Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

3 files changed, 380 insertions, 0 deletions

diff --git a/drivers/firmware/meson/Kconfig b/drivers/firmware/meson/Kconfig
new file mode 100644
index 000000000..179f5d46d
--- /dev/null
+++ b/drivers/firmware/meson/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Amlogic Secure Monitor driver
+#
+config MESON_SM
+	tristate "Amlogic Secure Monitor driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	default ARCH_MESON
+	depends on ARM64_4K_PAGES
+	help
+	  Say y here to enable the Amlogic secure monitor driver
diff --git a/drivers/firmware/meson/Makefile b/drivers/firmware/meson/Makefile
new file mode 100644
index 000000000..c6c09483b
--- /dev/null
+++ b/drivers/firmware/meson/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_MESON_SM) +=	meson_sm.o
diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
new file mode 100644
index 000000000..ab9751a59
--- /dev/null
+++ b/drivers/firmware/meson/meson_sm.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic Secure Monitor driver
+ *
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#define pr_fmt(fmt) "meson-sm: " fmt
+
+#include <linux/arm-smccc.h>
+#include <linux/bug.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/property.h>
+#include <linux/types.h>
+#include <linux/sizes.h>
+ #include <linux/slab.h>
+
+#include <linux/firmware/meson/meson_sm.h>
+
+struct meson_sm_cmd {
+	unsigned int index;
+	u32 smc_id;
+};
+#define CMD(d, s) { .index = (d), .smc_id = (s), }
+
+struct meson_sm_chip {
+	unsigned int shmem_size;
+	u32 cmd_shmem_in_base;
+	u32 cmd_shmem_out_base;
+	struct meson_sm_cmd cmd[];
+};
+
+static const struct meson_sm_chip gxbb_chip = {
+	.shmem_size		= SZ_4K,
+	.cmd_shmem_in_base	= 0x82000020,
+	.cmd_shmem_out_base	= 0x82000021,
+	.cmd = {
+		CMD(SM_EFUSE_READ,		0x82000030),
+		CMD(SM_EFUSE_WRITE,		0x82000031),
+		CMD(SM_EFUSE_USER_MAX,	0x82000033),
+		CMD(SM_GET_CHIP_ID,		0x82000044),
+		CMD(SM_THERMAL_CALIB_READ,	0x82000047),
+		CMD(SM_A1_PWRC_SET,		0x82000093),
+		CMD(SM_A1_PWRC_GET,		0x82000095),
+		{ /* sentinel */ },
+	},
+};
+
+struct meson_sm_firmware {
+	const struct meson_sm_chip *chip;
+	void __iomem *sm_shmem_in_base;
+	void __iomem *sm_shmem_out_base;
+};
+
+static u32 meson_sm_get_cmd(const struct meson_sm_chip *chip,
+			    unsigned int cmd_index)
+{
+	const struct meson_sm_cmd *cmd = chip->cmd;
+
+	while (cmd->smc_id && cmd->index != cmd_index)
+		cmd++;
+
+	return cmd->smc_id;
+}
+
+static s32 __meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2,
+			   u32 arg3, u32 arg4)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(cmd, arg0, arg1, arg2, arg3, arg4, 0, 0, &res);
+	return res.a0;
+}
+
+static void __iomem *meson_sm_map_shmem(u32 cmd_shmem, unsigned int size)
+{
+	u32 sm_phy_base;
+
+	sm_phy_base = __meson_sm_call(cmd_shmem, 0, 0, 0, 0, 0);
+	if (!sm_phy_base)
+		return NULL;
+
+	return ioremap_cache(sm_phy_base, size);
+}
+
+/**
+ * meson_sm_call - generic SMC32 call to the secure-monitor
+ *
+ * @fw:		Pointer to secure-monitor firmware
+ * @cmd_index:	Index of the SMC32 function ID
+ * @ret:	Returned value
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	0 on success, a negative value on error
+ */
+int meson_sm_call(struct meson_sm_firmware *fw, unsigned int cmd_index,
+		  s32 *ret, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 cmd;
+	s32 lret;
+
+	if (!fw->chip)
+		return -ENOENT;
+
+	cmd = meson_sm_get_cmd(fw->chip, cmd_index);
+	if (!cmd)
+		return -EINVAL;
+
+	lret = __meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
+
+	if (ret)
+		*ret = lret;
+
+	return 0;
+}
+EXPORT_SYMBOL(meson_sm_call);
+
+/**
+ * meson_sm_call_read - retrieve data from secure-monitor
+ *
+ * @fw:		Pointer to secure-monitor firmware
+ * @buffer:	Buffer to store the retrieved data
+ * @bsize:	Size of the buffer
+ * @cmd_index:	Index of the SMC32 function ID
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	size of read data on success, a negative value on error
+ *		When 0 is returned there is no guarantee about the amount of
+ *		data read and bsize bytes are copied in buffer.
