_create_memless(dev, gaff, hid_gaff_play);
+	if (error) {
+		kfree(gaff);
+		return error;
+	}
+
+	gaff->report->field[0]->value[0] = 0x51;
+	gaff->report->field[0]->value[1] = 0x00;
+	gaff->report->field[0]->value[2] = 0x00;
+	gaff->report->field[0]->value[3] = 0x00;
+	hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
+
+	gaff->report->field[0]->value[0] = 0xfa;
+	gaff->report->field[0]->value[1] = 0xfe;
+
+	hid_hw_request(hid, gaff->report, HID_REQ_SET_REPORT);
+
+	hid_info(hid, "Force Feedback for GreenAsia 0x12 devices by Lukasz Lubojanski <lukasz@lubojanski.info>\n");
+
+	return 0;
+}
+#else
+static inline int gaff_input_configured(struct hid_device *hdev,
+					struct hid_input *hidinput)
+{
+	return 0;
+}
+#endif
+
+static const struct hid_device_id ga_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012),  },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, ga_devices);
+
+static struct hid_driver ga_driver = {
+	.name = "greenasia",
+	.id_table = ga_devices,
+	.input_configured = gaff_input_configured,
+};
+module_hid_driver(ga_driver);
+
+MODULE_DESCRIPTION("Force feedback support for GreenAsia (Product ID 0x12) based devices");
+MODULE_LICENSE("GPL");