scftorture: Count single_rpc offline failures in statistics outputgrafted

scf_torture_stats_print() aggregates each invoker thread's counters
into a local scf_statistics structure before printing, but the
n_single_rpc_ofl field is missing from the aggregation loop.  As a
result, the "single_rpc_ofl" value printed in the statistics line is
always zero, even when smp_call_function_single() invocations for the
RPC test have failed due to offline CPUs and been counted by the
invoker threads.

Add the missing accumulation so that the printed value reflects the
actual counts.

Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

1 files changed, 320 insertions, 0 deletions

diff --git a/drivers/hid/hid-dr.c b/drivers/hid/hid-dr.c
new file mode 100644
index 000000000..8a8f68a7f
--- /dev/null
+++ b/drivers/hid/hid-dr.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Force feedback support for DragonRise Inc. game controllers
+ *
+ * From what I have gathered, these devices are mass produced in China and are
+ * distributed under several vendors. They often share the same design as
+ * the original PlayStation DualShock controller.
+ *
+ * 0079:0006 "DragonRise Inc.   Generic   USB  Joystick  "
+ *  - tested with a Tesun USB-703 game controller.
+ *
+ * Copyright (c) 2009 Richard Walmsley <richwalm@gmail.com>
+ */
+
+/*
+ */
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+#ifdef CONFIG_DRAGONRISE_FF
+
+struct drff_device {
+	struct hid_report *report;
+};
+
+static int drff_play(struct input_dev *dev, void *data,
+				 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct drff_device *drff = data;
+	int strong, weak;
+
+	strong = effect->u.rumble.strong_magnitude;
+	weak = effect->u.rumble.weak_magnitude;
+
+	dbg_hid("called with 0x%04x 0x%04x", strong, weak);
+
+	if (strong || weak) {
+		strong = strong * 0xff / 0xffff;
+		weak = weak * 0xff / 0xffff;
+
+		/* While reverse engineering this device, I found that when
+		   this value is set, it causes the strong rumble to function
+		   at a near maximum speed, so we'll bypass it. */
+		if (weak == 0x0a)
+			weak = 0x0b;
+
+		drff->report->field[0]->value[0] = 0x51;
+		drff->report->field[0]->value[1] = 0x00;
+		drff->report->field[0]->value[2] = weak;
+		drff->report->field[0]->value[4] = strong;
+		hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
+
+		drff->report->field[0]->value[0] = 0xfa;
+		drff->report->field[0]->value[1] = 0xfe;
+	} else {
+		drff->report->field[0]->value[0] = 0xf3;
+		drff->report->field[0]->value[1] = 0x00;
+	}
+
+	drff->report->field[0]->value[2] = 0x00;
+	drff->report->field[0]->value[4] = 0x00;
+	dbg_hid("running with 0x%02x 0x%02x", strong, weak);
+	hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
+
+	return 0;
+}
+
+static int drff_init(struct hid_device *hid)
+{
+	struct drff_device *drff;
+	struct hid_report *report;
+	struct hid_input *hidinput;
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct input_dev *dev;
+	int error;
+
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_first_entry(&hid->inputs, struct hid_input, list);
+	dev = hidinput->input;
+
+	if (list_empty(report_list)) {
+		hid_err(hid, "no output reports found\n");
+		return -ENODEV;
+	}
+
+	report = list_first_entry(report_list, struct hid_report, list);
+	if (report->maxfield < 1) {
+		hid_err(hid, "no fields in the report\n");
+		return -ENODEV;
+	}
+
+	if (report->field[0]->report_count < 7) {
+		hid_err(hid, "not enough values in the field\n");
+		return -ENODEV;
+	}
+
+	drff = kzalloc_obj(struct drff_device);
+	if (!drff)
+		return -ENOMEM;
+
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	error = input_ff_create_memless(dev, drff, drff_play);
+	if (error) {
+		kfree(drff);
+		return error;
+	}
+
+	drff->report = report;
+	drff->report->field[0]->value[0] = 0xf3;
+	drff->report->field[0]->value[1] = 0x00;
+	drff->report->field[0]->value[2] = 0x00;
+	drff->report->field[0]->value[3] = 0x00;
+	drff->report->field[0]->value[4] = 0x00;
+	drff->report->field[0]->value[5] = 0x00;
+	drff->report->field[0]->value[6] = 0x00;
+	hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
+
+	hid_info(hid, "Force Feedback for DragonRise Inc. "
+		 "game controllers by Richard Walmsley <richwalm@gmail.com>\n");
+
+	return 0;
+}
+#else
+static inline int drff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
+
+/*
+ * The original descriptor of joystick with PID 0x0011, represented by DVTech PC
+ * JS19. It seems both copied from another device and a result of confusion
+ * either about the specification or about the program used to create the
+ * descriptor. In any case, it's a wonder it works on Windows.
+ *
+ *  Usage Page (Desktop),             ; Generic desktop controls (01h)
+ *  Usage (Joystick),                 ; Joystick (04h, application collection)
+ *  Collection (Application),
+ *    Collection (Logical),
+ *      Report Size (8),
+ *      Report Count (5),
+ *      Logical Minimum (0),
+ *      Logical Maximum (255),
+ *      Physical Minimum (0),
+ *      Physical Maximum (255),
