Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 66 insertions, 0 deletions

diff --git a/drivers/gpu/Makefile b/drivers/gpu/Makefile
new file mode 100644
index 000000000..e372fc021
--- /dev/null
+++ b/drivers/gpu/Makefile
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# drm/tegra depends on host1x, so if both drivers are built-in care must be
+# taken to initialize them in the correct order. Link order is the only way
+# to ensure this currently.
+# Similarly, buddy must come first since it is used by other drivers.
+obj-$(CONFIG_GPU_BUDDY)	+= buddy.o
+obj-y			+= host1x/ drm/ vga/ tests/
+obj-$(CONFIG_IMX_IPUV3_CORE)	+= ipu-v3/
+obj-$(CONFIG_TRACE_GPU_MEM)		+= trace/
+
+# nova-core and nova-drm are built from this Makefile so nova-drm's dependency
+# on nova-core can be expressed as a plain Make prerequisite rather than a
+# recursive sub-make. This is a temporary workaround until the Rust build
+# system supports cross-crate dependencies natively.
+
+obj-$(CONFIG_NOVA_CORE) += nova-core.o
+nova-core-y := nova-core/nova_core.o nova-core/nova_core_exports.o
+
+obj-$(CONFIG_DRM_NOVA) += nova-drm.o
+nova-drm-y := drm/nova/nova.o
+
+# Export Rust symbols from nova-core only if nova-drm actually references them.
+nova-core-export-deps := $(if $(CONFIG_DRM_NOVA),$(obj)/drm/nova/nova.o)
+
+rust_needed_exports = \
+	{ $(if $(strip $(2)),$(NM) -u $(2);,) echo "__DEFINED_RUST_SYMBOLS__"; \
+	  $(NM) -p --defined-only $(1); } | \
+	awk -v fmt='$(3)' ' \
+		/^__DEFINED_RUST_SYMBOLS__$$/ { defs = 1; next } \
+		!defs { if ($$NF ~ /^_R/) needed[$$NF] = 1; next } \
+		defs && $$2 ~ /(T|R|D|B)/ && $$3 ~ /^_R/ && \
+			$$3 !~ /_(init|cleanup)_module$$/ && \
+			$$3 !~ /__(pfx|cfi|odr_asan)/ && \
+			$$3 in needed { printf fmt, $$3 } \
+	'
+
+quiet_cmd_exports = EXPORTS $@
+      cmd_exports = \
+	$(call rust_needed_exports,$<,$(nova-core-export-deps),EXPORT_SYMBOL_RUST_GPL(%s);\n) > $@
+
+$(obj)/nova-core/exports_nova_core_generated.h: $(obj)/nova-core/nova_core.o $(nova-core-export-deps) FORCE
+	$(call if_changed,exports)
+
+targets += nova-core/exports_nova_core_generated.h
+
+$(obj)/nova-core/nova_core_exports.o: $(obj)/nova-core/exports_nova_core_generated.h
+CFLAGS_nova-core/nova_core_exports.o := -I $(objtree)/$(obj)/nova-core
+
+ifdef CONFIG_MODVERSIONS
+# The C export shim declares Rust symbols as `extern int`, so reuse its export
+# list but generate symbol CRCs from the Rust object instead of the shim's DWARF.
+$(obj)/nova-core/nova_core_exports.o: private cmd_gensymtypes_c = \
+	$(call getexportsymbols,\1) | \
+	$(objtree)/scripts/gendwarfksyms/gendwarfksyms \
+		$(if $(KBUILD_GENDWARFKSYMS_STABLE), --stable) \
+		$(if $(KBUILD_SYMTYPES), --symtypes $(@:.o=.symtypes),) \
+		$(obj)/nova-core/nova_core.o
+endif
+
+# Output nova-core's crate metadata for use by nova-drm at compile time.
+RUSTFLAGS_nova-core/nova_core.o += \
+	--emit=metadata=$(objtree)/$(obj)/nova-core/libnova_core.rmeta
+
+# Allow nova-drm to import nova-core's types.
+$(obj)/drm/nova/nova.o: $(obj)/nova-core/nova_core.o
+RUSTFLAGS_drm/nova/nova.o := -L $(objtree)/$(obj)/nova-core --extern nova_core