thunderbolt: Fix NULL dereference in tb_remove_work()grafted

There is a slight race between tb_remove_work() and tb_domain_remove()
which leads to dereferencing a NULL tb->root_switch pointer inside
tb_free_unplugged_xdomains():

        Thread A                            Thread B

  tb_remove_work()
                                    tb_domain_remove()
                                      mutex_lock(&tb->lock)
                                      tb_stop()
                                        /* doesn't cancel a running callback */
                                        cancel_delayed_work(&tcm->remove_work)
                                        ...
                                        tb_switch_remove(tb->root_switch)
                                        tb->root_switch = NULL
                                      mutex_unlock(&tb->lock)
    mutex_lock(&tb->lock)
    ...
    /* without checking ->root_switch */
    tb_free_unplugged_xdomains(tb->root_switch)
    mutex_unlock(&tb->lock)

Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without
holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains()
out of the &tb->lock section and the check for tb->root_switch, in
particular.  It states:

  For this reason separate removing the XDomain from the topology data
  structures (where we need the lock) from unregistering the device from
  the bus (where remove callbacks of the drivers are being called).

tb_free_unplugged_xdomains() belongs to the former group of functions
requiring the lock.  And it also calls tb_xdomain_remove() which should
only be called with &tb->lock held.

Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.

Fixes: a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without holding tb->lock")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

1 files changed, 140 insertions, 0 deletions

diff --git a/drivers/firmware/sysfb_simplefb.c b/drivers/firmware/sysfb_simplefb.c
new file mode 100644
index 000000000..71f542e37
--- /dev/null
+++ b/drivers/firmware/sysfb_simplefb.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Generic System Framebuffers
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ */
+
+/*
+ * simple-framebuffer probing
+ * Try to convert "screen_info" into a "simple-framebuffer" compatible mode.
+ * If the mode is incompatible, we return "false" and let the caller create
+ * legacy nodes instead.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+#include <linux/sysfb.h>
+
+static const char simplefb_resname[] = "BOOTFB";
+static const struct simplefb_format formats[] = SIMPLEFB_FORMATS;
+
+/* try parsing screen_info into a simple-framebuffer mode struct */
+__init bool sysfb_parse_mode(const struct screen_info *si,
+			     struct simplefb_platform_data *mode)
+{
+	__u8 type;
+	u32 bits_per_pixel;
+	unsigned int i;
+
+	type = si->orig_video_isVGA;
+	if (type != VIDEO_TYPE_VLFB && type != VIDEO_TYPE_EFI)
+		return false;
+
+	bits_per_pixel = __screen_info_lfb_bits_per_pixel(si);
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		const struct simplefb_format *f = &formats[i];
+
+		if (f->transp.length)
+			continue; /* transparent formats are unsupported by VESA/EFI */
+
+		if (bits_per_pixel == f->bits_per_pixel &&
+		    si->red_size == f->red.length &&
+		    si->red_pos == f->red.offset &&
+		    si->green_size == f->green.length &&
+		    si->green_pos == f->green.offset &&
+		    si->blue_size == f->blue.length &&
+		    si->blue_pos == f->blue.offset) {
+			mode->format = f->name;
+			mode->width = si->lfb_width;
+			mode->height = si->lfb_height;
+			mode->stride = si->lfb_linelength;
+			return true;
+		}
+	}
+
+	return false;
+}
+
+__init struct platform_device *sysfb_create_simplefb(const struct screen_info *si,
+						     const struct simplefb_platform_data *mode,
+						     struct device *parent)
+{
+	struct platform_device *pd;
+	struct resource res;
+	u64 base, size;
+	u32 length;
+	int ret;
+
+	/*
+	 * If the 64BIT_BASE capability is set, ext_lfb_base will contain the
+	 * upper half of the base address. Assemble the address, then make sure
+	 * it is valid and we can actually access it.
+	 */
+	base = si->lfb_base;
+	if (si->capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+		base |= (u64)si->ext_lfb_base << 32;
+	if (!base || (u64)(resource_size_t)base != base) {
+		printk(KERN_DEBUG "sysfb: inaccessible VRAM base\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	/*
+	 * Don't use lfb_size as IORESOURCE size, since it may contain the
+	 * entire VMEM, and thus require huge mappings. Use just the part we
+	 * need, that is, the part where the framebuffer is located. But verify
+	 * that it does not exceed the advertised VMEM.
+	 * Note that in case of VBE, the lfb_size is shifted by 16 bits for
+	 * historical reasons.
+	 */
+	size = si->lfb_size;
+	if (si->orig_video_isVGA == VIDEO_TYPE_VLFB)
+		size <<= 16;
+	length = mode->height * mode->stride;
+	if (length > size) {
+		printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n");
+		return ERR_PTR(-EINVAL);
+	}
+	length = PAGE_ALIGN(length);
+
+	/* setup IORESOURCE_MEM as framebuffer memory */
+	memset(&res, 0, sizeof(res));
+	res.flags = IORESOURCE_MEM;
+	res.name = simplefb_resname;
+	res.start = base;
+	res.end = res.start + length - 1;
+	if (res.end <= res.start)
+		return ERR_PTR(-EINVAL);
+
+	pd = platform_device_alloc("simple-framebuffer", 0);
+	if (!pd)
+		return ERR_PTR(-ENOMEM);
+
+	pd->dev.parent = parent;
+
+	sysfb_set_efifb_fwnode(si, pd);
+
+	ret = platform_device_add_resources(pd, &res, 1);
+	if (ret)
+		goto err_put_device;
+
+	ret = platform_device_add_data(pd, mode, sizeof(*mode));
+	if (ret)
+		goto err_put_device;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		goto err_put_device;
+
+	return pd;
+
+err_put_device:
+	platform_device_put(pd);
+
+	return ERR_PTR(ret);
+}