+ */
+int meson_sm_call_read(struct meson_sm_firmware *fw, void *buffer,
+		       unsigned int bsize, unsigned int cmd_index, u32 arg0,
+		       u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	s32 size;
+	int ret;
+
+	if (!fw->chip)
+		return -ENOENT;
+
+	if (!fw->chip->cmd_shmem_out_base)
+		return -EINVAL;
+
+	if (bsize > fw->chip->shmem_size)
+		return -EINVAL;
+
+	if (meson_sm_call(fw, cmd_index, &size, arg0, arg1, arg2, arg3, arg4) < 0)
+		return -EINVAL;
+
+	if (size < 0 || size > bsize)
+		return -EINVAL;
+
+	ret = size;
+
+	/* In some cases (for example GET_CHIP_ID command),
+	 * SMC doesn't return the number of bytes read, even
+	 * though the bytes were actually read into sm_shmem_out.
+	 * So this check is needed.
+	 */
+	if (!size)
+		size = bsize;
+
+	if (buffer)
+		memcpy(buffer, fw->sm_shmem_out_base, size);
+
+	return ret;
+}
+EXPORT_SYMBOL(meson_sm_call_read);
+
+/**
+ * meson_sm_call_write - send data to secure-monitor
+ *
+ * @fw:		Pointer to secure-monitor firmware
+ * @buffer:	Buffer containing data to send
+ * @size:	Size of the data to send
+ * @cmd_index:	Index of the SMC32 function ID
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	size of sent data on success, a negative value on error
+ */
+int meson_sm_call_write(struct meson_sm_firmware *fw, void *buffer,
+			unsigned int size, unsigned int cmd_index, u32 arg0,
+			u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	s32 written;
+
+	if (!fw->chip)
+		return -ENOENT;
+
+	if (size > fw->chip->shmem_size)
+		return -EINVAL;
+
+	if (!fw->chip->cmd_shmem_in_base)
+		return -EINVAL;
+
+	memcpy(fw->sm_shmem_in_base, buffer, size);
+
+	if (meson_sm_call(fw, cmd_index, &written, arg0, arg1, arg2, arg3, arg4) < 0)
+		return -EINVAL;
+
+	if (written <= 0 || written > size)
+		return -EINVAL;
+
+	return written;
+}
+EXPORT_SYMBOL(meson_sm_call_write);
+
+/**
+ * meson_sm_get - get pointer to meson_sm_firmware structure.
+ *
+ * @sm_node:		Pointer to the secure-monitor Device Tree node.
+ *
+ * Return:		NULL is the secure-monitor device is not ready.
+ */
+struct meson_sm_firmware *meson_sm_get(struct device_node *sm_node)
+{
+	struct platform_device *pdev = of_find_device_by_node(sm_node);
+	struct meson_sm_firmware *fw;
+
+	if (!pdev)
+		return NULL;
+
+	fw = platform_get_drvdata(pdev);
+
+	put_device(&pdev->dev);
+
+	return fw;
+}
+EXPORT_SYMBOL_GPL(meson_sm_get);
+
+/**
+ * meson_sm_get_thermal_calib - Read thermal sensor calibration data.
