x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 85 insertions, 0 deletions

diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig
new file mode 100644
index 000000000..b78c644fa
--- /dev/null
+++ b/drivers/firmware/google/Kconfig
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig GOOGLE_FIRMWARE
+	bool "Google Firmware Drivers"
+	default n
+	help
+	  These firmware drivers are used by Google servers,
+	  Chromebooks and other devices using coreboot firmware.
+	  If in doubt, say "N".
+
+if GOOGLE_FIRMWARE
+
+config GOOGLE_SMI
+	tristate "SMI interface for Google platforms"
+	depends on X86 && ACPI && DMI
+	help
+	  Say Y here if you want to enable SMI callbacks for Google
+	  platforms.  This provides an interface for writing to and
+	  clearing the event log.  If CONFIG_EFI is also enabled this
+	  driver provides an interface for reading and writing NVRAM
+	  variables.
+
+config GOOGLE_CBMEM
+	tristate "CBMEM entries in sysfs"
+	depends on GOOGLE_COREBOOT_TABLE
+	help
+	  CBMEM is a downwards-growing memory region created by the
+	  Coreboot BIOS containing tagged data structures from the
+	  BIOS.  These data structures expose things like the verified
+	  boot firmware variables, flash layout, firmware event log,
+	  and more.
+
+	  This option enables the cbmem module, which causes the
+	  kernel to search for Coreboot CBMEM entries, and expose the
+	  memory for each entry in sysfs under
+	  /sys/bus/coreboot/devices/cbmem-<id>.
+
+config GOOGLE_COREBOOT_TABLE
+	tristate "Coreboot Table Access"
+	depends on HAS_IOMEM && (ACPI || OF)
+	help
+	  This option enables the coreboot_table module, which provides other
+	  firmware modules access to the coreboot table. The coreboot table
+	  pointer is accessed through the ACPI "GOOGCB00" object or the
+	  device tree node /firmware/coreboot.
+	  If unsure say N.
+
+config GOOGLE_MEMCONSOLE
+	tristate
+	depends on GOOGLE_MEMCONSOLE_X86_LEGACY || GOOGLE_MEMCONSOLE_COREBOOT
+
+config GOOGLE_MEMCONSOLE_X86_LEGACY
+	tristate "Firmware Memory Console - X86 Legacy support"
+	depends on X86 && ACPI && DMI
+	select GOOGLE_MEMCONSOLE
+	help
+	  This option enables the kernel to search for a firmware log in
+	  the EBDA on Google servers.  If found, this log is exported to
+	  userland in the file /sys/firmware/log.
+
+config GOOGLE_FRAMEBUFFER_COREBOOT
+	tristate "Coreboot Framebuffer"
+	depends on GOOGLE_COREBOOT_TABLE
+	help
+	  This option enables the kernel to search for a framebuffer in
+	  the coreboot table.  If found, it is registered with a platform
+	  device of type coreboot-framebuffer. Using the old device of
+	  type simple-framebuffer is deprecated.
+
+config GOOGLE_MEMCONSOLE_COREBOOT
+	tristate "Firmware Memory Console"
+	depends on GOOGLE_COREBOOT_TABLE
+	select GOOGLE_MEMCONSOLE
+	help
+	  This option enables the kernel to search for a firmware log in
+	  the coreboot table.  If found, this log is exported to userland
+	  in the file /sys/firmware/log.
+
+config GOOGLE_VPD
+	tristate "Vital Product Data"
+	depends on GOOGLE_COREBOOT_TABLE
+	help
+	  This option enables the kernel to expose the content of Google VPD
+	  under /sys/firmware/vpd.
+
+endif # GOOGLE_FIRMWARE