Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 381 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-pmic-eic-sprd.c b/drivers/gpio/gpio-pmic-eic-sprd.c
new file mode 100644
index 000000000..cb015fb5c
--- /dev/null
+++ b/drivers/gpio/gpio-pmic-eic-sprd.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ * Copyright (C) 2018 Linaro Ltd.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* EIC registers definition */
+#define SPRD_PMIC_EIC_DATA		0x0
+#define SPRD_PMIC_EIC_DMSK		0x4
+#define SPRD_PMIC_EIC_IEV		0x14
+#define SPRD_PMIC_EIC_IE		0x18
+#define SPRD_PMIC_EIC_RIS		0x1c
+#define SPRD_PMIC_EIC_MIS		0x20
+#define SPRD_PMIC_EIC_IC		0x24
+#define SPRD_PMIC_EIC_TRIG		0x28
+#define SPRD_PMIC_EIC_CTRL0		0x40
+
+/*
+ * The PMIC EIC controller only has one bank, and each bank now can contain
+ * 16 EICs.
+ */
+#define SPRD_PMIC_EIC_PER_BANK_NR	16
+#define SPRD_PMIC_EIC_NR		SPRD_PMIC_EIC_PER_BANK_NR
+#define SPRD_PMIC_EIC_DATA_MASK		GENMASK(15, 0)
+#define SPRD_PMIC_EIC_BIT(x)		((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1))
+#define SPRD_PMIC_EIC_DBNC_MASK		GENMASK(11, 0)
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum {
+	REG_IEV,
+	REG_IE,
+	REG_TRIG,
+	CACHE_NR_REGS
+};
+
+/**
+ * struct sprd_pmic_eic - PMIC EIC controller
+ * @chip: the gpio_chip structure.
+ * @map:  the regmap from the parent device.
+ * @offset: the EIC controller's offset address of the PMIC.
+ * @reg: the array to cache the EIC registers.
+ * @buslock: for bus lock/sync and unlock.
+ * @irq: the interrupt number of the PMIC EIC conteroller.
+ */
+struct sprd_pmic_eic {
+	struct gpio_chip chip;
+	struct regmap *map;
+	u32 offset;
+	u8 reg[CACHE_NR_REGS];
+	struct mutex buslock;
+	int irq;
+};
+
+static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset,
+				 u16 reg, unsigned int val)
+{
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 shift = SPRD_PMIC_EIC_BIT(offset);
+
+	regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg,
+			   BIT(shift), val << shift);
+}
+
+static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset,
+			      u16 reg)
+{
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 value;
+	int ret;
+
+	ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
+	if (ret)
+		return ret;
+
+	return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset)));
+}
+
+static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset)
+{
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1);
+	return 0;
+}
+
+static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset)
+{
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0);
+}
+
+static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset)
+{
+	return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA);
+}
+
+static int sprd_pmic_eic_direction_input(struct gpio_chip *chip,
+					 unsigned int offset)
+{
+	/* EICs are always input, nothing need to do here. */
+	return 0;
+}
+
+static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip,
+				      unsigned int offset,
+				      unsigned int debounce)
+{
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 reg, value;
+	int ret;
+
+	reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4;
+	ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
+	if (ret)
+		return ret;
+
+	value &= ~SPRD_PMIC_EIC_DBNC_MASK;
+	value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK;
+	return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value);
+}
+
+static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset,
+				    unsigned long config)
+{
+	unsigned long param = pinconf_to_config_param(config);
+	u32 arg = pinconf_to_config_argument(config);
+
+	if (param == PIN_CONFIG_INPUT_DEBOUNCE)
+		return sprd_pmic_eic_set_debounce(chip, offset, arg);
+
+	return -ENOTSUPP;
+}
+
+static void sprd_pmic_eic_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 offset = irqd_to_hwirq(data);
+
+	pmic_eic->reg[REG_IE] &= ~BIT(offset);
+	pmic_eic->reg[REG_TRIG] &= ~BIT(offset);
+
+	gpiochip_disable_irq(chip, offset);
+}
+
+static void sprd_pmic_eic_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 offset = irqd_to_hwirq(data);
+
+	gpiochip_enable_irq(chip, offset);
+
+	pmic_eic->reg[REG_IE] |= BIT(offset);
+	pmic_eic->reg[REG_TRIG] |= BIT(offset);
+}
+
+static int sprd_pmic_eic_irq_set_type(struct irq_data *data,
+				      unsigned int flow_type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 offset = irqd_to_hwirq(data);
+
+	switch (flow_type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		pmic_eic->reg[REG_IEV] |= BIT(offset);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		pmic_eic->reg[REG_IEV] &= ~BIT(offset);
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_EDGE_BOTH:
+		/*
+		 * Will set the trigger level according to current EIC level
+		 * in irq_bus_sync_unlock() interface, so here nothing to do.
