ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 372 insertions, 0 deletions

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
new file mode 100644
index 000000000..323422861
--- /dev/null
+++ b/drivers/gpu/drm/Kconfig
@@ -0,0 +1,372 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Drm device configuration
+#
+# This driver provides support for the
+# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+#
+menuconfig DRM
+	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
+	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
+	select DRM_PANEL_ORIENTATION_QUIRKS
+	select HDMI
+	select I2C
+	select DMA_SHARED_BUFFER
+	select SYNC_FILE
+# gallium uses SYS_kcmp for os_same_file_description() to de-duplicate
+# device and dmabuf fd. Let's make sure that is available for our userspace.
+	select KCMP
+	select VIDEO
+	help
+	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
+	  introduced in XFree86 4.0. If you say Y here, you need to select
+	  the module that's right for your graphics card from the list below.
+	  These modules provide support for synchronization, security, and
+	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
+	  details.  You should also select and configure AGP
+	  (/dev/agpgart) support if it is available for your platform.
+
+menu "DRM debugging options"
+depends on DRM
+source "drivers/gpu/drm/Kconfig.debug"
+endmenu
+
+if DRM
+
+config DRM_MIPI_DBI
+	tristate
+	depends on DRM
+	select DRM_KMS_HELPER
+
+config DRM_MIPI_DSI
+	bool
+	depends on DRM
+
+config DRM_KMS_HELPER
+	tristate
+	depends on DRM
+	select FB_CORE if DRM_FBDEV_EMULATION
+	help
+	  CRTC helpers for KMS drivers.
+
+config DRM_DRAW
+	bool
+	depends on DRM
+
+config DRM_PANIC
+	bool "Display a user-friendly message when a kernel panic occurs"
+	depends on DRM && PRINTK
+	select FONT_SUPPORT
+	select DRM_DRAW
+	help
+	  Enable a drm panic handler, which will display a user-friendly message
+	  when a kernel panic occurs. It's useful when using a user-space
+	  console instead of fbcon.
+	  It will only work if your graphic driver supports this feature.
+	  To support Hi-DPI Display, you can enable bigger fonts like
+	  FONT_TER16x32
+
+config DRM_PANIC_FOREGROUND_COLOR
+	hex "Drm panic screen foreground color, in RGB"
+	depends on DRM_PANIC
+	default 0xffffff
+
+config DRM_PANIC_BACKGROUND_COLOR
+	hex "Drm panic screen background color, in RGB"
+	depends on DRM_PANIC
+	default 0x000000
+
+config DRM_PANIC_DEBUG
+	bool "Add a debug fs entry to trigger drm_panic"
+	depends on DRM_PANIC && DEBUG_FS
+	help
+	  Add dri/[device]/drm_panic_plane_x in the kernel debugfs, to force the
+	  panic handler to write the panic message to this plane scanout buffer.
+	  This is unsafe and should not be enabled on a production build.
+	  If in doubt, say "N".
+
+config DRM_PANIC_SCREEN
+	string "Panic screen formatter"
+	default "user"
+	depends on DRM_PANIC
+	help
+	  This option enable to choose what will be displayed when a kernel
+	  panic occurs. You can choose between "user", a short message telling
+	  the user to reboot the system, or "kmsg" which will display the last
+	  lines of kmsg.
+	  This can also be overridden by drm.panic_screen=xxxx kernel parameter
+	  or by writing to /sys/module/drm/parameters/panic_screen sysfs entry
+	  Default is "user"
+
+config DRM_PANIC_SCREEN_QR_CODE
+	bool "Add a panic screen with a QR code"
+	depends on DRM_PANIC && RUST
+	select ZLIB_DEFLATE
+	help
+	  This option adds a QR code generator, and a panic screen with a QR
+	  code. The QR code will contain the last lines of kmsg and other debug
+	  information. This should be easier for the user to report a kernel
+	  panic, with all debug information available.
+	  To use this panic screen, also set DRM_PANIC_SCREEN to "qr_code"
+
+config DRM_PANIC_SCREEN_QR_CODE_URL
+	string "Base URL of the QR code in the panic screen"
+	depends on DRM_PANIC_SCREEN_QR_CODE
+	help
+	  This option sets the base URL to report the kernel panic. If it's set
+	  the QR code will contain the URL and the kmsg compressed with zlib as
+	  a URL parameter. If it's empty, the QR code will contain the kmsg as
+	  uncompressed text only.
+	  There is a demo code in javascript, to decode and uncompress the kmsg
+	  data from the URL parameter at https://github.com/kdj0c/panic_report
+
+config DRM_PANIC_SCREEN_QR_VERSION
+	int "Maximum version (size) of the QR code."
+	depends on DRM_PANIC_SCREEN_QR_CODE
+	default 40
+	help
+	  This option limits the version (or size) of the QR code. QR code
+	  version ranges from Version 1 (21x21) to Version 40 (177x177).
+	  Smaller QR code are easier to read, but will contain less debugging
+	  data. Default is 40.
