x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 152 insertions, 0 deletions

diff --git a/drivers/gnss/mtk.c b/drivers/gnss/mtk.c
new file mode 100644
index 000000000..c62b1211f
--- /dev/null
+++ b/drivers/gnss/mtk.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mediatek GNSS receiver driver
+ *
+ * Copyright (C) 2018 Johan Hovold <johan@kernel.org>
+ */
+
+#include <linux/errno.h>
+#include <linux/gnss.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/serdev.h>
+
+#include "serial.h"
+
+struct mtk_data {
+	struct regulator *vbackup;
+	struct regulator *vcc;
+};
+
+static int mtk_set_active(struct gnss_serial *gserial)
+{
+	struct mtk_data *data = gnss_serial_get_drvdata(gserial);
+	int ret;
+
+	ret = regulator_enable(data->vcc);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mtk_set_standby(struct gnss_serial *gserial)
+{
+	struct mtk_data *data = gnss_serial_get_drvdata(gserial);
+	int ret;
+
+	ret = regulator_disable(data->vcc);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mtk_set_power(struct gnss_serial *gserial,
+			 enum gnss_serial_pm_state state)
+{
+	switch (state) {
+	case GNSS_SERIAL_ACTIVE:
+		return mtk_set_active(gserial);
+	case GNSS_SERIAL_OFF:
+	case GNSS_SERIAL_STANDBY:
+		return mtk_set_standby(gserial);
+	}
+
+	return -EINVAL;
+}
+
+static const struct gnss_serial_ops mtk_gserial_ops = {
+	.set_power = mtk_set_power,
+};
+
+static int mtk_probe(struct serdev_device *serdev)
+{
+	struct gnss_serial *gserial;
+	struct mtk_data *data;
+	int ret;
+
+	gserial = gnss_serial_allocate(serdev, sizeof(*data));
+	if (IS_ERR(gserial)) {
+		ret = PTR_ERR(gserial);
+		return ret;
+	}
+
+	gserial->ops = &mtk_gserial_ops;
+
+	gserial->gdev->type = GNSS_TYPE_MTK;
+
+	data = gnss_serial_get_drvdata(gserial);
+
+	data->vcc = devm_regulator_get(&serdev->dev, "vcc");
+	if (IS_ERR(data->vcc)) {
+		ret = PTR_ERR(data->vcc);
+		goto err_free_gserial;
+	}
+
+	data->vbackup = devm_regulator_get_optional(&serdev->dev, "vbackup");
+	if (IS_ERR(data->vbackup)) {
+		ret = PTR_ERR(data->vbackup);
+		if (ret == -ENODEV)
+			data->vbackup = NULL;
+		else
+			goto err_free_gserial;
+	}
+
+	if (data->vbackup) {
+		ret = regulator_enable(data->vbackup);
+		if (ret)
+			goto err_free_gserial;
+	}
+
+	ret = gnss_serial_register(gserial);
+	if (ret)
+		goto err_disable_vbackup;
+
+	return 0;
+
+err_disable_vbackup:
+	if (data->vbackup)
+		regulator_disable(data->vbackup);
+err_free_gserial:
+	gnss_serial_free(gserial);
+
+	return ret;
+}
+
+static void mtk_remove(struct serdev_device *serdev)
+{
+	struct gnss_serial *gserial = serdev_device_get_drvdata(serdev);
+	struct mtk_data *data = gnss_serial_get_drvdata(gserial);
+
+	gnss_serial_deregister(gserial);
+	if (data->vbackup)
+		regulator_disable(data->vbackup);
+	gnss_serial_free(gserial);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mtk_of_match[] = {
+	{ .compatible = "globaltop,pa6h" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_of_match);
+#endif
+
+static struct serdev_device_driver mtk_driver = {
+	.driver	= {
+		.name		= "gnss-mtk",
+		.of_match_table	= of_match_ptr(mtk_of_match),
+		.pm		= &gnss_serial_pm_ops,
+	},
+	.probe	= mtk_probe,
+	.remove	= mtk_remove,
+};
+module_serdev_device_driver(mtk_driver);
+
+MODULE_AUTHOR("Loys Ollivier <lollivier@baylibre.com>");
+MODULE_DESCRIPTION("Mediatek GNSS receiver driver");
+MODULE_LICENSE("GPL v2");