+ *      Usage (X),                    ; X (30h, dynamic value)
+ *      Usage (X),                    ; X (30h, dynamic value)
+ *      Usage (X),                    ; X (30h, dynamic value)
+ *      Usage (X),                    ; X (30h, dynamic value)
+ *      Usage (Y),                    ; Y (31h, dynamic value)
+ *      Input (Variable),
+ *      Report Size (4),
+ *      Report Count (1),
+ *      Logical Maximum (7),
+ *      Physical Maximum (315),
+ *      Unit (Degrees),
+ *      Usage (00h),
+ *      Input (Variable, Null State),
+ *      Unit,
+ *      Report Size (1),
+ *      Report Count (10),
+ *      Logical Maximum (1),
+ *      Physical Maximum (1),
+ *      Usage Page (Button),          ; Button (09h)
+ *      Usage Minimum (01h),
+ *      Usage Maximum (0Ah),
+ *      Input (Variable),
+ *      Usage Page (FF00h),           ; FF00h, vendor-defined
+ *      Report Size (1),
+ *      Report Count (10),
+ *      Logical Maximum (1),
+ *      Physical Maximum (1),
+ *      Usage (01h),
+ *      Input (Variable),
+ *    End Collection,
+ *    Collection (Logical),
+ *      Report Size (8),
+ *      Report Count (4),
+ *      Physical Maximum (255),
+ *      Logical Maximum (255),
+ *      Usage (02h),
+ *      Output (Variable),
+ *    End Collection,
+ *  End Collection
+ */
+
+/* Size of the original descriptor of the PID 0x0011 joystick */
+#define PID0011_RDESC_ORIG_SIZE	101
+
+/* Fixed report descriptor for PID 0x011 joystick */
+static const __u8 pid0011_rdesc_fixed[] = {
+	0x05, 0x01,         /*  Usage Page (Desktop),           */
+	0x09, 0x04,         /*  Usage (Joystick),               */
+	0xA1, 0x01,         /*  Collection (Application),       */
+	0xA1, 0x02,         /*      Collection (Logical),       */
+	0x14,               /*          Logical Minimum (0),    */
+	0x75, 0x08,         /*          Report Size (8),        */
+	0x95, 0x03,         /*          Report Count (3),       */
+	0x81, 0x01,         /*          Input (Constant),       */
+	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
+	0x95, 0x02,         /*          Report Count (2),       */
+	0x09, 0x30,         /*          Usage (X),              */
+	0x09, 0x31,         /*          Usage (Y),              */
+	0x81, 0x02,         /*          Input (Variable),       */
+	0x75, 0x01,         /*          Report Size (1),        */
+	0x95, 0x04,         /*          Report Count (4),       */
+	0x81, 0x01,         /*          Input (Constant),       */
+	0x25, 0x01,         /*          Logical Maximum (1),    */
+	0x95, 0x0A,         /*          Report Count (10),      */
+	0x05, 0x09,         /*          Usage Page (Button),    */
+	0x19, 0x01,         /*          Usage Minimum (01h),    */
+	0x29, 0x0A,         /*          Usage Maximum (0Ah),    */
+	0x81, 0x02,         /*          Input (Variable),       */
+	0x95, 0x0A,         /*          Report Count (10),      */
+	0x81, 0x01,         /*          Input (Constant),       */
+	0xC0,               /*      End Collection,             */
+	0xC0                /*  End Collection                  */
+};
+
+static const __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+				   unsigned int *rsize)
+{
+	switch (hdev->product) {
+	case 0x0011:
+		if (*rsize == PID0011_RDESC_ORIG_SIZE) {
+			*rsize = sizeof(pid0011_rdesc_fixed);
+			return pid0011_rdesc_fixed;
+		}
+		break;
+	}
+	return rdesc;
+}
+
+#define map_abs(c)      hid_map_usage(hi, usage, bit, max, EV_ABS, (c))
+#define map_rel(c)      hid_map_usage(hi, usage, bit, max, EV_REL, (c))
+
+static int dr_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+			    struct hid_field *field, struct hid_usage *usage,
+			    unsigned long **bit, int *max)
+{
+	switch (usage->hid) {
+	/*
+	 * revert to the old hid-input behavior where axes
+	 * can be randomly assigned when hid->usage is reused.
+	 */
+	case HID_GD_X: case HID_GD_Y: case HID_GD_Z:
+	case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ:
+		if (field->flags & HID_MAIN_ITEM_RELATIVE)
+			map_rel(usage->hid & 0xf);
+		else
+			map_abs(usage->hid & 0xf);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	dev_dbg(&hdev->dev, "DragonRise Inc. HID hardware probe...");
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		goto err;
+	}
+
+	switch (hdev->product) {
+	case 0x0006:
+		ret = drff_init(hdev);
+		if (ret) {
+			dev_err(&hdev->dev, "force feedback init failed\n");
+			hid_hw_stop(hdev);
+			goto err;
+		}
+		break;
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+static const struct hid_device_id dr_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006),  },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011),  },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, dr_devices);
+
+static struct hid_driver dr_driver = {
+	.name = "dragonrise",
+	.id_table = dr_devices,
+	.report_fixup = dr_report_fixup,
+	.probe = dr_probe,
+	.input_mapping = dr_input_mapping,
+};
+module_hid_driver(dr_driver);
+
+MODULE_DESCRIPTION("Force feedback support for DragonRise Inc. game controllers");
+MODULE_LICENSE("GPL");