+ * @fw:		Pointer to secure-monitor firmware.
+ * @trim_info:	Pointer to store the returned calibration data.
+ * @tsensor_id:	Sensor index to identify which sensor's calibration data
+ *		to retrieve
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int meson_sm_get_thermal_calib(struct meson_sm_firmware *fw, u32 *trim_info,
+			       u32 tsensor_id)
+{
+	return meson_sm_call(fw, SM_THERMAL_CALIB_READ, trim_info, tsensor_id,
+			     0, 0, 0, 0);
+}
+EXPORT_SYMBOL_GPL(meson_sm_get_thermal_calib);
+
+#define SM_CHIP_ID_LENGTH	119
+#define SM_CHIP_ID_OFFSET	4
+#define SM_CHIP_ID_SIZE		12
+
+static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct meson_sm_firmware *fw;
+	uint8_t *id_buf;
+	int ret;
+
+	fw = platform_get_drvdata(pdev);
+
+	id_buf = kmalloc(SM_CHIP_ID_LENGTH, GFP_KERNEL);
+	if (!id_buf)
+		return -ENOMEM;
+
+	ret = meson_sm_call_read(fw, id_buf, SM_CHIP_ID_LENGTH, SM_GET_CHIP_ID,
+				 0, 0, 0, 0, 0);
+	if (ret < 0) {
+		kfree(id_buf);
+		return ret;
+	}
+
+	ret = sprintf(buf, "%12phN\n", &id_buf[SM_CHIP_ID_OFFSET]);
+
+	kfree(id_buf);
+
+	return ret;
+}
+
+static DEVICE_ATTR_RO(serial);
+
+static struct attribute *meson_sm_sysfs_attrs[] = {
+	&dev_attr_serial.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(meson_sm_sysfs);
+
+static const struct of_device_id meson_sm_ids[] = {
+	{ .compatible = "amlogic,meson-gxbb-sm", .data = &gxbb_chip },
+	{ /* sentinel */ },
+};
+
+static int __init meson_sm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct meson_sm_chip *chip;
+	struct meson_sm_firmware *fw;
+
+	fw = devm_kzalloc(dev, sizeof(*fw), GFP_KERNEL);
+	if (!fw)
+		return -ENOMEM;
+
+	chip = device_get_match_data(dev);
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->cmd_shmem_in_base) {
+		fw->sm_shmem_in_base = meson_sm_map_shmem(chip->cmd_shmem_in_base,
+							  chip->shmem_size);
+		if (WARN_ON(!fw->sm_shmem_in_base))
+			goto out;
+	}
+
+	if (chip->cmd_shmem_out_base) {
+		fw->sm_shmem_out_base = meson_sm_map_shmem(chip->cmd_shmem_out_base,
+							   chip->shmem_size);
+		if (WARN_ON(!fw->sm_shmem_out_base))
+			goto unmap_in_base;
+	}
+
+	fw->chip = chip;
+
+	platform_set_drvdata(pdev, fw);
+
+	if (devm_of_platform_populate(dev))
+		goto unmap_out_base;
+
+	pr_info("secure-monitor enabled\n");
+
+	return 0;
+
+unmap_out_base:
+	iounmap(fw->sm_shmem_out_base);
+unmap_in_base:
+	iounmap(fw->sm_shmem_in_base);
+out:
+	return -EINVAL;
+}
+
+static struct platform_driver meson_sm_driver = {
+	.driver = {
+		.name = "meson-sm",
+		.of_match_table = of_match_ptr(meson_sm_ids),
+		.dev_groups = meson_sm_sysfs_groups,
+	},
+};
+module_platform_driver_probe(meson_sm_driver, meson_sm_probe);
+MODULE_DESCRIPTION("Amlogic Secure Monitor driver");
+MODULE_LICENSE("GPL v2");