Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 195 insertions, 0 deletions

diff --git a/drivers/gpu/host1x/mipi.c b/drivers/gpu/host1x/mipi.c
new file mode 100644
index 000000000..988681423
--- /dev/null
+++ b/drivers/gpu/host1x/mipi.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 NVIDIA Corporation
+ * Copyright (C) 2025 Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/tegra-mipi-cal.h>
+
+/* only need to support one provider */
+static struct {
+	struct device_node *np;
+	const struct tegra_mipi_ops *ops;
+} provider;
+
+/**
+ * tegra_mipi_enable - Enable the Tegra MIPI calibration device.
+ * @device: Handle to the Tegra MIPI calibration device.
+ *
+ * This calls the enable sequence for the Tegra MIPI calibration device.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int tegra_mipi_enable(struct tegra_mipi_device *device)
+{
+	if (device->ops->enable)
+		return device->ops->enable(device);
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_mipi_enable);
+
+/**
+ * tegra_mipi_disable - Disable the Tegra MIPI calibration device.
+ * @device: Handle to the Tegra MIPI calibration device.
+ *
+ * This calls the disable sequence for the Tegra MIPI calibration device.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int tegra_mipi_disable(struct tegra_mipi_device *device)
+{
+	if (device->ops->disable)
+		return device->ops->disable(device);
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_mipi_disable);
+
+/**
+ * tegra_mipi_start_calibration - Start the Tegra MIPI calibration sequence.
+ * @device: Handle to the Tegra MIPI calibration device.
+ *
+ * This initiates the calibration of CSI/DSI interfaces via the Tegra MIPI
+ * calibration device.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int tegra_mipi_start_calibration(struct tegra_mipi_device *device)
+{
+	if (device->ops->start_calibration)
+		return device->ops->start_calibration(device);
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_mipi_start_calibration);
+
+/**
+ * tegra_mipi_finish_calibration - Finish the Tegra MIPI calibration sequence.
+ * @device: Handle to the Tegra MIPI calibration device.
+ *
+ * This completes the calibration of CSI/DSI interfaces via the Tegra MIPI
+ * calibration device.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int tegra_mipi_finish_calibration(struct tegra_mipi_device *device)
+{
+	if (device->ops->finish_calibration)
+		return device->ops->finish_calibration(device);
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_mipi_finish_calibration);
+
+/**
+ * tegra_mipi_request - Request a Tegra MIPI calibration device.
+ * @device: Handle of the device requesting the MIPI calibration function.
+ * @np: Device node pointer of the device requesting the MIPI calibration
+ *	function.
+ *
+ * This function requests a reference to a Tegra MIPI calibration device.
+ *
+ * Returns a pointer to the Tegra MIPI calibration device on success,
+ * or an ERR_PTR-encoded error code on failure.
+ */
+struct tegra_mipi_device *tegra_mipi_request(struct device *device,
+					     struct device_node *np)
+{
+	struct tegra_mipi_device *mipidev;
+	struct of_phandle_args args;
+	int err;
+
+	err = of_parse_phandle_with_args(np, "nvidia,mipi-calibrate",
+					 "#nvidia,mipi-calibrate-cells", 0,
+					 &args);
+	if (err < 0)
+		return ERR_PTR(err);
+
+	if (provider.np != args.np) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	mipidev = kzalloc_obj(*mipidev);
+	if (!mipidev) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	mipidev->pdev = of_find_device_by_node(args.np);
+	if (!mipidev->pdev) {
+		err = -ENODEV;
+		goto free;
+	}
+
+	of_node_put(args.np);
+
+	mipidev->ops = provider.ops;
+	mipidev->pads = args.args[0];
+
+	return mipidev;
+
+free:
+	kfree(mipidev);
+out:
+	of_node_put(args.np);
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL(tegra_mipi_request);
+
+/**
+ * tegra_mipi_free - Free a Tegra MIPI calibration device.
+ * @mipidev: Handle to the Tegra MIPI calibration device.
+ *
+ * This function releases a reference to a Tegra MIPI calibration device
+ * previously requested by tegra_mipi_request().
+ */
+void tegra_mipi_free(struct tegra_mipi_device *mipidev)
+{
+	platform_device_put(mipidev->pdev);
+	kfree(mipidev);
+}
+EXPORT_SYMBOL(tegra_mipi_free);
+
+static void tegra_mipi_remove_provider(void *data)
+{
+	provider.np = NULL;
+	provider.ops = NULL;
+}
+
+/**
+ * devm_tegra_mipi_add_provider - Managed registration of a Tegra MIPI
+ *				  calibration function provider.
+ * @device: Handle to the device providing the MIPI calibration function.
+ * @np: Device node pointer of the device providing the MIPI calibration
+ *	function.
+ * @ops: Operations supported by the MIPI calibration device.
+ *
+ * This registers a device that provides MIPI calibration functions.
+ * For Tegra20 and Tegra30, this is the CSI block, while Tegra114 and
+ * newer SoC generations have a dedicated hardware block for these
+ * functions.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int devm_tegra_mipi_add_provider(struct device *device, struct device_node *np,
+				 const struct tegra_mipi_ops *ops)
+{
+	if (provider.np)
+		return -EBUSY;
+
+	provider.np = np;
+	provider.ops = ops;
+
+	return devm_add_action_or_reset(device, tegra_mipi_remove_provider, NULL);
+}
+EXPORT_SYMBOL(devm_tegra_mipi_add_provider);