+		 */
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static void sprd_pmic_eic_bus_lock(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+
+	mutex_lock(&pmic_eic->buslock);
+}
+
+static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 trigger = irqd_get_trigger_type(data);
+	u32 offset = irqd_to_hwirq(data);
+	int state;
+
+	/* Set irq type */
+	if (trigger & IRQ_TYPE_EDGE_BOTH) {
+		state = sprd_pmic_eic_get(chip, offset);
+		if (state)
+			sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0);
+		else
+			sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1);
+	} else {
+		sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV,
+				     !!(pmic_eic->reg[REG_IEV] & BIT(offset)));
+	}
+
+	/* Set irq unmask */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE,
+			     !!(pmic_eic->reg[REG_IE] & BIT(offset)));
+	/* Generate trigger start pulse for debounce EIC */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG,
+			     !!(pmic_eic->reg[REG_TRIG] & BIT(offset)));
+
+	mutex_unlock(&pmic_eic->buslock);
+}
+
+static void sprd_pmic_eic_toggle_trigger(struct gpio_chip *chip,
+					 unsigned int irq, unsigned int offset)
+{
+	u32 trigger = irq_get_trigger_type(irq);
+	int state, post_state;
+
+	if (!(trigger & IRQ_TYPE_EDGE_BOTH))
+		return;
+
+	state = sprd_pmic_eic_get(chip, offset);
+retry:
+	if (state)
+		sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0);
+	else
+		sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1);
+
+	post_state = sprd_pmic_eic_get(chip, offset);
+	if (state != post_state) {
+		dev_warn(chip->parent, "PMIC EIC level was changed.\n");
+		state = post_state;
+		goto retry;
+	}
+
+	/* Set irq unmask */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, 1);
+	/* Generate trigger start pulse for debounce EIC */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, 1);
+}
+
+static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data)
+{
+	struct sprd_pmic_eic *pmic_eic = data;
+	struct gpio_chip *chip = &pmic_eic->chip;
+	unsigned long status;
+	u32 n, girq, val;
+	int ret;
+
+	ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS,
+			  &val);
+	if (ret)
+		return IRQ_RETVAL(ret);
+
+	status = val & SPRD_PMIC_EIC_DATA_MASK;
+
+	for_each_set_bit(n, &status, chip->ngpio) {
+		/* Clear the interrupt */
+		sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1);
+
+		girq = irq_find_mapping(chip->irq.domain, n);
+		handle_nested_irq(girq);
+
+		/*
+		 * The PMIC EIC can only support level trigger, so we can
+		 * toggle the level trigger to emulate the edge trigger.
+		 */
+		sprd_pmic_eic_toggle_trigger(chip, girq, n);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static const struct irq_chip pmic_eic_irq_chip = {
+	.name			= "sprd-pmic-eic",
+	.irq_mask		= sprd_pmic_eic_irq_mask,
+	.irq_unmask		= sprd_pmic_eic_irq_unmask,
+	.irq_set_type		= sprd_pmic_eic_irq_set_type,
+	.irq_bus_lock		= sprd_pmic_eic_bus_lock,
+	.irq_bus_sync_unlock	= sprd_pmic_eic_bus_sync_unlock,
+	.flags			= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_IMMUTABLE,
+	GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
+static int sprd_pmic_eic_probe(struct platform_device *pdev)
+{
+	struct gpio_irq_chip *irq;
+	struct sprd_pmic_eic *pmic_eic;
+	int ret;
+
+	pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL);
+	if (!pmic_eic)
+		return -ENOMEM;
+
+	mutex_init(&pmic_eic->buslock);
+
+	pmic_eic->irq = platform_get_irq(pdev, 0);
+	if (pmic_eic->irq < 0)
+		return pmic_eic->irq;
+
+	pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!pmic_eic->map)
+		return -ENODEV;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL,
+					sprd_pmic_eic_irq_handler,
+					IRQF_ONESHOT | IRQF_NO_SUSPEND,
+					dev_name(&pdev->dev), pmic_eic);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n");
+		return ret;
+	}
+
+	pmic_eic->chip.label = dev_name(&pdev->dev);
+	pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR;
+	pmic_eic->chip.base = -1;
+	pmic_eic->chip.parent = &pdev->dev;
+	pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input;
+	pmic_eic->chip.request = sprd_pmic_eic_request;
+	pmic_eic->chip.free = sprd_pmic_eic_free;
+	pmic_eic->chip.set_config = sprd_pmic_eic_set_config;
+	pmic_eic->chip.get = sprd_pmic_eic_get;
+	pmic_eic->chip.can_sleep = true;
+
+	irq = &pmic_eic->chip.irq;
+	gpio_irq_chip_set_chip(irq, &pmic_eic_irq_chip);
+	irq->threaded = true;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sprd_pmic_eic_of_match[] = {
+	{ .compatible = "sprd,sc2731-eic", },
+	{ /* end of list */ }
+};
+MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match);
+
+static struct platform_driver sprd_pmic_eic_driver = {
+	.probe = sprd_pmic_eic_probe,
+	.driver = {
+		.name = "sprd-pmic-eic",
+		.of_match_table	= sprd_pmic_eic_of_match,
+	},
+};
+
+module_platform_driver(sprd_pmic_eic_driver);
+
+MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver");
+MODULE_LICENSE("GPL v2");