+
+config DRM_RAS
+	bool "DRM RAS support"
+	depends on DRM
+	depends on NET
+	help
+	  Enables the DRM RAS (Reliability, Availability and Serviceability)
+	  support for DRM drivers. This provides a Generic Netlink interface
+	  for error reporting and queries.
+	  If in doubt, say "N".
+
+config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
+        bool "Enable refcount backtrace history in the DP MST helpers"
+	depends on STACKTRACE_SUPPORT
+        select STACKDEPOT
+        select DRM_KMS_HELPER
+        depends on DEBUG_KERNEL
+        depends on EXPERT
+        help
+          Enables debug tracing for topology refs in DRM's DP MST helpers. A
+          history of each topology reference/dereference will be printed to the
+          kernel log once a port or branch device's topology refcount reaches 0.
+
+          This has the potential to use a lot of memory and print some very
+          large kernel messages. If in doubt, say "N".
+
+config DRM_DEBUG_MODESET_LOCK
+	bool "Enable backtrace history for lock contention"
+	depends on STACKTRACE_SUPPORT
+	depends on DEBUG_KERNEL
+	depends on EXPERT
+	select STACKDEPOT
+	default y if DEBUG_WW_MUTEX_SLOWPATH
+	help
+	  Enable debug tracing of failures to gracefully handle drm modeset lock
+	  contention. A history of each drm modeset lock path hitting -EDEADLK
+	  will be saved until gracefully handled, and the backtrace will be
+	  printed when attempting to lock a contended lock.
+
+	  If in doubt, say "N".
+
+config DRM_CLIENT
+	bool
+	depends on DRM
+	help
+	  Enables support for DRM clients. DRM drivers that need
+	  struct drm_client_dev and its interfaces should select this
+	  option. Drivers that support the default clients should
+	  select DRM_CLIENT_SELECTION instead.
+
+source "drivers/gpu/drm/clients/Kconfig"
+
+config DRM_LOAD_EDID_FIRMWARE
+	bool "Allow to specify an EDID data set instead of probing for it"
+	depends on DRM
+	help
+	  Say Y here, if you want to use EDID data to be loaded from the
+	  /lib/firmware directory or one of the provided built-in
+	  data sets. This may be necessary, if the graphics adapter or
+	  monitor are unable to provide appropriate EDID data. Since this
+	  feature is provided as a workaround for broken hardware, the
+	  default case is N. Details and instructions how to build your own
+	  EDID data are given in Documentation/admin-guide/edid.rst.
+
+source "drivers/gpu/drm/display/Kconfig"
+
+config DRM_TTM
+	tristate
+	depends on DRM && MMU
+	select SHMEM
+	help
+	  GPU memory management subsystem for devices with multiple
+	  GPU memory types. Will be enabled automatically if a device driver
+	  uses it.
+
+config DRM_EXEC
+	tristate
+	depends on DRM
+	help
+	  Execution context for command submissions
+
+config DRM_GPUVM
+	tristate
+	depends on DRM
+	select DRM_EXEC
+	help
+	  GPU-VM representation providing helpers to manage a GPUs virtual
+	  address space
+
+config RUST_DRM_GPUVM
+	bool
+	depends on DRM
+	select DRM_GPUVM
+	help
+	  Choose this if you need GPUVM functions in Rust
+
+config DRM_GPUSVM
+	tristate
+	depends on DRM
+	select HMM_MIRROR
+	select MMU_NOTIFIER
+	help
+	  GPU-SVM representation providing helpers to manage a GPUs shared
+	  virtual memory
+
+config DRM_BUDDY
+	tristate
+	depends on DRM
+	select GPU_BUDDY
+	help
+	  A page based buddy allocator
+
+config DRM_VRAM_HELPER
+	tristate
+	depends on DRM
+	help
+	  Helpers for VRAM memory management
+
+config DRM_TTM_HELPER
+	tristate
+	depends on DRM
+	select DRM_TTM
+	select DRM_KMS_HELPER if DRM_FBDEV_EMULATION
+	select FB_CORE if DRM_FBDEV_EMULATION
+	select FB_SYSMEM_HELPERS_DEFERRED if DRM_FBDEV_EMULATION
+	help
+	  Helpers for ttm-based gem objects
+
+config DRM_GEM_DMA_HELPER
+	tristate
