staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 63 insertions, 0 deletions

diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
new file mode 100644
index 000000000..6f5798b27
--- /dev/null
+++ b/drivers/fpga/Makefile
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the fpga framework and fpga manager drivers.
+#
+
+# Core FPGA Manager Framework
+obj-$(CONFIG_FPGA)			+= fpga-mgr.o
+
+# FPGA Manager Drivers
+obj-$(CONFIG_FPGA_MGR_ALTERA_CVP)	+= altera-cvp.o
+obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI)	+= altera-ps-spi.o
+obj-$(CONFIG_FPGA_MGR_ICE40_SPI)	+= ice40-spi.o
+obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI)	+= machxo2-spi.o
+obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
+obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10)	+= socfpga-a10.o
+obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC)	+= stratix10-soc.o
+obj-$(CONFIG_FPGA_MGR_TS73XX)		+= ts73xx-fpga.o
+obj-$(CONFIG_FPGA_MGR_XILINX_CORE)	+= xilinx-core.o
+obj-$(CONFIG_FPGA_MGR_XILINX_SELECTMAP)	+= xilinx-selectmap.o
+obj-$(CONFIG_FPGA_MGR_XILINX_SPI)	+= xilinx-spi.o
+obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
+obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA)	+= zynqmp-fpga.o
+obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA)	+= versal-fpga.o
+obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI)	+= microchip-spi.o
+obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG)	+= lattice-sysconfig.o
+obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG_SPI)	+= lattice-sysconfig-spi.o
+obj-$(CONFIG_ALTERA_PR_IP_CORE)		+= altera-pr-ip-core.o
+obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT)	+= altera-pr-ip-core-plat.o
+obj-$(CONFIG_FPGA_MGR_EFINIX_SPI)	+= efinix-spi.o
+
+# FPGA Secure Update Drivers
+obj-$(CONFIG_FPGA_M10_BMC_SEC_UPDATE)	+= intel-m10-bmc-sec-update.o
+
+# FPGA Bridge Drivers
+obj-$(CONFIG_FPGA_BRIDGE)		+= fpga-bridge.o
+obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE)	+= altera-hps2fpga.o altera-fpga2sdram.o
+obj-$(CONFIG_ALTERA_FREEZE_BRIDGE)	+= altera-freeze-bridge.o
+obj-$(CONFIG_XILINX_PR_DECOUPLER)	+= xilinx-pr-decoupler.o
+
+# High Level Interfaces
+obj-$(CONFIG_FPGA_REGION)		+= fpga-region.o
+obj-$(CONFIG_OF_FPGA_REGION)		+= of-fpga-region.o
+
+# FPGA Device Feature List Support
+obj-$(CONFIG_FPGA_DFL)			+= dfl.o
+obj-$(CONFIG_FPGA_DFL_FME)		+= dfl-fme.o
+obj-$(CONFIG_FPGA_DFL_FME_MGR)		+= dfl-fme-mgr.o
+obj-$(CONFIG_FPGA_DFL_FME_BRIDGE)	+= dfl-fme-br.o
+obj-$(CONFIG_FPGA_DFL_FME_REGION)	+= dfl-fme-region.o
+obj-$(CONFIG_FPGA_DFL_AFU)		+= dfl-afu.o
+
+dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o dfl-fme-error.o
+dfl-fme-objs += dfl-fme-perf.o
+dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
+dfl-afu-objs += dfl-afu-error.o
+
+obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000)	+= dfl-n3000-nios.o
+
+# Drivers for FPGAs which implement DFL
+obj-$(CONFIG_FPGA_DFL_PCI)		+= dfl-pci.o
+
+# KUnit tests
+obj-$(CONFIG_FPGA_KUNIT_TESTS)		+= tests/