selftests/bpf: Test packet range of pointers sharing an idgrafted

Add tests where two packet pointers share an id and tightening one
pointer's umax from its var_off would put it less than their constant
distance from the other's umax: with an index & 0x38 capped at 50, the
base pointer keeps umax 50, so the pointer 8 bytes further on must keep
umax 58, even though its known bits allow at most 56.

These refused a valid program or accepted an out-of-bounds access before
the fix:

- check the advanced copy, load through the base: valid, was refused;
- check the base, load the byte at base + 1 through a copy advanced by
  8: was accepted;
- check base + 4, load 4 bytes at base + 2 through base + 8: reads two
  bytes past the checked range, was accepted;
- the same as the second with data_meta pointers checked against data:
  was accepted.

These pass with and without the fix and cover nearby paths:

- subtract an unknown scalar from a checked pointer and load below it
  (the range is kept across a new id);
- reach a load through two paths whose checks cover 8 and 7 bytes after
  the loaded pointer; the second path must not be pruned by the first;
- spill a copy of a pointer, check the pointer, fill the copy and load
  one byte past the checked range: the load is refused, and the copy
  has the range of the check.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20261001145255.855630-2-alexei.starovoitov@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>

1 files changed, 63 insertions, 0 deletions

diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
new file mode 100644
index 000000000..6f5798b27
--- /dev/null
+++ b/drivers/fpga/Makefile
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the fpga framework and fpga manager drivers.
+#
+
+# Core FPGA Manager Framework
+obj-$(CONFIG_FPGA)			+= fpga-mgr.o
+
+# FPGA Manager Drivers
+obj-$(CONFIG_FPGA_MGR_ALTERA_CVP)	+= altera-cvp.o
+obj-$(CONFIG_FPGA_MGR_ALTERA_PS_SPI)	+= altera-ps-spi.o
+obj-$(CONFIG_FPGA_MGR_ICE40_SPI)	+= ice40-spi.o
+obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI)	+= machxo2-spi.o
+obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
+obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10)	+= socfpga-a10.o
+obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC)	+= stratix10-soc.o
+obj-$(CONFIG_FPGA_MGR_TS73XX)		+= ts73xx-fpga.o
+obj-$(CONFIG_FPGA_MGR_XILINX_CORE)	+= xilinx-core.o
+obj-$(CONFIG_FPGA_MGR_XILINX_SELECTMAP)	+= xilinx-selectmap.o
+obj-$(CONFIG_FPGA_MGR_XILINX_SPI)	+= xilinx-spi.o
+obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
+obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA)	+= zynqmp-fpga.o
+obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA)	+= versal-fpga.o
+obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI)	+= microchip-spi.o
+obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG)	+= lattice-sysconfig.o
+obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG_SPI)	+= lattice-sysconfig-spi.o
+obj-$(CONFIG_ALTERA_PR_IP_CORE)		+= altera-pr-ip-core.o
+obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT)	+= altera-pr-ip-core-plat.o
+obj-$(CONFIG_FPGA_MGR_EFINIX_SPI)	+= efinix-spi.o
+
+# FPGA Secure Update Drivers
+obj-$(CONFIG_FPGA_M10_BMC_SEC_UPDATE)	+= intel-m10-bmc-sec-update.o
+
+# FPGA Bridge Drivers
+obj-$(CONFIG_FPGA_BRIDGE)		+= fpga-bridge.o
+obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE)	+= altera-hps2fpga.o altera-fpga2sdram.o
+obj-$(CONFIG_ALTERA_FREEZE_BRIDGE)	+= altera-freeze-bridge.o
+obj-$(CONFIG_XILINX_PR_DECOUPLER)	+= xilinx-pr-decoupler.o
+
+# High Level Interfaces
+obj-$(CONFIG_FPGA_REGION)		+= fpga-region.o
+obj-$(CONFIG_OF_FPGA_REGION)		+= of-fpga-region.o
+
+# FPGA Device Feature List Support
+obj-$(CONFIG_FPGA_DFL)			+= dfl.o
+obj-$(CONFIG_FPGA_DFL_FME)		+= dfl-fme.o
+obj-$(CONFIG_FPGA_DFL_FME_MGR)		+= dfl-fme-mgr.o
+obj-$(CONFIG_FPGA_DFL_FME_BRIDGE)	+= dfl-fme-br.o
+obj-$(CONFIG_FPGA_DFL_FME_REGION)	+= dfl-fme-region.o
+obj-$(CONFIG_FPGA_DFL_AFU)		+= dfl-afu.o
+
+dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o dfl-fme-error.o
+dfl-fme-objs += dfl-fme-perf.o
+dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
+dfl-afu-objs += dfl-afu-error.o
+
+obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000)	+= dfl-n3000-nios.o
+
+# Drivers for FPGAs which implement DFL
+obj-$(CONFIG_FPGA_DFL_PCI)		+= dfl-pci.o
+
+# KUnit tests
+obj-$(CONFIG_FPGA_KUNIT_TESTS)		+= tests/