+	depends on DRM
+	select DRM_KMS_HELPER if DRM_FBDEV_EMULATION
+	select FB_CORE if DRM_FBDEV_EMULATION
+	select FB_DMAMEM_HELPERS_DEFERRED if DRM_FBDEV_EMULATION
+	help
+	  Choose this if you need the GEM DMA helper functions
+
+config DRM_GEM_SHMEM_HELPER
+	tristate
+	depends on DRM && MMU
+	select DRM_KMS_HELPER if DRM_FBDEV_EMULATION
+	select FB_CORE if DRM_FBDEV_EMULATION
+	select FB_SYSMEM_HELPERS_DEFERRED if DRM_FBDEV_EMULATION
+	help
+	  Choose this if you need the GEM shmem helper functions
+
+config RUST_DRM_GEM_SHMEM_HELPER
+	bool
+	depends on DRM && MMU
+	select DRM_GEM_SHMEM_HELPER
+	help
+	  Choose this if you need the GEM shmem helper functions In Rust
+
+config DRM_SUBALLOC_HELPER
+	tristate
+	depends on DRM
+
+config DRM_SCHED
+	tristate
+	depends on DRM
+
+# Separate option as not all DRM drivers use it
+config DRM_PANEL_BACKLIGHT_QUIRKS
+	tristate
+
+config DRM_PRIVACY_SCREEN
+	bool
+	default n
+
+# DRM driver Kconfig files, sorted
+source "drivers/gpu/drm/adp/Kconfig"
+source "drivers/gpu/drm/amd/amdgpu/Kconfig"
+source "drivers/gpu/drm/arm/Kconfig"
+source "drivers/gpu/drm/armada/Kconfig"
+source "drivers/gpu/drm/aspeed/Kconfig"
+source "drivers/gpu/drm/ast/Kconfig"
+source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
+source "drivers/gpu/drm/bridge/Kconfig"
+source "drivers/gpu/drm/etnaviv/Kconfig"
+source "drivers/gpu/drm/exynos/Kconfig"
+source "drivers/gpu/drm/fsl-dcu/Kconfig"
+source "drivers/gpu/drm/gma500/Kconfig"
+source "drivers/gpu/drm/gud/Kconfig"
+source "drivers/gpu/drm/hisilicon/Kconfig"
+source "drivers/gpu/drm/hyperv/Kconfig"
+source "drivers/gpu/drm/i915/Kconfig"
+source "drivers/gpu/drm/imagination/Kconfig"
+source "drivers/gpu/drm/imx/Kconfig"
+source "drivers/gpu/drm/ingenic/Kconfig"
+source "drivers/gpu/drm/kmb/Kconfig"
+source "drivers/gpu/drm/lima/Kconfig"
+source "drivers/gpu/drm/logicvc/Kconfig"
+source "drivers/gpu/drm/loongson/Kconfig"
+source "drivers/gpu/drm/mcde/Kconfig"
+source "drivers/gpu/drm/mediatek/Kconfig"
+source "drivers/gpu/drm/meson/Kconfig"
+source "drivers/gpu/drm/mgag200/Kconfig"
+source "drivers/gpu/drm/msm/Kconfig"
+source "drivers/gpu/drm/mxsfb/Kconfig"
+source "drivers/gpu/drm/nouveau/Kconfig"
+source "drivers/gpu/drm/nova/Kconfig"
+source "drivers/gpu/drm/omapdrm/Kconfig"
+source "drivers/gpu/drm/panel/Kconfig"
+source "drivers/gpu/drm/panfrost/Kconfig"
+source "drivers/gpu/drm/panthor/Kconfig"
+source "drivers/gpu/drm/pl111/Kconfig"
+source "drivers/gpu/drm/qxl/Kconfig"
+source "drivers/gpu/drm/radeon/Kconfig"
+source "drivers/gpu/drm/renesas/Kconfig"
+source "drivers/gpu/drm/rockchip/Kconfig"
+source "drivers/gpu/drm/sitronix/Kconfig"
+source "drivers/gpu/drm/solomon/Kconfig"
+source "drivers/gpu/drm/sprd/Kconfig"
+source "drivers/gpu/drm/sti/Kconfig"
+source "drivers/gpu/drm/stm/Kconfig"
+source "drivers/gpu/drm/sun4i/Kconfig"
+source "drivers/gpu/drm/sysfb/Kconfig"
+source "drivers/gpu/drm/tegra/Kconfig"
+source "drivers/gpu/drm/tidss/Kconfig"
+source "drivers/gpu/drm/tilcdc/Kconfig"
+source "drivers/gpu/drm/tiny/Kconfig"
+source "drivers/gpu/drm/tve200/Kconfig"
+source "drivers/gpu/drm/tyr/Kconfig"
+source "drivers/gpu/drm/udl/Kconfig"
+source "drivers/gpu/drm/v3d/Kconfig"
+source "drivers/gpu/drm/vboxvideo/Kconfig"
+source "drivers/gpu/drm/vc4/Kconfig"
+source "drivers/gpu/drm/verisilicon/Kconfig"
+source "drivers/gpu/drm/vgem/Kconfig"
+source "drivers/gpu/drm/virtio/Kconfig"
+source "drivers/gpu/drm/vkms/Kconfig"
+source "drivers/gpu/drm/vmwgfx/Kconfig"
+source "drivers/gpu/drm/xe/Kconfig"
+source "drivers/gpu/drm/xen/Kconfig"
+source "drivers/gpu/drm/xlnx/Kconfig"
+
+endif
+
+# Separate option because drm_panel_orientation_quirks.c is shared with fbdev
+config DRM_PANEL_ORIENTATION_QUIRKS
+	tristate